Archiso build failing due to dbus and dbus-core conflict
I am trying to build an ISO with archiso (releng), and even after running
pacman -R dbus
and
pacman -Syu
the build fails with the following error:
[root@sados releng]# ./build.sh -N SadOS -V 1.0 -L SADOS_1.0 -v build single
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: init
[mkarchiso] INFO: Architecture: i686
[mkarchiso] INFO: Working directory: work/i686
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Pacman config file: work/i686/pacman.conf
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: install
[mkarchiso] INFO: Architecture: i686
[mkarchiso] INFO: Working directory: work/i686
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Pacman config file: work/i686/pacman.conf
[mkarchiso] INFO: Packages: memtest86+ mkinitcpio-nfs-utils nbd
[mkarchiso] INFO: These packages are already installed, skipping.
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: install
[mkarchiso] INFO: Architecture: i686
[mkarchiso] INFO: Working directory: work/i686
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Pacman config file: work/i686/pacman.conf
[mkarchiso] INFO: Packages: arch-install-scripts b43-fwcutter btrfs-progs crda darkhttpd ddrescue dhclient dialog dmraid dnsmasq dnsutils dosfstools elinks ethtool fsarchiver gnu-netcat gptfdisk grml-zsh-config grub-bios haveged hdparm ipw2100-fw ipw2200-fw irssi lftp lilo linux-atm mc mtools nfs-utils nilfs-utils nmap ntfs-3g ntfsprogs ntp openconnect openssh openvpn partclone parted partimage pptpclient rfkill rp-pppoe rsync smartmontools speedtouch sudo tcpdump testdisk usb_modeswitch vpnc wget wireless_tools wpa_actiond wvdial xl2tpd zd1211-firmware zsh abiword abiword-plugins aircrack-ng alsaplayer arch-firefox-search archiso ario audacious audacity aurphan autoconf automake autotrace avogadro-git bash binutils bison bittwist bleachbit blender bluez burp bzip2 ccd2iso ccsm cdrtools chaosreader cheese clonezilla compiz-decorator-gtk compiz-manager compizconfig-backend-gconf conky coreutils cowpatty crashtest cronie cryptsetup dbus ddrescue device-mapper dhcpcd dia dictd diffutils dosbox dosfstools driftnet e2fsprogs ekiga electricsheep elinks emerald-themes ettercap exo fakeroot fcgi festival festival-english festival-us file filesystem filezilla findutils firefox flamerobin flashplugin flex fluidsynth font-bh-ttf foremost fortune-mod frei0r-plugins ftplib fwknop fyre garcon gawk gcc gcc-libs gdm geany geany-plugins gedit gedit-plugins gerix-wifi-cracker-ng gettext ghex gimp gimp-dbp gimp-gap gksu glibc gnofract4d gparted grep grsync grub-bios gthumb gtk-aurora-engine gtk-recordmydesktop gtk2-xfce-engine gtk3-xfce-engine guake gucharmap guifications gvfs-afc gzip hasciicam heirloom-mailx hexcurse htop idesk inetutils inkscape iproute2 iputils irssi java3d jfsutils johnny-git jre7-openjdk kismet less libdvdcss libgoom2 libmysqlclient libtool licenses lighttpd links linux logrotate lvm2 lynx m4 macchanger make makehuman man-db man-pages mandelbulber mdadm menumaker meshlab mktorrent mlocate mpd mplayer mypaint nano ncdu ncftp ncmpcpp netcfg network-manager-applet