Solaris 10 gen the panic message and let the server auto reboot
My Solaris 10 server would auto reboot at anytime.
I think is ip:tcp_unfuse problem. But I don't know how to fix it.
Anyone know how to fix this problem!!!!!!!
Many Thanks!
The following is error information
# mdb 0
::statusdebugging crash dump vmcore.0 (32-bit) from tophkweb
operating system: 5.10 Generic (i86pc)
panic message:
BAD TRAP: type=e (#pf Page fault) rp=d4a76acc addr=9d occurred in module "ip" due to a NUL
L pointer dereference
dump content: kernel pages only
panic[cpu0]/thread=d4a48c00:
BAD TRAP: type=e (#pf Page fault) rp=d4a76acc addr=9d occurred in module "ip" due to a NUL
L pointer dereference
::msgbuf...........
httpd:
#pf Page fault
Bad kernel fault at addr=0x9d
pid=277, pc=0xfeaa24b7, sp=0xd479f300, eflags=0x10202
cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6d8<xmme,fxsr,pge,mce,pse,de>
cr2: 9d cr3: 1e472000
gs: fea401b0 fs: fea80000 es: d4530160 ds: ffff0160
edi: d4594800 esi: 0 ebp: d4a76b18 esp: d4a76afc
ebx: d479f440 edx: d3e83b40 ecx: 0 eax: a1
trp: e err: 0 eip: feaa24b7 cs: 158
efl: 10202 usp: d479f300 ss: d479f440
d4a76a2c unix:die+a7 (e, d4a76acc, 9d, 0)
d4a76ab8 unix:trap+f56 (d4a76acc, 9d, 0)
d4a76acc unix:cmntrap+83 ()
d4a76b18 ip:tcp_unfuse+2b (d479f440)
d4a76bf4 ip:tcp_rput_data+4a (d479f300, d4594800,)
.......
other information:-
::regs%cs = 0x0158 %eax = 0x000000a1
%ds = 0xffff0160 %ebx = 0xd479f440
%ss = 0xd479f440 %ecx = 0x00000000
%es = 0xd4530160 %edx = 0xd3e83b40
%fs = 0xfea80000 %esi = 0x00000000
%gs = 0xfea401b0 %edi = 0xd4594800
%eip = 0xfeaa24b7 tcp_unfuse+0x2b
%ebp = 0xd4a76b18
%esp = 0xd4a76afc
%eflags = 0x00010202
id=0 vip=0 vif=0 ac=0 vm=0 rf=1 nt=0 iopl=0x0
status=<of,df,IF,tf,sf,zf,af,pf,cf>
%uesp = 0xd479f300
%trapno = 0xe
%err = 0x0
$ctcp_unfuse+0x2b(d479f440)
tcp_rput_data+0x4a(d479f300, d4594800, d3e8ef40)
tcp_input+0x39(d479f300, d4594800, d3e8ef40)
squeue_enter+0xb5(d3e8ef40, d4594800, feaae3c9, d479f300, 1)
ip_fanout_tcp+0x38e(d5336b60, d4594800, da979714, d3e83ba0, a3, 0)
ip_wput_local+0x1bb(d5336b60, da979714, d3e83ba0, d4594800, d45318c0, 0)
ip_wput_ire+0x1436(d5336b60, d4594800, d45318c0, d513d540, 2)
ip_output+0x70a(d513d540, d4594800, d5336b60, 2)
tcp_send_data+0x5f9(d513d680, d5336b60, d4594800)
tcp_xmit_end+0x88(d513d680)
tcp_close_output+0x115(d513d540, d513d890, d3e8ef40)
squeue_enter+0x1bf(d3e8ef40, d513d890, feaa5924, d513d540, 6)
tcp_close+0x6c(d5336ad8, 83, dad03b48)
qdetach+0x8b(d5336ad8, 1, 83, dad03b48, 0)
strclose+0x2e3(d4675000, 83, dad03b48)
socktpi_close+0xd7(d4675000, 83, 1, 0, 0, dad03b48)
fop_close+0x26(d4675000, 83, 1, 0, 0, dad03b48)
closef+0x56(d508d950)
closeandsetf+0x2e7(16, 0)
close+0xd()
sys_sysenter+0xdc()
tcp_unfuse::distcp_unfuse: pushl %ebp
tcp_unfuse+1: movl %esp,%ebp
tcp_unfuse+3: pushl %ebx
tcp_unfuse+4: pushl %esi
tcp_unfuse+5: movl 0x8(%ebp),%ebx
tcp_unfuse+8: movl 0x2cc(%ebx),%esi
tcp_unfuse+0xe: movb 0x9d(%ebx),%al
tcp_unfuse+0x14: testb $0x1,%al
tcp_unfuse+0x16: jne +0x15 <tcp_unfuse+0x2b>
tcp_unfuse+0x18: leal 0x2d0(%ebx),%eax
tcp_unfuse+0x1e: pushl %eax
tcp_unfuse+0x1f: pushl %ebx
tcp_unfuse+0x20: pushl 0x40(%ebx)
tcp_unfuse+0x23: call +0x75b <tcp_fuse_rcv_drain>
tcp_unfuse+0x28: addl $0xc,%esp
tcp_unfuse+0x2b: movb 0x9d(%esi),%al
tcp_unfuse+0x31: testb $0x1,%al
tcp_unfuse+0x33: jne +0x15 <tcp_unfuse+0x48>
Similar Messages
-
I want to forward a message with the default headers included, but can’t seem to set my mail preferences to include the headers when forwarding, just the original message ends up in the forwarded message and not the headers? What I'm trying to do is report SPAM and add headers to a spam message to forward to sites that go after the spammers.
