Archos 101 tablet listed ok "You do not have any devices"?
I was delighted to learn that you now support this tablet but the Archos Market & Android Market insist "You have no devices" I am able to use Spotify & wish to sync' the tablet with my PC. Hope this is intelligible. Can u help please?
(12 year Firefox user)
Michael Bell
Yes, but without success.
M.B.
Similar Messages
-
I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David -
Webcenter - You do not have any New Start Menus
After importing a site, admin interface of MySites show 'You do not have any New Start Menu'.
I tried to enable all assests:
MySites's admin interface --> admin tab's --> All Sites --> MySites --> this shows only default limited assets, not all of them so I can enable them.
Even import shows success msg with logging of all assets.Hi,
If you are concerned about missing asset types, i.e. you do not see certain asset type(s) in the list of asset types to be enabled, then I would suggest to re-import resources=@ASSET_TYPE:* to your site in question.
If you are concerned about missing startmenu items, see if you can find them in Admin tab > Start Menu > New/Search/New Insite/etc...
If the start menus are there, you will just need to modify the startmenu items and enable them for your site. Alternately, you may also disable and re-enable the corresponding asset type(s), which will ask if you want to enable some existing start menu items for the current site.
If the start menus are not there, I would suggest to re-import resources=@STARTMENU:* to your sites in question.
NOTE: Before re-importing anything from the existing CSDT workspace, you should make sure the resources you are trying to import were correctly exported and exist in your workspace.
Thanks,
Yu-Chun -
You do not have any active subscriptions on which preview features can be enabled.
I can't configure a shared storage to my azure VMs, I follow this and it seems the problem my account is not activated as this message displayed in the Preview Features in my account:
You do not have any active subscriptions on which preview features can be enabled.Hi,
Please try to enable the preview features then try again, refer to this article about how to enable preview features:
http://azure.microsoft.com/en-us/documentation/articles/php-create-account/ , or have a look at this video:
http://channel9.msdn.com/Series/Getting-started-with-Windows-Azure-HDInsight-Service/Enable-a-Windows-Azure-Preview-Feature-video , if this doesn't help you, please contact azure support as Neelesh's post.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
You do not have any Skype Credit to reactivate
I got an email that my credit is inactive and that I can reactivate it. But when I go to the reactivation web page, I ge the message "You do not have any Skype Credit to reactivate". My Skype account is [Redacted for privacy]
Hi, Peter-Konstanz, and welcome to the Community,
When I read messages such as yours, I pause to wonder, might you have another Skype account to which the e-mail was referring? Please double-check that the account dashboard you signed on to is indeed the account where the credit was purchased and that needs to be re-activated. I realize this sounds ridiculous, however I have done things like this before -- so I thought to ask.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
i tryed downloading the package and installing it off the usb port as a download and the file crashed
Except for the Telechips TCC88xx processor series, all of the others are not ARMv7 type of cpu's but say ARMv6 or ARMv5. http://www.telechips.com/eng/Product/Product.asp
It is more of a matter of whether the device has the appropriate hardware (and 512+ MB RAM) versus making mobile Firefox for specific devices, especially if they do not have a ARMv7 type of cpu. -
HT5824 can you unlink a phone that you do not have any more
my ex has my old phone which was an i phone 4 and he says that
he is still attached to my icloud account and wants my password to get in but is there a way to delete that phone from my icloud account and not give him a password.There is this > Remotely erase
From here > http://support.apple.com/kb/PH2696 -
I get this message when I go to the App store and redownload an app I already had. This is after the iOS 5 update.
I get the same thing, I am from Hong Kong and it is the same for both my US account and HK account.
-
I appreciate your help.
Thanks for answering. Sorry for my ignorance and basic knowledge, Chris CA, but
1. I do not want to buy iTunes Match.
2. I thought associating is e. g. necessary when you would like to be able to localise your device via iTunes on your PC.
3. I suppose that the association has something to do with your rights on which devices and PC you can play your downloaded items.
Any clarification is welcome. -
Running Exchange 2010/latest updates on Windows 2008 R2 servers.
