Apps report print on PDF format
Hi all,
I want to print my report from apps in PDF format, so can anyone tell me how to print report from apps in PDF format.
Is there any document ID in metalink or can anyone tell me the complete steps for taking report in PDF format.
Thanks & Regards
In the earlier version of apps (before 11.5.10), we used to do it using bitmap reports. Now we can use XML Publisher, it is easier to design the layout in rtf rather than bitmap report (rdf).
Check Metalink Note: 278727.1 for more information.
HTH
Similar Messages
-
Printing report output in PDF format
Hi,
I want to know what are the settings needed to print a report output in PDF format, while executing the report from Oracle applications (Ver 11.5.6).
Report is executed as a concurrent request from Oracle applications.
Normally when we run the report from Oracle applications, output will be opened in a internet browser(IE) in HTML format. But I want the output to be opened in PDF format instead of HTML.
OS: Sun Solaris 2.8.
Thanks & Regards,
SarishHi Sarish
Please contact Oracle Support for an answer or to customise your application so that it prints a report output in PDF Format.
To get PDF output you must run report/job with DESFORMAT=PDF in the command line instead of DESFORMAT=HTML/HTMLCSS.
Regards
Sripathy -
Oracle HTMLDB report output in PDF format using FOP
Hi,
We are currently using Oracle HTMLDB1.6.I am trying to implement the HTMLDB report output in PDF format.I got at document but it is not clear.Could you please let use know wheether anybody has already used in their organization.
Appreciate your response.
Regards
MuraiHey Murai,
did you read the technote:
http://www.oracle.com/technology/pub/notes/technote_htmldb_fop.html
There is anything explained!
greets,
tim -
Report output in PDF format instead of TEXT
Hello every1,
I am using oracle application E-bS version 11.5.10.2 and i want ORACLE reports output in PDF format instead of standard 'text' default format(the place where v register concurrent programs). so can any one tell me what changes should i do to achieve my goal i had change format as pdf in concurrent program and run report but it shows error as follows:
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Plz. share your knowledge regarding.
Radhi
Edited by: user713 on Jun 20, 2011 9:32 AMHi,
check this support note.
Reference
Master Note : Comprehensive REP-3000 Troubleshooting and Overview Guide (Doc ID 200474.1)
Regards, roberto -
Not Able to Print in PDF Format Apex
we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,
Can any one please help me on this issue....
Thanks
MalleswarHello Malleswar,
we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,If your scenario with APEX Listener is generally capable of producing a PDF when using a working template, than the error is very likely to be in your template, not in APEX Listener.
If that's the case, you'll probably find more people with experiences on how to build custom xsl-templates into your APEX application in the APEX forum: {forum:id=137}.
If you decide to post there (or even if you think it's better to continue here), please provide information on your APEX and APEX Listener version and whether you see some error information in APEX Listeners log when trying your own template or not. If you don't see anything there right now, enabling debug mode will make the log more verbose and probably provide a hint on which part of your template can't be processed properly by the FOP built into APEX Listener.
-Udo -
Print Report Output in PDF Format
:-) Hiee E'body
I generated the output of a Report(developed in Report Builder 6i) in PDF format.
The output file is created properly and the PDF file gets displayed on the screen in proper format but when i try to print the PDF file it gets printed across the page instead of printing
it straight.
I have checked all page and printer settings but cannot find the reason for this.
If anybody is aware of the solution to this problem please guide me for the same.
Have a nice day !!
Thanking You ..
Vivek Kapoorhello,
sounds like you have a problem with portrait/landscape orientation of your document.
regards,
the oracle reports team --pw -
Problems with the report export in PDF format
Hi All,
I am new to this forum.
I'm developing a web application that uses Java Reporting Component (JRC) to display crystal reports.
I have three problem:
1) I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
2) I want to print multiple reports one after the other to reduce the time (possibly joining two or more reports into a single PDF)
3) I want to insert, in the jsp page filters, the number of pages to print from the same report (without
opening it with Adobe Reader (Microsoft Word))
Can anyone help me? or can give a simple java code to do the same.
Thanks in advance.Hi, this works for me in 4.6B:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = i_pfad
filetype = 'BIN'
IMPORTING
FILELENGTH =
TABLES
data_tab = i_att_cont
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i000(zv) WITH 'Problem mit PDF Darstellung'.
ENDIF.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = spoolnr.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
document = ' '
commandline = i_pfad
program = 'AcroRd32.exe'
EXCEPTIONS
frontend_error = 1
no_batch = 2
prog_not_found = 3
illegal_option = 4
gui_refuse_execute = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE i000(zv) WITH 'Acrobat Reader nicht gefunden!'.