networkmanager nmap nss-myhostname obconf obkey oblogout obmenu openbox openbox-themes openssh orage os-prober oxygen-gtk2 oxygen-icons p7zip pacman paraview pastebinit patch pciutils pcmciautils perl php php-cgi pidgin pidgin-encryption pidgin-gfire pidgin-hotkeys pidgin-musictracker pidgin-otr pkg-config povray ppp procps-ng projectm psmisc pyqt python-distribute python2-distribute qwt reiserfsprogs ristretto rrdtool rsnapshot rtorrent safecopy screen sed shadow sitecopy skype slim slim-themes smbclient sox spideroak sslsniff sslsniffer steghide stress structuresynth sudo sweethome3d sysfsutils syslinux systemd-sysvcompat tar tcpdump tcpick terminal terminator testdisk texinfo thc-hydra thunar thunar-archive-plugin thunar-media-tags-plugin thunar-volman tightvnc tk tmux tomboy traceroute transmission-cli transmission-gtk ttf-cheapskate ttf-dejavu ttf-droid ttf-freefont ttf-gentium ttf-inconsolata ttf-liberation ttf-linux-libertine tumbler unetbootin unionfs-fuse usbutils util-linux vi videosnarf vim vlc vte3 wget which wicd wireshark-cli wireshark-gtk wtf x11vnc xaos xcursor-bluecurve xcursor-themes xf86-input-evdev xf86-input-joystick xf86-input-keyboard xf86-input-mouse xf86-input-synaptics xf86-input-vmmouse xf86-input-void xf86-input-wacom xf86-video-ark xf86-video-ast xf86-video-ati xf86-video-cirrus xf86-video-dummy xf86-video-fbdev xf86-video-geode xf86-video-glint xf86-video-i128 xf86-video-intel xf86-video-mach64 xf86-video-mga xf86-video-modesetting xf86-video-neomagic xf86-video-nouveau xf86-video-nv xf86-video-openchrome xf86-video-r128 xf86-video-savage xf86-video-siliconmotion xf86-video-sis xf86-video-tdfx xf86-video-trident xf86-video-v4l xf86-video-vesa xf86-video-vmware xf86-video-voodoo xfburn xfce4-appfinder xfce4-artwork xfce4-battery-plugin xfce4-clipman-plugin xfce4-cpufreq-plugin xfce4-cpugraph-plugin xfce4-datetime-plugin xfce4-dict xfce4-diskperf-plugin xfce4-eyes-plugin xfce4-fsguard-plugin xfce4-genmon-plugin xfce4-mailwatch-plugin xfce4-mixer xfce4-mount-plugin xfce4-mpc-plugin xfce4-netload-plugin xfce4-notes-plugin xfce4-notifyd xfce4-panel xfce4-power-manager xfce4-quicklauncher-plugin xfce4-screenshooter xfce4-sensors-plugin xfce4-session xfce4-settings xfce4-smartbookmark-plugin xfce4-systemload-plugin xfce4-taskmanager xfce4-time-out-plugin xfce4-timer-plugin xfce4-verve-plugin xfce4-wavelan-plugin xfce4-weather-plugin xfce4-xkb-plugin xfconf xfdesktop xfsprogs xfwm4 xfwm4-themes xorg-bdftopcf xorg-docs xorg-font-util xorg-fonts-100dpi xorg-fonts-75dpi xorg-fonts-encodings xorg-iceauth xorg-luit xorg-mkfontdir xorg-mkfontscale xorg-server xorg-sessreg xorg-setxkbmap xorg-smproxy xorg-x11perf xorg-xauth xorg-xbacklight xorg-xcmsdb xorg-xcursorgen xorg-xdpyinfo xorg-xdriinfo xorg-xev xorg-xgamma xorg-xhost xorg-xinput xorg-xkbcomp xorg-xkbevd xorg-xkbutils xorg-xkill xorg-xlsatoms xorg-xlsclients xorg-xmodmap xorg-xpr xorg-xprop xorg-xrandr xorg-xrdb xorg-xrefresh xorg-xset xorg-xsetroot xorg-xvinfo xorg-xwd xorg-xwininfo xorg-xwud xosd xprobe2 xsane xscreensaver youtube-dl
[mkarchiso] INFO: Installing packages to 'work/i686/root-image/'...
