Arch64 auto reboot on rc.sysinit

I use multi-boot system, both ArchLinux and Windows 2003 server were installed.
Whenever my windows partition is dirty ( required to do chkdsk ),   my archlinux can NOT successful boot.
It is always automatic-reboot during the boot  on the rc.sysinit, i insert some check point, it hangs between 'L4' and 'L5'.
---- some lines in /etc/rc.sysinit
stat_busy "Mounting Local Filesystems"
read -t 2 -p "L1:" x
/bin/mount -n -o remount,rw /
read -t 2 -p "L2:" x
/bin/rm -f /etc/mtab*
read -t 2 -p "L3:" x
# make sure / gets written to /etc/mtab
read -t 2 -p "L4:" x
/bin/mount -o remount,rw /
# re-mount /proc , /sys  and usbfs so they can be written to /etc/mtab
read -t 2 -p "L5:" x
umount /proc/bus/usb
read -t 2 -p "L6:" x
if [ -e /proc/mounts ]; then
        grep -e "/proc " -e "/sys " -e "/dev " /proc/mounts >> /etc/mtab
fi
I'm wonder why the mount -o remount will to checking my ntfs and caused my system hang.
(I have already set ntf's partions as noauto in /etc/fstab).

I forgot to said. Even on arch64's boot cdrom, it also have such problem.
That forced me must recover my windows partition at first.

Similar Messages

  • 2011 Macbook Pro Retina Blackouts and constant Auto-Reboots

    Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
    Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
    The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
    I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
    I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
    Thank you so much for your concern and help!

    Hey guys, thanks for your time to look this through since you are my last hope before I drive 320 miles to Apple Store in Chicago with 14inches of heavy snow under my car...
    Here is the case: it happened today that my computer would automatically go blackout, then auto-reboots itself. It happened multiple times that I can't do anything on it. And after its auto-reboots, the screen would go black. If I click the volume keys, or power key, I can still hear the sound of them, but the screen would keep black and the computer is actually working. Thus I have to hard-reboot it by pressing the power button for seconds. But even I enter the OS system, after some seconds it just happens again and again, both on the Mac OS Maverick, and my Bootcamp Win7, no matter the power adpater is plugged or not.
    The weirdest thing is: I am now connecting the computer to my Viewsonic monitor, and the computer works perfectly: no blackout, no auto-reboots.
    I went to the campus authorized Apple retailer, and the techician told me there is nothing he could do since he is not authorized to diagnose the problem since we both thought it is the hardware problem(on both systems.)
    I have tried to reset my PRAM and SMC but none of them works. I haven't found anyone who has the same problem online, and thought my experience might helps someone who has it. And I hope we can figure it out before I drive to Chicago in such a horrible weather...
    Thank you so much for your concern and help!

  • Solaris 8 in ultra 2 got panic and auto reboot when install Oracle software

    Dear all,
    I installed Solaris 8 by selecting 'Entire Solaris Software Group' and select 32 bit support only in an old ultra II machine. Then I tried to install Oracle 8.1.7 in the same machine but machine always got panic and started auto reboot when Oracle installed about 17% or 20% or even 70% (I tried install the minimum of Oracle).
    What is the problem? Anyone can help?
    Thanks in advance,
    Vicky

    I think you need to check the parameters like SHMMAX etc in /etc/system file as recommanded by oracle if not already added you need to add them .Oracle manuals have a list of these parameters and don't forget to reboot and boot with boot -r after adding these parameters.
    Make sure you have sufficient memory or some patch recommanded by Oracle .
    Hemant
    http://www.adminschoice.com

  • Problem with my Bluetooth resulting in auto rebooting.

    I am having a problem with my bluetooth ever since I bought XPERIA mini st15i. The first time it occured, I took it to the customer care, they solved the problem. The problem did occur again after 2 weeks. So, I again took it to Service. They resolved it again. This problem has occured about 8 times. Ever since I tranfer some files through bluetooth from gallery or file explorer, the phone restatrs again and again. It shows the Xperia logo and then agin, it auto reboots until the battery dies off. I updated the phone yesterday and the problem is occuring today again. My warranty period is over,  so what can I do? In the warranty period, they changed my hardware but still the problem persists.
    I think it's some kind of bluetooth bug. Can it be fixed?

    download Sony Update Service and try this app http://www.sonymobile.com/ru/tools/update-service/ . Its helped me

