Application Switcher Not Working correctly

Selecting a program opens desired program properly(as displayed in Menu Bar) but will not open the corresponding program's open windows until selecting program in a Mission Control desktop. After selecting the desktop to which the program is attached and clicking on the program then the open windows will be properly displayed.
Application Switcher seems to work correctly and open the corresponding windows within a desktop if programs are attached to a particular desktop but will not open the corresponding open windows if the programs are located on different desktops - i.e. Mail Windows will not open if Safari windows are displayed because programs are on two different desktops.

Cool. Learn a new trick every day... It works on my English keyboard (with the Q).
Maybe the "oddity" has been fixed and it is no longer A on the French keyboard, but Q, as it should be.

Similar Messages

  • Application switcher not working as expected

    I am using the French localisation of Leopard. Using Application switcher (ie Cmd-Tab) I was able on Tiger to quit a running app by pressing A (an oddity due to the AZERTY / QWERTY differences). This does not work any more and I cannot quit an application from Application switcher. Any advice?

    Cool. Learn a new trick every day... It works on my English keyboard (with the Q).
    Maybe the "oddity" has been fixed and it is no longer A on the French keyboard, but Q, as it should be.

  • Application Switching not working in Spaces

    I'm having some trouble with Spaces and Application switching. Randomly the feature that switches the space to the right Application when you click on the dock stops working. The menu bar will change to the right application but the window and space will stay the same. Clicking the Window menu and selecting the window you want to go to doesn't work either. This problem also persists if you are in another Application like Safari and another application is behind it. You click the application in the dock and the menu bar changes, but Safari (or whatever program you were in before) stays in the front. The only way to switch is to manually click the spaces button on the dock and select the window you want which can get really annoying. A computer restart fixes the problem but I don't like having to restart my computer every other day or so.

    Well, my mouse issue turned out to be a Logitech Control Center/ Leopard issue. It was resolved with an update from Logitech but Spaces is still buggin' hard. When I try to switch spaces using Spaces this is what happens:
    I'm in Mail (space 3) and I wish to switch to Safari (space 1)
    I open spaces, click on space one and things become slow-motion the menu bar switches to Safari but the window switches to iTunes (space 2)
    This stops with a restart but eventually it starts happening again. I switch fine if I click the application icon in the dock but not if I use Spaces.
    Irrelevant of this bug but another recent freakout occurred when iTunes stopped dragging and dropping so I restarted. I was greeted with a hang on the grey screen with the black wheel for several hours. I eventually got it to power down again. I then pulled the power cord from the back, reconnected it and it restarted. All was fine until the return of the SpaceBug a few minutes ago.

  • Keyboard shortcuts to Dashboard, Application Switch not working

    I think other people are having a related version of this problem! After a certain period of time after starting or restarting the computer (perhaps whenafter the computer goes to sleep?) the keyboard shortcuts for Tiger, F9, F10, F11, and F12 don't work, and neither does Cmd + Tab to switch between applications. What is going on?

    I've not a solution, but for what it's worth I have a TiPB, a MacBook Pro, and two Quicksilvers running Tiger and have not experienced your problem. Not to suggest the problem doesn't exist, but perhaps it's related to something specific with your computer. You might try booting into safe mode to see if the problem ceases. If it does, then it's related to something safe mode disables. Another thing you can try is to create a new test user, then log out of your normal account and log into the test account. If the problem disappears, then it may be related to a bad preference file or something running in you normal account that isn't in the test account. It could also be a problem related to a corrupted cache file. Use one of the several utilities around for cleaning cache files.
    If none of the above are successful, consider doing an Archive and Install to reinstall a fresh copy of Tiger.

