Apple Raid dropping off when doing most data renders

Apple Raid, fully occupied, 3 TB is dropping off when doing renders. Unit is connected via fiber to Mac intel running FCP 7, OS 10.6. Problem has been going on a for a while. Drive will sometimes drop off, when no renders are occurring. Also, drive performance is slower. Although drives are striped all the way accross, front performance meters, do not operate together. Any thoughts as to what is not working?

When the disconnect happens, what does your system log report? Have you logged into Raid Admin and checked the device logs? What do they report?

Similar Messages

Sound drops off when using hdmi outport to connect computer to an AV reciever

Satellite M640,I5 2410 processor, windows 7HP. After about three minutes the sound drops off when connected to the av reciever through the hdmi outport. If I touch the trackpad the computer reconnects for another three minutes and then disconnects. If I touch the the trackpad about every two minutes the computer stays connected indefinetly. This problem does not occur if I use the computer to play an audio CD. Any fix suggestions.

Hi peter,
try to repair your permission by open application folder > utilities > disk utility > repair permission.
It should fixed the unexpectedly quit for several applications.
And try to get latest info from Griffin sites, maybe this one will help too:
http://www.griffintechnology.com/support/article.php?artnum=314
ps: why not try macbook built in microphone?
Good Luck.

Apple TV powers off when not in use

My Apple TV turns off when not in use and needs to be rebooted by unplugging device to "wake" it up How do I avoid this?

All ATVs go into sleep mode when not in use.
Simply pressing the power button on the remote should wake the device up, is that not occurring?

Audio suddenly drop off when Airplaying video into Apple TV

I´m trying to stream the content from my MacBook Air into my TV via my Apple TV using Airplay. Both audio and video work fine the first seconds on the TV then, suddenly, the sound drops off.
All the sw is updated, the problem began after the latest Apple TV update.
Does anybody have any ideas on how to solve this ?? (The solutions exposed in other threads doesn´t solve my problem)
Thank you in advance

+I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
+If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
A used Mini will usually lack the Apple warranty.
Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software.

Why does Apple TV drop off my network and have to be restarted to reappear?

My Apple TV constantly drops off my Airplay menus on both iMacs, two iPads, and two iPhones. It will reappear when I restart it, but it will diaper after being activated. Also, I can't access my home-sharing-enabled computers from the Apple TV menu unless I restart it. This happens every time I try to use it either to use it for AirPlay or Home Sharing.

The Apple TV is connected to my network on ethernet. After the Apple TV has restarted it will work for a while until it is either unselected from AirPlay or until after the movie is finished and I have disconnected it from home sharing. It's just inconvenient to have to restart it every time you want to use it.

Price drops off when vendor changes

Hi
While creating shopping cart, when the vendor is changed, the price is getting dropped off. The vendor is assigned to a contract item/product category.
Any clue on what could be the reason for this?
Regards
Rajeev

Hi
We have faced similar issues in our previous SRM implementation.
Which sRM version are you using ?
Couple of rerasons can be possible here ->
1) Missing Authorization to the user roles (Employee / Approver or Manager / Buyer role). Are you using standard SAP roles or using Z roles in PFCG transaction ? Ask BASIS to help you out.
2) BADIs implemented incorrectly.
Mostly it is due to following BADIs ->
BBP_DOC_CHANGE_BADI
BBP_ITEM_CHANGE_BADI
BBP_APPEND_ITEM
BBP_DOC_CHECK_BADI
Check the logic again carefully.
3) Organization structure settings in PPOMA_BBP for the user (Approving limit / Spending limit attributes not mainteined correctly for the users)
Or
Alternatively, in the SU01 transaction for the particular user (Employee / Buyer / Manager), in the Personalization tab, the Approving limit / Spending limit attributes not mainteined correctly.
4) Try de-activating all the Custom BADI Implemenatations using SE19 Transaction, (Name of the BADI starting with Y or Z ). Teh ntry again creating a new shopping cart with the same steps.
5) Check for Sourcing and pricing conditions as well.
6) A problem during the PO transfer. Check if there is any logs in SLG1 under user WF-BATCH at the time of the po creation. You may find some more information or explaination.
<b>Please go through the following SAP OSS Notes, which definitely will help.</b>
<u>
Note 993214 - Simplified pricing: Price becoming Zero in Sourcing Cockpit
Note 744020 - Catalog price is lost if purchase order is changed
Note 991260
Note 975313 BBPSOCO01: Change of Price not reflected in SC data
Note 1034949 Wrong price in SC when a product has multiple conditions
Note 1027656 Simplified pricing:wrong price calculation in SC using prod.
Note 550071 FAQ: EBP - Shopping Cart
Note 1015317 Price for PO free text item transfered from SC not updated
Note 836774 Incorrect price after contract assignment in SC and PO
Note 550071
</u>
Incase it does not help, please raise an OSS message with SAP.
Do update me as well.
Regards
- Atul