  • IMac on Mavericks Auto-reboots randomly

    I have a fresh install of Mavericks OS X. Sometimes I will literally have zero apps running, I'll come see the computer after it sat idle a couple hours and I'll have this message below after it auto-rebooted itself.  I researched a trick to add the entire mac os hard drive to preferences > spotlight > privacy , then reboot, and then remove it, but that didn't work.
    Anonymous UUID:       63ECFDB1-DC98-C66C-004B-D4CEB907B367
    Thu Jul 24 13:28:23 2014
    panic(cpu 7 caller 0xffffff80051640a5): "hfs_swap_HFSPlusBTInternalNode: catalog key #17 invalid length (2560)\n"@/SourceCache/xnu/xnu-2422.90.20/bsd/hfs/hfs_endian.c:526
    Backtrace (CPU 7), Frame : Return Address
    0xffffff81689d3d50 : 0xffffff8004e22fa9
    0xffffff81689d3dd0 : 0xffffff80051640a5
    0xffffff81689d3e10 : 0xffffff800516303f
    0xffffff81689d3e60 : 0xffffff8005157a31
    0xffffff81689d3ea0 : 0xffffff8005006e6e
    0xffffff81689d3f90 : 0xffffff800500759b
    0xffffff81689d3fb0 : 0xffffff8004ed6ff7
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13C64
    Kernel version:
    Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
    Kernel slide:     0x0000000004c00000
    Kernel text base: 0xffffff8004e00000
    System model name: iMac12,2 (Mac-942B59F58194171B)
    System uptime in nanoseconds: 224255610034
    last loaded kext at 148279250004: com.apple.filesystems.smbfs 2.0.1 (addr 0xffffff7f8755b000, size 335872)
    last unloaded kext at 94500007929: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f85aa1000, size 65536)
    loaded kexts:
    com.apple.filesystems.smbfs 2.0.1
    com.apple.filesystems.exfat 1.4
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AppleBluetoothMultitouch 80.14
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AGPM 100.14.15
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleHDA 2.6.0f1
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.kext.AMDFramebuffer 1.2.0
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleIntelHD3000Graphics 8.2.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
    com.apple.AMDRadeonX3000 1.2.0
    com.apple.driver.AppleMikeyDriver 2.6.0f1
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleMCCSControl 1.1.12
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
    com.apple.kext.AMD6000Controller 1.2.0
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.AppleUSBCardReader 3.4.1
    com.apple.driver.AppleIRController 325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.5.1
    com.apple.driver.AppleUSBHub 666.4.0
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AirPort.Atheros40 700.74.5
    com.apple.driver.AppleFWOHCI 4.9.9
    com.apple.driver.AppleAHCIPort 3.0.0
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard 170.15
    com.apple.driver.AppleHIDKeyboard 170.15
    com.apple.kext.triggers 1.0
    com.apple.driver.IOBluetoothHIDDriver 4.2.3f10
    com.apple.driver.AppleMultitouchDriver 245.13
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.driver.DspFuncLib 2.6.0f1
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.5fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOSurface 91
    com.apple.iokit.IOBluetoothFamily 4.2.3f10
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
    com.apple.iokit.IOAcceleratorFamily 98.14
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.driver.AppleHDAController 2.6.0f1
    com.apple.iokit.IOHDAFamily 2.6.0f1
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleSMBusController 1.0.11d1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.7.0d10
    com.apple.kext.AMDSupport 1.2.0
    com.apple.AppleGraphicsDeviceControl 3.4.35
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleThunderboltEDMSink 2.1.3
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
    com.apple.iokit.IOUSBMassStorageClass 3.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.2.7
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IO80211Family 630.35
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 675.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.pthread 1
    com.apple.kec.corecrypto 1.0

    Dominic De Lello wrote:
    Loner T wrote:
    OWC provides lifetime warranty, check out there web site. You may be able to find issues with memory using the Apple Hardware Test - Using Apple Hardware Test.
    Thank you, I found my previous order. If the hardware tests come up inconclusive, should I still send the memory back for replacement? I'm not sure what the parameters of their warranty are.
    Please see http://eshop.macsales.com/Service/warranty/owc-memory.cfm.
    TechTool from MicroMat (http://www.micromat.com) is a good tool. Long time ago, it was included on Mac CDs.
    The free version of Memtest86 (http://www.memtest86.com) can also be used.

  • Display freezes and sometimes, system auto reboots???

    I have the Ultra 645 MS6547 mobo and am using an ATI Radeon 7500 All0in-Wonder AGP vid card. My system, has of recent, auto reboots of display frezes  maybe tree times each evening. I have worked with MSI & ATI. No concrete answers. Has anyone else experienced anything like this?

    Quote
    Originally posted by rounder
    I have the Ultra 645 MS6547 mobo and am using an ATI Radeon 7500 All0in-Wonder AGP vid card. My system, has of recent, auto reboots of display frezes  maybe tree times each evening. I have worked with MSI & ATI. No concrete answers. Has anyone else experienced anything like this?
    Wat programs were u running when it reboots or hangs? Did u experience any BSOD?

