Apple VPP and Configurator

I currently am managing 30 iPads at my school. I have paid for 30 copies of an app. When I open up configurator, if I want to install this app on all 30 iPads, where do I download the app from. At this point, I have put in one of my 30 redemtion codes into iTunes on my computer, downloaded the app to iTunes, taken the file from iTunes and put it in Apple Configurator. The problem is, now I can only install the app on 29 devices (as it is assuming that I have already used one of the codes). I need to know how to download a paid app, without having to use one of my redemtion codes to simply get it to my computer so that I can use it in configurator. Obviously, this is not how apple intends me to use one of my redemtion codes; however, I see no other way.

Hi bonfire99,
Re-download the VPP spreadsheet from Apple. Re-import the codes into Apple Configurator. Try syncing again. The reason to do this is that Apple Configurator doesn't actually "use" the codes. It is just keeping a record of the codes. You do use one code in iTunes on the computer to download the initial .ipa file. But when you re-import the new VPP code spreadsheet into Apple Configurator it should show that you have all codes available as long as you are using the same Apple ID in iTunes that you are in Apple Configurator. (the key word here being "should")
If this doesn't work, contact VPP for Education support. Explain your situation and ask them to restore your VPP code(s). They will. Here's the online form: https://ssl.apple.com/support/itunes/vpp-edu/
You can also try calling VPP for Education Support at 1-800-800-2775.
Hope this helps. Good luck!!
~Joe

Similar Messages

VPP and Configurator drama

I have 20 VPP codes for iMovie, and I attempted to use those codes to put iMove on my classroom iPads.
After going through the steps, the code document notes 20 codes are redeeemed. Yet, not a single machine ever had iMovie on it. Also, Configurator is accepting what the document says and it saying there are no codes available either.
My guess is I need to unredeeem these codes somehow and start from scratch. But I am stumped on how to do it since there was no real redemption.
Any help would be appreciated!!!
Thanks,
JMSLab

Hi bonfire99,
Re-download the VPP spreadsheet from Apple. Re-import the codes into Apple Configurator. Try syncing again. The reason to do this is that Apple Configurator doesn't actually "use" the codes. It is just keeping a record of the codes. You do use one code in iTunes on the computer to download the initial .ipa file. But when you re-import the new VPP code spreadsheet into Apple Configurator it should show that you have all codes available as long as you are using the same Apple ID in iTunes that you are in Apple Configurator. (the key word here being "should")
If this doesn't work, contact VPP for Education support. Explain your situation and ask them to restore your VPP code(s). They will. Here's the online form: https://ssl.apple.com/support/itunes/vpp-edu/
You can also try calling VPP for Education Support at 1-800-800-2775.
Hope this helps. Good luck!!
~Joe

VPP and Apple Configurator

We started our iPad deployment with just a few iPads. We bought some VPP and use them to install apps on a few devices. Now we have added to the group of iPads to make it a cart of 20. We are going to start using configurator to setup and manage them. Is it possible to take the codes we have used on the first iPads and move them over to Apple Configurator so we can deploy the apps that way?

My understanding is you need to have deployed in supervisor mode on the ipad to get the code back. You may want to talk to your apple salesperson to discuss alternative ways of getting the codes back.
These pages will not answer your question.
Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0

I purchased 20 copies of the King of Math App in VPP and downloaded the codes but it doesn't show up in Apple Configurator. What do I do now?

I purchased 20 copies of the King of Math App in VPP and downloaded the codes but it doesn't show up in Apple Configurator. What do I do now?App not showing

If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
You will have to have all computers authorised with the relevant Apple ID's
Store > Authorise this computer...
This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
If both Computers use the same apple id this step is not required.

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

Assambling and configuring an Apple Workgroup Cluster for Bioinformatics

I'm assambling and configuring an Apple Workgroup Cluster for Bioinformatics following the steps in Apple's seminar: http://seminars.apple.com/seminarsonline/wgcforbio/apple/index1.html
I have a xserver with 10.4 (the head) with a fixed IP and 2 more xservers with 10.5 (the nodes). All the servers connected with a switch.
I had trouble with the networking at the beginning but I can ping between the servers at last.
When I try to config the Open Directory I can't apply my configuration, the buton is disabled.
Have I to config a DHCP Server for the servers without fixed IP?
Is mandatory to config The Lights Out management and have it running?
Any Idea?
Thank you.

What are they charging you (and why, if you have to go asking for help for them to be able to do their job), and what are you charging them ?