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
custom is up to date
warning: bash-4.2.039-1 is up to date -- skipping
warning: bzip2-1.0.6-4 is up to date -- skipping
warning: coreutils-8.20-1 is up to date -- skipping
warning: cronie-1.4.9-1 is up to date -- skipping
warning: cryptsetup-1.5.1-1 is up to date -- skipping
warning: skipping target: ddrescue
warning: device-mapper-2.02.98-3 is up to date -- skipping
warning: diffutils-3.2-1 is up to date -- skipping
warning: skipping target: dosfstools
warning: e2fsprogs-1.42.6-1 is up to date -- skipping
warning: skipping target: elinks
warning: file-5.11-1 is up to date -- skipping
warning: filesystem-2012.12-1 is up to date -- skipping
warning: findutils-4.4.2-4 is up to date -- skipping
warning: gawk-4.0.1-1 is up to date -- skipping
warning: gcc-libs-4.7.2-2 is up to date -- skipping
warning: gettext-0.18.1.1-4 is up to date -- skipping
warning: glibc-2.16.0-5 is up to date -- skipping
warning: grep-2.14-1 is up to date -- skipping
warning: skipping target: grub-bios
warning: gzip-1.5-1 is up to date -- skipping
warning: heirloom-mailx-12.5-3 is up to date -- skipping
warning: inetutils-1.9.1-4 is up to date -- skipping
warning: iproute2-3.6.0-2 is up to date -- skipping
warning: iputils-20121126-1 is up to date -- skipping
warning: skipping target: irssi
warning: jfsutils-1.1.15-3 is up to date -- skipping
warning: less-451-1 is up to date -- skipping
warning: licenses-2.9-1 is up to date -- skipping
warning: linux-3.6.9-1 is up to date -- skipping
warning: logrotate-3.8.2-2 is up to date -- skipping
warning: lvm2-2.02.98-3 is up to date -- skipping
warning: man-db-2.6.3-1 is up to date -- skipping
warning: man-pages-3.44-1 is up to date -- skipping
warning: mdadm-3.2.6-1 is up to date -- skipping
warning: nano-2.2.6-2 is up to date -- skipping
warning: netcfg-3.0-1 is up to date -- skipping
warning: skipping target: nmap
warning: nss-myhostname-0.3-3 is up to date -- skipping
warning: skipping target: openssh
warning: pacman-4.0.3-5 is up to date -- skipping
warning: pciutils-3.1.10-1 is up to date -- skipping
warning: pcmciautils-018-4 is up to date -- skipping
warning: perl-5.16.2-1 is up to date -- skipping
warning: ppp-2.4.5-5 is up to date -- skipping
warning: procps-ng-3.3.5-1 is up to date -- skipping
warning: psmisc-22.19-1 is up to date -- skipping
warning: reiserfsprogs-3.6.21-4 is up to date -- skipping
warning: sed-4.2.1-4 is up to date -- skipping
warning: shadow-4.1.5.1-2 is up to date -- skipping
warning: skipping target: sudo
warning: sysfsutils-2.1.0-8 is up to date -- skipping
warning: syslinux-4.06-1 is up to date -- skipping
warning: systemd-sysvcompat-196-2 is up to date -- skipping
warning: tar-1.26-2 is up to date -- skipping
warning: skipping target: tcpdump
warning: skipping target: testdisk
warning: texinfo-4.13a-7 is up to date -- skipping
warning: usbutils-006-1 is up to date -- skipping
warning: util-linux-2.22.1-3 is up to date -- skipping
warning: vi-1:050325-3 is up to date -- skipping
warning: skipping target: wget
warning: which-2.20-5 is up to date -- skipping
warning: xfsprogs-3.1.8-2 is up to date -- skipping
resolving dependencies...
looking for inter-conflicts...
:: dbus and dbus-core are in conflict. Remove dbus-core? [y/N]
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: dbus and dbus-core are in conflict
Help, please? Thanks.
aesiris wrote:Did you add dbus-core inside releng/packages.* ?
If yes, remove it and leave only dbus
No, neither of them were in packages.i686. I even tried adding dbus to that file to see if it would help, but it didn't change the error message.
It seems like archiso is installing some core files before it installs my custom packages, and maybe that is where the problem lies, but I really have no idea.
Similar Messages
-
[SOLVED] conky-lua build fails due to toluapp package issues
I am trying to install conky-lua from AUR on 64 bit Arch and failing miserably.
When running the following:
yaourt -Sy conky-lua
I get the following error:
/usr/bin/ld: /usr/lib/gcc/x86_64-unknown-linux-gnu/4.4.2/../../../../lib/libtolua++.a(tolua_is.o): relocation R_X86_64_32S against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.4.2/../../../../lib/libtolua++.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
make[1]: *** [libcairo.la] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-mark/aur-conky-lua/conky-lua/src/conky-1.7.2/lua'
make: *** [all-recursive] Error 1
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build conky-lua package.
I have read through what search results I can find on the topic (both here and via google) and have attempted to remedy the situation by adding build options to the toluapp build to provide for the conky-lua build. I have tried this by adding CCFLAGS = '-fPIC' to the scons call in the PKGBUILD file, I have also tried editing the config_linux.py file, which sits along side the main build file, to include the -fPIC switch also, which doesn't work either. i.e. I have this in the config_linux.py now:
CCFLAGS = ['-O2', '-ansi', '-Wall', '-fPIC']
Which doesn't work, it results in:
==> Validating source files with md5sums...
tolua++-1.0.93.tar.bz2 ... Passed
config_linux.py ... FAILED
==> ERROR: One or more files did not pass the validity check!
Error: Makepkg was unable to build toluapp package.
Can someone help me through a build as I have never come across scons before and maybe I am providing directives to the toluapp build incorrectly? I am still thinking in "make" terms...
