AppleScript for setting Permissions Automatically -help needed

Hello -
I am trying to create an applescript that can run automatically each time a user signs into a Mac set up for multiple (non admin) users that will take a folder on the drive and set permissions for all sub folders and files to read/write for everybody. I want the script to essentially do the equivalent of checking to "apply to enclosing items" checkbox.
I know very little about applescript and have not found a good tutorial online yet. Does anybody already have a script that will do this or know how to create one and set it up so that it will run automatically each time a user signs in? I think that I can probably add whatever script is created to the login items for the user to do that. But, don't I also have the problem of the script needed admin rights to reset permissions?
Any help would be appreciated.

What exactly are you wanting to do? There are shared folders that already exist (public and private), and Access Control List entries can be set to allow for custom access. Is this for a temporary directory or something like that that gets created when a user logs in?

Similar Messages

Recall for my problem urgent help needed

Hi friends,
I am a new DB administrator and I have faced a problem in our database.
Here i will explain our architecture and i will state the problem.
In my org. we have database server responsible for keeping the DB itself. Another server which is the main server is responible to control the access to the network and making and storing DB backups using a third party software (Net Backup Software). The backups are kept in tapes accessed by main server using tapes robot.
Our backup policies is that the software makes full backup every week and a incremental dialy backups of the DB. The retention of each backup is two weeks. All servers have been shutted down during vacations.
The problem is that when we came from two weeks vacation, users found that the DB is in old state and we lost the most recent valid state. I tried all my best since month ago to do recovery. I decided the point of time to restore and I also use the SCNs but I could'nt reach a solution. I used Net backup, Rman, EM but without a result.
When i check NetBackup console I find a backup available since 28 of July 2010. Actually the changes are made after this date and now the DB state is older thatn this date. the question is: WHER HAVE THE CONSEQUENT CHANGES GONE? around one mounth of work has been lost..
the oracle shows me the following message:
The RMAN script for the recovey is:
Run {
allocate channel t1 type 'sbt_tape';
set until time to_date('28-Jul-2010 00:00:00', 'DD-MON-YYYY HH24:MI:SS');;
restore database;
recover database;
release channel t1;
RMAN-00571: ========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ============
RMAN-00571: ========================================================
RMAN-03002: failure of restore command at 21/09/2010 11:01:26
RMAN-06100: no channel to restore a backup or copy of datafile 20
RMAN-06100: no channel to restore a backup or copy of datafile 19
RMAN-06100: no channel to restore a backup or copy of datafile 18
RMAN-06100: no channel to restore a backup or copy of datafile 17
RMAN-06100: no channel to restore a backup or copy of datafile 16
RMAN-06100: no channel to restore a backup or copy of datafile 15
RMAN-06100: no channel to restore a backup or copy of datafile 14
RMAN-06100: no channel to restore a backup or copy of datafile 13
RMAN-06100: no channel to restore a backup or copy of datafile 12
RMAN-06100: no channel to restore a backup or copy of datafile 11
RMAN-06100: no channel to restore a backup or copy of datafile 10
RMAN-06100: no channel to restore a backup or copy of datafile 8
RMAN-06100: no channel to restore a backup or copy of datafile 6
RMAN-06100: no channel to restore a backup or copy of datafile 5
RMAN-06100: no channel to restore a backup or copy of datafile 4
RMAN-06100: no channel to restore a backup or copy of datafile 3
RMAN-06100: no channel to restore a backup or copy of datafile 2
RMAN-06100: no channel to restore a backup or copy of datafile 1
the backup script is as follows:
DB server = jewcsrv3.
Main server = jewcsrv1.
RUN {
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo %BACKUP_TYPE%
echo FORMAT 'bk_u%%u_s%%s_p%%p_t%%t'
echo DATABASE;
echo RELEASE CHANNEL ch00;
echo # Backup Archived Logs
echo # For an offline backup, remove the following sql statement
echo sql 'alter system archive log current';
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo FORMAT 'arch-s%%s-p%%p-t%%t'
echo ARCHIVELOG
echo ALL
echo DELETE INPUT;
echo RELEASE CHANNEL ch00;
echo # Control file backup
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo FORMAT 'bk_u%%u_s%%s_p%%p_t%%t'
echo CURRENT CONTROLFILE;
echo RELEASE CHANNEL ch00;
echo }
Could any one please help me to solve this problem. If there is no solution what could he suggest to do now to have a valid state and for future to avoid this problem.
Thanks alot..
PLEASE REPLY AS SOON AS POSSIBLE
Edited by: 799539 on Oct 4, 2010 12:35 AM