  • Application switching not working properly

    Today something strange started happening. When I try to switch to an open application, using Command-TAB or even clicking on the icon in the dock, instead of the application coming to the front, only the menu bar for that application comes to the front. When I click a second time on the dock icon, the switch completes, and the window comes to the front. But when using Command-TAB it's just left there. I can bring the window to the front, e.g. by doing a keyboard command (e.g. Command-L in Chrome to get into the address bar) but I can't just switch with one move from one window to another. This has changed today, up until now it's been fine. It changed around the same time I had a weird file corruption issue in MS Word; I wonder whether they are related? Whether perhaps it's to do with disk corruption. Anyway if you've had a similar problem let me know, I'd be interested to hear any suggestions for how to fix it (e.g. is there a way to flush preference files, and reset? I'll see whether it happens in a new user account).
    Cheers
    Seth

    Heya Seth- I just got this wrapped up with a senior specialist; here's what we did.
    Oh, little background - this happened to me too seemingly out of the blue BUT coinciding with some corruption that an Erase & Install hopefully took care of.... it was after the E & I that this began to happen.
    Shut Down
    Holding shift key & Power On
         must hold the Shift key until a progress bar appears (can release the Power button immediately)
    Time will pass
    Images will show up much slower (this slows down the Quartz filters...?)
    Open up apps.  Now try switching..... 
         it will be slow but keep your eye on the Menu bar. 
    Working (mine did)
    It's a log-in item then.
    Restart - this will be sloooooooow.
    Back up, Sys Pref - Users & Accounts - log-in items... I took out Growlhelper. 
    Worked like a charm.
    Hope this helps
    Cheers,
    cs

  • I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

    I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

    Hello,
    In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
    However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
    '''about:config'''
    # In the address bar, type "about:config" (with no quotes), and press Enter.
    # Click "I'll be careful, I promise"
    # In the search bar, search for "javascript.enabled" (with no quotes).
    # Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
    To Re-enable JavaScript, repeat these steps.
    '''Add-ons'''
    You can alternatively install an add-on that lets you disable JavaScript, such as
    *[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
    *[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
    Thank you and I hope this helps!

  • Email pushing not working correctly for office email - 3 seperate devices/carriers

    We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
    I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
    I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
    Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
    User 4 is on the older nextel blackberry push to talk, and is not on outlook. 
    We do not have an exchange server. Our emails were all set up through our devices.
    Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
    Thank you in advance for any suggestions.
    Caitlin Talbot 

    Potential solution for windows for a side-by-side install. This works for me.
    To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
    The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
    I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
    + Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
    C:\Program Files\Mozilla Firefox\firefox.exe
    C:\Program Files\Mozilla Firefox 4\firefox.exe
    + Open profile manager. Start > Run : firefox.exe -ProfileManager
    + In profile manager create Two Profiles.
    firefox3.6
    firefox4
    + In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
    + Create two windows shortcuts.
    * General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
    * General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
    That's it. Links from external programs should now open in your default browser.
    Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

  • Sonata font on MacOS - not working correctly

    Hi,
    I just downloaded and installed the Sonata Standard OpenType file via FontBook in MacOS 10.9.2. So far the font is not working correctly in either MS Word or Apple Keynote -- I get standard qwerty letters rather than musical notation. Anyone ideas on how to fix/troubleshoot?
    Thanks!