I NEED lua in conky
Thanks in advance
Regards,
Kaivalagi
Last edited by kaivalagi (2009-11-11 07:32:04)I was asked by email on what exactly I did to get conky-lua installed and working on 64bit Arch, so I thought I would post my reply below in case it is of help to anyone else. Cheers
Run "yaourt -S conky-lua". Amongst other things this will try to install a dependancy which you need to mess about with, the package you need to edit is "toluapp".
When the "toluapp" package is downloaded by yaourt answer y to the edit question and provide something like gedit or kate as the editor to use
You'll now see the PKGBUILD file in the editor, this doesn't need editing just yet. But if you open file from the editor you'll see the directory thie PKGBUILD is in, and you want to edit the config_linux.py file you'll see there.
You should see this line in the config_linux.py file:
CCFLAGS = ['-O2', '-ansi', '-Wall']
Change it so it is like this:
CCFLAGS = ['-O2', '-ansi', '-Wall', '-fPIC']
Now, back to the PKGBUILD file, you'll see this line:
md5sums=('100aa6907b8108582080b37d79c0afd7' 'bab107cdd2d18d3453a2344341b77c45')
These checksums line up with tarball and config_linux.py files, and this will stop you're edit from working if not amended because the .py file isn't what it should be, we changed it. So run md5sum against the .py file and update the second checksum in the line appropriately.
Carry on with the package installation and conky should have lua support
Last edited by kaivalagi (2010-01-14 08:50:55) -
Build failed due to - org/apache/xml/dtm/ObjectFactory$ConfigurationError
Hi,
Webcenter spaces deployment fails with the following error:
BUILD FAILED
weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 7 failed: [Deployer:149026]redeploy application webcenter on WLS_Spaces.
Target state: redeploy failed on Server WLS_Spaces
java.lang.NoClassDefFoundError: org/apache/xml/dtm/ObjectFactory$ConfigurationError
I am using JDev 11.1.1.3.0 with webcenter extension. Does any other extension is required to rectify this ?
Thanks & Regards.I'v placed the xsltc.jar into the location specified C:\Oracle\Middleware\jdeveloper\ant\lib
But still it is not working and I am getting this error , don't know why. I am using Jdeveloper 11g 11.1.1.3.0.
I am trying to build the extend webcenter spaces sample from Oracle.com website
The stack trace is like ....
BUILD FAILED
weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 58 failed: [Deployer:149026]redeploy application webcenter on WLS_Spaces.
Target state: redeploy failed on Server WLS_Spaces
java.lang.NoClassDefFoundError: org/apache/xml/dtm/ObjectFactory$ConfigurationError
at weblogic.Deployer.run(Deployer.java:72)
at weblogic.Deployer.mainWithExceptions(Deployer.java:62)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy.java:419)
at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.java:349)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor11.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.Main.start(Main.java:179)
at org.apache.tools.ant.Main.main(Main.java:268)
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 58 failed: [Deployer:149026]redeploy application webcenter on WLS_Spaces.
Target state: redeploy failed on Server WLS_Spaces
java.lang.NoClassDefFoundError: org/apache/xml/dtm/ObjectFactory$ConfigurationError
at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:542)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
... 23 more
Total time: 25 seconds -
DC Build failed due to used WD Components
Hello All,
I have used few web dynpro components in "used web dynpro components" in my DC. When I build the DC, it gives me the following error
[wdgen] ERROR: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to parse XML document containing VMO=com.pg.dc_utils.components.buyercodesearchcomp.BuyerCodeSearchComp., C:/Documents and Settings/283818/.dtc/0/t/CA1424309DCE741FB83B7DE1E71CAA69/gen_wdp/configuration/Components/com.pg.dc_oachanges.components.oachangescomp.OAChangesComp/OAChangesComp.xml
As soon as I remove the used web dynpro components, the rrror goes off and the DC builds fine. I want to use those WD Components in my DC
How do I resolve this ?
Regards
MrinaliniSome one resolved this problem as given in this link. But I don understand exactly what he/she did. Please read the following post to get an idea of the problem
Urgent : Generation of file "application".xml fails and deploys aborted
It talks about adding views in the views list and in the components list . How do we do that ?
Regards
Mrinalini -
App builder fails due to undefined target
I have generated a build in LV8.5. I get an error when you try to run the install. Says that the target is undefined. I have (I think) defined it like i always did in the past (recent upgrade from 8.2). I am fouled somehow and cannot find why. I can send the whole project to someone for evaluation.
Thanks
Jim Stevens
Menard Engine GroupHi,
Yes, the app runs fine after the build. The application build seems to finish OK as well. Just when you run the install setup do you get the error. I hopefully have attached a shot of the error.
