Applying multiple behaviors

Hi,
I just picked up motion today so trying to figure out the basics here. Quick question:
I have an object and I've applied a behavior (fade in and out). Now I'm trying to apply a second behavior (some bouncey thing) during the middle of it. Even once I apply the bounce and play it back, only the fade in and fade out happens.
I'm sure I'm neglecting something super simple and would appreciate any light that is shed. Thanks!

I'm sure you are mistaken. Why? Because the behavior on page
A cannot
affect the events that occur on page B merely by executing
some client-side
javascript (well, they can but you would have to write a
cookie that is
passed to page B, or use javascript to parse a URL variable
from page A's
link, and I'm reasonably confident that GL didn't do that).
Notwithstanding those comments, it's quite possible to have
multiple
behaviors applied to a single page element (e.g., image
swaps, element
show/hides, element property changes, window opens, etc.),
but in the
particular case you are describing, I'm certain there must be
a mistake.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"HitmanInc" <[email protected]> wrote in
message
news:fgd33v$msi$[email protected]..
> In GL I could add multiple behaviors to a button. First,
I would direct
> the
> button to a page, then add as a second behavior for an
.html file to drop
> into
> an iFrame. I've done it on several sites and frustrated
DW makes it
> difficult.
> I was told by Adobe that it could be done in DW, but
that you need custom
> code...
>

Similar Messages

Help, how to apply multiple style to a component

In HTML we can write class="styleA styleB" to apply multiple
style, but it's not allowed in flex3.
So is there a way to walk around? like
.styleB{
//include styleA
}

You have to combine all songs into one file by using software, for example Audacity.
PS: I owe this knowledge to a post by Victoria Bampton.

Multiple behaviors in a Table

Hi All -
I am new to Dreamweaver and CS5 but have used FrontPage extensively. I am trying to see if Dreamweaver can do something that FrontPage would not. The link below shows a distance table I created using FrontPage. I added a behavior to highlight the row heading cell with a distinct bacground color when the cursor is on an interior cell. It would be neat if I could also get the interior cell the cursor is on to have its background color change at the same time. The column heading cells at the top are actually images turned sideways, so I realize there's nothing there I can do.
http://www.allhikers.com/Allhikers/Hiking/Trail-Distances-Campsites/Detailed-trail-distanc es-west.htm
Richard

I am new to Dreamweaver and CS5 but have used FrontPage extensively.
This is actually a disadvantage. FP taught its users MANY bad habits.
It would be neat if I could also get the interior cell the cursor is on to have its background color change at the same time.
You can certainly do this with DW, but you would need to work it some at the code level.
Do this -
1. Give each such <td> a unique ID value (some have them - most do not)
2. Click in each cell, click on the "<td#xxxx>" that you see on the Tag Selector bar (the "xxxx" corresponds to the unique ID value you have applied)
3. Apply a Change Property behavior to change the background color to some new value
4. After applying the behavior change the event shown in the Behaviors panel to "onMouseOver" from "onFocus"
You can see this working on the Indian Garden cell for the Bright Angel Trailhead at this location - http://www.murraytestsite.com/hiking.html
You will also have to apply a corresponding onmouseout Change Property behavior to revert the color to the previous one. This will be tedious, but made MUCH easier if you can work in Code view.

3D: Deleting a mesh, applying multiple materials, "New volume from Layers"

I am learning the 3D capabilities of Photoshop CS5 Extended and have some questions that do not appear to be covered in the help reference material:
Can I remove a mesh from a 3D Layer / scene?
For instance, after having merged two 3D layers together.
Can I apply multiple materials to a single mesh?
I can see that more complex meshes have multiple materials applied to them. Does Photoshop have the capability to add/remove more than one materials to meshes?
What is "New volume from Layer" intended to do?
I couldn't find this specific menu item in the help reference material anywhere.
Thanks,
B.
PS: I sat waiting on hold for Adobe tech support for 2 hours and 17 minutes with no signs of life before giving up. When I explored callback options online, the website said that no options are available for Photoshop. This level/absence of support is mind-bogglingly awful for an enterprise like Adobe. I know me grousing about it here won't change anything, but I need to get my frustration out of my system and writing it down helps.

