Application in Software Center ask again for installation after succesfull instalation
SCCM 2012 SP1 CU5
I have created msi application version 2, in superseding I configure uninstallation of old version
App deployed for collection and showed in Software Center.
If I install it in Software Center, old app is removed, new installed (appenforce.log tells it), and its ok for some time.
After PC checks for software deployment, Software Center asks to install new app again.
But its installed and works.
in AppIntentEval.log I can see this record:
<![LOG[ScopeId_C499A53E-0FFD-4150-8731-0DF9D0B88558/Application_07897b40-25ff-4c91-af1e-0c5a914bd0ee/6 :- Current State = NotUpdated, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = Клиентская часть системы
DIRECTUM 4.91.1908]LOG]!><time="09:54:55.223-300" date="11-27-2014" component="AppIntentEval" context="" type="1" thread="1364" file="appconstructs.cpp:3057">
What does it meens Current State = NotUpdated ?
How can I fix it?
Hello,
Is it required or available? Is it deployed to user collection or device collection?
This thread may give us some clue:
https://social.technet.microsoft.com/Forums/en-US/b785809a-2234-4b67-8838-c1c923ca1601/application-deployment-status-not-updated?forum=configmanagerapps
Similar Messages
-
I purchased a software license for photoshop elements 12. I started the process to download the software and provided the serial number on the download card. Since the serial number provided was correct, the download started and completed. Once installed the system started to install the software. Again I had to supply the serial number. This time the system will NOT accept the serial number. I entered it again. Not accepted. I tried it again, this time with dashes. Again the serial number is not accepted. What do I do?
Is there any message provided when serial number is not accepted? If so, what does it say?
-
Unable to advertise software application via Software Center
I have an issue of advertising my software application via software center. I doesn't matter if I set it to deploy as Required or Available, the deployment just could not get to install to my targeted machine or appear in my Software Center. In the
deployment status, it also shows No Status even I have targeted since last week and the targeted machine is always connected.
I have viewed the execmgr.log, but could not find the package id in the log. Could it be stuck somewhere that could cause it unable to complete the process of advertising it to the targeted machine, whether it is via Required or Available deployment?
I am however able to deploy old/new the patch updates deployment and able to install the software package to my DP. However im still able to get OLD deployment of software apps or TS but not
NEW deployment of any software apps or TS since the last 2 weeks. I am also able to mplist and mpcert from the targeted machine to my MP, so meaning it could communicate to get policies.
Im stuck now. Any other logs in particular that could help me right now to determine the root cause?There is a constant error of
1) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420076-DE4001C2-22DFAA8D from the Policy table
2) Failed to update policy DEP-DE420076-DE4001C2-22DFAA8D and policy assignment {ecadc449-d862-4ad9-b75e-252d753ced8f} based on package DE4001C2, program Install (TS DC_Demo) and offer D
3) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420081-DE4001C2-22DFAA8D from the Policy table
4) Failed to update policy DEP-DE420081-DE4001C2-22DFAA8D and policy assignment {43af1ebc-32b5-459b-8749-573a87df22b8} based on package DE4001C2, program Install (TS DC_Demo) and offer D
5) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420076-DE4001C2-01D4CDDC from the Policy table
6) Failed to update policy DEP-DE420076-DE4001C2-01D4CDDC and policy assignment {f4041e0f-da02-4c6e-8a25-62e95a123abb} based on package DE4001C2, program Install (TS HR_FI) and offer D
7) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420081-DE4001C2-01D4CDDC from the Policy table
8) Failed to update policy DEP-DE420081-DE4001C2-01D4CDDC and policy assignment {d7884252-9e8b-4854-b175-a0c797130930} based on package DE4001C2, program Install (TS HR_FI) and offer D
9) Failed to create policy and policy assignment based on package DE4003E6, program Install (TS) and offer DE420076
10) Failed to create policy and policy assignment based on package DE4003E7, program Install (TS) and offer DE420076
I don't understand why it keeps on saying "based on package DE4001C2". I don't have any package with this package ID.... Not sure why I am seeing this in my logs. -
while downloading any free application my iphone 4 ask me for apple ID and passward when i apply a valid apple ID and passward it prompt an error "cannot connect to itunes store" please help me
Sir i am talking about application store it opens show every thing but when trying to install any thing it said can not connect to itunes store. what should i do i use all methods of reseting and related to time mentioned in replies of people but all my efforts in vain i wish if i have some extra money i throw my Bloddy Iphone towards wall. Please help me
-
I need to make list of 700+ dvds that can be updated alphabetically as I attain more. I'm new at computers, lbought an iMac (with Lion). What application or software will do this for me the easiest?
