Application fails to start after updating to AIR 2.6 on Centos OS

Hi Gordon,
   I'm using Centos OS and need to update the Adobe Air from 2.0 to 2.6. I downloaded the new released and used the rpm command.
   After that i type rpm -qi adobeair and clearly specify that I have Adobe 2.6.0.
   Well, the fact is that when I try to run our Air application, it simply does nothing.
   What should i do?
regards.

Similar Messages

ColdFusion 8 Fails to start after update Java for Mac OSX 10.5 Update 4

I have been using ColdFusion on a Mac for years. Now CF fails to start after I updated Java for Mac OS X 10.5 Update 4. I usually start by typing in the terminal window sudo /Applications/ColdFusion8/bin/ColdFusion start.
There is a crash report but I don't know how to read it. See attached.
Please help, I need this working for my job.
Thanks...Colin

Dear Craig,
Macbook Pro 2.4GHz Intel Core 2 Duo 4 GB RAM
I'm sure that this is 64-bit
CF 8.0.1 Enterprise Build 3080
I had moved the Java SE 6 to the top in both Plugin and Applications. The
correct version is showing in the terminal window. See below.
Last login: Thu Jun 18 11:27:09 on ttys001
Beta-4:~ Colin$ java -version
java version "1.6.0_13"
Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
Beta-4:~ Colin$
CF will not start. I have the activity monitor open, and when I start CF you
see it in the activity monitor for a few seconds as it starts up. When the
message process is completed in the terminal window CF disappears in the
activity monitor.
Any suggestions?
C
Hi, Colin,
My apologies but I forgot to ask 2 questions: (1) What kind of Mac you have
(Intel or PowerPC)? (2) What version of CF are you running and what installer
did you choose (8 or 8.0.1, 32-bit, 64-bit, etc.)?
To start, try the following:
1. Normally you'd shut CF down first ... but that's not necessary for you
2. Open Java Preferences again
3. Select Java SE 6 and move it (drag) to the top spot in both section (Applet
Plugin and Applications)
4. Open Terminal
5. Type java -version (you should see 1.6.0_13 as the new version)
6. Try to start CF again
This may not work (I've had issues with it) but it's technically how it's
supposed to work. With the Java Preferences utility, you're visually setting a
default JVM (you can do it with commands in Terminal but this is much faster
and easier).
If CF still won't start, look for the jvm.config file in your CF application
folder (try /Applications/ColdFusion8/bin or
/Applications/ColdFusion8/runtime/bin -- the latter is where a jvm.config file
is on my machine for a particular version of CF that's installed similar to
yours). You can override the JVM in this file but, hopefully, that won't be
necessary!
Best,
Craig

Session failed to start - after updating to IOS 7

I've updated to my iphone 4 to IOS 7 and now it won't sync with itunes. Its says "session failed to start". Help!

On the advice I got from others, here's what I finally did:
1. I connected my iPhone to my PC and backed it up to iTunes. Even though the phone doesn't sync, it will still back up and it did.
2. I then went in to settings on my iPhone under "Reset" and did the "Erase All Content and Settings", while still leaving my iPhone connected to my computer.
3. Once the phone booted back up, iTunes asked me if I wanted to restore my phone from back up. I chose restore and it restored my phone back and it is now working 100%. I'll add that it froze up during the restore process and I simply rebooted my PC and the ran sync and it finally worked. Took forever for my apps to all load back (couple of hours), but its fixed and working great.
I cannot tell you how upset I am with Apple. Many of us have this same issue and Apple has done nothing to help us or fix it. I've wasted 12 hours of my life on something that should have been simple and seamless. Isn't that the point of Apple and iPhones?

Firefox not starting after updating from v24 to v32 on centos 6.5

I have updated my firefox from version 24 to version 32 recently released for Centos 6.5 in the official packs, but after updating now firefox is not at all starting.
Even the first screen where it checks for add-ons dependency is also not coming up, what I can see is just firefox starts and crashes within seconds without showing any screen.

I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing.....

Plasma 5 fails to start after update

After last kde packages update, my plasma desktop won't start anymore. When I run 'startkde', I get the error:
➜ ~ startkde
startkde: Starting up...
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
KCrash: Application 'kdeinit5' crashing...
KCrash: Attempting to start /usr/lib/drkonqi from kdeinit
sock_file=/run/user/1000/kdeinit5__0
startkde: Shutting down...
klauncher: Exiting on signal 1
startkde: Running shutdown scripts...
startkde: Done.
I found that running with sudo it works. I tried chowing and chmoding 777 the directory /run/user/1000 but made no difference. All other desktop environments and applications seem to work normal. What could be causing this issue?
Thanks in advance and happy new year

Found the solution: https://bugs.freedesktop.org/show_bug.cgi?id=85657
Thx!