Hi B.,
Can I remove a mesh from a 3D Layer / scene?
For instance, after having merged two 3D layers together.
You can only hide meshes in the scene, not remove or delete them. You have to delete the whole 3D layer to remove meshes from a document.
Can I apply multiple materials to a single mesh?
I can see that more complex meshes have multiple materials applied to them. Does Photoshop have the capability to add/remove more than one materials to meshes.
With Photoshop you can't replace an existing single material with multiple materials. There's very limited ability to edit UV mapping and you'll want to do that in a full 3D modeling application. Repoussé meshes are created with 5 materials to a single mesh object so technically, yes to your question; But that's not really what I think you're asking.
What is "New volume from Layer" intended to do?
I couldn't find this specific menu item in the help reference material anywhere.
This has applications in scientific and medical imaging, but doesn't need to only be used there. An example would be to use a DICOM format, multi-sliced imaging scan and have the layers of the scan modeled into a volume. It is really just taking successive layers and placing them at equal distance in space. The Render Settings dialog offers a few options to vary the displayed volume after it's generated.
I'll see if I can get that model tomorrow and try to find out why the menu items are not working. You're talking about the group of 4 that includes 'Hide Nearest Surface', right?
regards,
steve

[javax.servlet.Filter] can i apply multiple jsp & servlet to a filter?

i have try to applied multiple jsp page & it runs correctly.
my descriptor is like this:
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <url-pattern>/user/a.jsp</url-pattern>
        <url-pattern>/user/b.jsp</url-pattern>
        <url-pattern>/user/c.jsp</url-pattern>
    </filter-mapping>now i want to add a servlet, but that filter is not executed...
i have tried descriptor like this:
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <url-pattern>/user/a.jsp</url-pattern>
        <url-pattern>/user/b.jsp</url-pattern>
        <url-pattern>/user/c.jsp</url-pattern>
        <servlet-name>dServlet</servlet-name>
    </filter-mapping>and like this:
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <url-pattern>/user/a.jsp</url-pattern>
        <url-pattern>/user/b.jsp</url-pattern>
        <url-pattern>/user/c.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <servlet-name>dServlet</servlet-name>
    </filter-mapping>both are not work...
is the descriptor wrong? what is the correct descriptor?
thank you.

i forgot about dispatcher type...
the servlet is accessed via FORWARD
& i map the servlet to /WEB-INF/dServlet...
it is wrong? but the servlet is accessible...
    <servlet-mapping>
        <servlet-name>dServlet</servlet-name>
        <url-pattern>/WEB-INF/dServlet</url-pattern>
    </servlet-mapping>the web.xml now is:
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <url-pattern>/user/a.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <url-pattern>/user/b.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <url-pattern>/user/c.jsp</url-pattern>
    </filter-mapping>
    <filter-mapping>
        <filter-name>AnonymousFilter</filter-name>
        <servlet-name>dServlet</servlet-name>
        <dispatcher>FORWARD</dispatcher>
    </filter-mapping>i put this inside the filter:
System.out.println(System.out.println("Anonymous Filter > " + httpRequest.getRequestURI());& hopelessly when i access from a.jsp, b.jsp, c.jsp the filter do print in System.out. but not from servlet...
someone please help me...

Applying multiple blending options to same layer?

How could I apply multiple layer blending options to a single layer? Currently, when I select a blending option and switch to another, it removes the previous blending option
Thanks.

You can duplicate the layer and set the top layer to the second blend mode. Or you can create an adjustment layer, and set its blending mode to the preferred second mode (this will blend a merged visible copy of the layers below back into the visible stack). It depends on what you're trying to do. In general though, blending modes are a blend of one layer's pixels into a merged visible copy of those below, so adding two modes to a layer seems to me impossible.

Apply multiple effects at once in imovie hd?

i have applied multiple effects to a clip ("adjust color," "soft focus" "brightness and contrast" etc).
the effects in combination create a distinctive look which i would like to apply to a whole movie. but it takes a long time to apply each effect.
is there a way to copy or save a group of effects as a set, and then apply them all at once in order to save time?

how MUCH faster is FC for rendering effects?
Not any faster at all.
The difference is that you can apply them all within a few seconds and then have lunch (or whatever) while FCE renders ALL of them in sequence without further user interaction.

