AppleTv 3 turns on for 15 seconds

I just got my ATV 3 today and I've noticed something very strange. Every hour or so it seems the light on the front of the APT turns on for ~15 seconds. After that it turns back off. I wanted to see if anyone else has noticed this. I have an ATV 2 as well and I have never seen it do this.
Thank you

I see this too. It turns on much more frequently than the Apple TV 2. I'd see the ATV2 do it very, very infrequently, this is hourly or so.

Similar Messages

Why does my macbook pro turn on for two seconds then off?

my mcabook pro only turns on for couple seconds then off. How do I get it to work ? i have important files on there.

Boot to Recovery and try repairing the startup disk via disk utility
OS X: About OS X Recovery
an you start in Safe Mode?
OS X: What is Safe Boot, Safe Mode? - Apple Support
Try reinstalling the OS. This will not delete anything. The following works for Yosemite too
OS X Mavericks: Reinstall OS X
Also,
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

HT201295 My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 ) when I use any camera needed app. Please help me.

My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 with osx Yosemite) when I use any camera needed app. Please help me. Its getting a little annoying.

If restarting Mac or reinstalling OS X does not correct this symptom, you likely have a hardware problem. Contact Apple Support or an Apple Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac OSX 10.10.1

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

same issue, either your wiring or display itself is going bad. for me, it was the display but luckily still under warranty

Hp pavilion 15 screen turn off for few second when i turn on or off charger

Hello,
I bought new hp pavilion 15. i notice many time when i turn on or off my charger, screen turn off for few second then after few second screen turn on. please help me out its furstating me .
This question was solved.
View Solution.

>> It is customary and in this case Necessary for you to provide the exact model of Notebook you have a problem-with. [ There are MANY variations of HP Pavilion 15-T Models, for example. ]
>> You should always be sure you have installed/applied ALL updates for all of your Notebook's hardware devices, and ALL Windows Updates labeled "Important" and ALL "Optional"-section Windows Updates for any hardware device in your Notebook which the Windows Updates service detects (and offers an Update for).
>> For example, this link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6787... has the latest HP Drivers and Patches for a specific variant of the Pavilion 15-T.
>> AFTER you are certain you have all the latest drivers and patches in-place, you can try the 'old Trick' as follows: Shutdown Windows; when your Notebook has turned-Off completely (after Shutdown completes), THEN remove the AC Adapter connector and remove the BatteryPack.
>> Hold DOWN the power-button continuously for a full 62 seconds. Then put your BatteryPack back in your Notebook. Do NOT connect your AC Adapter yet. Power-On the Notebook and Logon into Windows. Check the Control Panel\Power Options settings and find out the Charge Level of your BatteryPack. If it is below 25%, then (and only then) plug in your AC Adapter and connect it to your Notebook... and let the BatteryPack charge up "completely" to 98-100% Level. *Note: if your Adapter has a removable AC cord-connector, be certain that connection is 'tight'. <Do NOT stick your fingers or ANY object into any AC Adapter!> If you even think your AC Adapter is faulty, GET A NEW ONE! Damaging a $400-$800 Notebook PC is NOT worth it, versus the cost of a New Adapter.
>> Use the built-in Help functions of your Notebook to find out how to DISABLE(!) "Hibernation", and eliminate that TROUBLE-CAUSING 'feature' of Windows PCs. When you have done so, always REStart Windows, to be certain the changes are applied. *Many changes and Updates take place 'Fully' only "during" Shutdown and/or "during" Startup of Windows PCs. [While Windows O.S. is "running", most of it's System Files are LOCKED.]
>> FYI: always let your BatteryPack run down to it's Lower setting BEFORE you plug-in your AC Adapter/Charger. Charging any rechargeable BatteryPack at "mid-charge-levels" causes shorter BatteryPack life...

Mac Book only turns on for 15 seconds after SMC reset

I've had this Macbook for a couple years now. The charger has already gone on me once. A while ago, the charger stopped working (no light), so I got it replaced under warranty. They sent me just the power block and the cord that goes into the computer.
With the new charger, the light still doesn't come on, but I know it's charging because the battery would be long dead by now.
However, the computer won't fully turn on. The power button does nothing. However, if I do an SMC reset, I can get it to turn on but after 15 seconds, it turns back off.
Previously, it turned on, then I could enter my login details, but the screen would turn off before anything would load. I could hit the power button, and it would awake the computer again. It seemed to be in sleep mode then. I never got to anything other than the login screen.
As I said before, right now if I do a SMC reset, it will turn on, but not before. And it only stays on for 15 seconds or so. I never get past the Apple logo.
Any ideas? Thanks so much! Let me know if I need to clarify anything.

Here are the options:
http://support.apple.com/kb/he57
https://www.apple.com/contact/
Ciao.

