The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

Similar Messages

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

I have two kinds of songs. one kind is buying from itune store, and the other kind is burning from CD. i got a new 5s, but it only shows the songs that i buy in itune but not the one that from the cds

i have two kinds of songs. one kind is buying from itune store, and the other kind is burning from CD. i got a new 5s, but it only shows the songs that i buy in itune but not the one that from the cds

Are the ones from the CD's on iTunes? You may just have to sync them over to the phone.

Camera faulty on iphone I have taken it to apple store but because they have already replaced it within the last 12 months for something else they said they can't do anything even though I have paid for apple care. What are my rights ?

Camera faulty on iphone I have taken it to apple store but because they have already replaced it within the last 12 months for something else they said they can't do anything even though I have paid for apple care. What are my rights ?

Contact AppleCare

Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do we fix?

Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systen services, How do we fix this?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Not working correctly, not connecting to ford sync since 3.1.2

I have a first gen ipod touch and ever since I downloaded 3.1.2, i get a messed up screen sometimes while playing music and my ipod will not connect to my sync in my edge anymore. any tips?

Apparently this is a problem with the iPhone 3.1 OS not working with Ford Sync. I have a Ford Fusion and I have had problems ever since updating my iPhone to 3.0.
From Ford:
If your device has been updated to Apple firmware version 3.1 (or greater), then you will experience an INDEXING concern which may limit functionality of the device with SYNC, including longer indexing times (e.g., 30 minutes). Note: Earlier versions of the iPhone firmware are not affected. The Ford SYNC Team is aware and has been in communication with the Apple team regarding the concern. We will post an updated response once more information is known. We appreciate your patience and would like to offer the following recommendations for continued usage of SYNC and your device:
-Use the AutoPlay feature. SYNC will still playback content on the device that is on the "Now Playing" list of the device. Media control will be limited to the Play, Pause, Next and Previous Track.
-If the device supports Bluetooth Audio, connect to the device with SYNC BT Audio/Media Stream. Media control will be limited to Play, Pause, but can also be controlled directly on the device.
-Use the Line In input to connect to the device headphone audio jack. The media will need to be controlled on the device directly.
-Transfer unprotected contents to a USB flash drive. SYNC supports playback with full media control of iTunes formatted unprotected media.
-Allow some additional time for the device to index.
If you have any additional questions, you may also contact our SYNC Support team via chat, e-mail, or phone. Thanks.
Source:
http://boards.synccommunity.com/n/pfx/forum.aspx?tsn=1&nav=messages&webtag=fords yncmb&tid=1987

Activity Monitor not working correctly / not listing processes

When I open Activity Monitor, it does not display a list of processes. The CPU usage works in the bottom of the window as does the disk usage. None of the other graphs display any graphing/data.
I have rebooted, relaunched AM and I selected "all processes" but it still doesn't show processes.
I used the terminal command "top" and can see processes in the terminal window.
thanks for any assistance,
Harold
imac 2.8 dual core/24"/2gb/os10.5.5

Thanks for the quick reply. I couldn't find the activity monitor preferences file you specified, in the Preferences directory. Here's what I've done: I rebooted from an older backup image on my external drive that I made using superduper. The activity monitor app worked from this disk image. I copied the AM app into my current drive, where it showed as a copy.
I rebooted, and attempted to use this copy. It wouldn't let me due to file permissions problems of some sort. I opened the current version of AM and now it works.
I'm not sure what fixed the problem, but Activity Monitory now seems to be working OK.
thanks,
Harold

Ipod not working correctly, not frozen, nothing on it.

My ipod was connected to this ipod dock and all of the things on my ipod were completely erased, pictures, songs, everything. Since then it has been not working properly. When i try to update my ipod i wont let me. iTunes keeps giving me this message that says that i have to restore my ipod back to factory settings. I dont know how to do that. The ipod shows up on my computer desktop but not in Itunes. Also when i connect it to the computer the "do not dissconect" sign shows and does not go away.
also i was wondering does apple have an Email where I could Email them abut my ipod trouble or do i have to call the number?
what do i do? thankyou so much for taking the time to help me out.

Check out these troubleshooting guides.
Restoring your iPod.
iPod does not appear in iTunes (Mac).
If you have your iPod set to automatically transfer songs, right click on the iPod in iTunes, select options and if you have a check mark in the box marked “enable disk use”, remove it and your iPod should automatically disconnect after it’s finished transferring music. If it's set for manual transfer of songs, then you have to manually disconnect the iPod. You can just right click on it and select eject, or just drag it to the trash.
There is no email for tech support, only telephone support. Unless you have AppleCare, it's only one support issue that's free, and within the first 90 days of purchase.
This explains.
Complimentary support.
Mac Mini Super Drive; 1GB RAM; 20 Cinema Display; Airport Extreme; Maxtor 250GB ext hd Mac OS X (10.4.3) iPod 60GB (video); iPod 60GB (colour); 4GB nano.