  • No auto-reboot with WSUS

    Hi all
    We're currently trying to set up a WSUS in our firm, to make updating servers easier and less of a time-wasting work.
    The goal would be, for the servers to automatically install the updates and then reboot, so a collegue or me only have to check in the WSUS to see wheter all updates were applied.
    Now to the Problem:
    Our WSUS is currently up and running and some (not all) servers in the network will, once approved, download and install the updates with the shedule. But they won't neither automatically reboot, nor directly ask me for a reboot after they're done. I either
    can wait a long time or go to setting -> windows update and press on restart now.
    The log is from the time it started the install, to the last entry it had when I opened it.
    The last entry is also what i think is the problem, but I couldn't find a solutions with googling the error, so here I am.
    The logs look like this:
    2015-04-01 14:00:22:009
    892 6d8
    AU Request to perform an AU scheduled install
    2015-04-01 14:00:22:009
    892 6d8
    AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    2015-04-01 14:00:22:009
    892 6d8
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2015-04-01 14:00:22:009
    892 6d8
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2015-04-01 14:00:22:009
    892 6d8
    AU Update {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200 was auto-approved for forced install
    2015-04-01 14:00:22:009
    892 6d8
    AU #############
    2015-04-01 14:00:22:009
    892 6d8
    AU ## START ##  AU: Install updates
    2015-04-01 14:00:22:009
    892 6d8
    AU #########
    2015-04-01 14:00:22:009
    892 6d8
    AU  # Initiating scheduled install
    2015-04-01 14:00:22:009
    892 6d8
    AU  # Approved machine updates for 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7 = 1
    2015-04-01 14:00:22:087
    892 6d8
    AU  # Approved updates for 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7 = 1
    2015-04-01 14:00:22:087
    892 6d8
    IdleTmr WU operation (CInstallCall::Init ID 2) started; operation # 271; does not use network; is not at background priority
    2015-04-01 14:00:22:087
    892 6d8
    IdleTmr Incremented idle timer priority operation counter to 2
    2015-04-01 14:00:22:118
    892 6d8
    Agent Beginning install of conventional work item
    2015-04-01 14:00:22:118
    892 6d8
    AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {AA61D5E4-0965-4140-B4D0-13B4D219F94F}, ServerId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
    2015-04-01 14:00:22:118
    892 6d8
    WuTask WUTaskHandler successfully started the task.
    2015-04-01 14:00:22:118
    892 87c
    Agent *************
    2015-04-01 14:00:22:118
    892 87c
    Agent ** START **  Agent: Installing updates [CallerId = AutomaticUpdates]
    2015-04-01 14:00:22:118
    892 87c
    Agent *********
    2015-04-01 14:00:22:118
    892 87c
    Agent  * Updates to install = 1
    2015-04-01 14:00:22:118
    892 87c
    Agent  *   Title = Update for Windows Server 2012 R2 (KB3048778)
    2015-04-01 14:00:22:118
    892 87c
    Agent  *   UpdateId = {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200
    2015-04-01 14:00:22:118
    892 87c
    Agent  *     Bundles 1 updates:
    2015-04-01 14:00:22:118
    892 87c
    Agent  *       {0739A81E-D61F-492B-9450-2AC1707FBCA1}.200
    2015-04-01 14:00:22:134
    892 87c
    DnldMgr Preparing update for install, updateId = {0739A81E-D61F-492B-9450-2AC1707FBCA1}.200.
    2015-04-01 14:00:22:134
    4288 11c4
    Misc ===========  Logging initialized (build: 7.9.9600.17489, tz: +0200)  ===========
    2015-04-01 14:00:22:134
    4288 11c4
    Misc  = Process: C:\Windows\system32\wuauclt.exe
    2015-04-01 14:00:22:134
    4288 11c4
    Misc  = Module: C:\Windows\SYSTEM32\wuaueng.dll
    2015-04-01 14:00:22:134
    4288 11c4
    Handler :::::::::::::
    2015-04-01 14:00:22:134
    4288 11c4
    Handler :: START ::  Handler: CBS Install
    2015-04-01 14:00:22:134
    4288 11c4
    Handler :::::::::
    2015-04-01 14:00:22:134
    4288 11c4
    Handler Starting install of CBS update 0739A81E-D61F-492B-9450-2AC1707FBCA1
    2015-04-01 14:00:22:149
    4288 11c4
    Handler CBS session identity: 30436467_1850714295
    2015-04-01 14:00:22:149
    4288 11c4
    Handler CBS package identity: Package_for_KB3048778~31bf3856ad364e35~amd64~~6.3.2.0
    2015-04-01 14:00:22:165
    4288 11c4
    Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\6809f963a34e237a312a57399ef56e0b\windows8.1-kb3048778-v2-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\6809f963a34e237a312a57399ef56e0b\inst
    2015-04-01 14:00:27:134
    892 868
    Report REPORT EVENT: {B2E6BF0E-B92F-4F51-A7E3-16478F0B5274}
    2015-04-01 14:00:22:118+0200 1
    181 [AGENT_INSTALLING_STARTED] 101
    {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}
    200 0 AutomaticUpdates
    Success Content Install
    Installation Started: Windows has started installing the following update: Update for Windows Server 2012 R2 (KB3048778)
    2015-04-01 14:00:27:134
    892 868
    Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
    2015-04-01 14:00:27:134
    892 868
    Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
    2015-04-01 14:00:27:134
    892 868
    Report CWERReporter finished handling 2 events. (00000000)
    2015-04-01 14:00:33:399
    4288 11c4
    Handler Requesting post-reboot reporting for package Package_for_KB3048778~31bf3856ad364e35~amd64~~6.3.2.0.
    2015-04-01 14:00:33:399
    4288 11c4
    Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
    2015-04-01 14:00:33:415
    4288 11c4
    Handler :::::::::
    2015-04-01 14:00:33:415
    4288 11c4
    Handler ::  END  ::  Handler: CBS Install
    2015-04-01 14:00:33:415
    4288 11c4
    Handler :::::::::::::
    2015-04-01 14:00:33:415
    892 87c
    AU Preventing expiration of polled reporting events until next restart
    2015-04-01 14:00:33:415
    892 9ec
    AU >>##  RESUMED  ## AU: Installing update [UpdateId = {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}, succeeded]
    2015-04-01 14:00:33:430
    892 87c
    Agent *********
    2015-04-01 14:00:33:430
    892 87c
    Agent **  END  **  Agent: Installing updates [CallerId = AutomaticUpdates]
    2015-04-01 14:00:33:430
    892 9ec
    AU Install call completed.
    2015-04-01 14:00:33:430
    892 87c
    Agent *************
    2015-04-01 14:00:33:430
    892 9ec
    AU  # WARNING: Install call completed, reboot required = Yes, error = 0x00000000
    2015-04-01 14:00:33:430
    892 9ec