Yes, the ColorPicker would be great, except as far as I can tell there's no way to assign names to the colors in my custom data provider. The user needs to know the name of the color (eg. P01 - Wisteria), but the ColorPicker only shows the hex values. Unless there's a way to change that?
Repasting the two code chunks from above, which didn't display properly:
Works, but doesn't show swatches:
TileList.addEventListener(Event.CHANGE, changeColor);
var colorBox:ColorTransform = new ColorTransform();
function changeColor(e:Event):void{
colorBox.color = tileList.selectedItem.data;
box_mc.transform.colorTransform = colorBox; }
Shows swatches, but doesn't work:
var aBoxes:Array = new Array(); var i:uint = 0;
var printColorHex:Array = new Array(0xfac9c2, 0xFF0000, 0x0000CC, 0x00CC00, 0xFFFF00);
var printColorNames:Array = new Array("R-01 Pale Coral", "Cranberry", "Sky", "Forest", "July");
var dpPrintColors:DataProvider = new DataProvider();
for(i=0; i < printColorHex.length; i++) {
aBoxes[i] = new MovieClip();
drawBox(aBoxes[i], printColorHex[i]); // draw box w next color in array
dpPrintColors.addItem( {label:printColorNames[i], source:aBoxes[i]} );
aTl.dataProvider = dpPrintColors;
function drawBox(box:MovieClip,color:uint):void {
box.graphics.beginFill(color, 1.0);
box.graphics.drawRect(0, 0, 140, 60);
box.graphics.endFill(); -
Unable to unistall application from software center
Hi,
I am unable to uninstall Chrome from Software Center. When i select Chrome and click uninstall, it doesn't seem to do anything.Check logs to get more details about issue
http://www.scconfigmgr.com/2012/08/15/applications-in-software-center-uninstall-with-removal-failed/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali -
How to hide installed application from Software Center 2012
Hello,
I would like to ask you whether it is possible in Software Center 2012 to remove the record of program that was installed successfully from application catalog.
Currently it stays visible in SC as "Available" constantly informing users with popup that there is new software available for installation. This may be disturbing behavior for users.
Technical specialist in our company would be very glad to know some workaround. Is there some xml file or registry on user computer that could be used to remove such record from Software Center 2012?