    Hello RKmark,
    Thank you for going through the process of using those custom keyboard layouts. It was my pleasure to work on those some years ago.
    There is a reason why the placement of some characters on those custom layouts seems arbitrary: They were intended to replace the experience a user would have when using the same PostScript font, which was directly mapped to the characters available on the keyboard. Of course they could be re-arranged today – but that would mean opening a whole different project; and would probably question some of the semantics within Sonata.
    Back to your problem:
    I just tested the keyboard layout for Sonata, together with the Sonata OTF in InDesign, and I did not find any problems.
    Of course this does not help you. So let me just describe what I did:
    I copied the OTF file, to ~/Library/Fonts
    I copied SonataStd.keylayout to ~/Library/Keyboard Layouts
    Admittedly, in OSX Mavericks it is a bit more complicated to install a custom keyboard layout:
    In System Preferences, go to Keyboard and Input Sources.
    Click the + button at the bottom left, scroll down the list and select “Others”.
    In the list to the right, you will find a “SonataStd” keyboard layout, it has a grey icon. Click Add.
    After adding this layout, you will be taken back on the Input Sources screen. Check the box next to Show Input in menu in menu bar if it is not yet active.
    Back in InDesign, create a new text box, select SonataStd, and choose the SonataStd keyboard layout from the menu bar (marked by the flag of the country representing your keyboard).
    Now you can begin typing. I could type the sixteenth-note-rest on a US keyboard with alt-x.
    However, one thing I have observed:
    If you have set any custom keyboard shortcuts in InDesign that are using the alt-key; they might get in the way of typing some of the symbols.
    Which of the available symbols in Sonata are you missing in the custom keyboard layout? I tested them all, and could type everything.
    What sometimes happens is that the keyboard layout will switch back to default (US in my case), which then looks like the Sonata keyboard layout is not working.
    My personal opinion on this: The keyboard layouts are a nice idea for making glyphs accessible to users that don’t have a glyph palette, but they can be very confusing. They will interfere with the normal usage of the application and OS, since standard keyboard shortcuts will no longer work – simply because they rely on the standard keyboard layout of your system.
    Personally, I would use the glyph palette in most cases, simply because switching keyboard layouts back and fort would get to tedious for me.
    I hope this helps, let me know if you have any further questions.

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • 1st Gen iPod touch not working correctly?

    I have a 1st generation 8GB iPod Touch. It's not working correctly.
    My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
    http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
    (Highlight the image to see it better.)
    This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
    But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
    I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
    My iPod is less than a year old. Can you help?

    Vipershark,
    I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
    The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
    Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
    Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
    Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

  • Function keys are not working correctly

    I've been looking all over the various threads and I can't find an answer that solves my problem.
    Here are the details:
    I bought the computer in the U.S. where I live.
    I have a iMac 2.4GHz intel Core 2 Duo  EMC 2133 with a 20" screen. Bought it new in February 2008.
    I have Mac OS X 10.5.8  (I am waiting for my order for OS Snow Leopard to come in!!)
    I have been using a wireless mouse and Keyboard (Love not having cords!)
    Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
    I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
    I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
    Here are the problems:
    Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows. 
    Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
    I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
    I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
    I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
    A couple more important or interesting facts:
    Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
    I have restarted the computer.
    One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
    When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
    I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
    Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • Program not working correctly-Help!