    AU #########
    2015-04-01 14:00:33:430
    892 9ec
    AU ##  END  ##  AU: Installing updates [CallId = {AA61D5E4-0965-4140-B4D0-13B4D219F94F}]
    2015-04-01 14:00:33:430
    892 87c
    IdleTmr WU operation (CInstallCall::Init ID 2, operation # 271) stopped; does not use network; is not at background priority
    2015-04-01 14:00:33:430
    892 9ec
    AU #############
    2015-04-01 14:00:33:430
    892 87c
    IdleTmr Decremented idle timer priority operation counter to 1
    2015-04-01 14:00:33:430
    892 474
    AU Install complete for all calls, reboot  needed
    2015-04-01 14:00:33:430
    892 474
    AU CAUInstaller::OnAllCallsComplete |  result of install HRESULT hr = 0x00000000
    2015-04-01 14:00:33:430
    892 474
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2015-04-01 14:00:33:430
    892 474
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2015-04-01 14:00:34:040
    892 474
    AU Triggering Offline detection (non-interactive)
    2015-04-01 14:00:34:040
    892 474
    AU Adding timer: 
    2015-04-01 14:00:34:040
    892 474
    AU    Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-04-01 12:00:34, not idle-only, not network-only
    2015-04-01 14:00:34:040
    892 474
    WuTask ScheduledInstallTaskHandler received AU scheduled install complete event.
    2015-04-01 14:00:34:040
    892 474
    WuTask ScheduledInstallTaskHandler completed with hr = 0x00000000
    2015-04-01 14:00:34:040
    3528 11ec
    CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
    2015-04-01 14:00:34:040
    3528 11ec
    CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
    2015-04-01 14:00:34:040
    892 474
    AU Triggering Offline detection (non-interactive)
    2015-04-01 14:00:34:040
    892 474
    WuTask WUTaskManager received event to unregister task.
    2015-04-01 14:00:34:040
    892 474
    AU #############
    2015-04-01 14:00:34:040
    892 474
    AU ## START ##  AU: Search for updates
    2015-04-01 14:00:34:040
    892 474
    AU #########
    2015-04-01 14:00:34:040
    892 474
    IdleTmr WU operation (CSearchCall::Init ID 3) started; operation # 440; does not use network; is at background priority
    2015-04-01 14:00:34:040
    892 474
    Agent *** START ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 3]
    2015-04-01 14:00:34:040
    892 474
    AU <<## SUBMITTED ## AU: Search for updates  [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
    2015-04-01 14:00:34:040
    892 5f4
    Agent ***  END  ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 3]
    2015-04-01 14:00:34:040
    892 5f4
    Agent *************
    2015-04-01 14:00:34:040
    892 5f4
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 3]
    2015-04-01 14:00:34:040
    892 5f4
    Agent *********
    2015-04-01 14:00:34:040
    892 5f4
    Agent  * Online = No; Ignore download priority = No
    2015-04-01 14:00:34:040
    892 5f4
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2015-04-01 14:00:34:040
    892 5f4
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2015-04-01 14:00:34:040
    892 5f4
    Agent  * Search Scope = {Machine & All Users}
    2015-04-01 14:00:34:040
    892 5f4
    Agent  * Caller SID for Applicability: S-1-5-18
    2015-04-01 14:00:38:415
    892 868
    Report REPORT EVENT: {7E1602B6-2A94-4769-A590-E3DF79B71208}
    2015-04-01 14:00:33:415+0200 1
    201 [AGENT_INSTALLING_PENDING] 101
    {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}
    200 240005
    AutomaticUpdates Success
    Content Install Installation pending.
    2015-04-01 14:00:38:415
    892 868
    Report REPORT EVENT: {D637482E-0808-42A6-A4E7-797D135E4A40}
    2015-04-01 14:00:33:430+0200 1
    194 [AU_SCHEDULED_REBOOT_REQUIRED] 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Restart Required: To complete the installation of the following updates, the computer will be restarted within 15 minutes:  - Update for Windows Server 2012 R2 (KB3048778)
    2015-04-01 14:00:38:415
    892 868
    Report CWERReporter finished handling 3 events. (00000000)
    2015-04-01 14:00:51:977
    892 5f4
    Agent WARNING: Failed to evaluate Installed rule, updateId = {{A4ECF96E-FE76-4933-B1A9-FAA712DC2A3B}.200}, hr = 80070057
    2015-04-01 14:00:51:977
    892 5f4
    Agent WARNING: Failed to evaluate Installable rule, updateId = {{A4ECF96E-FE76-4933-B1A9-FAA712DC2A3B}.200}, hr = 80070057
    2015-04-01 14:00:51:977
    892 5f4
    Agent WARNING: Failed to evaluate Installed rule, updateId = {{9941EB5F-4953-446D-99A2-C5989C596283}.200}, hr = 80070057
    2015-04-01 14:00:51:977
    892 5f4
    Agent WARNING: Failed to evaluate Installable rule, updateId = {{9941EB5F-4953-446D-99A2-C5989C596283}.200}, hr = 80070057
    2015-04-01 14:01:34:179
    892 5f4
    Agent  * Added update {F8B1EBDF-8A40-4686-BEBA-094C5D8BF3B7}.200 to search result
    2015-04-01 14:01:34:179
    892 5f4
    Agent  * Found 1 updates and 68 categories in search; evaluated appl. rules of 380 out of 945 deployed entities
    2015-04-01 14:01:34:179
    892 5f4
    Agent *********
    2015-04-01 14:01:34:179
    892 5f4
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 3]
    2015-04-01 14:01:34:179
    892 5f4
    Agent *************
    2015-04-01 14:01:34:179
    892 5f4
    IdleTmr WU operation (CSearchCall::Init ID 3, operation # 440) stopped; does not use network; is at background priority
    2015-04-01 14:01:34:179
    892 9ec
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
    2015-04-01 14:01:34:179
    892 9ec
    AU  # 1 updates detected
    2015-04-01 14:01:34:179
    892 9ec
    AU #########
    2015-04-01 14:01:34:179
    892 9ec
    AU ##  END  ##  AU: Search for updates  [CallId = {86DC1035-A187-4BAA-AE71-C7386D1ECA55} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
    2015-04-01 14:01:34:179
    892 9ec
    AU #############
    2015-04-01 14:01:34:179
    892 9ec
    AU All AU searches complete.
    2015-04-01 14:01:34:179
    892 9ec
    AU Adding timer: 
    2015-04-01 14:01:34:179
    892 9ec
    AU    Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-04-01 12:26:32, not idle-only, not network-only
    2015-04-01 14:01:34:194
    892 9ec
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2015-04-01 14:01:34:194
    892 9ec
    AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
    2015-04-01 14:01:34:194
    3528 11ec
    CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
    2015-04-01 14:01:34:194
    3528 11ec
    CltUI WARNING: GetAutoRebootInXDays: Auto-reboot time not found(hr = 80070002). Nothing to do here
    I hope someone can help me with this issue.
    Kind Regard dumdidu