Your BACKUP script does set the NetBackup parameters for the Tape Channels.
However, your RESTORE script does not specify the NetBackup parameters -- so Oracle doesn't know which channel to use for the Restore.
You need to add the NetBackup parameters in the RESTORE.
However, this is suprising :
The problem is that when we came from two weeks vacation, users found that the DB is in old state and we lost the most recent valid stateA database will NOT EVER "go back to an old state" until and unless someone has restored an old backup. If the servers were shutdown for two weeks, who would have restored the database. If the servers were shutdown, how would Oracle have automatically gone back to an old stats ? There must have been some manual actions.
Hemant K Chitale

ONKYO TX-SR805 Set-up Menu HELP Needed

This is a LONG post, but I would appreciate if you would read it and respond to it. The settings That are setup might not be the CORRECT settings. If you think a different setting should be made, please let me know.
Also right now I only have 2 front speakers (NHT VT-1A), 1 middle( NHT VT-1C), and a NHT SW12 Subwoofer. I will be hooking up 2 or 4 more speakers for the REAR.
Here are the settings on my TX-SR805 receiver on the set-up menu. I could use some help to see if they need set to something else.
2.2 Speaker Config
      Subwoofer       yes
      Front            70Hz
      Center          90Hz
LPF of LFE        80Hz THX
2.6 THX Audio Setup
       THX subwoofer YES   I don't know if mine is or not
       BGC                    OFF Not sure what this BGC means
3. AUDIO ADJUST
3.1 Tone Control
       Front    Bass      -1dB
                    Treble   +1dB
      Center Base      +2dB
                    Treble   +7db
     Subwoofer Base +7
3.2 DIRECT
      Delay Enable
      DSD                NO   Not sure what DSD is
3.3 MULTIPLEX/MONO
      Multiplex
      Input CH       Main/Sub
      Mono
      Input CH         L+R
      Output Speaker L/R
3.4 PLIIx/Neo:6
        PLIIx Music   (2ch input)
        Panorama        ON
        Dimension       +1
        Center Width    3
Neo: 6 Music
        Center Image   5
3.5 DOLBY EX
        Dolby EX        AUTO
3.6 THEATER-DIMENSIONAL
        Listening Angle   Narrow
3.7 LFE LEVEL
        Dolby Digital      -10dB
        DTS                     -10dB
        Multich PCM      -10dB
        Dolby True HD   -10dB
        DTS-HD Master Audio -10dB
        DSD                     -10dB
4. SOURCE SETUP
       CABLE/SAT
4.1 INTELLIVOLUME     +4Db
   .2 A/V SYNC            0 msec
   .3 NAME EDIT         Blank
5.   LISTENING MODE PRESET
5.1 DVD
       Analog/PCM      NOT SURE WHAT TO SET HERE
       Dolby Digital      NOT SURE WHAT TO PUT HERE
       NOT SURE WHAT TO PUT FOR ANY OF THESE LISTENING MODE PRESET
5.8 TUNER (ANALOG)      Neural THX 5.1 is set on mine. Is this correct?
         CD                           ?
6. MISCELLANEOUS
6. 1 VOLUME SETUP
          Volume Display              Relative
           Muting Level               -40dB
           Maximum Volume       +10dB
           Power on Volume        -22dB
           Headphone Level        +2dB
6.2 OSD SETUP
           Immediate Display       OFF
           Monitor Type              16:9
           Display Position           TOP
7. HARDWARE SETUP
7.4   ANALOG MULTICH
           Subwoofer Input Sensitivity    0
7.5   HDMI
        ALL under here are     ENABLE
Solved!
Go to Solution.