The app was done originally in 8.5 (is a new project). We have done several applications in the past with sucess. I think this is the first time in 8.5. In 8.2 we did several.
J. Stevens
Menard Engine Group
Attachments:
error.jpg 17 KB -
They are both in daemons...and for /etc/rc.d/hal restart it faisl same with dbus and with using 'start' instead of 'restart'.
/usr/sbin/hald --daemon=no --verbose=yes gives me this:
/usr/sbin/hald --daemon=no --verbose=yes
14:31:01.105 [i] hald.c:532: hal 0.5.9
14:31:01.106 [i] hald.c:597: Will not daemonize
14:31:01.106 [i] hald_dbus.c:4806: local server is listening at unix:abstract=/var/run/hald/dbus-JQyZPmcfA6,guid=4867547682ff4e78d054ad0046608205
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
14:31:01.112 [i] hald_runner.c:299: Runner has pid 5829
14:31:01.113 [W] ci-tracker.c:200: Could not get uid for connection: org.freedesktop.DBus.Error.NameHasNoOwner Could not get UID of name 'org.freedesktop.DBus': no such name
14:31:01.116 [E] hald_dbus.c:4461: Cannot get caller info for org.freedesktop.DBus
14:31:01.116 [i] hald_runner.c:180: runner connection is 0x8091888
14:31:01.117 [i] mmap_cache.c:251: cache mtime is 1180561064
Error binding udev_event socket: Address already in use
And when trying to start dbus with /etc/rc.d/dbus restart i get this when it fails:
Failed to start message bus: Failed to bind socket "/var/run/dbus/system_bus_socket": Address already in use
Any suggestions?If you think it's a common problem how about filing a bug report. Would likely help more people than just posting in the forum. Just a suggestion.
-
(SOLVED) Hal and dbus, do I need dbus?
I read the wiki and it says if I don't use hal in my daemons then I need to add dbus.
I haven't been using hal, and I haven't added dbus either. My system seems to be working right, but I guess something could be wrong. Reading the wiki brings me here to ask if I need dbus and why?
My daemons,
DAEMONS=(@syslog-ng @network !netfs @alsa @mpd @crond)
Last edited by Google (2010-07-03 11:21:11)sudo pacman -R dbus
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: avahi: requires dbus>=1.1.20-1
:: awesome: requires dbus
:: gconf: requires dbus
:: qt: requires dbus
I assume I should add it to daemons?
Last edited by Google (2010-07-03 10:08:18) -
Kde authorization (polkit and dbus driving me insane)
hi,
apologies if this is complete newbie territory, but it's been a long time since i last used linux as a desktop OS so polkit and dbus are all new to me.
the problem, basically, is that KDE won't let me do anything i would consider privileged. network manager applet won't let me change wifi connections, package manager doesn't work and usb disks won't mount.
let's start with usb disks. i added a polkit rule as per the wiki:
[root@mjollnir rules.d]# cat 10-enable-mount.rules
polkit.addRule(function(action, subject) {
if (action.id == "org.freedesktop.udisks2.filesystem-mount-system" && subject.isInGroup("storage")) {
return polkit.Result.YES;
and i am in the storage group:
$ groups
wheel network audio storage power
but i get the following error when i try to open a newly inserted usb disk in dolphin:
Error checking authorization: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: Action org.freedesktop.udisks2.filesystem-mount is not registered (polkit-error-quark, 0)
and now for network manager -
running nm-applet from a terminal and trying to change wifi connection gives me this:
** (nm-applet:1369): WARNING **: Could not create object for /org/freedesktop/NetworkManager/Settings/0: No session found for uid 1000 (unknown)
** (nm-applet:1369): WARNING **: Could not create object for /org/freedesktop/NetworkManager/Settings/3: No session found for uid 1000 (unknown)
** (nm-applet:1369): WARNING **: handle_property_changed: failed to update property 'available-connections' of object type NMDeviceWifi.