Did you check the article and the add-on mentioned there?
-
Automatically highlight the next message and remove the "unread" status
In my inbox on Ipad, when I swipe and delete a message or highlight the message and hit the delete icon in the upper right corner, it will automatically highlight the next message and remove the "unread" bullet next to the message. This is version 7.1. Is there a way tnot to have your messages marked as unread when you haven't read them yet?
You can hit the small flag icon and mark it as unread yourself.
-
Approach for holding the same message and updating the table field Status
Hi,
I have a scenario a (first) proxy asynchronous to JDBC synchronous and then(second) proxy asynchronous.
my first proxy calls sends records (which has a status entry " in process" ) to JDBC it updates or inserts.
JDBC sends a response (may be a count of records updated or inserted)
now i need to handle some how to get the records which have been inserted or updated, so that i can map and change the table entry status field" in process" to " active".
Can i handle this without stored procedures.If so how
Can it be done through BPM where i retain inital mapping or any other solution. please help.Hi Robin,
Ok (but that would be the apt method)
Some other approaches :
1. Make a async scenario (Proxy to DB), which will update or insert records. Write a trigger in DB which will fetch updated/inserted records and send it to XI. Then you update them in R/3 (via proxy). So you will have two async interfaces (one is Proxy to DB and other one DB to Proxy)
2. go for BPM. Receive (from proxy), transform sync send, transform send (to proxy) . I will not prefer this as it will be a performance hinderance.
Regards
Suraj -
Experiencing similar issues on both imac and power book: after replacing an original airport extreme with a new airport extreme both computers display a black box msgs that reads: "...turn off your computer by holding down the power button and or the reset button for a few seconds and then restart your computer."...
one of the printers are usb'd to the imac. The printer is not "seeing" the imac nor will it print wireless from the powerbook which was the norm prior to the upgrade on the airport extreme.
Upon restart, the imac does not "see" the wireless keyboard or the mouse until it is "found" again.
At this time the imac or the powerbook can get on line.It sounds like your computer is getting Kernel Panics. Please look at About "You need to restart your computer" (kernel panic) messages and if the message seen on your display is like the one in the link then you have confirmed you had a KP. KP's can be tough to track down because they can be caused by software or hardware. The first place to start is to post the complete crash log so we can look at it, often there are clues in the log. You can find it at:
/Library/Logs/DiagnosticReports -
I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts. The persons name is not in my contacts and I would like to delete it from popping up. Do you know how I can do this?
The Mail app on the iPad/iPhone/iPod Touch does have an option to clear previous recipients. You can learn to live with it. But if you want to get rid of it, the only way to remove these cached email addresses from the Mail application is restoring the iPhone/iPod Touch as a new phone/iPod. If you restore from backup, the cache is also restored.
This article shows you the screens you will see during the restore: http://support.apple.com/kb/HT1414 -
I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?
Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
Operating System
Default location of iTunes library
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\iTunes\
Microsoft Windows Vista
\Users\[your username]\Music\iTunes\
Microsoft Windows 7
\Users\[your username]\My Music\iTunes\
... and open the iTunes library you find in there. -
"Message is used to carry data between the BlackBerry handheld and an associated server"
Hi everyone,
I'm a first time poster!
I've been receiving about a 100 of these emails everyday for over a week now!
Bell mobility and Bell ISP both say it's not their issue or problem to fix and told me to contact the other!
The e-mails are orginating from:
[email protected]
Any suggestions?
Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This message is used to carry data between the BlackBerry handheld and an
associated server. Please do not delete, move or respond to this message - it
will be processed by the server.
BEGINETP 116
AdxV+90AAAAAIBAIMzAzQUM3MUQgGWZyaXp6ZWxsQHBlaS5zeW1wYXRpY28uY2EAI/HrYFAF
Q01JTUUDQICAgIAyAAAwOENGOEQ3NkIrRysxALbQEVSv1zvyA8fJF15bAW0AGb/C87pyXKXe
k+KxQN/Inek!
ENDETP 70196029
Message Edited by Frazzledazzle on 09-17-2009 11:44 AMHI and Welcome to the forums!
