Application is failed. due to some reason

Please find below the error shown in tomcat logs. Please note that it doesn't display the name of the class, that it is not able to find. Generally, along with java.lang.NoClassDefFoundError , the class that it is not able to find is also shown. This error comes while running same application under tomcat at different levels. One application is under webapps directly and copy of this application is kept under 1.0 folder. This error comes only after sometime of starting the tomcat. On restarting the tomcat, the error doesn't occur again and everything is fine. It pops up again after sometime. This behaviour is seen on UNIX only. This setup works well on window.
At two different levels folders seems to be like this:
Apachetomcat5.5.23-?webapps------>applicationname
----->1.0
Under 1.0---->applicationname(samename and code)
java.lang.NoClassDefFoundError
com.goodyear.common.config.chart.ChartConfigParser.parse(ChartConfigParser.java:75)
com.goodyear.common.util.PropertyLoader.updateArrayMap(PropertyLoader.java:245)
com.goodyear.common.util.PropertyLoader.loadArrayMap(PropertyLoader.java:215)
com.goodyear.common.util.PropertyLoader.loadArrayMap(PropertyLoader.java:141)
com.goodyear.common.registry.AppLookUpFileDao.load(AppLookUpFileDao.java:28)
com.goodyear.common.registry.AppLookUpDao.getMap(AppLookUpDao.java:46)
com.goodyear.jmcs.helper.MCSHelper.<init>(MCSHelper.java:99)
com.goodyear.mms.handlers.RPDHandler.getQSResponse(RPDHandler.java:78)
com.goodyear.mms.handlers.RPDHandler.getResultAsString(RPDHandler.java:292)
com.goodyear.superapp.servlets.QueryApp.processRequest(QueryApp.java:143)
com.goodyear.superapp.servlets.QueryApp.doPost(QueryApp.java:183)
javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

chinnijagadeesh keeps crossposting this. due to some reason.
[http://forums.sun.com/thread.jspa?threadID=5334550]
[http://forums.sun.com/thread.jspa?threadID=5334813]

Similar Messages

"Wireless association failed due to unknown reason"

I am running Vista home (manufacture installed on new laptop) and am trying to connect to internet through new router WRT150N. The network is created fine (my other laptop can access it) excellent signal etc, but I keep getting the message "Wireless association failed due to unknown reason". I have tried every different security setting including no security at all and still cannot connect. I am, however, able to connect to the router with a wired connection. I would prefer to not have to chuck this thing out the window but it is becoming increasingly likely.
Thanks for your help.

hi there;
considering the scenario you've got on your network, that there are other wireless pc connecting to the router, then there is nothing wrong with the router itself. all the settings on it maybe correct. just to isolate the problem try to contact microsoft so as to clarify with them on securities and wireless settings of the vista laptop you've got there, so as you won't get frustrated thinking about your immediate problem.
i have a friend who uses the same brand and model # as yourself, and he does not have any issues with his win vista connecting to the router.
give microsoft a call, just to clarify things.
thanks.

Generate PDF failed due to unknown reason

I have updated Bridge
I have resetted prefs.
It happens in both CS4 and CS5
any ideas?
Mac 10.6.8

and its odd it happens in the CS4 also
That is indeed the weird thing but to me this seems also the reason to first look at you OS system itself because it is almost impossible that both CS4 and CS5 have same fault behavior in one day I would think.
Make sure you have sufficient disk space and also double check if you have read and write permissions for the disk and folder you are trying to save the PDF files to (choose folder in finder and the hit cmd + i or get info from menu file) and at the bottom of the window check the permission settings.
Also run Apple Disk Utility to check and repair permissions.

