Unable to advertise software application via Software Center

I have an issue of advertising my software application via software center. I doesn't matter if I set it to deploy as Required or Available, the deployment just could not get to install to my targeted machine or appear in my Software Center. In the
deployment status, it also shows No Status even I have targeted since last week and the targeted machine is always connected.
I have viewed the execmgr.log, but could not find the package id in the log. Could it be stuck somewhere that could cause it unable to complete the process of advertising it to the targeted machine, whether it is via Required or Available deployment?
I am however able to deploy old/new the patch updates deployment and able to install the software package to my DP. However im still able to get OLD deployment of software apps or TS but not
NEW deployment of any software apps or TS since the last 2 weeks. I am also able to mplist and mpcert from the targeted machine to my MP, so meaning it could communicate to get policies.
Im stuck now. Any other logs in particular that could help me right now to determine the root cause?

There is a constant error of
1) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420076-DE4001C2-22DFAA8D from the Policy table
2) Failed to update policy DEP-DE420076-DE4001C2-22DFAA8D and policy assignment {ecadc449-d862-4ad9-b75e-252d753ced8f} based on package DE4001C2, program Install (TS DC_Demo) and offer D
3) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420081-DE4001C2-22DFAA8D from the Policy table
4) Failed to update policy DEP-DE420081-DE4001C2-22DFAA8D and policy assignment {43af1ebc-32b5-459b-8749-573a87df22b8} based on package DE4001C2, program Install (TS DC_Demo) and offer D
5) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420076-DE4001C2-01D4CDDC from the Policy table
6) Failed to update policy DEP-DE420076-DE4001C2-01D4CDDC and policy assignment {f4041e0f-da02-4c6e-8a25-62e95a123abb} based on package DE4001C2, program Install (TS HR_FI) and offer D
7) CPolicySource::UpdateSoftwarePolicy: Failed to retrieve version for policy DEP-DE420081-DE4001C2-01D4CDDC from the Policy table
8) Failed to update policy DEP-DE420081-DE4001C2-01D4CDDC and policy assignment {d7884252-9e8b-4854-b175-a0c797130930} based on package DE4001C2, program Install (TS HR_FI) and offer D
9) Failed to create policy and policy assignment based on package DE4003E6, program Install (TS) and offer DE420076
10) Failed to create policy and policy assignment based on package DE4003E7, program Install (TS) and offer DE420076
I don't understand why it keeps on saying "based on package DE4001C2". I don't have any package with this package ID.... Not sure why I am seeing this in my logs.

Similar Messages

  • Installing certain Applications via Software Restore...

    Hi All, I was wondering is there any freeware available over the web that allows me to select certain application I'd like to install into my Mac via the Software Restore disc?
    Many thanks

    Hello and welcome to Apple Discussions.
    To read up on using Software Restore disks, click this link:
    http://docs.info.apple.com/article.html?artnum=301408
    Also, anytime you Restore, whether just restoring one software or your entire hard drive, make sure and back up all your important files/data/images/audio first BEFORE doing anything. Also, run Disk Utility and Repair Permissions. And lastly, make sure to use the Software Updater to make sure you update to the most recent versions.
    Carolyn

  • Unable to run the application via DNS CName record.

    I have  Windows Server 2008R2 running an application that connects to a database via a DNS CNAME record. The application was working fine until after yesterday when it could no longer
    connect to the database. The database server is up and running without any issues. You have verified remote connectivity to the database server from your workstation.
    How would you troubleshoot the issue and what are the steps to resolve it?

    It might be that the application does not support using aliases for DNS resolution. You will need to contact your application developer/vendor for assistance.
    To make sure that DNS resolution works properly from the infrastructure level, you can simply use
    nslookup and make sure that the resolution is done properly.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Unable to unistall application from software center

    Hi,
    I am unable to uninstall Chrome from Software Center. When i select Chrome and click uninstall, it doesn't seem to do anything.

