How to intrigrate ALV report into Web Dynpro

Hi Experts,
I Done one ALV Report and the same thing should be developed on web dynpro also...so, i want to intigrate the alv in web dynpro is this possible..if so, pl. let me know..asap. Thanks & Rewards,
Satish

Hi
ALV in Web Dynpro ABAP is different from Dynpro ALV.
In WebDynpro ABAP ALV is SAP's standard component SALV_WD_TABLE
You have to use this component inside your component.
the following tutorial will help you
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/60ea94e5-0901-0010-c3bb-aad5ea9620d8 [original link is broken]
Abhi

Similar Messages

Double Click in ALV Report in Web dynpro ABAP4

Hi All,
I am very much new to WDA4 , can anybody plz guide me how to enable double click in ALV Report in Web dynpro ..
Plz help it is urgent .....
Thnks
Sahil

Hi All,
I am very much new to WDA4 , can anybody plz guide me how to enable double click in ALV Report in Web dynpro ..
Plz help it is urgent .....
Thnks
Sahil

How to inject external configuration into web dynpro application

Hi colleagues,
I've a web dynpro application, which has some hard coded hostnames in the source code.
All hard coded hostnames should be moved to some else place, either engine parameters or external configuration file.
Searching over the project, hard coded hostnames were found in following file types:
- wdmodel files
- properties files
- java files
How to inject external configured hostnames into web dynpro applications, especially wdmodel and property files? Are threre best practices?
Thanks for any hint!
Best regards
Daniel

property file is supposed to do that job, you can configure the value at nwa after the application is deployed.
Configuring a Web Dynpro Application (Java) - IT Scenarios at a Glance - SAP Library

How to Email POWL Reports / Apply Web Dynpro ALV Table Layout Settings

Hi all,
we want to be able to automatically extract POWL reports and email them to users in a batch job.
We can refresh a POWL report using FM POWL_QUERY_REFRESH, and access the raw report data using method CL_POWL_QUERY_ACCESSOR=>GET_CACHED_RESULTS.
However this merely gives us a table of raw data. No view layout (ie. Web Dynpro ALV table layout) settings have been applied, so there is no hiding or arranging of columns, row sorting, calculations or filters.
Ideally we would like to be able to specify a query and view layout. The batch job would then refresh and extract the data, and format the data according to the view layout before sending it on as an attachment in an email.
Does anyone know how to determine and apply Web Dynpro ALV table layout settings to format table data outside of the Web Dynpro environment ?
Thanks & regards,
Grogan

Hi Grogan,
Did you find out how this works..i also have the same issue.
Thanks
Jdsouza

How to call standard report in web dynpro abap.

Hi All,
   I need the output of one standard report e.g RHXSTR00 on web dynpro abap.
   How can I achieve this?
   Please help!!! Points will be rewarded.
   Thanks in advance!
Cheers,
Darshna.

Hi Darshna,
The report result is ALV and in most of the cases we generally do not have function modules or any other easy way to get the output.
In such cases the best approach which we follow is, to run this in background mode and generate the spool and display the ouput in PDF.
But if intertactive form is not present in your requirement then we need to debug the logic of the report (if no FM or class present) and get the results and display it in the View.
Best regards,
Suresh

How to call BI report from web dynpro

Hi ,
How to call BI report from webdynpro application and what are the prerequisites for that .
Please provide an example to work with BI application frame UI element
Thanks

Hi Rajpal,
Please go through this..
calling BI report
Cheers,
Kris.

How to call a method of a zclass into web dynpro application

How to call a method of a zclass into web dynpro application

Hi,
if the method is of type static then u can access it directly as below.
call method class_name=>method_name
If the method is instance method then U need to create the object of that class. then through this object u can access the method.
CALL METHOD Obj_name->method_name

How to integrate BW Hierarchy into Webi?

Hi Everybody,
I need to create a report based on 0FIGL_V10_Q0001 in Webi and this query has a hierarchy and i have created the hierarchy from the designer itself. In webi, when i tried to pull 1 of the hierarchy dimension with key figure, it shows no data but if i remove the key figure i can view the information. May i know what went wrong with it or do you have a details on how to integrate BW hierarchy into Webi?
Your assistance on this is greatly appreciated.
Thanks
Best Regards,
Hizam

Hi,
use the following link:
https://sapmats-us.sap-ag.de/download/download.cgi?id=SOTBBWVP5VS0BRNUJFQWYL5A6L3GXGPDJ59UKUDZMA1UVE1WOQ
(should work properly in about 10 min)
- merge the regsitry file to your BusinessObjects Server
- Restart the Services via a restart of the Server Intelligence Agent
- re-run the report with keyfigures
You should see 2 logfiles being created on the C:\ root folder
attach the logfiles to this message (do not copy past the content).
I assume the underlying BI query works fine.
Ingo

BI Reports in Web Dynpro iView

Hi Experts,
I need a favour from you in estimating small requirement with BI reports & Web Dynpro iView.
My first query, is it possible to build horizontal drilldown menus
Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.
If all the above are possible, I have a requirement that should fulfil the below
In a portl iView, I have several BI Reports displays based on called report. But at the moment links to the report are in simple hyper link. Instead of hyperlinks, I want a horizontal menus as hierarchical/child structure. To acomplish this I chose, Web Dynpro as the best solution.
I have some development exeperience in Web Dynpro, but never encounterd such a requirement.
If any one can help me out in estimation, posibilites of the solution that would be a great help for me.
Your help will be highly appreciated.
Thanks in Advance,
Chinna.