Freebusy lookups via OWA not working correctly (notes coexistence)

Hi,
We're performing a migration from notes to exchange 2013, and are currently using contacts for the resource mailboxes that are still in notes.
When looking up freebusy information via outlook, all is ok, but when we query the rooms (contacts) via OWA, we get the status unavailable.
It looks like a timeout, since querying the freebusy is being performed correctly (quest coex freebusy server).
If I'm correct there was a timeout that can be configured for crossforest ews lookups in earlier exchange versions.
Is this still the case in Exchange 2013 CU3? And if so, where can I configure it?

Hi,
I recommend that you refer to the following methods to troubleshoot the issue:
1.Please run EXRCA to check the availability information.
https://testconnectivity.microsoft.com/
2.Exchange Web Services is used to retrieve the availability information, you can use Internet Explorer to verify that we have access to the Highlighted URL from below:
In addition, here is a similar thread for your reference:
Booking room shows "No Information" Status in OWA
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

SUM function not working correctly (not a rounding issue)

OK.
So in the E-column, I have a list of statistics going from E4 through E11. E12 is supposed to give the sum of the preceding numbers within that range.
         E
4     34000
5      7000
6      7000
7    30500
8      7000
9      3000
10          0
11    1500
The sum of these numbers should appear in the next row, E12, where I have the formula: "SUM E4:E11". However, whereas E12 should be giving me $91,000, it's instead giving me $57000. There's nothing that I can see that is wrong with my formula. If I modify one of the cell amounts, the 57000 will change by the amount I changed the cell. But there's no reason on earth it should be giving me 57000. I thought maybe there is an issue with how large a cell number can be, but if I change the 0 to a 1 in E10, it outputs 57001 to E12.

I cannot confirm your problem.
When I add: "34000+7000+7000+30500+7000+3000+1500" in the spotlight (top right of the menu bar), the total of is 90,000
Using Numbers, I also get 90,000
=SUM(E1:E8)
There is something wrong with your data.
Please post a screenshot

My apple id is not working i fill up all information but will not work

My apple account is not working i fill all information but still not working i am facing problem again and again sing up problem and my bill problem and my bank card problem i want to download some thing its free on apple store but error in sing in problem and billing

Settings>itunes and apps stores. Be sure to fill in the ID and password. If you get an error, then you are using the wrong ID and/or password.
Try this link...
http://support.apple.com/kb/HT1918

HT1296 i have a load of stuff on my ipad but I can't get it onto my conputer, pressing sync comes up with a message saying it will all be deleted. I've transferred all purchases but this only does the few things I've got from apple (apps and a few itunes)

I own an ipad2 and have loads of music and vids/photos etc on it from an old pc.
I just bought a new pc and wanted to transfer everything to the new pc
I've transferred purchases but this only transfers things bought in the itunes store like apps and a few songs
The rest of the content is still on my ipad.
When I press sync, it warns that it will delete all the content on my ipad and replace with the few things I've managed to import.
How do I transfer all the content to the new pc?

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

Superdrive not working correctly (not reading CD-Roms)

Since installing Snow Leopard last year, I have found that my intel iMac no longer reads CD-Roms (commercial music CDs). It will still read/write to DVD-Rs, read and play DVDs, read/write to CD-Rs. Any ideas? I'm not fond of spending $200+ for a new internal Superdrive, when I can pick up a new slimline DVD read/write combo unit for $30.....

Mariamne,
The plot unfolds... Look for any copy-protection notices on the faces of your problematic commercial discs. If you find any, stop here and post back. If you don't, please continue.
Load a problematic original commercial CD into the optical drive. Once it mounts, check the file sizes of the individual tracks, which should be somewhere in the range of 30-50 MB per file. Do this via a Finder window. (You won't be able to view the file sizes via iTunes unless you first import the files.) If the sizes are in this range, then continue. If not, stop and post back.
Launch iTunes and from the iTunes menubar, choose iTunes>Preferences. Click on the Advanced tab in the preferences window and then click on Importing. Make note of your preferred import setting so you can reset it again later. There select Import Using AIFF Encoder and check the four boxes below. Next click on the Burning tab and select the Audio CD burn option. Click Okay to close the window and then import the CD. The imported file sizes in iTunes should match the CD file sizes of the original disc. if they do, please continue. If not, stop and post back.
Attempt to play the imported files with iTunes. If successful, eject the original CD and attempt to burn a blank CD. Check play on the burned CD once it mounts to the desktop, using iTunes.
Please post back with your results.
Gary
ps: What type of computer are you dealing with here? Is it a Powermac G4 or an Intel iMac?

My subscription is not working-I purchased it in September. I only get the subscribe screen, no login screen.

I always get the "subscribe screen". I have a Dell Laptop with Windows 7 and I use Chrome as my browser.

Hi lhweiss,
Please clear the browser cache and then try logging on directly to https://cloud.acrobat.com. You may also want to try a different web browser (see System requirements | Acrobat.com for a list of supported browsers).
Best,
Sara

Parental Controls are not working correctly. Websites I've listed under Allow Access are still blocked. How can I fix this?

Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

Similar Messages

Maybe you are looking for