10.8.2 Mac Pro 2009 4 Apple Monitors = doesn't keep the display order and configuration. Please Help me!!

Guys i have a Mac Pro 2009 with 4 monitors attached.
Since i upgrade to 10.8, then to 10.8.1 and now to 10.8.2 my Mac Pro every time it starts, cannot remember the order and appearance of my displays so ihave to reorder them every single time.
Can somebody tell me what to do???
Please help me either wise i ma going to burn it!

I have brand new 10.8.2 Mac Tower with two matching video cards ordered from Apple directly and have the same problem. It wont save the display settings and also cant seem to tell which video card is which either.
In addition, the screen display images if loaded from a personal folder, is also not remembered after startup.
Please advise us what to do, Apple!!!! This is urgent for me. I am proifessional user and this machine is for use on live projection shows. We put a ton of money into this machine and it can't even remeber the displays! Not very amusing.

Apple Mail and IOS mail client's auto configuration

Good morning,
Does any kind of documentation exist, anywhere, of how Apple Mail and IOS does autodiscover (how they handle it) and which XML format does it require for non Exchange accounts to be autoconfigured (an IMAP account with SSL and SMTP SSL too?.
Best regards,

Good morning Eric,
Thank you so much for your answer. Básically the answer I'm trying to get is how to manage for autoconfigure Apple Mail and iOS Mail automatically with a not "so known" email provider such us Hotmail, Yahoo, Gmail, like can be Sarenet (www.sarenet.es). I mean which kind of info should an XML or DNS SRV record contain in order to achieve this goal?. My answer requirement is far more specific that yours. Anyway thanks a lot as said before .
Regards,

Testing Elements 11 on my Apple Air and get lock ups

I am testing out Elements 11 on my Apple Air and it works well for quick video edits. I just attempted to use the Instant Movie feature and it locks up at 100% and never finishes. I have to Force kill the application. Is this an issue with my laptops capability here is my configuration:
Intel Core i5
1.3 GHz
Memory 4 GB

lighted
Thanks for the reply. If the Instant Movie is 30 seconds in duration, I would be less likely to have considered system resources. I was thinking that you had at least a several minutes Instant Movie. But, that factor should be ruled in or out.
But, there is the possibility of a source format conflict. Also, when you create the Instant Movie, do you click Yes to the Instant Movie request for permission to remove existing effects added to the clip before it creates the final Instant Movie? Or, do you end up with the effects applied to the clip before Instant Movie plus the effects the Instant Movie has applied?
If you had not already, for troubleshooting purposes, you might want to look at some jpeg photos as source to determine if they behave in Instant Movie as do your present source media for the feature.
We will be watching for further developments as your schedule permits.
Best wishes
ATR

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

Can I Cancel my Current Apple ID and Create a New One for my iPod Touch?

Hello. I'm new to Apple products. I just bought a 5th Generation iPod Touch and am quite happy with it so far.
I created an Apple ID for it, but used an all-purpose e-mail address with it. I have my own domain, and would like to create a new e-mail account specifically for the Apple ID. (I didn't think about this at the time I created the Apple ID. It was an afterthought.)
So, I was wondering if I could either cancel my current Apple ID and start from scratch with a new e-mail address, or can I just configure the Apple ID and change the e-mail address?
Is this possible? If so, which is the most practical way of doing this? Thank you very much. Jd

Oops, I realized I posted this question in the iPhone section by mistake. Is it possible to delete this message and re-post it over in the iPod Touch section?
My apologies for this mistake. Jd