Applying multiple strokes with JS

Does anybody have any idea, how to apply multiple strokes to a path with JavaScript? Assigning strokes width, caps, position in stack (my particular concern)? All i can do at the moment is to apply a single stroke. Thanks in advance!

I'm writing a script that would generate random stroke appearences on the fly, so using premade graphic styles does not work for me. Your samples work for a single stroke and so far i can't figure out how to apply several of them to the same path. Every next setting overwrites the previos. Can't get, say, two storkes of different width and color applied to the same path.
yourpath.zOrder (ZOrderMethod.SENDTOBACK); works in the layers stack for moving layers up and down, and i would like to move strokes in appearance tab the same way. Can't figure out how to make it either. Thank you anyway, Carlos!

Applying multiple themes in powerpoint?

Does anyone know how to apply multiple slide themes or multiple slide masters to one powerpoint presentation?

Yes or export as individual QT movie files and joint them with iMovie, QT Pro or a 3rd party app just for joining movies.

Apply Retiming Behavior to Effect Source

Hello community!
I'm trying to build a Motion Effect that I can use in FCPX.
The effect should mimic a stop motion feeling. To start off, I would like to apply a Strobe Behavior. (Library>Behaviors>Retiming>Strobe)
This is where I run into my first problem. I assume, that I need to apply the behavior to the Effect Source, but no matter how I try dragging and dropping, hitting the Apply button, and holding down Modifyer keys, the behavior doesn't stick to the Effect Source.
Am I missing a basic conceptual thing here?
Thanks in advance!
Manfred

OK - I think this will work for you:
You will need to Clone the source.
Add a Strobe filter to the clone and publish the Strobe Rate.
Replicate the Clone.
Publish Source Start Frame
Publish Hold Frames and Hold Frames Randomness and the Random Seed button
How to make it work in FCPX:
Set Strobe Rate to about 10 (to start)
Set Hold Frames to about 10
Set Hold Frames Randomness to 13 or so
You will need to keyframe the Source Start Frame from 0 to some value that will finish the clip by the last frame. So, Keyframe Source Start Frame to 0 at the first frame then go to the last frame (type down arrow then left arrow to back up one frame) and drag the value until the last frame of the clip shows (otherwise the clip will fall short or if you go too far, it will partially loop -- which may be what you want for some clips!)
Play... (seems to me to work very well.)
You may not need Hold Frames if Strobe Rate is enough.

Lightroom 2.0 Apply multiple presets to selected images

Lightroom 2.0, Windows XP or Vista
Is it possible to apply multiple presets, e.g. General - auto tone and General - punch to a selected range of images in Library or Develop Mode?
What are the steps to do this?
Thanks in advance,

I'll try to clarify my question regarding presets.
1. Can I somehow apply more than one preset to images during Import?
2. Can I select a group of images, in either the Library or Develop mode, and apply a preset to the entire selection with one or 2 clicks of the mouse. I'd like to avoid clicking on each image to apply the preset.
I'm not concerned that the multiple presets may be additive. In fact that is exactly what I am trying to accomplish.
Thanks much for your patience, I'm a newbie.

Help with multiple behaviors applied to a form

I built a simple form for two purposes: to collect name and email, and allow the user to download a pdf document (free report). The user MUST successfully submit their name and email BEFORE they are allowed to download the pdf.
To do this, I assigned the "validate form" and "open browser window" behaviors to the submit/download button, so when the form is submitted, the user is automatically taken to the pdf.
THE PROBLEM is when the user leaves a required field blank, the validation error pops up to say "___ is required", but the pdf still opens in another tab even though the form hasn't been successfully completed.
How can I make the pdf download conditional upon successful submission of the form? I know there has to be a way, but since I'm only familiar with HTML & CSS and have limited knowledge of javascript, PHP, etc, I cannot even begin to figure it out... I've tried searching the forums and Google for answers, but no luck.
PLEASE HELP!
Thank you!