I gave you some answers in your original post. I wish you didn't start a new one. Here is what I posted.
Re: ONKYO TX-SR805 Set-up HELP Needed[ New ]
Options
Mark as New
Bookmark
Subscribe
Subscribe to RSS Feed
Highlight
Print
Email to a Friend
Report Inappropriate Content
01-21-2010 08:24 AM
Unfortunately this is very difficult because the top half of your post, your really the only one that can answer what the setup should be. The adjustments are made based on the acoustics of your room and how everything sounds noone can really give you info on it because every house, and room has different acoustics. The walls, insulation, carpet or bare floors, basement or main floor are just some examples of what can make a difference in sound reproduction.   By the way NHT (Now Hear This) are excellent speakers. For bass and treble, the music I listen too requires a high treble content so I usually have it at 7 out of 10 but my bass is at 4 out of 10.   The sub base should be fine where it is.
Did your receiver come with an Audessy mic for calibration. I would use that for a basic setup and go from there I am not sure if on your unit it will do frequecy but I think it did.
Your volume settings look fine again personal preference there is right or wrong.
For you listening mode Preset you should have an auto setting I am at work so it may take a coule of hours for me to get back to you as I have to go through your manual and see what you would set it up with so please bare with me. I will list the info as I read it so it may not be in the order you have it.
I will have to make a second post since I can't go back and edit this one.

For Each Loop: Enumerator Configuration In the For each loop Editor Help needed

Hi All,
I have a package that runs and updates a table with everytime someone adds a flat file in the source folder. One of the requirement is to upload files with the following
ACA Flat files will have a naming convention of “ACA_ccyy_<julian date>” : How can I add this?
Under Files this is how I have setup the qualifies "ACA_*.*"
Is there anyway to pass the entire naming convention in the file section? If so how can I ?
Please help?
FM

As you have ACA_*.* set in Files Filter, it will return all the files from the folder which start with ACA_.
You can have one dummy Sequence Container inside FE Loop Container. Connect it to your starting task and do right click on Precedence Constraint and write the expression the way you want by using SSIS functions. If the expression is evaluated to True only
then it will go to the next task.
In this way you can skip Non-ACA files.
Please refer:
SSIS Skip Certain Files in a For Each Loop
- Vaibhav

DMZ configuration WRT610N for 2 IP addresses Help needed

How can I set up DMZ for 2 IP addresses in WRT610N. Please help. Thanks

How would I solve this problem then. I have to servers on the network. One is Linux and other one is Windows. I'm buying block of 5 IP addresses from provider. One is assingned to .250 internal address and other one is .240. I would like to assign public addresses to them. At my work we have Neutopia box and have about 4 servers behind it with internal IP addresses. In netopia box have a table populated with addresses internal and external. Please, help. Thanks

Best Export / Video settings for Premiere Pro. Help Needed.

What's the best settings when you want to export a video from Premiere Pro for the web or otherwise. Best settings = good quality video and LOW file size.
Benchmark : The videos on Apple Trailers. Check them out at http://www.apple.com/trailers
The trailers are of high quality video, great sounds, and the Large sizes all fall under the 25MB mark. Any ideas on HOW this is done and what
settings in Premiere Pro CS3 might be able to replicate such standards?
Any help is appreciated. I normally use Encoder and export using H264 but that always seems to have an Audio lag. Any similar issues?
Thanks a mil!

I understand that better quality = bigger file size. That's true in most cases, but there is a way around it, I'm just not sure what that way is. As I mentioned in the original post, the benchmark is http://www.apple.com/trailers . The non-HD videos on any movie page on that site hardly ever exceeds the 25MB mark. The videos are 2-3minutes long, and while they may not be top-notch BD visuals, they look way better than 95% of the stuff that's streamed off the net.
That's why I asked if anyone had any ideas on how to replicate something like that. Say I had a avi file of great quality, shot with a Panasonic DV Cam. I Capture the footage, do whatever I have to in Pr, and the result is now a 3minute video. I want it exported to a Quicktime file, I want it to look visually pleasing like the trailers on Apple, and I want it to fall under 25MB. I have tried H.264 encoding, regular Quicktime, and Quicktime via Encoder. Nothing reaches the expected quality.
For more examples visit http://www.passionpictures.com.my/pages/recent.aspx and download those simple 30second clips. All Quicktime, mostly under 5.5MB. If Pr can't do it, then I don't know what can...so I'm sure Pr can do it.
Problem is, how? Experimentation is definitely a way to go, I get that. But on the basis of the scenario given above...how is it done?