K7N2 Delta. Turns on for a second, then shuts down

It just stays on for a second and then shuts off

i wish i could read minds on distance.
post amps on the 3.3v 5v and 12v rails on the psu.
is written on a label on the psu.
then post ALL your hardware.
cpu memory harddrive cd and so on and also what you have tried so far

PS4 turns on for split second then turns off (Not BLOD)

My PS4 was purchased via preorder on launch day here in South Africa - Friday 13th December. After working for 2 days,it now fails to turn on. I've read about the blue light of death that just pulsates continuously but what I'm getting is a beep and blue light for less than a second before it turns off completely with no light.
If I then press or hold the power button again, I get nothing. I have to unplug it from the wall and replug it in and then if I press the power button again, it does the same as before - beep and split second blue light before going dead. Here is a video I took of it:http://t.co/VIrDS9KI1G I can't get into safe mode. If I try to hold the power button down, it just does the same as above. It doesn't stay powered long enough to reach 7 seconds. I've also tried removing the HDD and booting without the HDD in to try and force safe mode but again, it does exactly the same as above. I've tried using different plug points and adapters that I know work and I've done so with no other devices plugged into these points or adapters. In my highly amateur opinion, it feels like a power supply issue where power is cutting practically immediately.

It's a power issue, I've noticed this because I was moving my PS4 from downstairs where I tested it, to my gaming room where it'll live FOREVER! lol... and the power was unplugged, but I touched the button as I lifted the console. It beeped as if it was going to come on, then because it had no power it just went off again. Just like you describe. So the console is acting like it does when it has SOME power, but not enough in my opinion.
Once I got it upstairs and plugged in the power, it came on and all was ok.
I recommend:
Giving the PS4 ITS OWN PLUG SOCKET, don't plug it on a multi-adapter where it's power might be shared/weakened.
Give the PS4 a moment of being plugged in so it can store enough power to turn on.
Make sure your cables are all good,

Toshiba A65-126 Laptop turns on for 3 seconds shuts down immediately. Please Help !

Hello can somebody please help me? I had this laptop just sitting around so My niece needed one and I thought I would clean it out with the disc to out of box condition. Didn't want any of my stuff left on there. Little did I know I would spend 3 full days trying to get it to work. Long story short. I got it to work with IE 8 hooked her up with yahoo account and facebook account. It still needed minor adjusting so I shipped it from Fl. to NJ and when I took it out of the box and plugged it in...............yep .....no goodski.........Please help....what in the world could it be? I took the battery out and just plugged it in. No Good. It turns on blue light for about 2 or 3 seconds and then shuts right down.
Please, any suggestions will help...I wanted to suprise her for Christmas with it. I will try anything...Please...
Thanking you in advance ....

I'm sorry, Lynner, but it looks like I'm too late for Christmas. If you still need help getting it working, you may want to look at this article.
What can I do if my Windows 7 or Windows Vista laptop won't start?
- Peter

My computer will turn on for a second then shut off.

I had just shut down the computer 30 min before so when i go back to turn it on i press the on button sounds like its starting up then shuts off it has a full charge took out the battery and tried it again. still doesn't work i kept try to turn it on and on but itll just act like its starting up then shut off. sometimes if i let go of the on button too early the light will just come on then immediately shut off. what do i do everything i own thats apple has been breaking this week.

- If it is only one app try deleting the app and then redownload/install the app.
- Reset your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore your iPod. First from backup and if problem persists restore to factory defaults/new iPod.

My I pad only turns on for a second then runs out of battery again

So my ipad ran out of battery so I connected it to a wall charger. It re-boot but the lock screen flashes for about a second then runs out of battery again. I have tried well over 20 times to fix it but nothing worked. Any suggestions?

Not charging
1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush

Hi, today I was making a FaceTime call when a friend of mine knocked my iPhone 4s onto the ground. The screen turned blue for ten seconds then the phone rebooted. What happened?

I haven't noticed anything wrong with the phone, I just want to know what happened and if I should do something about this.

After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

Whenever i use Safari or play some video, my browser shuts down automatically. It turns black for few seconds and then homescreen appears.. I am encountering this problem after updating my ipad to IOS 5.. Kindly help me guys. Thanks.

Guys need your help, as i am newcomer to this community.

Update:
I have since gotten rid of the Asus Motherboard and the OCZ Memory. I swapped them out for a Biostar motherboard with an Ati chipset and PNY DDR3 1333Mhz memroy.
I was quite confident that the motherboard was causing all of my problems, mainly due to the fact that i have another computer in my house that is running a quad-core intel core 2 duo with an intel chipset and I don't have this problem at all on my other system.
After I did the swap I made sure to install all of the latest drivers and after everything was complete I logged on to facebook and i was able to play Fishville with no problems. BUT, as soon as I loaded Cafe' World my computer instantly shut off.
I have been monitoring my temperature with the pc probe that came with my motherboard and my core temps NEVER go above 48 degrees Celcius.
I know for a fact that this isn't a heating issue. Something is not right and I wish someone here at adobe could try to point me in the right direction, take the time to look at what all I have tried and give me a creative point of view on this.
The only thing that is not new in this machine is the hard drive.. and I know that isn't the problem because I tried a new hard drive already and it didn't fix it. So I took it back, as I didn't need it. There has to be a compatability issue with adobe flash player and some component in my system somewhere.. Its making me crazy.
I have never come accross a problem on a computer that I couldn't fix and this is the first time I have ever had to ask for help and I don't feel like I am getting any help whatsoever from Adobe.
At least Microsoft stayed on the phone with me for 2+ hours and TRIED to help me resolve this issue... to no avail.

Iphone turns for a second than shuts off

last night turned my 3gs off now when i try to turn it on it turns on for a second than shuts off

Assuming your battery is not dead have you tried DFU or recovery mode sync?

AppleTv 3 turns on for 15 seconds

Similar Messages

Maybe you are looking for