(nm-applet:1369): nm-applet-WARNING **: Error connecting to ModemManager: Error calling StartServiceByName for org.freedesktop.ModemManager1: GDBus.Error:org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
(nm-applet:1369): nm-applet-WARNING **: Failed to register as an agent: (32) Session not found
(nm-applet:1369): nm-applet-WARNING **: Failed to register as an agent: (32) Session not found
(nm-applet:1369): nm-applet-WARNING **: Failed to add/activate connection: (32) No session found for uid 1000 (unknown)
finally, launching apper from the terminal:
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
i do have dbus processes running under my userid, so i think i have a session but i'm not really sure what i'm looking for, and learning the complete ins and outs of dbus is more than a little daunting for what should be a relatively simple task!
can anyone point me in the right direction to start figuring this out? i'm currently seriously considering a complete reinstall but i'm not sure i have the time for that, especially since i don't know if it would necessarily solve the problem
fwiw, i booted a mint livecd and all this stuff worked fine so it's not my hardwareSorry for being vague - i understand it's not easy dealing with newbies i'll try to be clearer!
I was running kdm as root, then logging in as a regular user. I've now enabled the kdm systemctl service as per mariusmeyer's instructions, but it didn't change what happens when i insert a USB disk - same error as before.
command output below (username redacted)
$ loginctl show-session $XDG_SESSION_ID
Id=c2
Name=XXX
Timestamp=Mon 2014-04-14 20:06:49 BST
TimestampMonotonic=41104959
VTNr=7
Display=:0
Remote=no
Service=kde
Scope=session-c2.scope
Leader=434
Audit=0
Type=x11
Class=user
Active=yes
State=active
IdleHint=no
IdleSinceHint=0
IdleSinceHintMonotonic=0
and systemctl output
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2deDP\x2d1-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-eDP-1/intel_backlight
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb-sdb1.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb-sdb2.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb-sdb3.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d1-1\x2d1:1.0-host3-target3:0:0-3:0:0:0-block-sdb.device loaded active plugged micro_USB Linux_Mint_16_Cinnamon_64-bit
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d7-1\x2d7:1.0-bluetooth-hci0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0/rfkill2
sys-devices-pci0000:00-0000:00:14.0-usb1-1\x2d7-1\x2d7:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged Lynx Point-LP HECI KT
sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged Ethernet Connection I218-LM
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged Lynx Point-LP HD Audio Controller
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill1.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill1
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Dual Band Wireless-N 7260
sys-devices-pci0000:00-0000:00:1c.4-0000:04:00.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.4/0000:04:00.0/backlight/acpi_video1
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged Crucial_CT480M500SSD1 1
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged Crucial_CT480M500SSD1 2
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged Crucial_CT480M500SSD1 3
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged Crucial_CT480M500SSD1
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-rfkill-rfkill0.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill0
sys-devices-platform-thinkpad_acpi-sound-card1.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card1
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-enp0s25.device loaded active plugged Ethernet Connection I218-LM
sys-subsystem-net-devices-wlp3s0.device loaded active plugged Dual Band Wireless-N 7260
-.mount loaded active mounted /
boot-efi.mount loaded active mounted /boot/efi
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
run-user-0.mount loaded active mounted /run/user/0
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-c1.scope loaded active running Session c1 of user root
session-c2.scope loaded active running Session c2 of user mcgoldrickm
bluetooth.service loaded active running Bluetooth service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
kdm.service loaded active running K Display Manager
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
NetworkManager.service loaded active running Network Manager
ntpd.service loaded active running Network Time Service
pdnsd.service loaded active running proxy name server
polkit.service loaded active running Authorization Manager
rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video1
systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:intel_backlight
systemd-hostnamed.service loaded active running Hostname Service
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill1
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill2
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for UID 0
[email protected] loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-systemd\x2dbacklight.slice loaded active active system-systemd\x2dbacklight.slice
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.slice
system.slice loaded active active System Slice
user-0.slice loaded active active user-0.slice
user-1000.slice loaded active active user-1000.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda3.swap loaded active active /dev/sda3
basic.target loaded active active Basic System
bluetooth.target loaded active active Bluetooth
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
113 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'. -
[SOLVED] X-Autostart, Auto-log-in and DBus : a non-pulseaudio issue
Hello,
besides the not-so-clear title, I've been investigating for what first looked like a pulseaudio problem for a while, and I'm now sharing what I found with you :
Pre-existing conditions
An Arch system with systemd, auto-loggin on a TTY and auto-start of X
Symptoms
Pulseaudio wouldn't start anymore at boot, but everything worked fine if it was started a while after, provided one would have sudo killall -9 pulseaudio before, and there was no major upgrade that could be related to this change.
Journalctl showed dbus related messages, saying that pulse wasn't able to find it, and a general failure in main.c start.
Solution
Actually, a part of the boot process was the following :
|-----> lots of things, and at a point dbus
Init --> |
|-----> auto-logging service (getty stuff) -----> .xinitrc ------> pulseaudio
and there was no guarantee that dbus was already started when pulse audio was.