Never mind, I fixed it.
I assigned the "open browser window" behavior to the form tag for the "onSubmit" event. That did the trick.
So now the code looks like this:
<form action="" method="get" name="downloadreport" onsubmit="MM_openBrWindow('assets/Capturing_Interest.pdf','','')">
<p align="left">Name: <input name="first" type="text" class="textfield" id="first" size="29" maxlength="50" />*<br/>
     Company: <input name="company" type="text" class="textfield" id="company" size="26" maxlength="50" />*<br/>
     Your Title: <input name="position" type="text" size="25" maxlength="50" class="textfield" /><br/>
     E-mail address: <input name="email" type="text" class="textfield" id="email" size="21" maxlength="50" />*
</p>
<p align="left"><input name="download" type="submit" onclick="MM_validateForm('first','','R','company','','R','email','','RisEmail');return document.MM_returnValue" value="Download the free report" /></p>
</form>

Applying/Removing Behavior at Run-Time. (Or the "pass" command)

I know it must be possible to do this, but I can't figure out
how. I need a
particular sprite to have a behavior either applied or
removed at run-time.
I tried using the "pass" command to get mouse-input to click
through the
object if certain conditions are not true, but it doesn't
seem to work.
Here's a sample of the script:
on mouseWithin me
if (someConditions) then
if the mouseDown then
<do a bunch of stuff>
end if
else
pass
end if
end
Technically, if the conditions are FALSE, it should skip
right past the rest
and pass the mouse input down to lower sprites, but it
doesn't. I've tried
a whole bunch of different things, adding the "pass" to
mouseDown and
mouseUp events, but most of the things in this game are
controlled by
mouseWithn/if the mouseDown, allowing you to click and drag
over multiple
sprites to record a down-click on all of them. (Also tried
using
mouseEnter, but that didn't work either.) I'm guessing that
the "pass"
command only works on explicit "mouseUp" and "mouseDown"
events, and doesn't
apply to other cases. If that's true, then I need to simply
have this whole
behavior not be there if those conditions are FALSE. Any
help?

Never mind, I got it.

How to apply multiple saved headings/footers to a document?

Good afternoon!
I hope this 1) isn't a duplicate question (I searched for similar problems before posting) and 2) isn't the case of stupid human error I suspect it is.
Basically, I've created and saved five or six different header/footers that I need to apply to a document. After opening my document, I follow the following steps:
1. Document -> Header & Footer -> Add -> Apply first saved header
2. Save document
3. Document -> Header & Footer -> Add -> Click "Add New" -> Apply second saved header
At the point where I choose the second saved header, the header I applied first disappears in the preview window, and as soon as I apply the second saved header, it overwrites the first header entirely rather than coexisting with it on the page.
Is there a way to make multiple saved headers/footers exist simultaneously in a single document? I know you can add new headers/footers by hand to a document with existing headers/footers as described in the Acrobat Help File, but I have scores of documents to apply these to, so I wanted to use saved settings together with a batch job.
I hope that's all clear, but please let me know if there's any confusion as to what I've done/need to do.
Thank you so much in advance for your assistance.
JMW
P.S.
All PDFs were created using Adobe Acrobat/Distiller 8.0 and Framemaker 9.0 on Windows XP SP4.

Bon Dias,
If the values for Top, Bottom, Left, and Right are the same in the Margin pane of each saved setting's "Add Header and Footer" dialog you may want to consider making each saved setting's Margin setup different.
Be well...

Payment Predictor applying multiple payments to the same Item when customer send more than 1 payment in 1 deposit.

We have an issue where customers are sending us multiple payments and they come in the same deposit. When payment predictor runs, it is applying both the payments to the same Item using different algorithms. I would think when an Item is selected by 1 payment it should be tagged like it is on a payment worksheet and another payment should not try to apply it to the same item. Ex: we have an Item with balance $1356. Two payments came in for the same customer for $992 and $1356 in the same deposit. Payment predictor applied both payments to the same Item using #BALANCE and #OLDESTC algorithm. The Item now has a balance of -$992. Did anyone else see this issue?
Thanks,

Are both the payments for the employee not transferred or only the unpaid one ?
How about paying both the amounts(status paid) and then do a transfer to SLA.
Cheers,
Vigneswar

Applying multiple behaviors

Similar Messages

Maybe you are looking for