    class Sort
         /* method takes an array of integers as an input,
         * and returns a copy with the element values sorted
         * by select method.
         int[] selectSort(int[] input)
              /*declare variables to be used in array */
              int x, y, max, temp;
              int[] select = new int[input.length];
              /*This loop reads the entire array */
              for(x = input.length - 1; x>0; x--)
                   max = 0;
                   /*This loop checks to see if any number is
                   lower possible greatest number /
                   for(y = 0; y <= x; y++)
                   {//Returns number if lowest number
                        if(input[y] > input[max])
                             max = y;
                        }//end of if statement
                   }//end of inner loop
                   /*Switches the values */
                        temp = input[x];
                        select[x] = input[max];
                        select[max] = temp;
              }//end of outer loop
              return select;          
         } //end of selectSort()
         /* method takes an array of integers as an input,
         * and returns a copy with the element values sorted
         * by bubble method.
         int[] bubbleSort(int[] input)
              int[] bubble = new int[input.length];
              for (int x = 1; x < input.length; x++)
                   for (int y = 0; y < input.length - 1; y++)
                        if (input[y] > input[y+1])
                             int temp = input[y];
                             bubble[y] = input[y+1];
                             bubble[y+1] = temp;
              return bubble;
         } //end of bubbleSort
    **********************Test Class**********************
    class TestSort
         public static void main(String[] args)
              /* count variable used as loop counter when
              * result table display is generated
              int count;
              /* variable for object of class Sort */
              Sort x;
              /* create object of class GroupEx2 */
              x = new Sort();
              /* create a source array of integer elements */
    int[] y = new int[5];
    /* assign values to array elements to be sorted     */     
              y[0] = 8;
              y[1] = 5;
              y[2] = 3;
              y[3] = 9;
              y[4] = 1;
              /* create variable for target of select sort array */
              int[] ss;
              /* create variable for target bubble sort array */
              int[] bs;
              /* call method to return an array with element values select sorted*/
              ss = x.selectSort(y);
              /* call method to return an array with element values bubble sorted*/
              bs = x.bubbleSort(y);          
              /* display original and sorted arrays in three columns*/
              System.out.print("Input Array" + "\t");
              System.out.print("Select Sort" + "\t");
              System.out.println("Bubble Sort");
              for (count = 0; count < y.length; count++)
                   /* Column 1: original array */
                   System.out.print("input[" + count + "] = " + y[count]);
                   /* tab between columns 1 and 2 */
                   System.out.print("\t");
                   /* Column 2: select sorted array */
                   System.out.print("select[" + count + "] = " + ss[count]);
                   /* tab between columns */
                   System.out.print("\t");
                   /* Column 3: bubble sorted array */
                   System.out.println("bubble[" + count + "] = " + bs[count]);
              } // end of display for loop
         } // end of main()
    } // end of class TestSort

    Thanks for the Bash! I'm surprised you had the time
    for it.Go back and look at your original post. A whole bunch of code, and the only description of the problem is "not working correctly." Do you honestly think that's a reasonable way to ask for help? Do you go to the doctor and say, "I'm sick" and then just wait for him to cure you? Do you take your care to the mechanic and say only, "It's broke"?
    Look, this is your problem and it's your responsibility to fix it. There are people here who are happy to help you, but it's up to you to provide a reasonable statement of what's wrong, what you've tried, what you don't understand. For instance:
    Does it compile? If not, post the complete error message.
    Does it run, but throw an exception? If so, post the stack trace.
    Does it not throw an exception, but not behave the way you expect? Then describe the expected beavior and the observed behavior.
    Do you really need to be told this stuff? It seems like common sense that when you're asking people to spend their time helping you, you should give them the information they need to be able to do so.

  • Sleep not working correctly

    Since updating my Late 2010 iMac to Moutain Lion the sleep function does not work correctly. They system keep waking up for no reason. The monitor comes comes day or night. I cannot figure out a fix or work around. Any ideas?

    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
     Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • LoginFilter not working correctly

    My Login filter is behaving very strangely. Here is the relevant code from the filter.
    if (o != null
                    || (url != null && (url.indexOf(LOGIN_URL) > 0
                            || url.indexOf(LOGIN_FORM_URL) > 0
                            || url.indexOf(EXTERNAL_LOGIN_URL) > 0
                            || url.indexOf(EXTERNAL_LOGIN_FORM_URL) > 0
                            || url.indexOf("images") > 0 || url.indexOf(services) > 0))) {
                chain.doFilter(request, response);
                return;The problem is we are trying to allow an external application to log into mine. The external application generates a link with an /externalLogin.do as the href. It steps into the above code and the indexOf() correctly finds it and the chain.doFilter is executed. But it never makes it to the externalLoginAction.java.
    If I copy the link and put it on my Login.jsp page and click it, it makes it to the chain.doFilter the same but then continues on to the externalLoginAction.java.
    So it look like the chain.doFilter is not working correctly if it is not comming from the same context?
    Anyone have any ideas?

    stupid stupid stupid.
    The first url was passing userName and password in the URL the second somehow got changed to userId... so struts was kicking it back.. just changed my struts config to not validate the external login form.

  • The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

    I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

    HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
    I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
    As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
    For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

Maybe you are looking for