    Thanks for the reply, but I already proposed this and it isn't really an option. The goal is to get a comlete oversight with WSUS with as less inputs as possible.
    But maybe you can riddle me this column from the log:
    2015-04-01 17:57:45:862
    828 1090
    RebootNotify UpdateRebootRequiredNotification, set reboot grace timeout reg value SecurityUpdatesRebootRequiredNotificationTime to 2015-04-03 15:57:45
    2015-04-01 17:57:45:862
    828 1090
    AU Adding timer: 
    2015-04-01 17:57:45:862
    828 1090
    AU    Timer: 13EB7139-5C9B-4817-98B7-A22174B1AA43, Expires 2015-04-03 15:57:45, not idle-only, not network-only
    2015-04-01 17:57:45:877
    828 1090
    AU AU setting reboot grace timeout to 2015-04-03 15:57:45
    Those timers are in the past. How is this even possible?
    From what I know they're two hours behind, as you can see in this log:
    2015-04-02 10:23:06:960
    916 15f4
    AU ###########  AU: Policy change processed  ###########
    2015-04-02 10:23:06:960
    916 15f4
    AU  # Policy changed, AU refresh required = No
    2015-04-02 10:23:06:960
    916 15f4
    AU  # WSUS server: http://192.168.50.160:80
    2015-04-02 10:23:06:960
    916 15f4
    AU  # Detection frequency: 1
    2015-04-02 10:23:06:960
    916 15f4
    AU  # Target group: MDU
    2015-04-02 10:23:06:960
    916 15f4
    AU  # Approval type: Scheduled (Policy)
    2015-04-02 10:23:06:960
    916 15f4
    AU  # Scheduled install day/time: Every day at 13:00
    2015-04-02 10:23:06:960
    916 15f4
    AU  # Auto-install minor updates: Yes (User preference)
    2015-04-02 10:23:06:960
    916 15f4
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    2015-04-02 10:23:06:960
    916 15f4
    AU AU settings changed through Policy.
    2015-04-02 10:23:06:960
    916 15f4
    AU Setting AU scheduled install time to 2015-04-02 11:00:00