Hi Chinna,
Check the following threads:
Show BI report in a Web Dynpro App
BI data in Web Dynpro
Re: How to create a Report from WebDympro
Re: BW server details from webdynpro
/community [original link is broken]://Bi,Portal Webdynpro
And a How To Guide:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a303e745-0d01-0010-b280-802bca844b8f
*Second query, is it possible link the BI Reports from Web Dynpro application
third query, is it possible to put both Web Dynpro iView & BI Reports view in one Portal iView.*
You can not assign two types of app in a single iview but you can have multiple iviews assigned to a page.
This will guide you.
Regards.
Rajat

Import web service from service registry into web dynpro

HI, when i import web service into web dynpro model, it asks me to create service group or if i choose no service group configure, it ask me the destionation for metadata and excution. i import service from service registry. what does the service configuration mean? and if i choose no service group, where should i configure the destination?thanks

Hi Lei,
The metadata and execution destinations are relevant for runtime. On runtime you web dynpro application will access the web services you imported via these two destinations.
You can configure the metadata and execution destinations in the following location:
login on the CE system Netweaver Administrator: http://hostname:portnumber/nwa
On NWA navigate to SOA Management --> Technical Configuration --> Destination Template Management.
In this section of NWA you can define the Metadata and Execution destinations for your web services.
Please check the following blog for more information:
How to Consume an Enterprise Service from the ES Workplace in Web Dynpro in the new SAP NetWeaver Composition Environment 7.1
Regards,
Yasar

Displaying reports in web dynpro view

Hai all,
Iam working on a project in webdynpro which is used for the newly joined employees to fill their personal info.After they do that I need to display the reports to the Admin to Process the request for generating employee id.I have never worked with reports in web dynpro.All I need toknow is
--->Coding for getting the reports containing the requests and displaying them in the view.
Also this project is done using SAP HR---IS there any change in coding to retieve data from backend when using SAP HR.
Any help and answers will be appreciated.
Thanks n Regards
Sharanya.R

Hi,
You can try using UI element Iframe.
URL can be mentioned in source property of Iframe as http://www.google.com.
Re: How to Add URL in a view .
Regards
Manas Dua

Debugging into web dynpro

Hi there,
How can I step into web dynpro component while debugging a process?
Regards,
Ricardo Giacomin

Hi
1.Enable remote debugging(external breakpoint) on function module
2. Use same UserID that enables debugging and used in JCo Connection.
3. Run your application, it will take you to SAP GUI screen when breakpoint found.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30

How to browse local file using web dynpro

hi everyone
How can I browse local file using Web Dynpro?And read file names into Context or array. I have tried the following code but its not working
String resourcePath = WDURLGenerator.getResourcePath();
String depObjResourcePath = WDURLGenerator.getResourcePath(Test);
WDDeployableObjectPart appPart = WDDeployableObject.getPart(Test, TestApp, WDDeployableObjectPart.APPLICATION);
help required urgently
Thanks & Regards
Jaspreet Kaur

Reply in
how to browse local file using web dynpro
Regards,
Ashwani Kr Sharma

How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000

Post Author: ltkin
CA Forum: WebIntelligence Reporting
Hi,
How to build a report in web Intelligence using Store procedure under Microsoft SQL Server 2000 ?
Regards,

Hi ltkin,
Unfortunately, it is not possible in Xir2 to create Webi reports from stored procedures.
Webi reports can only be created from Universe. So in Business Objects XIR3 we can create a special universe that enables Web Intelligence user's to access stored procedures residing in the database. This is the only way that Web Intelligence user's can access stored procedures.
Please let me know if the above information helps.
Regards,
Pavan

Creating a report in Web dynpro using OOPS concept

Hi all,
Iam new to web Dynpro, i need to create a report in Web Dynpro using oops concept. can any one guide me regarding it.
Regads,
Easter

Hi,
Please refer to these links -
DEMO_COMMON_ASSISTANCE1 -Example for standard component
http://help.sap.com/saphelp_nw04s/helpdata/EN/43/1f6442a3d9e72ce10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/43/1f6442a3d9e72ce10000000a1550b0/content.htm
Regards,
Lekha.

How to intrigrate ALV report into Web Dynpro

Similar Messages

Maybe you are looking for