To add this guarantee, edit your autologging service and add the following
[Unit]
... your stuff ...
#lines to add :
Requires=dbus.Service #I'm not sure this one is needed, if anyone here can confirm it
After=dbus.Service
..rest of the file..
reboot, and enjoy
Last edited by NougatRillettes (2012-12-30 16:05:02)I know this is an older post, but I'm hoping by bumping it someone will be able to help me with this issue even though the thread is marked as [SOLVED], so that I won't have to create a new post.
I'm trying to set up a host to autologin a user, then automatically startx to enter a desktop environment. I am using these guides:
https://wiki.archlinux.org/index.php/au … al_console
https://wiki.archlinux.org/index.php/Start_X_at_Login
I haven't yet set up the startx at login, but I've done that before, so I don't expect any issues or problems.
I successfully set up autologin using the first link and everything seemed fine. However, on the startx at login wiki, it states:
Tips
This method can be combined with automatic login to virtual console. When doing this you have to set correct dependencies for the autologin systemd service to ensure that dbus is started before ~/.xinitrc is read and hence pulseaudio started (see: BBS#155416)
I don't have pulseaudio issues to worry about, but I do have an exec line to start lxde. So, I followed that link to this thread and created the lines NougatRillettes suggested. Here's the complete file:
/etc/systemd/system/[email protected]/autologin.conf
[Unit]
Requires=dbus.Service
After=dbus.Service
[Service]
ExecStart=
ExecStart=-/usr/bin/agetty --autologin <username> --noclear %I 38400 linux
Then, when I reboot the kernel spits this out:
Nov 06 14:39:23 [Host] systemd[1]: Set hostname to <[Host]>.
Nov 06 14:39:23 [Host] systemd[1]: [/etc/systemd/system/[email protected]/autologin.conf:2] Failed to add dependency on dbus.Service, ignoring: Invalid argument
Nov 06 14:39:23 [Host] systemd[1]: [/etc/systemd/system/[email protected]/autologin.conf:3] Failed to add dependency on dbus.Service, ignoring: Invalid argument
Nov 06 14:39:23 [Host] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
I rechecked the wikis and noticed:
Tips & Tricks
Avoiding unnecessary dmesg errors
To avoid errors related to display-manager.service in dmesg, you should set the default target to multi-user instead of graphical:
# systemctl enable multi-user.target
So I went ahead and enabled multi-user.target and rebooted, thinking that would solve the problem, but it didn't...the error messages were the same.
I'm hoping someone can help...and maybe update those two wikis if there's any information missing. I'm also wondering if I should reverse the last step I described by disabling multi-user.target. -
[SOLVED]dbus and systemd: "systemctl --user" gets "Connection refused"
Hi,
I want to enable some systemd user service. Here is what I get
$ LANG=C systemctl --user
Failed to get D-Bus connection: Connection refused
$ echo $DBUS_SESSION_BUS_ADDRESS
unix:abstract=/tmp/dbus-RboLZS2wF3,guid=feb8bd85248906d12a826acd54e3c4ad
I don't believe I've ever touched dbus, so I'm a bit lost. There's the following line in my ~/.xinitrc:
exec dbus-launch xmonad
Seems like I'm not the only one with trouble on that topic, but I could not solve my problem.
Additional resources:
1. relevant pstree information
systemd-+-acpid
|-at-spi-bus-laun-+-dbus-daemon
| |-{dconf worker}
| |-{gdbus}
| `-{gmain}
|-3*[dbus-daemon]
|-dbus-launch
|-login---startx---xinit-+-Xorg
| `-xmonad-x86_64-l-+-tons
| |-of
| |-stuff
|-polkitd-+-{JS GC Helper}
| |-{JS Sour~ Thread}
| |-{gdbus}
| |-{gmain}
| `-{runaway-killer-}
|-systemd---(sd-pam)
|-systemd-journal
|-systemd-logind
|-systemd-udevd
2.
$ pgrep -af systemd
1 /usr/lib/systemd/systemd --system --deserialize 16
149 /usr/lib/systemd/systemd-journald
171 /usr/lib/systemd/systemd-udevd
257 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
263 /usr/lib/systemd/systemd-logind
316 /usr/lib/systemd/systemd --user
3.
$ pgrep -af dbus
257 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
385 dbus-launch --sh-syntax --exit-with-session
386 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
459 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
470 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
4. Playing with processus #1
- Killing it doesn't change anything
$ /usr/lib/systemd/systemd --user
Failed to create root cgroup hierarchy: Permission denied
Failed to allocate manager object: Permission denied
$ sudo /usr/lib/systemd/systemd --user
Trying to run as user instance, but $XDG_RUNTIME_DIR is not set.