Apple Mail and GoogleMail via IMAP

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
_*Apple Mail and GoogleMail via IMAP*_
As posts concerning the setup of Apple Mail for GoogleMail IMAP access become more frequent on Apple Discussions, I decided to collect some of the most asked-for info in one place. The following hints are intended to provide enough info for anyone who wants to get started with Google Mail IMAP and Mail.app.
As you might have noticed already, GoogleMail behaves differently from other IMAP accounts in some respects. One of the underlying reasons is its use of labels instead of folders (i.e. instead of moving messages to different folders – like e.g. Private and Work – in order to establish some order, rather there are labels tagged to the messages). Because of this a particular setup of Apple’s Mail client is required.
*Activating IMAP for Google Mail*
If you haven’t activated access via IMAP for Google Mail already, follow the instructions given by Google [here|http://mail.google.com/support/bin/answer.py?answer=77695&topic=13294]. It boils down to this:
1) Sign in to Gmail.
2) Click "Settings" at the top of any Gmail page,
3) click "Forwarding and POP/IMAP",
4) select "Enable IMAP".
5) Click "Save Changes".
*Creating a new account in Apple Mail*
To add a Google Mail IMAP account in Mail.app, go to File > Add Account. A wizard will open which prompts you to insert your Name, the eMail-address of the new account and the password. Don’t use the option for automatic configuration if it’s available. Info on what to type into the different fields can be obtained from Google [here|http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814]. The most important are:
1) Incoming Server: imap.gmail.com, port 993 (using SSL)
2) Outgoing Server: smtp.gmail.com, port 465 or 587 (using SSL)
3) Your account name is your full email address including "@gmail.com" (without the quotation marks)
*Configuring the Google Mail account in Apple Mail*
After you have added your Google Mail IMAP account to Mail.app, you’ll find a section for Google Mail in Mail.app’s sidebar with subfolders like "All Mail" (which has in turn several subfolders) and folders for each label you created with GoogleMail. Now you have to configure the account properly. Despite what [Google recommends|http://mail.google.com/support/bin/answer.py?answer=78892&topic=1281 4], I found the following settings to work best for me.
In the sidebar, navigate to the subfolders Trash/Sent/Drafts/Junk of "Google Mail" (the one with the white folder icon instead of a blue one) in turn and go to "Mailbox" menu > "Use this mailbox for..." > Trash/Sent/Drafts/Junk respectively. Afterwards these folders show up as subfolders to the main Trash/Sent/Drafts/Junk folders in the sidebar (and at the same time disappear from the GMail section). Among others this step is necessary because of Google Mail’s implementation of labels. E.g., as Google states [here|http://mail.google.com/support/bin/answer.py?answer=78892&topic=12814]:
Messages that are deleted from an IMAP folder (...) only have that label removed and still exist in All Mail
So if you want to delete a message you have to set the option to "Use this mailbox for… Trash" as described above. Same applies to sent messages etc.
Furthermore, make sure every checkbox in Mail's Preferences > Accounts > GoogleMail > Behavior is checked . (Some will already and automatically be checked when you apply the option "Use this mailbox for..." as described above).
*Some basic troubleshooting tips*
1) If your counter for unread messages in Mail.app doesn’t refresh properly, go to "Mailbox" menu > "Sync all accounts".
2) If you have set up a Smart Mailbox in Mail e.g. for unread messages and every unread message of Google Mail shows up twice, then add the criterion "Message is not in mailbox" > "All Mail", and set the requirement for messages to comply with ALL conditions (instead of ANY). This is necessary because of every message there is a copy stored in All Mail.
I hope these info will be regarded as helpful by anyone who tries to get started with Google Mail and experiences some problems on the way.
The links given were accessible as of September, 3rd, 2008. The setup was tested on a MacBook with OS X 10.5.4 Leopard and Mail 3.4 (928/928.1).
Good computing.
floba
(Note: the above given hints are personal suggestions and I don’t assume liability for any disorders that might occur after applying the described steps.)
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
_*Apple Mail and GoogleMail via IMAP*_
As posts concerning the setup of Apple Mail for GoogleMail IMAP access become more frequent on Apple Discussions, I decided to collect some of the most asked-for info in one place. The following hints are intended to provide enough info for anyone who wants to get started with Google Mail IMAP and Mail.app.
As you might have noticed already, GoogleMail behaves differently from other IMAP accounts in some respects. One of the underlying reasons is its use of labels instead of folders (i.e. instead of moving messages to different folders – like e.g. Private and Work – in order to establish some order, rather there are labels tagged to the messages). Because of this a particular setup of Apple’s Mail client is required.
*Activating IMAP for Google Mail*
If you haven’t activated access via IMAP for Google Mail already, follow the instructions given by Google [here|http://mail.google.com/support/bin/answer.py?answer=77695&topic=13294]. It boils down to this:
1) Sign in to Gmail.
2) Click "Settings" at the top of any Gmail page,
3) click "Forwarding and POP/IMAP",
4) select "Enable IMAP".
5) Click "Save Changes".
*Creating a new account in Apple Mail*
To add a Google Mail IMAP account in Mail.app, go to File > Add Account. A wizard will open which prompts you to insert your Name, the eMail-address of the new account and the password. Don’t use the option for automatic configuration if it’s available. Info on what to type into the different fields can be obtained from Google [here|http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814]. The most important are:
1) Incoming Server: imap.gmail.com, port 993 (using SSL)
2) Outgoing Server: smtp.gmail.com, port 465 or 587 (using SSL)
3) Your account name is your full email address including "@gmail.com" (without the quotation marks)
*Configuring the Google Mail account in Apple Mail*
After you have added your Google Mail IMAP account to Mail.app, you’ll find a section for Google Mail in Mail.app’s sidebar with subfolders like "All Mail" (which has in turn several subfolders) and folders for each label you created with GoogleMail. Now you have to configure the account properly. Despite what [Google recommends|http://mail.google.com/support/bin/answer.py?answer=78892&topic=1281 4], I found the following settings to work best for me.
In the sidebar, navigate to the subfolders Trash/Sent/Drafts/Junk of "Google Mail" (the one with the white folder icon instead of a blue one) in turn and go to "Mailbox" menu > "Use this mailbox for..." > Trash/Sent/Drafts/Junk respectively. Afterwards these folders show up as subfolders to the main Trash/Sent/Drafts/Junk folders in the sidebar (and at the same time disappear from the GMail section). Among others this step is necessary because of Google Mail’s implementation of labels. E.g., as Google states [here|http://mail.google.com/support/bin/answer.py?answer=78892&topic=12814]:
Messages that are deleted from an IMAP folder (...) only have that label removed and still exist in All Mail
So if you want to delete a message you have to set the option to "Use this mailbox for… Trash" as described above. Same applies to sent messages etc.
Furthermore, make sure every checkbox in Mail's Preferences > Accounts > GoogleMail > Behavior is checked . (Some will already and automatically be checked when you apply the option "Use this mailbox for..." as described above).
*Some basic troubleshooting tips*
1) If your counter for unread messages in Mail.app doesn’t refresh properly, go to "Mailbox" menu > "Sync all accounts".
2) If you have set up a Smart Mailbox in Mail e.g. for unread messages and every unread message of Google Mail shows up twice, then add the criterion "Message is not in mailbox" > "All Mail", and set the requirement for messages to comply with ALL conditions (instead of ANY). This is necessary because of every message there is a copy stored in All Mail.
I hope these info will be regarded as helpful by anyone who tries to get started with Google Mail and experiences some problems on the way.
The links given were accessible as of September, 3rd, 2008. The setup was tested on a MacBook with OS X 10.5.4 Leopard and Mail 3.4 (928/928.1).
Good computing.
floba
(Note: the above given hints are personal suggestions and I don’t assume liability for any disorders that might occur after applying the described steps.)
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Apple Mail and Gmail IMAP