When I create a new DL that I want someone to manage, they received the following message when trying to add/remove from the DL:
"changes to the distribution list membership cannot be saved. you do not have sufficient permission to perform this operation on this object"
I have followed everything in "http://msexchangeteam.com/archive/2009/11/18/453251.aspx" with no luck
Any suggestions?Piggybacking off of the discussion above, with our deployment of Exchange 2007, we created a set of web-based tools that allowed people to create Exchange Resources including distribution lists. To allow multiple people to manage the lists for a given
department, we programmatically created a group, which is populated with one or more users from the "resource department". We then set the following AD permissions to allow members of the group to manage membership of departmental distribution lists:
Add-ADPermission -User DepartmentalGroup -AccessRights ReadProperty, WriteProperty -Properties 'Member' -DomainController dc.contoso.com
Fast forward to Exchange 2010 and the landscape has changed with Exchange 2010's implementation of Role Based Access Control and I'm struggling to come up with a way to programmatically allow a group of users to manage distribution list membership for a
subset of distribution lists - note that we have approximately 75 departments, with each having its own set of coordinators who should be able to manage distribution lists for their department but not lists created by other departments. The specific
error we receive in Outlook when attempting to modify group membership is the same as the title of this thread - "Changes to the distribution list membership cannot be saved. You do not have sufficient permission to perform this operation on this object".
I implemented the settings referred to at
http://sysadmin-talk.org/2010/06/omg-allowing-end-users-to-manage-distribution-group-membership-in-exchange-2010-2/ which details the process of creating a new management role and revoking the role's ability to create new distribution lists and remove distribution
lists (which we want because we want those actions to be performed using our web tools).
All that to say that the ultimate problem we have is that the above relies on the "ManagedBy" field of a distribution list (viewable by Get-DistributionList Listname | fl *ManagedBy*) to determine group ownership. When "ManagedBy" is set to a user,
the user CAN edit a distribution list's membership from Outlook and OWA. When "ManagedBy" is set to a group, members of the group are UNABLE to edit the membership of the distribution list via Outlook or Outlook Web Access/ECP. Furthermore,
Set-DistributionGroup does not allow you to specify a list of users to assign to the ManagedBy field. However, if "ManagedBy" was set to a specific user and that user logs in to the Exchange Control Panel and adds additional "owners" of the distribution
list, which I can then see from EMS - both the original owner and any additional owners added can in turn modify group membership for the list using Outlook or Outlook Web Access/ECP.
My questions:
1) Is it "expected" behavior that while I can assign a group to the "ManagedBy" property of distribution list, members of that group are still unable to edit the group membership? ...or is there a fix for the behavior I'm seeing?
2) Can multiple values be assigned to the "ManagedBy" property when using Set-DistributionList - ex: Set-DistributionList DLName -ManagedBy:user1,user2
3) Any other suggestions?
Thanks,
-Lance -
BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.
These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.
-
Firefox Mobile 4 beta 3 (and pre-beta 4) fails to install on Archos 101 Tablet using Android 2.1 Eclair with no specific error. Is this a know issue or has someone been able to successfully install?
Sorry, we haven't tested Firefox on this device yet, and we aren't sure why it isn't working. If anyone (especially with Android development experience) would like to help us debug this problem, please start by creating an account and submitting a bug report at: https://bugzilla.mozilla.org/
Thanks for the report. -
When I try to login to the website of my bank, I get the following error message:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have a new MacBook Air with OS Yosemite installed.
What is the problem and how can I solve it?Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP. -
I have a Mac Mini (early 2009) running OSX 10.8.1 on a Windows network that is driving me nuts.
Background
Typically, 6 or 7 computers are running (Windows 7, OSX 10.8.1 and Linux) on the network at any given point in time. Network printers and hand helds (iphones, PlayBooks, etc.) are also connected.
The problem
If one specific Windows 7 desktop is running, a pop-up error message comes up frequently. The eror message is:
There was a problem connecting to the server "[Server name or IP]". You do not have permission to access this server.
The pop-up sometimes refers to the device name and sometimes refers to the IP address of the desktop.
Oddities:
This does not occur on a MacBook Pro also running 10.8.1
The error message does not occur for other Windows computers on the network. I have laptops running Windows 7 Professional that have never shown up on the error message..
Files on the problem desktop are easily accessible through [Finder].
Things I've tried to resolve the problem:
Ran software update - multiple times
Changed the destination drive for [Time Machine] and completed a backup
Cleared the "Recent Server" list from the [Finder][Go][Connect to Server] screen
Attempted to demount the desktop in [Finder]. The option was not available
Disconnected from the desktop in [Finder]. This did not resolve the problem and the desktop was automatically showing on the [Shared] list in [Finder] after the next reboot.