Script for export in datapump -- help needed !!!

hello all,
i am using the following script as batch file in my database for export
script:
=========
exp name/password file=d:\exp\%date%.dmp full=y log=d:\exp\exp.log an this will replace the first file(monday) on next monday.
similar way i need a script for data pump for full database export using datapump
thanks ,
gold

login to database as a dba and create directory for your dumpfile path.
create directory dpump_dir as 'd:\exp';
and then use the below script for export.
expdp username/password full=y directory=dpump_dir dumpfile=%date%.dmp logfile=exp.log

SQL Exception: Result Set Closed. Help Needed Pls...

Hi
I am trying to insert the name field into �TestNoName� table which is randomly retrieved from �UniqueName� table. I am getting SQL exception: result set closed. Please look at the given code and let me know what�s wrong with my code:
Also please guide me about entering unique (serial numbers) dynamically into
database using Java. I have to enter customer details into database at some time and some customers details after some time but the customers should be given serial numbers.
Thank you in advance!
Ravi
Here is the Code:
String query1 = "Select Name from Unique_Names";
String query2 = "SELECT Number, Name FROM TestNoName";
Statement stmt;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,"","");
System.out.println("Successfully Connected to Database");
stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
ResultSet rs = stmt.executeQuery(query1);
ResultSet rs2 = stmt.executeQuery(query2);
int count=0;
while (rs.next()) {
count++;
rs.beforeFirst();
for(int i = 0; i < 10; i++) {
int randomrow = random.nextInt(count)+ 1;
System.out.println(randomrow);
String Name2 = rs.getString("Name");
rs2.moveToInsertRow();
rs2.updateInt("Number",i);
rs2.updateString("Name",Name2);
rs2.insertRow();
System.out.println("Exececuted SQL Statement- Inserted One Record");
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
}

I am trying to insert the name field into
�TestNoName� table which is randomly retrieved from
�UniqueName� table. I am getting SQL exception:
result set closed. Please look at the given code and
let me know what�s wrong with my code: Post the actual exception, not some paraphrase of it. Oh, and let us know which line it actually refers to in the code.

Error: No batch input data for screen SAPMZVKDIALOGDEMO 1000 Help Needed

Hi Experts!
I wrote a program for BDC. I am attaching the code herewith. When i am trying to process the session in SM35, i was getting the error: No batch input data for screen SAPMZVKDIALOGDEMO 1000. Can anyone please tell me, what am i doing wrong.
Thanks.
REPORT zvkbdcdemo01.
DATA: bdc_tab LIKE bdcdata OCCURS 6 WITH HEADER LINE.
DATA: session LIKE apqi-groupid VALUE 'Session #1'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
    client                    = sy-mandt
*   DEST                      = FILLER8
    group                     = session
*   HOLDDATE                  = FILLER8
*   KEEP                      = FILLER1
    user                      = sy-uname
*   RECORD                    = FILLER1
*   PROG                      = SY-CPROG
* IMPORTING
*   QID                       =
* EXCEPTIONS
*   CLIENT_INVALID            = 1
*   DESTINATION_INVALID       = 2
*   GROUP_INVALID             = 3
*   GROUP_IS_LOCKED           = 4
*   HOLDDATE_INVALID          = 5
*   INTERNAL_ERROR            = 6
*   QUEUE_ERROR               = 7
*   RUNNING                   = 8
*   SYSTEM_LOCK_ERROR         = 9
*   USER_INVALID              = 10
*   OTHERS                    = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM fill_bdc_tab.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
    tcode                  = 'ZVKTR001'
*   POST_LOCAL             = NOVBLOCAL
*   PRINTING               = NOPRINT
*   SIMUBATCH              = ' '
*   CTUPARAMS              = ' '
TABLES
    dynprotab              = bdc_tab
* EXCEPTIONS
*   INTERNAL_ERROR         = 1
*   NOT_OPEN               = 2
*   QUEUE_ERROR            = 3
*   TCODE_INVALID          = 4
*   PRINTING_INVALID       = 5
*   POSTING_INVALID        = 6
*   OTHERS                 = 7
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
* EXCEPTIONS
*   NOT_OPEN          = 1
*   QUEUE_ERROR       = 2
*   OTHERS            = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form fill_bdc_tab
*       text
FORM fill_bdc_tab.
REFRESH bdc_tab.
PERFORM populate_bdc_tab USING:
'1' 'SAPMZVKDIALOGDEMO' '1000',
' ' 'SFLIGHT-CARRID' 'LH',
' ' 'SFLIGHT-CONNID' '0400',
' ' 'SFLIGHT-FLDATE' '07/07/2007',
' ' 'SFLIGHT-PRICE' '1982',
' ' 'SFLIGHT-CURRENCY' 'EUR',
' ' 'SFLIGHT-PLANETYPE' 'A310-300',
' ' 'BDC_OKCODE' 'CREA'.
ENDFORM.                    "fill_bdc_tab
*&      Form POPULATE_BDC_TAB
*       text
*      -->FLAG       text
*      -->VAR1       text
*      -->VAR2       text
FORM populate_bdc_tab USING flag var1 var2.
CLEAR bdc_tab.
IF flag = '1'.
    bdc_tab-program = var1.
    bdc_tab-dynpro = var2.
    bdc_tab-dynbegin = 'X'.
ELSE.
    bdc_tab-fnam = var1.
    bdc_tab-fval = var2.
ENDIF.
APPEND bdc_tab.
ENDFORM.                    "POPULATE_BDC_TAB