Thank you very much for any advice!Hi,
There is a related setting in Client Setting - Show notifications for new deployments.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Orphaned Applications in software center
I have seen this a few times but seems to be intermittent. I created a query based user collection. My test user account was part of that collection. I deployed an app to the collection. The user was able to see it in the app catalog
and install it successfully. The user then uninstalled the app successfully. The app stills shows in Software Center as available (which appears to be normal although I wish the behavior would be that it would disappear). But that's not the
issue. So I no longer wanted the user to be able to deploy this application that they previously installed and uninstalled. Since it is a query based collection which the user should be in, I added an exclude collection that just had the user account
in it which seemed to work fine. The exclusion collection caused my test user account to drop out of the collection. After a few minutes, the app dropped out of the app catalog which is good and what I expected. The problem here is
that the app still remains in Software Center and shows as available and the user can still continue to install and uninstall this app. I have forced user policy several times with no change and let it sit for a few hours with still no change. As
a test I then removed all membership from the collection so that it was completely empty. Still no change. I then deleted the collection and the deployment and still no change. I have also forced machine policy and application deployment
evaluation cycles and still no change. I have ensured that there are no other deployments of this app, it is not a dependent app of any other app either. So I am left with an app that I can still install/uninstall from software center with no existing
deployments of that app. Other times I have done similar and the app does disappear from Software Center after updating user policy. But definitely once or twice in the past I have seen this behavior as well. In the past I believe I removed
and re-installed the configmgr client to get rid of the orphaned apps. I have not done that yet this time in the hopes of troubleshooting further. Has anyone ran into anything like this?Thanks, but I am the person that originally posted that issue. This issue is similar but much worse. That one was just a nuisance in that the apps remain available in software center after you have performed an uninstall. But to workaround
that problem I would have to somehow get the user out of the collection that was targeted with the deployment and that usually got the app to drop out of software center. In this case however, the app remains even after deleting the collection and the
deployment. So this app is no longer deployed to anyone but the user with the app orphaned in software center can still install and uninstall it. I even cleared the cache on the user machine thinking that would at least cause it to fail to install
next time but the user was able to re-download content and install again. So to me this one is much more serious than the first one. I will have to file another case. But curious if anyone else has seen this and for now if anyone has a workaround
like perhaps finding the policy and deleting it or something that I can script. Just started poking through policy spy but have not gotten far yet. -
i have just reinstalled my mac os x, in fact yesterday, i have not been able to update my software or change anything at all, i try to do a software update and it is asking me for an administrators username and password that was not happening before, i enter the username and password i created and it comes back wrong, its driving me nuts, been to keychain but unable to figure it out, its asking for a system unlock and i have no clue what that is.
am desperate.Stick the 10.6 disk into the computer and reboot holding the c or option key down, select the disk to boot from.
In the installer menu is a Utiltiies menu and a password reset.
If you don't remmember the name, reboot the computer holding the command and s keys down
a black screen with white type appears, when it's finished, dbackspace any extra ssss you have made and then type
ls /Users
(that's Larry, Sam, space, slash, Users)
and press return, a list of user names on the machine appears
type exit and reboot and use the 10.6 disk to reset your password -
Clients cant download application from software center [ error : 0x87d00607 ]
I've got a small SCCM 2012 deployment with about 3 clients , these three clients cant download application available on software center!
i checked out my boundries and boundries group and they are well configured .
help plzi have just a subnet configuration in my boundary so there's no association against the site in AD
Houda
Subnet or IP ranges? Best to configure with IP ranges.
http://blog.configmgrftw.com/ip-subnet-boundaries-still-evil/
Cheers Paul | http://sccmentor.wordpress.com -
Webauth asking again for credntials
Hello Experts,
I am having an issue with webauth page.
I am using ISE as radius server and using sponsor account for guest account creation.
My Issue is: once I login with webauth i got internet connection but after few idle time (5-10min), I need to enter username and password again.
Can this problem can be solved??? I have guest acount for 1 year timepeariod and I dont want to enter crenditals again and again.
Is there any solution?
wlc- 2504, AP- 2602, ISE 1.1 version
ThanksHi,
As long as a client entry is not removed from the WLC, it should not have to re web-auth.
Session timeout is a hard stop, so yes you could limit the session timeout to 12 hours. The other problem is that the WLC will "remove" a client by default after 5 minutes of an AP not hearing from the client. So a client who is shut down, or in power-save (no wireless packets), will be deauthenticated after the idle timeout period.
The user idle timeout is when you shut down laptop, or move away, so no deauthenticate frame was sent the client just goes silent. The idle timeout defines how long the WLC waits before deleting the client entry when it's not hearing AT ALL a single frame from the client.
But still I feel this is not you want, you want permanent connection to guest users but I think it is not possible now.
Hope it helps.
Reagrds
Dont forget to rate helpful posts -
Once a mail has been sent, it cannot be repeated, in order to ask again for an answer
Having sent an e-mail I sometimes wait for an answer for a longer while so that I would like to repeat my question. That mail is stored in the "sent"-file. Clicking it, I can read it but not resend it, nor can I insert a leading line such as "resent on June 23...".