ENDIF. -
How to download the report output into PDF format
Hi friedns
from the report output when user clicks download button
it has to download to PDF format
how to do this
thanks in advance
venuhi venu,
check this sample code
Save Report Output to a PDF File
This report takes another report as input, and captures the output of that report. The output is then converted to
PDF and saved to a local file. This shows how to use some of the PDF function modules, as well as an easy way to
create PDF files.
Source Code Listing
report zabap_2_pdf.
*-- Enhancements: only allow to be run with variant. Then called
*-- program will be transparent to users
*-- TABLES
tables:
tsp01.
*-- STRUCTURES
data:
mstr_print_parms like pri_params,
mc_valid(1) type c,
mi_bytecount type i,
mi_length type i,
mi_rqident like tsp01-rqident.
*-- INTERNAL TABLES
data:
mtab_pdf like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
*-- SELECTION SCREEN
parameters:
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132'. " Paper Format
start-of-selection.
concatenate 'c:\'
p_repid
'.pdf'
into mc_filename.
*-- Setup the Print Parmaters
call function 'GET_PRINT_PARAMETERS'
exporting
authority= space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
in_archive_parameters = space
in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog= 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
spool parameters mstr_print_parms
via selection-screen
and return.
*-- Find out what the spool number is that was just created
perform get_spool_number using sy-repid
sy-uname
changing mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid= mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
importing
pdf_bytecount = mi_bytecount
tables
pdf = mtab_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
call function 'DOWNLOAD'
exporting
bin_filesize = mi_bytecount
filename = mc_filename
filetype = 'BIN'
importing
act_filename = mc_filename
tables
data_tab = mtab_pdf.
FORM get_spool_number *
Get the most recent spool created by user/report *
--> F_REPID *
--> F_UNAME *
--> F_RQIDENT *
form get_spool_number using f_repid
f_uname
changing f_rqident.
data:
lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
f_uname+0(3)
into lc_rq2name separated by '_'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform." get_spool_number
Regards,
Naveen -
Weblogic 10.3.4 as report printer for PDF printing using apex_fop.jsp
Hello,
Is it possible to use the apex_fop.jsp in combination with Oracle Weblogic 10.3.4 for PDF printing?
We have managed to get our Apex application to print PDF documents using Apache FOP with Oracle Weblogic 10.3.3 or Apache Tomcat 6 as a report printer.
But when we are trying the Oracle Weblogic 10.3.4 server as report printer, we will get the Error 500--Internal Server Error error in the pdf.
One of application server log shows the error "Expected Node-set in Path Expression".
Regards,
Mathieu Meeuwissen
Edited by: Meeuwtje on 17-jan-2012 17:00Steve,
I am using JSF2.0 and getting javax.el.ExpressionFactory NoClassDefFound issues.
OEPE Helios
Weblogic 10.3.3
I have an EAR containing one WAR.
WEB-INF/lib
el-api-2.2jar
el-imp-2.2.jar
jsf-api.jar (2.1.1)
jsf.impl.jar (2.1.1)
jstl.jar (1.1.0-D13)
web.xml has
<context-param>
<param-name>com.sun.faces.expressionFactory</param-name>
<param-value>com.sun.el.ExpressionFactoryImpl</param-value>
</context-param>
EAR has
weblogic-application.xml with
<wls:prefer-application-packages>
<wls:package-name>org.eclipse.persistence.*</wls:package-name>
<wls:package-name>javax.faces.*</wls:package-name>
<wls:package-name>com.sun.faces.*</wls:package-name>
<wls:package-name>com.sun.el.*</wls:package-name>
<wls:package-name>javax.el.*</wls:package-name>
</wls:prefer-application-packages>
I see by your post that JSF2.0 support can be solved by either deploying a shared-library or using the weblogic.Deployer utility. Unfortunately, we don't have access to change the Weblogic instance in any way. I was hoping that using the prefer-application-packages would be sufficient to use alternative classes to Weblogic's but I have not been able to get it to work for the javax.el classes. I have tried not including javax.el and the app deploys but then accessing a page produces a javax.el.ELResolver no method found for invoke. Invoke being a newer method defined in el-api-2.2.jar. If I was able to convince them to add some shared libs, what are all the jars that would be required to make this work?
Any suggestions would be greatly appreciated.
Thanks
John -
.tdms report generation with .pdf format
Hi,
My problem is a kind of report generation problem.My data logging format is .tdms format and i use tdm file viewer function to view my datas but i didnt use tdm data report generation function.How can i use this function with my code.Actually i want to print automatically like pdf format...