Here are several KB's that discuss the issue...hopefully one of them has what you need:
KB04254 Network@etp email messages arrive on the BlackBerry smartphone
KB10289 What is a Network@etp message
KB13551 Receiving both email messages and network@etp email messages on the BlackBerry Smartphone
KB12643 ETP messages are not deleted from the Inbox after delivery to the BlackBerry smartphone
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How the Payload Message and Logs are stored in the B1i Database Table: BZSTDOC
I would appreciate it if someone could provide any documentation regarding B1i database further maintenance.
for example:
I want to know how the payload message and logs are stored in the table BZSTDOC, and how can we retrieve the payload message directly from the column DOCDATA.
As described in the B1iSNGuide05 3.2 LogGarbageCollection:
to avoid the overload of the B1i Database, I set the Backup Buffer to 90 days : so this means Message Logs from the last 90 days will always be available, but is there some way we can save those old messages to a disk so that I can retrieve the payload message anytime?
in addition, let’s assume the worst, the B1iSN server or the B1i database damaged, Can we just simply restore the B1i database from a latest backup DB then it can work automatically after the B1iSN server is up and running again?
BR/JimDear SAP,
Two weeks passed, I still haven't received any feedback from you guys.
Could you please have a look at my question?
How is this Question going? Is it Untouched/Solving/Reassigned ? -
I can't open my iPod Touch - tried the restore message and then error mewssage 3014 - iOS problems???
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?
Margaret
Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
1. The usual Premiere Elements 8 drill.
a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
Apple - QuickTime - Download
2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
a. Is computer opitimized, defragmented, etc.
CCleaner - PC Optimization and Cleaning - Free Download
b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
3. Project Specifics
For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
Video
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
Photos
Pixel dimensions and how many photos?
Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
ATR -
Can anyone recommend and app for ipad mini to run excel documents offline and let the files be saved ot the ipad hard drive. I am frequently out of network range and need to be able to run the sheets.
All of the "Office" document editing applications on the iPad have limitations. Best try them out to see if they meet your needs.
iWork by Apple
Keynote
Numbers
Pages
DocsToGo
• VIEW/EDIT/CREATE Word & Excel files(Office 2007/2008/2010)
• VIEW PowerPoint, PDF, iWork, Text, .RTF, and more!
• Send & receive attached supported documents using the built-in Mail app
• FREE desktop application with your purchase! Compatible on Win & Mac allows you 2-way file sync with a WIFI connection.
• Open & Edit files within DocsToGo from any 3rd party app that supports the “Open In” feature
• Supports iTunes File Sharing via USB cable for manually moving files
https://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
Office² HD
"Office² HD, the most intuitive and straightforward office document editor available on the iPad, makes it easy to open, view, create and edit Word (DOC & DOCX), Excel (XLS & XLSX), and PowerPoint (PPT & PPTX) files right from your iPad!"
https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Quickoffice Pro HD
Create and edit ALL Microsoft® Office -- document, spreadsheet, and presentation formats, as well as view PDF files, on the go. Our advanced file manager lets you manage local files, access Google Drive or other cloud accounts, and works with your iPad email attachments so you can work anywhere, anytime - online and offline.
https://itunes.apple.com/us/app/quickoffice-pro-hd-edit-office/id376212724?mt=8
nsdjoey presents ways to edit office documents in this web page:
https://discussions.apple.com/message/21953221#21953221 -
Hi,
My name is Norbert. I am having some difficulties restoring my icloud back up. My ipad was doing an icloud back up and the alert message displayed on the ipad after my internet was interrupted "A wi-fi connection is required to download your apps and media".
I got the internet working, my ipad is receiving internet network but the alert message is still displayed on the ipad and won't go away, to make matters worse the ipad is frozen and i can't do anything.
Please can anyone with a similar experience tell me what to do in this situation?
Thank youWelcome to the Apple Community.
Have you tried a hard restart. Press the on/off button and homescreen buttons together until the device shuts down. -
I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?
I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.
Maybe you are looking for
-
Hard disk malfunction, what's the next step?
After I upgraded to Tiger version 10.4.9, my PB would boot more slowly each time, but would eventually make it to the desktop. Thinking it was software related, I ran Applejack, which said the directory was corrupt. In another discussion topic, I was
-
HP Photosmart Plus B210a all-in-one won't display any networks in the list.
Hi, I recently purchased a HP Photosmart Plus all in one printer and I've been having trouble with it from day one. First off, it won't connect wirelessly. It won't display any networks in the list when searched for, it won't take my network details
-
I have a MacBook Pro and a new iMac. The Text on the iMac is a little bit blurry compared to the text in the MacBook Pro (Core Dual 1). Any suggestions would be appreciated. I tried to switch off the zoom feature but it did not improve the text rende
-
PORTAL MULTI-LINGUAL AND CHANGE LANGUAGE PROBLEM
I need to implement language change in portal. I can't use the standard Set Language portlet, because my language change mechanism should involve redirection to an other portal page. Is there any API I can use to implement language change behavior? (
-
Synchronization manage - REPLICATION_UNITS
hi i'm try to install Maxdb synchronization manager with a version 7.7.06.09, but when start syncservice appear an error like this NFO: starting administration thread at port 7223 ... INFO: ... done. SQLException -4004: [-4004] (at 279): Unknown tabl