X240 window 8 Pro - system failed to start after update

Mircosoft pushed an update to my week old x240. After the update, I cannot load window8 pro any more . "Auto repair" says PC didn't start correctly. When I refresh PC , "the drive where Window is installed is locked Unlock the drive any try again." My BitLocker has been activated and Laptop was running fine before this update on 8/4/2014. Called Lenovo and Mircosoft, of course no help. PLEASE HELP!

Hello sir,
Here's what you need to do.
1. Enter into BIOS setup and set Virtualization as disabled and reboot system.
2. After booting windows 8, enter into Control panel and remove bluetooth driver.
3. Download and install Ralink Bluetooth driver version 9.2.101.10 (SP59632)
4. Reboot system and enable Virtualization Technology again.
Hope this helps.
I feel like asking for thumbs up after I tell you to mark my post as Kudos if it solves your problem.

Applications crashing/not starting after update to Gnome3.6

So, I updated to Gnome3.6 two days ago and since then serveral applications aren't working properly anymore:
Pidgin crash when I try opening a conversations window (only tried with ICQ) - interestingly deleting and readding the ICQ-account works as a temporary solution (until the next reboot).
Winefish shortly shows that it is starting and then disapears.
gnome-tweak-tools and gnome-control-center don't start.
audacious crashs when I try opnening the settinggs as well as tring to access the details for a song.
Nautilus crashs when opening the properties of a file or directory.
GIMP crashes when opening an image or creating a new image.
I suspect that all these actions invoke the same troublesome funktion...
I tried deinstalling gnome and reinstalling it, but that didn't change anything.

I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing.....

IBook fails to start after update

Hello,
I completed the most recent software update and shutdown my iBook. Today when I attempted to turn it on – nothing. No chime, no screen and it will not turn on.
The battery is fully charged and the AC adapter is working (the green ring is lit when plugged in). I have taken the battery out and unplugged it as well as followed the trouble shooting information (Apple - troubleshooting portables that won't turn on or start up)with no luck.
I am afraid it’s hardware related – However, like anybody who has not run a backup in a while….. I was hoping someone has another idea or has experienced this.
Thanks.
Ibook G3 Mac OS X (10.4.6)

Steve,
Your iBook sounds like it could have a bad DC-in board. Do you know anyone with another battery you could try in your iBook? Or are you close to an Apple Store where you could take it in and have them try a different battery?
When my husband's adapter tip broke off in the adapter port, damaging the DC-in board, his iBook would only run from a charged battery. It would not run from the adapter, and it would not charge the battery. He still could use it with a charged battery, and he and I swapped batteries, allowing my iBook to charge both batteries, until he could get his iBook fixed.
When you push the test button on the battery, how many lights do you see?
If your iBook will run from a charged battery, chances are that it is the DC-in board causing your problem. All the green light on the adapter means is that the battery is not charging. When everything is working right, that means the battery is fully charged. When things aren't working right, there may be other reasons why the battery is not charging.

Leopard fails to start after update

I recently updated my g5 to Leopard (clean install) and all was fine until last night when I was prompted with five updates (Quicktime, iDVD, iPhoto, iTunes and Garageband) I downloaded and installed (got the update boot caches message). The G5 rebooted but is now stuck on the grey apple screen with the twirling icon and the fans are howling away.
Has anyone exerienced this? Need help.
Thanks

Ok so here's what happened for those who end up in a similar situation. I booted to 10.5 and ran the verify...couldn't verify...ran repair...couldn't repair...ran Disk Warrior...found many error's and fixed them but couldn't replace the directory. So I had to rebuild from a clean install...again. Don't know wht so many errors...possible HD replacement needed. However, the moral of the story goes...
Don't perform any updates until you know for sure that your HD has no directory errors.

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

I already had itunes installed on my pc. I received an update and tried to install it. I got a message
This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
How do I repair/sort out this error/fault
Thanks
David

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1199 I updated Itunes on my PC and now when i try to open Itunes i get a error message saying "application failed to start because MSVCR80 was not found" then whenI close that pop up I get a error message saying "windows was not installed correctly Erro

I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659)

Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoit

help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

Application fails to start after updating to AIR 2.6 on Centos OS

Similar Messages

Maybe you are looking for