APS function GD80 when OC.Put it back in the next betas!Or realize Offset-VCore

Hello,
I am betabiostester from the German MSI Forum.
Mainboards:GD65/GD80
RAM: any Gskill Ripjaws 2000mhz( G Skill F3-16000CL9-2GBR )
OS: fresh XP32SP3 and Win7 64bit
PSU: Amacrox Free Style 80plus 750W,Enermax ....< not the problem
CPU: any I5-750
Graphic Cards: Geforce GTX260 and others
4x P55-GD80
Please put back APS(phases) function in new Betabioses !!
If its possible, put the CPU APS function@OC Enabled back in the next GD80-betas .
A7581IMS.154 ---> A7581IMS.155 and the other later betas changelog: "Set CPU APS function Disabled when system manual OC or OV(CPU voltage)" . <-for powerful 8+2 phases P55-GD80 its unnecessary and not efficient@IDLE . Or try "Set CPU APS function Disabled when C-states manual Disabled" . Thats a good choice to save MOSfets,Socket and CPU + efficiency for most IDLE PCs @ OC and undervolting users ( C-states enabled) .
Or realize an Offset Vcore for C1E,like Asus,Gigabyte !!
No more Advantage for the MSI server phases now !!!
greets and good luck

With BETA A7581IMS.166 = now proper function with all modules
Thx Support
BETA A7581IMS.166 :
http://msi-forum.de/index.php?page=Thread&threadID=91959&pageNo=4
But no APS(phases) function when OC

Similar Messages

The operation can't be completed because you don't have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section?

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work

I have ipod nano 4gb silver No: MA978ZP/A. IT IS NOT FUNCTIONING. WHEN I PUT USB INTO MY SYSTEM PORT, THE APPLE SYSTEM IN THE IPOD SCREEN IS BLINING ON AND OFF WHAT SHOULD I DO

I have ipod nano 4gb silver No: MA978ZP/A. IT IS NOT FUNCTIONING. WHEN I PUT USB INTO MY SYSTEM PORT, THE APPLE SYSTEM IN THE IPOD SCREEN IS BLINING ON AND OFF WHAT SHOULD I DO

See if this helps:
iOS: Unable to Update or Restore

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Error when I put a component in the stage and I change any property

Hello
I'm using Flash CS4, as3 and adobe air file. I have an application with 3 scenes, first scene to login, second to set up, and third to see an video.
The problem is that, when I put a component in the second or third scene, if a change any property in the component inspector, any property it gives me error. So put the component and I change property by code in as3.
But I'm doing things with FLVPlayback component, and now before enter the scene gives me error, the solution will be to get the original properties, but I don't remember, I could install other time Flash CS4, but I can do that for any componet, better know the solution.
For example, I have an as file who is the class named p.e. MyMainclass, and in the scene3, I put FLVPlayback, who default values it's the last I used (I don't remember default after instalation), if any code in as3, it gives me this error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at com.program::MyMainClass/__setProp___id2__scene3_myvideo1_1()[com.program.MyMainClass::__ setProp___id2__scene3_myvideo1_1:7]
I remove this component, I put another one I never used, it doesn't give me error, I change any property in the object inspector, p.e. color, it gives me error, I change to original property again, and then NO ERROR.
Thanks in advance

I would reccomend that you not use scenes for that purpose, not exactly sure why but scenes are unreliable. Try putting all of your content in one scene, one timeline and just add a few stop() 's at the end of each "scene", then in your code remove scene2 and scene3 three references, and you'll possibly need to change frame anchors/targets also if you have them.
The error indctates that you have called an object that does not exist at the time the code is run, check where you placed your code, should be frame one, scene1, and also check if you have objects entering the stage down the timeline, that do not enter in frame 1, possibly the movieClip? if so add another keyframe on your actions layer on the same frame as the object and enter the call function for it there.

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

How to put messages back on the server

by accident, I set up an account that deleted received messages from teh server. I believe that I set this up as a pop account. Is it possible to put messages back on the server? I couldn't see an option for this and it is important that I be able to check these messages via webmail.
any help would be greatly appreciated.
thanks
m

Before doing anything, I encourage you to make a backup copy of the entire ~/Library/Mail folder, in case something goes wrong (quit Mail first). You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
You cannot have two accounts of the same type in Mail with the same username and incoming mail server. You can, however, set up two mail accounts with the same username and incoming mail server IF the account type is different.
That is, if you really did set up this account as POP, you can set it up also as IMAP in Mail without deleting the POP account first. You should, however, disable Preferences > Accounts > Advanced > Include when automatically checking for new mail (but keep Enable this account checked) for the POP account, to avoid it interfering with the IMAP account. You can then move any messages to the mailboxes of the IMAP account where you want them to be.
EDITED: The above assumes that the provider of this account allows you to access it as either POP or IMAP, and that you chose POP by mistake. If POP is your only option and the mistake is just that the account was configured to remove messages from the server when in fact you didn't want to do that, then that's a different problem...
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

When i put an artist in the search box it crashes . I get a run time error. Why?

When I put an artist into the search box of the itunes store my computer gives me a run time error and says itunes has stopped working. Windows will notify you with a solution. They never notify me . I can play my music library with no problem but lately when I listen to music samples from the itunes store I constantly get a rebuffering notice. Now I can't even get that far My internet speed is fine. I checked with my carrier. I am thinking I may need to reinstall itunes completely but do I have to back up my library? Or is it in the itunes cloud?

The subscript error I get does obviously relate to the array, but I know in advance how much data will be transfered, 500 data points of a trace and I have DIM the array just prior to the transfer code, in the same subroutine. Also I have attemped to make the transfer a for next loop and it I get the same error at the start of the loop? The has to be another cause of this problem.

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

I sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

never mind i got it by going into my account and veiwing hidden items and there it was

I put all my itunes folder on external hard drive, now I want to put it back on the mac how do i do this

put all my itunes folder on external hard drive, now I want to put it back on the mac how do i do this.

Drag the entire iTunes folder back to /Music.

I up graded my mac mini with a new hard drive and now need ios 10.9 how do i down load it so i can put it back on the mac

how do i get the ios 10.9 so i can put it back on the new hard drive

If the Mac mini shipped with 10.6.8 or earlier, install Mac OS X 10.6, update it to 10.6.8, open the Mac App Store, and download 10.9.
If the Mac mini shipped with 10.7 or newer, connect it to the Internet, restart it with the Command and R keys held down, and install an OS. If this isn't 10.9, open the Mac App Store and download it from there.
(98457)

My iPod's headphone jack isn't working anymore, when i put my headphones in , the left l, My iPod's headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

Hi Mr.Acevedo329!
I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
Specifically, you will want to take note of this section:
The headphones don't work
If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

My macbook keeps freezing when i put my password in the unlock my computer

my macbook keeps freezing when i put my password in the unlock my computer

Hi scottschierer,
Welcome to the Apple Support Communities!
I understand that your computer reaches the login screen but does not load the Desktop after you log in. In this situation, I would recommend working through the troubleshooting steps located in the attached article to help resolve the issue.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
Best regards,
Joe

APS function GD80 when OC.Put it back in the next betas!Or realize Offset-VCore

Similar Messages

Maybe you are looking for