With the iPhone coming to Verizon soon, I'd like to move back to Apple Mail from Gmail, but still want to keep Gmail as my source because my domain is setup with Google Apps but mostly because of the unparalleled spam filtering Gmail has. My problem is that even though I've configured Apple Mail exactly as Google recommends (shown below), I still have some issues.
From the Mail menu, click Preferences > *Accounts > Mailbox Behaviors*
Drafts:
Store draft messages on the server > *do NOT check*
Sent:
Store sent messages on the server > *do NOT check*
Junk:
Store junk messages on the server > checked
Delete junk messages when > Never
Trash:
Move deleted messages to the Trash mailbox > *do NOT check*
Store deleted messages on the server > *do NOT check*
I want to have true IMAP functionality here, but I'm not getting it. Sent messages work fine...if I send a message, it shows up in Apple Mail in the Sent folder and when I go to Gmail it is also in the Sent folder. BUT...when I delete a message in Apple Mail it goes to the Gmail *All Mail* folder (in Apple Mail and Gmail) and never shows up in the Gmail Trash on either Apple Mail or Gmail...where it should. I've tried changing the settings under *Apple Mail > Trash* but that doesn't fix the problem.
I realize some of you might be inclined to say "It's Google problem...ask there" but I'm hoping a Gmail user here might have had this same issue before. Even as a dedicated Apple person for many years, I still can't give up Gmail and their spam filtering that Apple Mail can't come close to. Thanks for any suggestions.

Thanks, Andy. I should have posted a closure statement on this thread as I finally figured everything out. The most frustrating thing is Google's own advice at http://mail.google.com/support/bin/answer.py?answer=78892# couldn't further from correct. After many hours of experimenting with settings, I finally came up with the correct ones. In fact, I'm in the process of writing an article about it since there is simply no definitive guidance on the web that I've been able to find in the time I've searched.
Your comments are on target...everything on the *Behaviors Tab* needs to be checked (excepts Notes) and the *Delete when* settings must be set to Never. But there are a few other things that must be done, including some changes on Gmail Settings before Mail and Gmail will be perfectly synchronous. I'll post the entire solution on this forum when I finish the graphics.

HT201251 I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
Here is a pic

What is BDI or BDS spelled out? Jabber for Mac 9.2(1) Installation and Configuration Guide

I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…

Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers.

Apple VPP and Configurator

Similar Messages

Maybe you are looking for