I manage that now using the forwarding button, however have to insert the address again.
In Microsoft Outlook "resend" is easily provided.Right click it, select "Edit as new".
-
Installing old software from previous Windows 8 installation? And installing new software.
Hello.
Two questions.
Can I re-install software from my previous Windows 8 installation onto Windows 10 Preview? All the files needed are in Windows.old. I have some software that was registered to me, and getting another copy will be kinda hard.
Also, when the final edition (i.e: not a technical preview) comes out, will any new software that I have installed onto the Technical Preview still be there?
Thanks.It depends on how you installing Windows 10, if you do custom install or clean install which means either format partition of your current Windows or install Windows and removing previous version of Windows which would create Windows.old, you have to reinstall
your applications and restore your data and you need product keys and installation files. However , if you do upgrade which is possible from Windows 8 to Windows 10, then you will have your programs and files in place and you don't need to reinstall them.
But note like previous upgrades (e.g. Windows 7 to Windows 8), you might have some compatibility problems and you might need to uninstall some programs and install newer version which you will know during upgrade process.
When final version of Windows been released, you might need to update or install latest version of some software or programs which are compatible with Windows 10 and latest software products should work on Windows 10. -
Firefox 26 do not ask for restart after extension install
I have upgraded Firefox to version 26. When I am installing XPI packgae and after installing of add-on, it is not asking for restart. There is no restart button.
I have to goto add-on extension manager and from there I see 'restart now' link.
Is some behavior changed from Firefox 26 onward? How to make add-on install work as previous, where it will ask for restart. Please suggest option.
Thank you,
Akash.Follow this link
https://support.mozilla.org/en-US/kb/find-and-install-add-ons-add-features-to-firefox?esab=a&s=restart+firefox+26+automatically+after+extension+installation&r=1&as=s#w_problems-with-installing-or-uninstalling-add-ons
It doesn't get restarted on its own.
Thank you. -
Requesting for installation guide to install ecc 6.0
Hi gurus,
I have recently installed windows server 2008 r2 in my dell system(4gb ram, I3 2.55 GHZ, 500 gb hard disck). now i want to install ecc 6.0 in my lap for webdyn pro, adobe forms and CRM practice.
To install ecc 6.0 in my lap what all files i need to download from srevice market place. i dont want ehp4. as i did read in other threads ehp4 will be slow on my system. i kindly request you to please guide me in downloading appropriate files.
and one last big dought in my mind. if i go for crm and ecc 6.0 whether my system can run both the things successfully. how much space is needed for this thing.
Please do reply..............> no one has answered my question's.
You question was answered by Lars just in the message before:
The installation is described in the installation guides
that you need to download from service.sap.com.
more precisely one could say: http://service.sap.com/instguides
Don't expect screenshots, don't expect this to be a "setup-next-next-finish"-task. You will need to read a lot of paper and notes (as we all do).
Markus
Maybe you are looking for
-
In the previous version of Firefox when I right clicked on a bookmark in the bookmark bar the IE Tab options would appear. They no longer do since I have moved to Version 4. It would be great to get this ability back.. Thanks
-
I updated iTunes and now my podcasts will not show. On the sidebar, it states I have 35 unplayed, but when I click on the podcast option, a "What's New" window opens up. Tv, movies and music - no problem. But I cannot manage my podcasts.
-
Hello, Created one condition type: ZVSB (VAT non-deductible) Condition class: D, Calculation type: A, Cond. category: N, Access sequence: MWST, item condition. In Tax calculation procedure: (T/code OBQ3) - TAXINN ZVSB condition type calculatio
-
I'm testing our checkout process and I had this error pop up. I had one item in my cart when checking out. The only weird thing with the order is that it was in the system at $0.00. I don't know if that may be the source of this problem. Any idea
-
I am in need of the recovery Disc for a Lenovo T430 (QH6-2349) that I've recently purchased. It comes with Win 7 Pro 32 bit, but I would like to run 64bit Windows on it without loosing the "Lenovo" Windows. So, it would help if someone with a similar