This normally means that you are trying to insert data on a screen for which a particular field is not available.
So check screen number, screen fields and report name. In case of screen fields, use F1, F9 (technical information), and check the name of the screen field for batch processing (all the way at th bottom of the pop-up). This can differ from actual name of the screen field.
If all this is ok, try to create a recording of the transaction with SM37.

Setting permissions - all files need to be 644/dirs 755 [SOLVED]

I have some files that are in a complex dir tree under:
/media/data
/media/data/project1
/media/data/project1/sub1
/media/data/project1/sub2
/media/data/project1/sub100
/media/data/project2
...etc. etc.
Basically, I need all the dirs to be 755 but all the files to be 644. Obviously I can `chmod -R 755 /media/data` but how can cause all the files to be 644 while retaining the dirs as 755?
Last edited by graysky (2010-02-14 21:34:43)

Allan wrote:chmod 755 $(find /media/data -type d)
chmod 644 $(find /media/data -type f)
find /media/data -type d -exec chmod 755 {} ;\
find /media/data -type f -exec chmod 644 {} ;\
Last edited by SemiBz (2010-02-14 21:13:20)

Coding for editing... help needed

Hello,
My mate has filmed my wedding on an HD TV camera and is asking me what coding to put the rushes onto so I can edit them on Imovie HD6.
Can anyone tell mw what I should be telling him? I've looked around the Mac site and it seems to suggest using Mpeg4, but I'm guessing that will be pretty low quality?
Any advice much appreciated!

Welcome to the discussions.
iMovie 6HD edits HD in "Apple Intermediate Codec" ("AIC") and the footage should be in 720p or 1080i.
Note that if you want to burn a DVD, that's Standard Definition. SD footage should be in DV, in your case DV-PAL.

Unable to set permissions for archiving

Using G5 iMac, OS 10.4.11 with iDVD 6. I have followed the instructions 1 thru 3 in help for setting permissions to archive a dvd project without any problem. However the last instruction is "Click Apply to enclosed items". I can not find anywhere to do this. Any help will be greatly appreciated. Regards from Ireland.

You are right. There is no place to "click apply to enclosed items". Just ignore that instruction, as it seems to be unnecessary. You already set your permissions by doing steps 1-3.