    Check logs to get more details about issue
    http://www.scconfigmgr.com/2012/08/15/applications-in-software-center-uninstall-with-removal-failed/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
    Technical | Twitter:
    Mai Ali

  • Receiving Error 550 when using Exchange via another software application.

    Here's a good one (and I hope I'm able to explain this correctly)....
    I work at a hospital where we have a gym facility that is open to employees and also to the public.  We use a client management system called Twin Oaks.  This Twin Oaks software has email functionality that uses an Exchange user account to send
    group emails out to clients (this avoids the front desk staffers from having to create email distro groups in Outlook to send out mass emails).
    I worked with the Twin Oaks support staff to get the email integration set up with our Exchange server (it was an easy process, entering the SMTP server name then a few other basic settings).
    Emailing through the Twin Oaks software works, but only to clients who have INTERNAL hospital email addresses.  The messages are failing to go out to any client that has an external email address (Error 550 states the address is unavailable).
    Twin Oaks' response to this is that we have some type of firewall that is preventing the delivery of these emails to external addresses.  This is not the case and I can't seem to find any reason that would prevent the mails from going out.  We
    can email external addresses direct from the generic account we set up for this purpose, but for some reason, the mails are not going when they are sent through Twin Oaks application.  
    We are using Exchange Server 2010.  I can't find any transport settings or policies that would prevent emails from going to external addresses and am stumped as to why this isn't working.  
    Has anyone else experienced these types of issues when using Exchange through another software application to send messages?
    Any responses would be greatly appreciated!

    Hi,
    Based on the description, you could send email to external addresses without the Twin Oaks software. However, with the Twin Oaks software, you couldn't send successfully.
    For this issue, I recommend you enable message tracking and check whether you could retrieve message tracking log entires when you send emails to external addresses through the Twin Oaks software.
    If you couldn't retrieve message these tracking log entires when you send emails to external addresses through the Twin Oaks software, it means that the Exchange server is OK and the crux of the problem is the Twin Oaks software.
    Here is an article about message tracking log for your reference.
    Get-MessageTrackingLog
    http://technet.microsoft.com/en-us/library/aa997573(v=exchg.141).aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Unable to make changes to your software

    Hi,
    We have an SCCM 2012 client (Vista pc) which was upgraded (SCCM 2007 => 2012 via client push).
    We deployed a task sequence with OSD Windows 7. This worked fine untill now.
    Suddenly we get the message "Unable to make changes to your software", None of the applications you tried to install began installation succesfully.
    There is no smsts.log since the tasksequence didn't even started.
    Please advise.
    J.
    Jan Hoedt

    Found the problem. On Vista as well wifi as standard nic are enabled. Although it should not happen, the wifi-address/mac is used to download content. When we added the wifi network as boundary, problem was solved.
    Jan Hoedt

  • Citrix XenApp Unable to Open Published Applications. Via UAG Trunk

    Good Morning,
    I'm trying to publish XenApp through a UAG trunk. When I click in the XenApp icon I am presented with the Citrix login page and am able to log in. However, if I try to open any application I am prompted to either open or save the ICA file and on clicking
    open I always get the following message, "Unable to launch your application. Contact your helpdesk with the following information: Cannot connect to XenApp server. There is no Citrix XenApp server configured on the specified address." If I log in
    to the UAG server I can connect to the Citrix server and run all applications without error. If I save the ICA file the contents are as expected and the correct server is listed.
    Forefront UAG is running a two node NLB array with SP4 and Citrix is published via an F5 load balancer.
    Any ideas out there?
    Thanks.

    hi patrick,
    this problem is not solvable on the serverside since this is a desktop integration problem. since you want to use excel as your editor you have to use excel's client side software.
    oracle drive purely addresses desktop integration and is not meant to be a server side component. it is a webdav client and for that only ensures that the communication between the client and the portal server has as much useful functionality as possible.
    the only other option that i see is downloading the document to the client, update it and copy it back up to the portal server, which is cumbersome.
    all webdav clients are client side software that is either shipped with the OS (MS webfolders) or needs to be installed on the client (oracle drive).
    you could check if there is software availble that is an excel plug-in for internet explorer which at the same time talks webdav to portal. not sure if this exists ?
    regards,
    christian