Master Data Process chains failing due to special charecters?

hi experts,
we have done all the master data(FI,SD,LO,QM,PM,MM,PP,PS) and created process chains and transported into production system.
when we run the process chains we are facing lot of issues regarding special charecters.
for example. 0MAT_VEND_ATTR Data source.
MATERIAL VENDOR (field - IDNLF).
'UDGÅET
&''UDGÅR
&''UDGÅET
&''36/5599/LED./FÆLLES
&''SØTRANSPORT &
those are the special charecters are coming when i try to execute through RSKC the above Material Vendors, its giving different special chars for different MATERIAL VENDORS like below.
FÆLLESSØTRANSPORT
04/5160/FORSØGSAFD.
(5150)FORSØGSAFD.
like that there are about 15 master data chains are failing.
due to that reason the below transcation chars are not executing.
please suggest me is there any routine or is there any procedure to take care of unpredicted special charecters loading successfully into BW.
regards
venuscm

I don't think its a global setting problem.
Permit the char in RSKC...
Check with the functional team why they are getting Special char values in the loads. ask them to rectify the special char so that you can extract the same to BW side.
go through the blog links provided earlier in my post...
Check the below link which might be of some use to you,..
/people/jyothi.velpula/blog/2010/12/23/removing-invalid-characters-using-field-routine
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
Edited by: prashanthk on Jan 3, 2011 5:35 PM

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

Can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable

can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

Depends on what you had
If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
If you had any version of iPhoto '11 then you can install for free from the App store
If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
LN

I have been trying to update my cc info and for some reason it has kept saying that the cc info does not match with the bank so the transcation failed every time I was trying to download something even when it's free but my cc got charged $1.- each time.

I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?

Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.

I just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!

i just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy New Year

HT201210 My iphone 4s failed to update. What are some reasons why this might happen?

My IPhone 4S failed to update. Anyone know what are some reasons this might have happened?

Download and save firmware from here
iPhone4,1_6.1.3_10B329_Restore.ipsw
Connect iPhone in iTunes. Option+Restore (Mac) Shift+Restore (PC) pointing to saved .IPSW file.

Some Adobe CC application installation failed.

Most of Adobe CC application was installed well, but some application(bridge or plug-in etc) installation failed.
And it says "Installation Failed. The download appears corrupted. Please try again after a few minutes.(-60)"
What can I do for this ?

if you can use a more stable (ie, non-wireless) connection, try that.
otherwise, if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/adobe-cc-direct-download-links.html
and activate with your adobe id.
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

For some reason, when my Macbook Pro starts up, all of the MS Office applications open. This was not happening when I first purchased the laptop, and I never added these apps to the startup menu. How do I remove these apps from startup?

For some reason, when my Macbook Pro starts up now, all of the MS Office applications open. This was not happening when I first purchased the laptop, and I never added these apps to the startup menu. How do I remove these apps from startup?

By default Mac apps do not close when you close the window you were working in. Unlike in Windows when you click the top right X icon in any program is closes the window and the program shuts down. On Mac OS X clicking the X in the top left hand corner only closes that windows and leave the program running in the background. If they are left open and you reboot they will restart with the system and load a window for them.

HT1926 My itunes won't open because it says "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem" Can someone help? I don't want to delete it altogether due to needing the phone backup

I was given notification to upload the latest version of itunes recently, so I clicked installed. However it has since corrupted my itunes and I get the error message:
"This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem".
In poor timing, I have also accidently damaged my phone and have a new one to restore it to an old back up.
It is because of this I am reluctant to completely delete itunes off my computer and start again for fear of losing my back ups.
Is there another way to fix iTunes so I can open it again?
Thanks

Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!

Hello I just bought the usb super drive and for some reason when I put the disc in and download the application it won't show.Just a bunch of words will show up.

Hello I just bought the USB super drive for the mac book pro and for some reason when I put the disc in and I download the content and for some reason when I put the aplication just a bunch of random words come out,not the content the disc brings.

Ok, I hope I'm not steering you in the wrong direction, but I've just found this on the support site for the software.
Interchange Interactive Whiteboard Software System Requirements
Please note: These discs work on Windows PCs only.
Minimum System Requirements
Pentium II 300 MHz processor
Windows 98 / ME / 2000 / XP / Vista
64 MB RAM
50 MB free disk space if not installing onto hard disk
1.44 GB free disk space if installing (recommended)
4x CD-ROM drive
800 x 600 screen resolution displaying 16-bit color
Sound Blaster compatible sound card
Mouse or other pointing device
Headphones or speakers

Application is failed. due to some reason

Similar Messages

Maybe you are looking for