How to set up automatic cache purge

I am using the event polling table for setting up automatic cache purging.
I have created a table 'event polling table' in the database with the following fields:
CATALOGNAME
DATABASENAME
OTHER
SCHEMANAME
TABLENAME
UPDATETIME
UPDATETYPE
LOAD_ID
with TABLENAME, UPDATETIME, UPDATETYPE as non-nullable fields.
Then I have imported the table to the physical layer of the rpd, set up 'Oracle BI Event tables' in the Utilities as this table and set up a polling frequency of 15min.
I have created a report with 2 columns (DeptID, Saleamt) from 2 tables (Department, Sales) respectively. Both these tables were made 'cacheable' in the physical layer with cache never expires. Now the saved report is ran by logging in once again. So a cache entry is registered. My NQSCONFIG file enables cache.
I have added these 2 tables to the event polling table after the cache entry was registered. Technically after 15min, this cache should be purged automatically as the request created was from these 2 tables. But that does not happen. Even after half hr when I log in and run this report a cachehit occurs as cache still persists. My cache folder is the C:\OracleBIData\cache. I also check entries in the Repository (Manage ->cache).
Please let me know where am I making a mistake.
My goal is to get cache purged automatically every time there's an entry in the EPT. (To test when I create an entry in the EPT, I give the tablename and updatetype (=1), the updatetime is obtained automatically as sysdate.
Thanks
===================================================
For reference I have copied an earlier posting here:
===================================================
lets look at all your questions one by one
As the event polling table gets a row added for each table whose data is updated at the end of each ETL run, when exactly does the BI server purges cache related to that table - As soon as the polling happens and it finds a new record in your table
Lets say I set up a polling frequency (in Tools -> Utilities -> Oracle BI Event Tables) to every 60 minutes. At the end of every 60 minutes does the BI server restart by itself or does the polling take place without restart. - Polling takes place only when the server is up (there is no need to restart)
At the end of every 60 minutes does the BI server poll the event polling table whether or not any new rows are added to it? -(Yes )
What exactly happens when a new record is added to the event polling table in the database. - (The cache is purged )
If at the end of the ETL run data in 3 tables has changed, would 3 records be added to the event polling table in the database. - (yes , after the polling happens)
Let me know if you have more questions ...
Another way you can set it up is to create a batch file which would purge a table as its updated (use a procedure to capture the tables which have a value of 1 for update_type or use triggers to populate a table with these table names ) ...once purged you can set up your cache by using ibots (use javascripts) .
=============================================================================

I seem to have all the steps running except #3 - which is clearing the cache!
select T54927.UPDATE_TYPE as c1,
T54927.UPDATE_TIME as c2,
T54927.DB_NAME as c3,
T54927.CATALOG_NAME as c4,
T54927.SCHEMA_NAME as c5,
T54927.TABLE_NAME as c6
from
MPO_OWNER.MPO_EVENT_POLLING T54927
where ( T54927.OTHER in ('') or T54927.OTHER is null )
minus
select T54927.UPDATE_TYPE as c1,
T54927.UPDATE_TIME as c2,
T54927.DB_NAME as c3,
T54927.CATALOG_NAME as c4,
T54927.SCHEMA_NAME as c5,
T54927.TABLE_NAME as c6
from
MPO_OWNER.MPO_EVENT_POLLING T54927
where ( T54927.OTHER = 'cac7057v' )
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121787>>, Close Row Count = 1, Row Width = 384 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Sending query to database named Event Polling (id: <<121830>>):
insert into
MPO_OWNER.MPO_EVENT_POLLING("UPDATE_TYPE", "UPDATE_TIME", "DB_NAME", "CATALOG_NAME", "SCHEMA_NAME", "TABLE_NAME", "OTHER") values (1, TIMESTAMP '2009-03-27 16:59:19', 'Trading', 'remedy', 'MPO_READ', 'MPO_POSITION_DATE_CHOICES', 'cac7057v')
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121830>>, Close Row Count = 0, Row Width = 0 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121830>> DbGateway Exchange, Close Row Count = 0, Row Width = 0 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121830>> DbGateway Exchange, Close Row Count = 0, Row Width = 0 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121787>> DbGateway Exchange, Close Row Count = 1, Row Width = 384 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121787>> DbGateway Exchange, Close Row Count = 1, Row Width = 384 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Sending query to database named Event Polling (id: <<121831>>):
select T54927.UPDATE_TIME as c1
from
MPO_OWNER.MPO_EVENT_POLLING T54927
where ( T54927.OTHER = 'cac7057v' )
group by T54927.UPDATE_TIME
having count(T54927.UPDATE_TIME) = 1
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121831>>, Close Row Count = 1, Row Width = 16 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121831>> DbGateway Exchange, Close Row Count = 1, Row Width = 16 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Execution Node: <<121831>> DbGateway Exchange, Close Row Count = 1, Row Width = 16 bytes
+++Administrator:fffe0000:fffe021b:----2009/03/27 17:02:14
-------------------- Sending query to database named Event Polling (id: <<121875>>):
delete from
MPO_OWNER.MPO_EVENT_POLLING where MPO_OWNER.MPO_EVENT_POLLING.UPDATE_TIME = TIMESTAMP '2009-03-27 16:59:19'
What am I missing? My NQServer.log shows this:
The physical table Trading:remedy:MPO_READ:MPO_POSITION_DATE_CHOICES in a cache polled row does not exist.
Any thoughts are appreciated.
Thanks
Mano