  • Location Software Application Setting

    What is kudo???
    I have the Location software application installed on my 5800 Expressmusic and want to use it to pinpoint a location using co-ordinates. The default settings are Northerly and Easterly. I want to use Northerly and Westerly settings but I am unable to change the default Easterly setting. Any ideas? :-(  PS very useful for Geocaching if it works!
    Solved!
    Go to Solution.

    Thanks for replying. I now have the solution as you can see from the thread.
    I do have another problem. I want to send emails via my 5800 using the email client that came with the phone originally (under MESSAGING). I can receive them but not send them and yet if I use the email client which I have downloaded from Nokia (icon @ sign) I can both send and receive ok. My provider is Virgin Mobile (T-Mobile). Any ideas?
    Chaulky

  • How do I prevent items from showing up under "Available Software" in the software center after they have been removed?

    I have some scenarios where I want to keep older or multiple versions of an application around in the Application Catalog website. The problem is when I deploy a script to remove one of these applications after removal it starts to appear under "Available
    Software" in the Software Center. Our users have noticed this and discovered that they can go there, select the application and reinstall it. I need to find a way to prevent this. Is there some sort of setting I can enable to prevent certain applications
    from showing up under "Available Software" but still have them listed in the Application Catalog Website? 

    I show in the SDK about properties passed to the Software Center that deal with Applications but nothing on how to interact with it directly in dealing with the Check box for "Show Optional Software". 
    You can always see if there is a captured regentry when you click it.  I don't know if this setting is wiped out when you close the SC.  If so you could create something to create the key to force the check box.  Sorry, maybe someone will
    have a better answer for you.
    http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com
    Thanks for responding again Matthew. Yeah I googled around and got nowhere. I did find a thread here that touched on it where Torsten Meringer responded and seemed to indicate that it could not be done. I find that hard to believe (where there's a will there’s
    a way right?). I did tag the Software Center with a registry watcher on my stet VM and tried unchecking that box. Got nothing so wherever the setting resides it does not appear to be in the registry. Very frustrating to have the solution staring me right in
    the face and being unable to do anything about it. Hopefully someone who has a working method will see this thread and respond. Until then I guess I’ll keep digging.
    Side note – I’ve worked in Oil and Gas now for 10 years. Awesome to have an admin from Schlumberger respond to my post. We energy people have to stick together right? ;)

  • I am unable to install the groupware synchronization software in CRM UI

    Hi Expert,
    I am unable to install the groupware synchronization software in CRM UI.Please find the attached image in this install button is disable.my system have Microsoft outlook 2013 and Microsoft visual studio tools.
    please check once and let me know what is problem.
    Thanks in advance.
    Thanks
    Jana J

    Hi Gervase,
    I have downloaded latest one already.
    For this  i am following below step to install
    Go to transaction SE80 and choose 'BSP Application'.
    Search for 'CRMCMP_GW_WC'.
    Go to the folder MIMEs and right click on the 'setup.exe' (or setup.msi, if you are using the old series).
    Choose the option 'Upload/Download' and then 'Upload and Replace'.
    In the pop-up choose the path to latest setup.exe file.
    But its running long time.
    please give me solution for this.
    Thanks
    J Jana

  • HT4906 Aperture 3.1.2 is not updating to 3.2 via software update

    my Aperture 3.1.2 is not updating via software update.  How do I update to 3.2?

    If you purchased Aperture outside of the Mac App Store, then be 100% sure it is located in your Applications folder.  By far the most common source of problems is if you create a subfolder inside Applications (i.e "Photo Applications") and move Aperture there.  Software Update won't see it then.
    If you purchased Aperture via the Mac App Store, then use the MAS to update Aperture, as Software Update won't update stuff purchased through the MAS.