Booted in SAFE mode to see if the problem re-occurred in SAFE mode. It did not.
Any suggestions would be appreciated.Thank you. It wasn't in there directly, but CISCO's "Network Magic" was there. Removing it appears to have solved the problem.
Thanks again and have a good weekend.
Bob -
Windows Vista Bonjour error "You do not have sufficient access..."
My Windows Vista laptop recognizes my HP PSC 1310 printer connected as a USB printer with Airport Extreme. It even has the correct driver. When i go to finish set up i get an error "You do not have sufficient access to your computer to connect to the selected printer". I am doing this as an admin on my PC. The printer works correctly on my Macbook. The guidance given by apple is no help at all. Any ideas?
I experienced the same general problem and did find a manual workaround in my particular instance. Hopefully this is helpful to anyone who's facing the same situation.
MY SETUP: installing a hp LaserJet 1012 that's tethered to a wireless Time Capsule (home network) on a virtual VISTA platform running within Parallels 4.0.3810 on an iMac OS 10.5.6.
THE PROBLEM: WinXP (also virtual) connected to the printer through BONJOUR FOR WINDOWS without any problems. However, doing the same in Vista resulted in a last step termination of installation with the following message from Vista: "You do not have sufficient access to your computer to connect to the selected printer." Lovely.
Turns out, according to Microsoft (link: support.microsoft.com/kb/946394/en-us Help and Support Article ID: 946394 - Last Review: January 24, 2008), the problems is due to "the Hewlett-Packard (HP) print driver uses an HPBmini.dll file ("HP Mini Installer") whose version is earlier than 1.0.0.13."
My workaround was to simply install the network printer manually via ~ (the following are the choices that I clicked on in VISTA)
Vista Control Panel > Hardware and Sound > Printers > Add a printer >
Add a network, wireless or Bluetooth printer >
The printer that I want isn't listed >
Add a printer using a TCP/IP address or hostname >
CHOOSE - Device type: Autodetect
INPUT - Hostname or IP address: "Time-Capsule"
(which is the specific hostname in my case, the hostname can be found by going to OS X System Preference > Print & Fax > click & highlight the printer installed on the local network in OS X and look for the hostname after "Location:". Remember, Windows do not do spaces, so if there are any spaces in your hostname be sure to substitute a dash "-".
SELECT - "Query the printer and automatically select the driver to use" >
Device Type > Standard | Generic Network Card > Install the printer driver* >
(*Here's the tricky step, since you don't want to use an old driver which would bring up that old insufficient access message, but you do have some options:
a) you have a known VISTA COMPATIBLE driver from the manufacturer (net downld);
b) the "Add Printer Wizard" window may contain a driver for your specific printer or a similar printer. Also, try the "Windows Update" button to refresh the choices if you can't find it the first time; and finally,
c)"Generic" is a legitimate choice in the Manufacturer window if you can't find any better options.)
From there, it's just Next > Next > and choose to share printer, etc. to finish up.
Luckily, I got through to "Print a test page" and it all works without the annoying "insufficient access" message.
Best of luck to you.
Maybe you are looking for
-
Web Viewer - getting buttons to open in a new tab or window
I am trying to get a button to open in a new tab or window in the DPS web viewer. The options when creating a button are: Open link in folio Open link in device browser Both which do not work when we export the web viewer. I know it is possible as Ad
-
How can I see my ipad on itunes after cut the restore?
I was restoring my ipad then I accidently closed the itunes by Task Manager and now I can't see my ipad in itunes or any similar program but when I plug my ipad to the PC I can hear the alert means it's plugged , and I can see it in Device Manager ,
-
IPod touch 2nd gen hooked up to computer but iTunes doesn't recognize it
My iPod touch 2g 8GB has always worked fine and synched with the computer, but now the computer doesn't recognze. It is hooked up to the cable and in the USB port. The iPod itself shows that it is charging, so it knows it's in the computer. iTunes sh
-
Hello, I Have installed Iwork 09 (Family Pack that I JUst purchased, It Is a DVD Version. My question is: After installing it, in the menu location under preferences, it says the word ( Try Iwork . . . ) greyed out of course, works ok. with no proble
-
Can't uninstall creative software - please he
Hi all,?I tried out the Zen V Plus and decided on another mp3 player - now I can't remove creatives software from my system. Nothing from creative shows up under add remove programs (I used that to remove the creative stuff first, it didn't work thou