How to set permissions on devicemapper block device

I'm setting up a new RAC on RHEL5.1 using device mapper for multipath functionality.
How should I set the permissions for the block devices I'm going to use for ocr, voting and asm?
/dev/mapper/ocr1
/dev/mapper/voting1
etc.
Regards
Jon-Arne Storelv

Markus,
You are right about udev changing drastically between RHEL 4 and RHEL 5. The paper I referred to does include some guidelines for setting permissions for RHEL 5 as well. Here are some relevant extracts from the same pdf document:-
# From udev.permissions section
This file was obsoleted in later versions of the 2.6 kernels such as SLES10, RHEL5 and
Oracle Enterprise Linux 5 (OEL5), that functionality was merged into the rules files, which is explained later in this paper
...and later you will find this example in the document
For RHEL5, OEL5, SLES10
• Create a file /etc/udev/rules.d/99-raw.rules with the following content
with the following content
KERNEL=="raw[1-2]*", GROUP="oinstall", MODE="640"
KERNEL=="raw[3-5]*", OWNER="oracle", GROUP="oinstall", MODE="660"
/etc/udev/rules.d/50-udev.rules on Centos 5 gives plenty of examples of settings for all different types of devices. We really need to specify OWNER, GROUP and MODE for devices that RAC will use in a rules file.
Thanks,
Satish

Help Needed: Automator Applescript for Folder Action - Encode Video

Hi !
I have created an Automator Applescript for a Folder Action to do the following:
When a new video file is moved to the target folder (i.e. Download of Vuze is done), automatically launch the Applescript Action that does the followin g(Applescripted):
1) Using "run shell script" and FFMPEG on a UNIX command line, determine Width/Height, Framerate, Bitrate
2) Calculate encoding parameters (slightly reduced bitrate, reduced Aspect etc.)
3) Using "run shell script" with ffmpeg on the command line and the calculated parameters to encode the video file
At the same time, the action is written to a log file so I know if a file is recognized, when encoding started etc.
It works fine if I save this Action as an .app, make an alias on the Desktop and drop video files on it.
It also works fine if I attach the script to a folder as a folder action and drag a video file in there.
However, when I attach the script as a folder action to the Vuze download folder, it encodes only some video files, i.e. if there was a download of 5 files, chances are good that it will not encode 1 or 2 files out of those 5.
If for example a second download finishes while the encoding for the first download is still going on, sometimes the second file starts encoding after the first encode finishes, sometimes it does not, the file does not make the log file at all, i.e. the folder action missed it or the automator action dropped it because it was still encoding. Still, sometimes it happens, sometimes not.
As I need a solution that is 100% accurate, I would like to ask if there are any ideas on how to do this better maybe? As I am not an Applescript Guru, I would need some help to know what works and what doesn't and what the syntax is.
My main idea right now:
Similar to how ffmpegX works with its "process" application, have a second script (as .app) that receives the files to be encoded from the automator action and puts them in a queue, then proceeds to encode this queue while the main automator action is free to receive the next file.
Writing this second app is quite straightforward (a modified version of my current script) but I have some questions I need help with:
1) How do I call another applescript from within an existing applescript that launches the new applescript in a new process?
2) How do I pass parameters to this new applescript?
3) In case of this "Queueing" Idea, once I called the external applescript the first time, how do I make sure when I call next time, that I don't open a second instance of this script but rather pass another queue item to the original instance to be processed?
Or in general: Is there a better way to achieve this automatic encoding solution that I have not thought about?
Alternatively:
Does anyone know how to call the "process" application that comes with the ffmpegX package with the correct parameters to use as a queueing / processing tool?
Thanks!
Joe
Message was edited by: Joe15000
Message was edited by: Joe15000

To do this, I created an Automator workflow with an Applescript snippet to change the 'media kind'.
Here is the 'Run Applescript' workflow step code:
on run {input, parameters}
          tell application "iTunes"
                    set video kind of (item 1 of input) to movie
          end tell
          return input
end run
Prior to this running, I have an 'Import Files into iTunes' workflow step.
You can switch out 'movie' with: 'TV show', 'music video', or anything in ITLibMediaItemMediaKind.
Good luck,
Glenn

AppleScript for setting Permissions Automatically -help needed

Similar Messages

Maybe you are looking for