Apple TV drops off network.

Apple TV returns the error ATV-N.P.LASU1 from the Netflix App after which time it is no longer visible on my network and cannot be reached using the Remote App on iOS 6. This seems to be recent behavior resulting from an update to Apple TV or iOS 6 itself. Previously Netflix errors did not seem to cause the same connection problem with the Remote App.
Steps to reproduce
1) watch something on netflix
2) netflix times out or program ends
3) trying to return to menu causes error above
4) you cannot exit netflix and return to main Apple TV menu
5) remote app stops connecting
I bought a regular Apple Remote to replace the long lost original and the AppleTV responds to this remote (of course it is infrared) but you still cannot exit the Netflix App.
Rebooting the Apple TV solves the problem. Waitng an indeterminate amount of time *sometimes* solves the problem when Netflix seems to clear its own network issue.
Oh by the way, 2nd Gen Apple TV is connected via a switch to an ethernet port on a Time Capsule. And this setup has worked fine for several years.
Anyone know of a more permanent fix for this? Apple are you listening?

Sightly diff. setup, but same dropped-network symptoms. ATV2 drops off the wireless or wired network every few hours. A restart thru the ATV menu fixes it. ATV3 running of the same wireless works fine. ATV2 is back on FW 5.0.1, ATV3 is on 5.1. Could be related, but the ATV2 had been running fine like that for a long time!

Apple Devices Dropping Off Wireless Network

Hello, I have recently deployed a wireless network using a WLC 2504 with 21 Light APs. All seems fine except that
Apple Devices drop their connections every 15 minutes or so. A couple of minutes later they can reconnect but
obviously something is wrong.
Many Thanks

Only Apple device exhibit this kind of behaviour?
What kind of Apple devices? Mac laptops? iPad, iTouch, iPhone?
Have you seen this behaviour from, say, non-Apple devices? Android? Windows laptops?
What are the signal strengths when this happens?
Do you have Aironet IE enabled?
How far are the clients from the WAP(s)?

Value gets doubled in the cube when doing a data mart

Hi,
I am doing a data mart from one cube to another cube for different consolidation units and the value gets doubled for all the consolidation units except for one consolidation unit.there are no duplicate results in the cube.
Can anyone tell me how i can debug this issue or what could be the reasons,This is very urgent.
Thnaks and Regards,
Subha

In the Cube that is being loaded try seeing its content. While seeing its content give the restriction on the Request ID as that of the request which loaded the Cube.
If you find the consolidation unit values doubled there, try seeing your update rule and transfer rule if the value is being changed anywhere.
Then check the PSA.
Hope that helps.
Regards.

Why does apple tv drop out when music playing but movies ok ?

wifi signal is 3 from 5 so seems ok
movies play back ok
music replay will drop out/stop occasionally
playing from my macbook pro and itunes

The Apple TV is connected to my network on ethernet. After the Apple TV has restarted it will work for a while until it is either unselected from AirPlay or until after the movie is finished and I have disconnected it from home sharing. It's just inconvenient to have to restart it every time you want to use it.