$ echo $XDG_RUNTIME_DIR
/run/user/1000
$ sudo -i
# XDG_RUNTIME_DIR=/run/user/1000 /usr/lib/systemd/systemd
Startup finished in 41ms. // keeps running
But I still cannot do "systemctl --user"....
Last edited by Laugarhraun (2015-02-18 17:03:57)Heyyy I'm dumb!
$ alias systemctl
alias systemctl='sudo systemctl'
$ LANG=C /usr/bin/systemctl --user
Failed to list units: Process org.freedesktop.systemd1 exited with status 1
New error = progress! yay! -
Hi,
I am extensively using Fixed point math library functions which i have downloaded from NI website in my FPGA application.I am getting following errors while compiling the code.
I would like to know is there any limitations in using fixed point functions?
I am configuring all funtions as a 64 bit word length and 32 bit integer length in cofig parameter set up and all are outside the timed loop.
Apart from below error it is occupieng LUT's 300% in one simple VI (mathematical calculations using fixed point functions).
So i would like to know is there any way to optimize the code?.
Status: Compilation failed due to timing violations.
The compile process reported a timing violation.
Suggestions for eliminating the problem:
* For Timed Loops with timing violations
- Reduce long arithmetic/combinatorial paths
- Use pipelining within Timed Loops
- Reduce the number of nested case structures
* Reduce clock rates if possible
* Recompile
Refer to the LabVIEW Help for more information about resolving compilation errors. Click the Help button to display the LabVIEW Help.
Compilation Summary
Device Utilization Summary:
Number of BUFGMUXs 2 out of 16 12%
Number of External IOBs 214 out of 484 44%
Number of LOCed IOBs 214 out of 214 100%
Number of MULT18X18s 69 out of 96 71%
Number of SLICEs 4387 out of 14336 30%
Clock Rates: (Requested rates are adjusted for jitter and accuracy)
Base clock: 40 MHz Onboard Clock
Requested Rate: 40.408938MHz
Achieved Rate: 36.974044MHz <<<=== Timing Violationlion-o wrote:
The Fixed Point Library is certainly not a demo, and we encourage you to use it extensively.
Really? "Demo" is perhaps too strong a word, but the NI Labs page says that the toolkits there "aren't quite ready for release" and are "experimental prototype"s. My understanding was that they work, but are only meant to show potential future products and get feedback on them. If this is not the case, perhaps the wording needs to be changed.
I know I wouldn't want to be using something throughout my code and then find out that it is not supported when the next LV version came out because it was only a prototype. Can you promise support into the future for these? If you can't, that should be clearly stated.
Try to take over the world! -
My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.
Hello,
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over. -
Exporting pdf and said failed due to password protected--what to do?
I'm trying to export a pdf file and i get a 'conversion failed due to password protection'? i do not recall putting a password for any of my conversions.
Hi TSN,
Thank you, that is correct - an unprotected PDF would be best.
Although if that isn't available due to time constraints, you will have full access to convert the PDF to Word if you have the correct password. You will just need to be sure to enter it directly into the PDF before you do the conversion.
Hope that helps!
Regards, Stacy -
I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome
Export the photos to a desktop folder, right click on the folder and burn to disk - see if that is any different
LN -
my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my accountThat has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes
Maybe you are looking for
-
Because each library is named "iTunes Music" anytime I go to bring one library on to the same external harddrive as another it asks me if I want to REPLACE one library with the other. I don't want to do this because each file has different variations
-
How can i change the color of the text bubble in Preview?
Is it possible to change the colour of the text bubble in Preview? In the Help section it seems to indicate you can but following the directions only puts a border around the bubble in the colour you have chosen. The interior colour of the bubble d
-
ok - my ipod touch is stuck on the itunes screen. Have tried shutting it off, plugging it into my windows computer, and it does recognize that it's there. it goes to restore mode, then immediately goes to restore and update. then back to restore
-
How do I make a custom page size in Acrobat X pro?
I downloaded a gigantic trial version of Acrobat X pro to create a full PDF book cover. I was unable to figure out how to make the program do anything at all. The help file and forums did not give me the information I needed. Eventually I was able to
-
Error Code RW:- 50004 During EBS Installation
Hi Friends , While I am Installing Oracle EBS ,it is done upto 20% and Throws an Error RW:50004 :Error Code Received when running external process. ...Please help how to resolve this issue??