  • Unable to make changes to your software when executing software in SC

    I often got below error when trying to execute software via SC. The package is successfully distributed to my DP and I can confirm that the client machine trying to execute the software is within the managed boundaries configured in the console.
    I don't know what else that I need to look at to troubleshoot this. What are the log files to look at? execmgr?

    Check the boundaries the client will be in and make sure it's reporting back ok to the 2012 site
    For more info. check below link
    https://social.technet.microsoft.com/Forums/en-US/b77f7235-32d3-4c21-a4a3-a7e336646e73/unable-to-make-changes-to-your-software?forum=configmanagersecurity
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • Unable to restore 4s after updating software

    unable to restore 4s after updating software , the wake up screen is nonresponsive

    Hi D.Cohen
    Thanks 4 ur attention , I did exactly what u told several times , the restoring ( updating ) starting , after some times , there is a message appears to ask for allowing pc to access iphone data , followed by another one telling to give  answer via iphone ( which is still unresponsive ).
    After downloading completed , I got another message , telling that there is an error occurred and asking to try again . ( each trial take around  1-2 hours )
    pls advise
    0

  • N80 loss of software/application manager

    Hi I have only just realised that my currency converter is not working properly, the options of currency are home and foreign. I have also noticed that my application manager no longer exists. When I go to tools, application manager and try to open, I get a blank blue screen which then goes back to the main phone screen. The phone is on Orange and Ive had it from about July. I have updated the software once via Nokia and the PC but the phone was okay after this update. Can anyone please help. Thanks, Helen

    But first, try the firmware upgrade - the lost of personal stuff is total, so do the backup first.

  • Cloning Server OS Raid0 to external Raid0(mac software raid) via CCC

    Have OS X Server 10.5.8 on a couple of Seagates (2 X 1TB) Raid 0(striped)
    Have 2 LaCie 1TB externals firewired to server configured as Raid 0 (striped)
    Desire to make 'bootable' clone, for quick restore should the internal os volume fail.
    Will select 'Install Mac OS 9 Disk Drivers' upon formatting/raid setup as it should be..right?
    Using Carbon Copy Cloner should do the job, correct? Any experience relative to this by anyone?
    Look forward to any opinion..thanks

    Thank you!
    Kappy     Nov 24, 2014 3:01 PM 
      Re: Mac Pro's (early 2008) Back up plan towards a possible OS upgrade to Yosemite  in response to Juan Huerta      
    All new drives need to be partitioned GUID and formatted Mac OS Extended, Journaled before they can be used.
    OK, is that an option I'll be prompted to by the OS or do I have to "tell" that to...Disk Utilities (?)
    If cloning is your purpose then use Disk Utility's Restore option. It will clone the drives and their Recovery HD partitions automatically.
    I didn't know that Disk Utility had an option for cloning a bootable drive...is it better than CCC? (I have used neither one) I really would like to save $40 and avoid downloading additional software/applications...please if you don't mind...what option would that be once I click on "Disk Utility"? If you know of a good link or reliable article on the topic that will work for me too.
    Test a clone be trying to boot the computer from it.
    Any bootable drive in any bay can be used to boot the computer. Use Startup Drive preferences to set the desired boot volume.
    Erase the target and try again.
    But if the computer fails to start because I didn't create a good copy, how do I go back? Keyboard shortcuts? I keep reading that a wired keyboard must be used...and that's scary. If that's true, could I hook up any of my Windows based keyboards via USB?
    Erase the drive and install OS X. You cannot use any software installed by the prior owner that was purchased via the App Store including OS X. You must start from scratch. (this actually is 5B rather than item 6.)
    Well, he created an Admin account for me and I have been handling updates and everything with the new password he created for me. I wonder if I could access the Apple Store with my ID though...it's all under my name in that computer though, so I figure that at the Apple Store I'd just enter my ID...I guess, I have not tried that yet
    Yes.

Maybe you are looking for