File crashes when doing a data merge

Doing an NCR job and trying to number 1-1000. The file merges all the way to the end. I get no overset text prompt, go to close the file and it crashes everytime. I thought it might be a font error so I made the order form a PDF and the font for the numbering is plain vanilla times. Same result. I exported to idml to open in CS5 and the file immediately crashes upon opening. I'm hoping I don't have to recreate the form. Here is the error message:
Process:
Adobe InDesign CC [2594]
Path:
/Applications/Adobe InDesign CC/Adobe InDesign CC.app/Contents/MacOS/Adobe InDesign CC
Identifier:
com.adobe.InDesign
Version:
9.2.0.69 (9200)
Code Type:
X86-64 (Native)
Parent Process: launchd [199]
Responsible:
Adobe InDesign CC [2594]
User ID:
504
Date/Time:
2014-01-28 13:08:51.617 -0500
OS Version:
Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: B2799290-A45E-754F-3EB5-9D85F592E585
Sleep/Wake UUID: 0823B88E-389E-445F-987A-9A6000D71BB7
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
*** __CFTypeCollectionRetain() called with NULL; likely a collection has been corrupted **

Don't know if this is relevant but I made a custom format in excel so that the numbering is 5 digits with leading number always zero: 00001 - 01000 is what I should end up with when numbering is done. Screen shot of my file attached. I also turned off all my fonts in FAP and just used the times that the system installs. On a intel imac running 10.9.1 and CS Subscription.

Airport connection dropping off when computer sleeps

Starting with the latest 10.4.8 update my airport connection drops when the computer goes to sleep. No amount of configuring will get the computer to recognize my airport. Turning off the power to the airport, waiting, and re-connecting does no good. The only way to get wireless is to restart. Once restarted the airport connection is re-established without any configuration and continues to be fine until the computer goes to sleep. Hard wiring ethernet works at all times without problems.

thanks,
i read the doc, looked in the system prefs where my re-connect was set to "preferred" and there was only one wpa network listed. i deleted it from the list then re-added per the apple document. will see if this works.
in my own mind i don't think this is the solution but am keeping an open mind. the weird thing about my situation is that after the computer sleeps there are no available networks under the airport menu. i know in fact there are 4-6 in my area. after restarting the 4-6, including mine, networks are all there and my network has been connected to.

Apple TV cuts off when open Macbook. WHY IS THIS STILL AN ISSUE!!