  • Solaris 10 gen the panic message and let the server auto reboot

    My Solaris 10 server would auto reboot at anytime.
    I think is ip:tcp_unfuse problem. But I don't know how to fix it.
    Anyone know how to fix this problem!!!!!!!
    Many Thanks!
    The following is error information
    # mdb 0
    ::statusdebugging crash dump vmcore.0 (32-bit) from tophkweb
    operating system: 5.10 Generic (i86pc)
    panic message:
    BAD TRAP: type=e (#pf Page fault) rp=d4a76acc addr=9d occurred in module "ip" due to a NUL
    L pointer dereference
    dump content: kernel pages only
    panic[cpu0]/thread=d4a48c00:
    BAD TRAP: type=e (#pf Page fault) rp=d4a76acc addr=9d occurred in module "ip" due to a NUL
    L pointer dereference
    ::msgbuf...........
    httpd:
    #pf Page fault
    Bad kernel fault at addr=0x9d
    pid=277, pc=0xfeaa24b7, sp=0xd479f300, eflags=0x10202
    cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6d8<xmme,fxsr,pge,mce,pse,de>
    cr2: 9d cr3: 1e472000
    gs: fea401b0 fs: fea80000 es: d4530160 ds: ffff0160
    edi: d4594800 esi: 0 ebp: d4a76b18 esp: d4a76afc
    ebx: d479f440 edx: d3e83b40 ecx: 0 eax: a1
    trp: e err: 0 eip: feaa24b7 cs: 158
    efl: 10202 usp: d479f300 ss: d479f440
    d4a76a2c unix:die+a7 (e, d4a76acc, 9d, 0)
    d4a76ab8 unix:trap+f56 (d4a76acc, 9d, 0)
    d4a76acc unix:cmntrap+83 ()
    d4a76b18 ip:tcp_unfuse+2b (d479f440)
    d4a76bf4 ip:tcp_rput_data+4a (d479f300, d4594800,)
    .......