Attachments:
ustalt.vi 62 KBkacco wrote:
Hi Yye,
İ use diadem and labview 09. I know diadem is very good solution to view data but i want to print automaically.My data type is .tdms(test data management system) if u look my .vi you can understand.
ı want to print aoutomatically with my channel and group.
I can see from your code that you are a beginner. Your coding style is very Labview no-no. But well every Labview pro have some time been a beginner I have some problems understanding or grasp the essence of your problem. Can you post your failed attempt to use rapport generation. It would help in the understanding of your problem.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
How can I convert a report/ ALV in PDF format?
Can you tell me how can I convert a report or ALV in PDF format?
Regards,
Subhasishhi ,
check this..
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
regards,
venkat. -
How to include "password protection" in a report, downloaded in .pdf format
Hi,
The client need the reports to be password protected after downloading it to pdf format.
i.e., If a report from the dashboard is being downloaded in pdf format, then while opening it should ask to enter the password.
So this will be a secure document that can be sent over mail.
Is such feature available in OBIEE 10g/11g? If yes, please let me know.Hi,
Could somebody tell the same can do in Discoverer also?
Thanks,
Kamal -
I am trying to print clothing patterns on my printer and they must be in PDF format. I was told I needed Adobe Reader, a FileOpen plug-in, and finally Firefox Plug-in. I downloaded all of this and I still cannot open anything in PDF format. Thank you Bonita Rainey
call the same smartform(Function generated from smartform) in your bsp application, get the otf outof it, convert that to pdf and show it. follow your previous thread and check the blog mentioned there.
-
Purchase Order print in PDF format directly to vendor
Hi Experts,
I have two requirements regarding PO print out to vendor. I am using release strategy for Purchase Order.
1. When the Purchase Order is fully approved, a mail should go to corrosponding vendor with PO print out in PDF format as an attachment.
2. When PO is cancelled (all PO lines are deleted) then mail should go to vendor that PO has been cancelled.
Please let me know the steps / procedure for these requirements.
regards,
Anand.Anand,
Hi again!!
Are you planning to send an email to the vendor?
This is possible in many ways..
1. you could send a normal out put via EDI and the vendor can convert the xml file to PDF at his end
2. You could send it as a FAx and the vendor can still receive it as a PDF
3. You can email the vendor in a PDF format
I am sure you understand how an email is sent to the vendor.. You'd have to work with samrtforms to convert the O/p to PDF or convert the spool to PDF. -
Font problem in reports produced in PDF format
Dear all,
All our reports are developed by developer suite 10g (under windows) and deployed on an Application Server 10g (on Linux).
We had a problem with displaying the arabic letters, but this was solved by following the steps in the metalink Note no 726205.1 for generating arabic pdf reports on unix.
Now, the problem is that the font used in the reports is ARIAL, but when the reports are displayed (in PDF format) the font is TAHOMA. This font conversion happens in both Arabic and English reports !
I wonder how can I correct this behaviour.
Thanks in advance for your time.
NaglaaSteve,
I remember that fonts in PDF generated by Oracle Reports is a big topic and a subject of many Metalink notes (metalink.oracle.com).
Note.210318.1 Ext/Pub How To use font embedding in Reports 9i for PDF output
Note.207711.1 Ext/Pub How to Use Font Subsetting in Reports 9i for PDF Output
Note 232975.1 "Windows/Unix Font Issues: What Information is Required to address the Issue and How to Work Around Issue"
Especially on Unix and Linux systems, there are some font mapping required. I suggest to run this question on the Reports forum here on OTN where I think you have better chances for an answer.
Frank
Maybe you are looking for
-
My Apple ID account not showing up in iMessage
I recently got an iPad mini. When I open iMessage, the option to connect my Apple ID account with my iMessage is unavailable. What can I do?
-
I have tried to watch programmes on ITV player, which I have successfully done in the past, but now it tells me it cannot find the video and that I need to turn off ad blocking on my computer. I went into options, but could not find anything about ad
-
Hi, All, Is there anyone here can tell me what's the whole end-to-end Downpayment process for Vendor? I have done one business scenario. Step below: 1. Create Info Record 2. Create Contract for that vendor 3. Maintain source list and assign contract
-
I just bought a 13 inch MBP yesterday. I know macbooks are supposed to sleep when the lid is closed by default. But a few times when I opened the lid, the computer had appeared to turn completely off. The indicator light on the front was steady when
-
Update column in screen painter
i have column in screen painter and i write data when i make enter it's dissapear why???