The issue is not fixed with Apple and it's really annoying. It affects all devices. Here is what I have found so far and I'm pulling my hair out. APPLE!! why have you not had a fix for this yet? You come out with the latest and greatest devices but you can not keep what you already have running? Come on this is frustrating. Look at the number of times this question has been asked on here, heck look at the number of views its unreal at over 10,000. This is a huge issue and should be worked on ASAP. At least make us think you are trying to fix it. If there is some magical fix I have not been able to find it.
And because many people while trying to help ask the same questions to all these post I will try to answer all the typical questions now to save some time.
- Yes, I have tried it with Itunes off and it still does it so it is not an Itunes issue.
- No, I am not watching a movie from my Macbook to ATV and I shut the lid etc. Nothing is streaming from the Macbook to the TV when I have the issue.
- The ATV works perfectly fine so long as the Macbook lid stays closed or the WiFi is shut off.
- Yes, I have been able to watch ATV while the Macbook was open, Itunes both on and off, WiFi on and ATV played fine. The issue seems to be intermittent but now has gotten worse.
- It has done the same thing with two completely different routers.
- iCloud off - no change
- Homeshare off - no change
- iTunes off - no change
- I turned off Wifi while no show was playing on ATV. Turned WiFi back on then started a show on ATV while the lid was open. Show ran fine. I turned off WiFi on MB show still ran fine. I turned WiFi back on and it killed it. ATV went back to main menu. Tried to restart show without making any changes while lid open and show would not play.
- Logged out of iTunes account on ATV, tried to watch show went back to main menu, would not play.
Info
MBP
iTunes - 11.1.5 (even though not used or on)
OS X - 10.9.2
iPhone
Version 7.1
ATV
Software 6.1
Here is what I can or can not do at this point when my Macbook Pro is online with lid open.
1. ATV is running a show and roommates come home. Cuts out starts giving me issues. Have not confirmed if they are opening a mac or not but they all have iPhones.
2. Listening to podcast on ATV from my iPhone using Airplay to ATV. the broadcast will play perfectly fine until I open my macbook. At that point it cuts off completely and switches to phone output from ATV back to what it iPhone. Itunes on my Mac is turned completely off. If I turn off the WiFi connection on my MBP then the ATV Airplay on my phone works just fine. The audio will play to my ATV and will not switch back. The second I turn WiFi back on it kills the Audio and the phone goes back to normal mode. It does it right in front of my eyes. So something is causing it to switch back overriding it but it is not iTunes. Also one other thing I noticed if I try to force it by hitting the airplay button every time it try's to switch back the podcast info will flash on the ATV for a second like it is trying then it kills it and goes back to the phone.
3. ATV running a show and I open my Macbook, cuts off goes back to main screen even when itunes is off. If I close the lid and try it right away it will still go back to menu. If I try to select a program it will not play at all. Just flashes and goes back to main screen. I have to wait a few moments or try watching a different show then go back tot he one that was cut off for it to then work correctly.
NOW to add insult to injury I confirmed all of this then went along my menu bar at the bottom confirming everything was off and testing ATV every few until it started working. It started working after I turned off Skype, Word, Excel, and VLC. The show ran with the top open or shut or opening it while running. also connected and disconnected WiFi show ran fine. So I started turning everything back on one at a time opened and shut lid until ATV cut back to menu and nothing. Show has been running for last 5 minuets with out a hitch. I logged back in to iTunes on Apple TV tried again still works fine. Who knows when it will act up again.
This happens on Hulu Plus and HBO Go and Airplay on my phone. I really want to see this issue corrected there is no excuse for it this long after the release.

The issue is not fixed with Apple and it's really annoying. It affects all devices. Here is what I have found so far and I'm pulling my hair out. APPLE!! why have you not had a fix for this yet? You come out with the latest and greatest devices but you can not keep what you already have running? Come on this is frustrating. Look at the number of times this question has been asked on here, heck look at the number of views its unreal at over 10,000. This is a huge issue and should be worked on ASAP. At least make us think you are trying to fix it. If there is some magical fix I have not been able to find it.
And because many people while trying to help ask the same questions to all these post I will try to answer all the typical questions now to save some time.
- Yes, I have tried it with Itunes off and it still does it so it is not an Itunes issue.
- No, I am not watching a movie from my Macbook to ATV and I shut the lid etc. Nothing is streaming from the Macbook to the TV when I have the issue.
- The ATV works perfectly fine so long as the Macbook lid stays closed or the WiFi is shut off.
- Yes, I have been able to watch ATV while the Macbook was open, Itunes both on and off, WiFi on and ATV played fine. The issue seems to be intermittent but now has gotten worse.
- It has done the same thing with two completely different routers.
- iCloud off - no change
- Homeshare off - no change
- iTunes off - no change
- I turned off Wifi while no show was playing on ATV. Turned WiFi back on then started a show on ATV while the lid was open. Show ran fine. I turned off WiFi on MB show still ran fine. I turned WiFi back on and it killed it. ATV went back to main menu. Tried to restart show without making any changes while lid open and show would not play.
- Logged out of iTunes account on ATV, tried to watch show went back to main menu, would not play.
Info
MBP
iTunes - 11.1.5 (even though not used or on)
OS X - 10.9.2
iPhone
Version 7.1
ATV
Software 6.1
Here is what I can or can not do at this point when my Macbook Pro is online with lid open.
1. ATV is running a show and roommates come home. Cuts out starts giving me issues. Have not confirmed if they are opening a mac or not but they all have iPhones.
2. Listening to podcast on ATV from my iPhone using Airplay to ATV. the broadcast will play perfectly fine until I open my macbook. At that point it cuts off completely and switches to phone output from ATV back to what it iPhone. Itunes on my Mac is turned completely off. If I turn off the WiFi connection on my MBP then the ATV Airplay on my phone works just fine. The audio will play to my ATV and will not switch back. The second I turn WiFi back on it kills the Audio and the phone goes back to normal mode. It does it right in front of my eyes. So something is causing it to switch back overriding it but it is not iTunes. Also one other thing I noticed if I try to force it by hitting the airplay button every time it try's to switch back the podcast info will flash on the ATV for a second like it is trying then it kills it and goes back to the phone.
3. ATV running a show and I open my Macbook, cuts off goes back to main screen even when itunes is off. If I close the lid and try it right away it will still go back to menu. If I try to select a program it will not play at all. Just flashes and goes back to main screen. I have to wait a few moments or try watching a different show then go back tot he one that was cut off for it to then work correctly.
NOW to add insult to injury I confirmed all of this then went along my menu bar at the bottom confirming everything was off and testing ATV every few until it started working. It started working after I turned off Skype, Word, Excel, and VLC. The show ran with the top open or shut or opening it while running. also connected and disconnected WiFi show ran fine. So I started turning everything back on one at a time opened and shut lid until ATV cut back to menu and nothing. Show has been running for last 5 minuets with out a hitch. I logged back in to iTunes on Apple TV tried again still works fine. Who knows when it will act up again.
This happens on Hulu Plus and HBO Go and Airplay on my phone. I really want to see this issue corrected there is no excuse for it this long after the release.

