Apple have just replaced aMLB $945 aus. as my macbook pro graphics card failed. but 4 weeks later the screen has gone blank .i will take it in as the Mlb is still under warranty. could the MLB be damaged or worn out.?
what do you suppose is wrong with my macbook pro seeing as the apple store have just replaced a MLB at $945aus because of a failed graphic card. the new one they replaced lasted 4 weeks and again a blank screen.
You have a 90 day warranty after your machine has been repaired. Call the Apple Store/AASP and have them take another look at it.
Good luck,
Clinton
Similar Messages
-
I dropped my iphone 3gs and the screen has gone blank now showing a white screen with no icons can anyone advise me how to fix it?
Tim is correct.
But, first step with 3GS white screen and most iPhone problems is Reset, hold both home and power buttons until iPhone begins to restart itself, usually about 10 seconds of holding both buttons. If still white screen.
Next step would be Restore the iPhone Firmware with iTunes on your computer. If still white screen.
Next step would be to follow Tim's advice, if you had not already. -
Has worked fine since I received it as a gift. It also worked fine up until the time the screen started with vertical lines then the screen went blank. any help would be appreciated. It still plays music when I can find it, with the screen blank it is difficult to find. thanks
Becaise the digitizer is broken in that area
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
My mac mini is connected to my panasonic LCD and the screen has gone blank
So here's what I did.
I plugged my old mac mini (10.4.11) to my Panasonic Viera LCD flat screen with a VGA cable. When it loaded up and i logged in i noticed the screen sizing looked odd - as in looked stetched. I then jumped into the display settings and must have clicked on of the options which for some unknown (to me anyay) reason the screen just went blank. I then cannot do anything as I cant see anything. If I turn it off and turn it back on again then its all good as before untill I have logged in and it loads the desktop - then it goes blank again.
Any ideas?Look for a solution here:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
I Have an iPad 2 the screen has gone blank, I have held both home and off button but nothing working the screens still blank. I have also reset my iPad via iTunes but now the screen is blank but it's flashes white and you can vaguely see hello, hallo in all different languages. Can anyone please help?
Is it fully charged?
The computer usb port will not charge it. Plug it into an outlet with the charger that came with it for a few hours & try again. -
Iphone 5 won't charge unless I wiggle the cable around to fine a spot where it works. It's not the cable/charger as it works perfectly in other iPhone 5's. I haven't even had it a year so it's still under warranty and the phone is in very good condition and has never been abused/dropped etc. I'm taking it into apple tomorrow for an appointment. Has anyone had this problem? if so, what happens? thanks
I had the same problem and took my iPhone 5 into the Apple store. What happened was a little embarrassing. The genius took out a "special tool" (a paper clip) and began digging out an unimaginable amount of lint from the lightning connector port. After that I was able to connect the cord and charge without any issues.
A few days after, I realized that my problems associated with the remote/mic not working on my ear pods might be due to the same issue. (The volume and action buttons on the ear pods sometimes were not responsive) I grabbed a paper clip and began digging. Again, a large wad of lint came out of the headphone port and my ear pods have worked perfectly since. -
I have just upgraded to 10.8 on my macbook pro and now I can't access itunes, videos and there is no sound - anyone help?
It is an old macbook pro probably 6yo with the back lit keys - not under applecare anymore obviously. I downloaded the upgrade last night which took quite a while longer than it should have.
Anyone else experienced this and can suggest something? many thanks JoRun Software Update, wait till all the updates have finished downloading then restart the mac.
-
The screen on my iPad 2 has gone blank.i can't tell whether my iPad is on or not. When the screen went blank there was 97% battery. Could anyone possible give me an idea as to what May have happened and if it can be fixed.
Thank you, Nicky .Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I was typing an email to friend. I put the ipad down to answer the door and came back a few minutes later and the screen had gone blank and when I tried to get the message that I was typing back I could not find it. The message contained a lot of text and pictures. How can I find it? I have looked in drafts.
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Udating my ipa and the screen has gone black with just the apple logo and an updat bar. I cant turn it on/off.
TRY THIS TRICK.... IT HAS HELPED ME SO MANY TIMES!!!
hold down the power button and the home button for about 6-8 seconds or until the screen goes black.... -
My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)
Hey Carolinearnold!
I have an article for you that seems to address this issue and can provide some troubleshooting steps for you:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls
FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.
-
The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk. -
My iphone 4 screen has gone blank but the thone is still on.
My iphone 4 screen has gone blank but the thone is still on.
Hey NJF7,
Thanks for the question. After reviewing your post, it sounds like the screen is black. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iPhone: Hardware troubleshooting
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?
Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599
Maybe you are looking for
-
I keep getting Kernel Panic when I try to install Panther
Hello! I bought a used iMac from eBay. It's a 500mhz Indigo model with CDRW. It has Jaguar and OS9 installed on it and I want to install Panther. When I try to do the install the computer reboots and I get the Kernel Panic. I just want to wipe out wh
-
Small tablet/laptop for LR use
What new small portable devices will run Lightroom 4? Looking for a good tablet/laptop for travel as a professional photographer, hoping for something in the windows market that isn't too pricey. Thanks for any suggestions
-
How do I identify the actual /dev nodes in use by ASM?
I'm using ASM on LUNs from an EMC SAN, fronted by PowerPath. Right now I have only one fiber path to the SAN, so /dev/emcpowera3 maps directly to /dev/sda3, for example. Oracle had a typo in what they told me to do in /etc/sysconfig/oracleasm*, so th
-
Use of RFC /SAPSLL/API_6800_SYNCH_MASS
Hello All, In one of my project reports I saw an RFC /SAPSLL/API_6800_SYNCH_MASS . Can anyone tell me what this RFC will do. This RFC is not there in my system. I checked in both 4.6B and ECC6.0 . Please find the code below. CALL FUNCTION '/SAPSLL
-
Dreamweaver CS6 for HTML5?
Wow, 27 minutes hold-time to call Adobe for pre-sales support! I'm a long-time Dreamweaver user currently using CS4. My customers are increasingly asking me to develop websites that will display properly on Androids and iPhones (less often Blackberri