    other information:-
    ::regs%cs = 0x0158 %eax = 0x000000a1
    %ds = 0xffff0160 %ebx = 0xd479f440
    %ss = 0xd479f440 %ecx = 0x00000000
    %es = 0xd4530160 %edx = 0xd3e83b40
    %fs = 0xfea80000 %esi = 0x00000000
    %gs = 0xfea401b0 %edi = 0xd4594800
    %eip = 0xfeaa24b7 tcp_unfuse+0x2b
    %ebp = 0xd4a76b18
    %esp = 0xd4a76afc
    %eflags = 0x00010202
    id=0 vip=0 vif=0 ac=0 vm=0 rf=1 nt=0 iopl=0x0
    status=<of,df,IF,tf,sf,zf,af,pf,cf>
    %uesp = 0xd479f300
    %trapno = 0xe
    %err = 0x0
    $ctcp_unfuse+0x2b(d479f440)
    tcp_rput_data+0x4a(d479f300, d4594800, d3e8ef40)
    tcp_input+0x39(d479f300, d4594800, d3e8ef40)
    squeue_enter+0xb5(d3e8ef40, d4594800, feaae3c9, d479f300, 1)
    ip_fanout_tcp+0x38e(d5336b60, d4594800, da979714, d3e83ba0, a3, 0)
    ip_wput_local+0x1bb(d5336b60, da979714, d3e83ba0, d4594800, d45318c0, 0)
    ip_wput_ire+0x1436(d5336b60, d4594800, d45318c0, d513d540, 2)
    ip_output+0x70a(d513d540, d4594800, d5336b60, 2)
    tcp_send_data+0x5f9(d513d680, d5336b60, d4594800)
    tcp_xmit_end+0x88(d513d680)
    tcp_close_output+0x115(d513d540, d513d890, d3e8ef40)
    squeue_enter+0x1bf(d3e8ef40, d513d890, feaa5924, d513d540, 6)
    tcp_close+0x6c(d5336ad8, 83, dad03b48)
    qdetach+0x8b(d5336ad8, 1, 83, dad03b48, 0)
    strclose+0x2e3(d4675000, 83, dad03b48)
    socktpi_close+0xd7(d4675000, 83, 1, 0, 0, dad03b48)
    fop_close+0x26(d4675000, 83, 1, 0, 0, dad03b48)
    closef+0x56(d508d950)
    closeandsetf+0x2e7(16, 0)
    close+0xd()
    sys_sysenter+0xdc()
    tcp_unfuse::distcp_unfuse: pushl %ebp
    tcp_unfuse+1: movl %esp,%ebp
    tcp_unfuse+3: pushl %ebx
    tcp_unfuse+4: pushl %esi
    tcp_unfuse+5: movl 0x8(%ebp),%ebx
    tcp_unfuse+8: movl 0x2cc(%ebx),%esi
    tcp_unfuse+0xe: movb 0x9d(%ebx),%al
    tcp_unfuse+0x14: testb $0x1,%al
    tcp_unfuse+0x16: jne +0x15 <tcp_unfuse+0x2b>
    tcp_unfuse+0x18: leal 0x2d0(%ebx),%eax
    tcp_unfuse+0x1e: pushl %eax
    tcp_unfuse+0x1f: pushl %ebx
    tcp_unfuse+0x20: pushl 0x40(%ebx)
    tcp_unfuse+0x23: call +0x75b <tcp_fuse_rcv_drain>
    tcp_unfuse+0x28: addl $0xc,%esp
    tcp_unfuse+0x2b: movb 0x9d(%esi),%al
    tcp_unfuse+0x31: testb $0x1,%al
    tcp_unfuse+0x33: jne +0x15 <tcp_unfuse+0x48>

  • IOS 8.02 update cause iPad Air to auto reboot while playing games and always 'No Sim installed' appears

    I have updated my iPad 3 and iPad air to the latest update iOS 8.02 sinice a week ago. The iPad 3 is okay while the ipad air is having problems. Firstly it randomly auto reboots and apps auto shuts as well. Secondly the 'No Sim installed' always appears while using the iPad. Anyone having the same problem please advise how to solve these problems. Thanks.

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad and charge overnight.  Do NOT use an iPod/iPhone charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
    Also, according to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • Auto reboot / Manual reboot : easy way to apply group policy for each group without multiple AD links? Help appreciated

    Good morning,
    I have two policies for WSUS, one that auto-reboots the client and one that allows for manual reboots.  I'm sure this is very obvious, but i'm wanting to make sure I do this correctly.
    What's the easiest way to apply the policy for manual/auto reboots without having to go through my entire active directory tree and link it to each OU containing mixed computers?  
    I hope this makes sense, but I know i can set security groups and then set it for the scope, but if I go that route is there a way to apply it to all Domain Computers, EXCEPT those who are a member of security group "MPS - WSUS Manual" for example?
    Any input here is greatly appreciated
    Thank you

    If all the machines that you want to have the manual option are in a few select OUs then you could apply the auto reboot GPO to the root of the domain, and then link the manual GPO just to those GPOs containing the relevant machines. As explained here
    http://technet.microsoft.com/en-gb/library/cc785665(v=ws.10).aspx a policy applied to an OU overrides a policy applied to the domain as a whole.
    While I'm not sure, from your description I'm guessing that's the case, and they're actually mixed in throughout the domain? In which case, the other option might be to make use of group policies order or precedence. As described here
    http://blogs.msdn.com/b/muaddib/archive/2012/08/22/determine-gpo-precedence-with-gpmc-gpresult.aspx you'll see that the order that the GPOs are listed makes a difference to the order that they are applied, and the last to be applied takes precedence over
    those that come before. Therefore using that, if you applied the reboot policy to everyone, and then applied the manual one with a security filter so it only applied to your "MPS - WSUS Manual" group such that it had a higher precedence, all machines would
    receive the first GPO, but those machines in that group would have that overridden by the second policy.

  • CSS 11050 SYN Attacks and auto-reboot

    Running software version 5.00 build 2 to load balance two web servers. The DOS log shows SYN attack activity--with one incident logging 62 "attacks". I read that if this value reaches a threshold, then the machine will reboot. Can someone tell me what the guidelines are for this? Are there any other events that can cause the switch to auto reboot? Thanks!