My Apple TV drops out when my iMac isn't connected to wifi yet my TV is connected to wifi. Also having issues with losing settings on Home Sharing as well. How do I fix these issues?

Whether I'm watching a movie purchased via my Apple TV or a movie stored on my iTunes app on my iMac I'm having constant issues with Apple TV either cutting out (randomly - not related to wifi) or not being able to access the 'My Computer' files when my iMac drops out the wifi connection because its in power saving mode. I also have issues with 'Home Sharing' settings having to be reset and sometimes having to unplug the Apple TV power cord and plugging it back in to be able to successfully reset these settings so I can get back to watching whatever it was I was viewing on Apple TV. My TV is connected to wifi as well so I'm wondering if there are any changes I can make in the settings of both my Apple TV and iMac or TV so that I can just select whatever it is I want to watch and be able to watch the entire movie or episode without it dropping out or having to keep flicking the mouse on the iMac to keep the computer connected to wifi? I love Apple products generally but Apple TV is proving to be a pain in the a**e lately. Hopefully someone can help me sort these issues out

Intermittent issues will point to a local network/wifi issue.
Reboot ATV and router, make sure both are up to date
Try ethernet
The home sharing connection will cut out if the iMac goes to sleep.

How many times should the computer cycle on-off when doing a factory reset?