    First, you should definitely upgrade.
    5.0(2) is VERY VERY OLD.
    Next, a box never reload by itself on purpose or because it reached a certain threshold.
    If there is an auto-reboot, this means the box crash and this is not normal.
    Gilles.

  • Auto-Reboot Defaults

    Sorry for the multiple posts... I am trying to find the Auto-Reboot default options. I would like to change the defaults to a set parameter. I am looking at adding a signature to the pop-up message and extending the sleep time from 2 hours to 10 hours. I thought it was attached to the baseline setting but that didn't change anything.
    Can this be changed?
    Richard

    rhuhman wrote:
    >
    > Sorry for the multiple posts... I am trying to find the Auto-Reboot
    > default options. I would like to change the defaults to a set
    > parameter. I am looking at adding a signature to the pop-up message
    > and extending the sleep time from 2 hours to 10 hours. I thought it
    > was attached to the baseline setting but that didn't change anything.
    >
    > Can this be changed?
    >
    > Richard
    Hi
    I've been looking for this myself but can't seem to find what you are
    looking for - which is kind of a problem since it would make it a lot
    easier to deploy patches if you did not need to go in and set these
    options on every deployment.
    Niels
    A true red devil...

  • Always auto reboot after update 4.3

    im Z1 user from china, after update 4.3, auto reboot once a day,and yesterday i restore factory settings,but auto reboot also....>_<,help me please!

    As per the above advice, please see a step by step guide below:
    1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
    and install it on your PC.
    2. Install and open PC Companion then select Support Zone.
    3. Phone Software Update.
    4. Start.
    5. Repair Phone
    6. Continue
    7. Accept data removal
    8. Next
    9. Wait for prepare
    10. Select Phone
    11. Follow the connection steps
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • TS3274 iPad 2 Auto-rebooting continuously after OS update to iOS 7

    My iPad 2 is auto-rebooting continuously after OS update to iOS 7 . After every reboot , it is waking up for around 20 seconds and then rebooting again with apple logo coming on the black screen . I tried switch-off/on but the problem is still there . Please tell what to do .
    PS : The iOS update was completed successfully . The General>Software-Updates shows "up to date iOS 7" .

    I somehow managed to restore the ipad within 20 seconds time . I erased all settings and data by General>Reset>Erase-All-Settings-And-Data (simply reset settings did not work) . Make sure you have backup of your data (on iCloud or iTunes) before doing the previous step . Thank god , now it is working fine . *** Apple !!

  • Auto Reboot 9630

    I am using 9630 Tour os version 5.0.0.975 (Bundle 1600, Platform 4.2.0.424) for past one week it automatically strated rebooting and this happens any time i.e. while making call, talking to someone, writing email or sms and not it happens quite frequiently i.e. more than 5-7 times a day. What i have observed that it happens only when the battery is half or less than half. Now it keeps on rebooting until I take my battery out keep it for few minutes and then put it back. The last application i installed was about a month ago (Cam card business card reader). PLease help me 

    rhuhman wrote:
    >
    > Sorry for the multiple posts... I am trying to find the Auto-Reboot
    > default options. I would like to change the defaults to a set
    > parameter. I am looking at adding a signature to the pop-up message
    > and extending the sleep time from 2 hours to 10 hours. I thought it
    > was attached to the baseline setting but that didn't change anything.
    >
    > Can this be changed?
    >
    > Richard
    Hi
    I've been looking for this myself but can't seem to find what you are
    looking for - which is kind of a problem since it would make it a lot
    easier to deploy patches if you did not need to go in and set these
    options on every deployment.
    Niels
    A true red devil...

Maybe you are looking for

  • Adobe AIR for Android - GPU Mode - Bitmap Auto-Smoothing Issue

    Hi everyone I'm having a bit of an issue with the AS3 bitmap object. I'm currently developing an 8-bit style pixel game for AIR for Android. This game is being developed at a very low resolution and is being scaled up to maintain the charm of an old

  • Imac 24" - transparent screen, now doesn't restart

    my 2 year old 24" imac screen went to a transparent grayish whitish screen, since I could not get it to come back to normal I powered off to reboot. Now the imac will not even restart when I press power "on" button. Any ideas or help???

  • Needed: flash for dummies - a template for HTML snippet

    I am a dummy when in comes to code. I understand that iWeb '08 uses "HML Snippets" and by using them, you can add flash movies (.flv or .swf) to your iWeb '08 created site. What I (and apparently many other dummies) need is a step by step set of inst

  • Error while partitioning

    while partitioning, after clicking install i am getting the message..."The installer disc could not be found." when i ve already put in the dvd with windows 7 in it...

  • Strategy for SAP Emergency User Management

    Dear All, currently I am working in the authorizations team of an SAP ECC 6.0 implementation. As we had no Emergency Users in the past, we want to introduce them at least in the new system. I would appreciate any experiences regarding Emergency Users