I have a Toshiba A665-S6065 which can not boot. Yesterday I tried the Auto Recovery by holding the 0
while booting, and following the default instructions. It seemed to complete without errors. But the computer
will still not boot. Today, when reading the instructions, it said to expect the computer to cycle on and off severa
times. So how many times? will there be any propmts or messages? How long should the entire process take?
How long should the computer be off before it turns on again each time? I think I might be screwing things up
by intervening and trying to start the computer myself because it isn't clear to me what should actually be happening.
Could someone please tell me what to expect before I start looking at possible hardwre problems?
BTW, I can access the Setup and Boot Menu.
Thanks,
kjdroid
NEW info:
Now when I boot while holding the 0 key, instead of going directly to the Recovery Wizard, it goes to the
Windows Boot Manager.
from there the options are Windows Setup [EMS enabled]
and Windows Memory Diagnostic, as well as the F8 option for advanced options.
If I select Windows Memory Diagnostic I get
File: \boot\memtest.exe
Status : 0xC000000f
Info : The selected entry could not be loaded because the application is missing or corrupt.
If I select Windows Setup or F8 followed by normal windows startup or startup in safe mode then
I get the following sequence of events.
Starting Windows with the Windows logo.
then the blue screen
Then to the Toshiba Recovery Wizard, where it partitions, and does the CRC and then prompts to press
finish to restart the computer.
Either the computer does not shut down, or it stops and starts very quickly because all the lights cycle
on and off but it does not appear that the start/stop light actually ever turns off.
Then I get the Starting Windows with Logo again.
Then the Recovery Wizard comes back but only with the screen about partitioning. It does not
do the recovery and CRC this time.
Nextis the Toshiba Logo reappears again with the options for F2 or F12 for the Setup and Boot Menus.
Finally, I get a blue screen and it appears nothing else is happening. I let it sit for 30 minutes before I retry, because I am not sure what is supposed to be happening now.
Also, one of my attempts, I got as far as the messages:
Setting up the Registry
Starting Services
Applying System Settings
Will continue after restarting your computer
Is preparing your computer for first use.
But then again, it just goes into the blue screen state until I finally decide to shut things down.
Am I being premature or should I let the blue screen sit there for a few hours while work is being
done in the background? I don't hear any sounds from the computer that would indicate any type of activity.
Thanks again
kjdroid

Actually, it's kind of hard to tell you what to replace. If you have a spare hard drive laying around, go for it. It also could be memory issues (I have the same model as you) & it was my sister-in-law's notebook before I get it. The notebook had several memory dumps that CCleaner found & deleted when I was working on it.
I told her that I would re-install it for her to make sure there no viruses or such. After backing up the computer, I proceeded to what was supposed to work, pressing "0" at startup to no avail, then booted into the area where the system restore, command line repairs & such were, & there was the option for a factory reset, the last option. I chose that one, & like you stated, it rebooted numerous times, until finally it was through. Longest factory re-install I've ever done.
What led me to believe there were memory issues was during the first round of updates, it BSOD'd, another memory dump was found by my portable CCleaner. It still had the original Samsung PC3-8500 memory, so I took the memory that shipped with my MSI (PC3-10600) & installed that, then not only was all fine, it was noticably faster. Once I got it fully updated & scanned with MBAM & the ESET Online Scanner (I always do this when installing or re-installing a computer), I removed my memory & placed hers back in, then returned it to her.
I ended up with it about 10 days later, she said it was still dumping. Needing a spare notebook, I offered $100 for it, ending up paying $150, but still came out way better than on eBay.
Once I got it, I placed the 6GB RAM back in there that I had, & also replaced the HDD with a extra Crucial M4 that was laying around. Right before swapping drives, I ran HD Tune (free) on the original, there were yellow attributes, meaning that it had issues pending. It's a 500GB Seagate HDD that runs at 7200 RPM. Just so happened, I lost a 500GB Seagate Barracuda desktop HDD (7200.11) less than a month ago. Booted the computer, the screen stated "No Operating System found".
So it could be either the HDD or memory (RAM). Or worse yet, the MB itself. Has it been dropped? Notebooks are fairly durable, but they don't take to being dropped very well. Does it run hot? If so, there may be severe dust buildup that's causing it to overheat, that will make it BSOD. My guess is that's it's one of the first three that I mentioned above & if it's the MB, forget it. Prices are too high, even for used ones & in a notebook, it's basically a total teardown to replace it. If it's a new MB, it may cost between $200 to $400, depending on popularity of the model. That's too much to pay to repair a computer built in 2010.
I'm trying to give some suggestions here, based totally on personal experience on my & other's computers that I work on. However, online it's a cat & mouse game. I don't want to tell you to purchase another HDD unless it's almost 100% certain that's the issue. Which is why I asked if you have a spare earlier. Also, try reversing the position of your memory sticks (a 5 minute job), it's behind that lid close to the battery underneath the notebook.
Post back if you need further assistance. Someone else may have other ideas, so follow the thread.
Best of Luck,
Cat

Apple Raid dropping off when doing most data renders

Similar Messages

Maybe you are looking for