ARD 3.2 doesn't correctly show available clients

We have over 500 student laptops which we manage via multiple copies of ARD both in the IT department as well as selected faculty.
We have noticed that often ARD will not indicate that any client machines are online, when in fact we know that there many on-line. Sometimes, just quitting and relaunching ARD will resolve the issue. But we have a few copies of ARD which continue to erroneously show that all the clients are offline regardless of our best efforts.
Does anyone else see this same behavior, and/or have a solution?
Tnx

Yes! ARD 3.2 has been behaving strange ever since I installed it on my admin system running Leopard. It will misrepresent that status of workstations until I select the workstation- it will then update the status. Sometimes even the system I select changes to an entirely different system! Quitting and relaunching ARD will resolve the issue but that is not a solution.
In addition, it does not correctly report software versions anymore. When installed on my admin desktop that is an Xsan client and running 10.4.11, it attempts to use the metadata network for management! (I'm not sure if earlier versions of ARD did this as I've always run it from my laptop, but it's crazy regardless.)
ARD has been a rock solid performer in the past, so it's deeply disappointing how buggy it has become.
Sorry I can't offer a solution, but you are not the only one finding ARD 3.2 buggy.
Best
Jen

Similar Messages

My movie rental doesn't show available, how can I retrieve it?

I was watching a movie rental on my Apple TV and there was a power outage. When the electricity returned my rental was no longer showing available. When I tried going to "Check for Rentals" in the iTunes settings on my Apple TV, it never actually brings it back.
How do I get access to the movie? I'm probably not going to find out prior to the 24 hours expiring, so, how do I go about getting a refund?

Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

Finder is not correctly reporting available disk space

finder is not correctly reporting available disk space
my drive is 50% full but finder shows there is only @ 35% left
the difference is more than anything needed by the system
any ideas on what is causing the problem?

Try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

Submit button in inserted HTML is not correctly shows

Submit button in inserted HTML is not correctly shows.
<input type="submit" name="submit" value="Submit">
Button doesn't have a round gradient background like in real HTML.
Looks like Muse translated it not correctly. Muse doesn't use inserted code directly to the browser.
The ??? is how to see a real html appearance?

Dear All
I feel adobelance is giving us a pretty good answer.
I tried code in Dreamweaver and got:
And in Muse I got:
I did have to change the border from outset to solid grey (to give it the colour) - the main difference seems to be the font. It was close enough for me, though.
I am not a Dreamweaver developer and this is the first code I have run in Dreamweaver (successfully, anyway).
Muse allows Designers to sketch web sites and as such is good - but it is not Dreamweaver. I admit I subscribe to Creative Cloud - so I can use Dreamweaver or Muse and am using the latest version but I am a fan of Muse so far.
My HTML in Muse is
<form>
<form method="post" action="senddata.php">
<label for="lastname" style="color:black; background:light grey">Last Name:</label>
<input type="password" id="lastname" name="lastname">
<input type="submit" value=" Submit Form! " style="border:2px solid grey; color:black; background:light grey">
</form>
I do hope this assists you all.
Kind regards

Exchange 2010 - Issues with Room Finder not showing available rooms.

Hi,
We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
for troubleshooting:
Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
. We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
If I have missed any information please feel free to ask for more info.
Thanks, all help will be appreciated.

Hi,
According to your description, I understand that room finder cannot show available room in Outlook 2010.
If I misunderstand you concern, please do not hesitate to let me know.
I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Bought two songs from iTunes store on my iPhone 4s. Tried bringing the songs from my phone to my computer iTunes through iCloud but it doesn't even show the option to choose music?

My computer has been authorised and has the newest version of iTunes. My iPhone shoes the option of choosing my computer's music but my computer doesn't even show the option of music, but shows apps, movies, tv-shows and books. When i choose the option of find music to download from my phone, it says i have downloaded all yet i haven't and the music isn't in my library.
This was my first time when i bought anything from iTunes store and it also shows in my account information that i have bought these two songs but when trying to download them from my iCloud it doesn't work. Also when i click on the songs in my iTunes store on my computer, it says i have bought them but doesn't show the option of playing them. Is the problem in my iPhone or is this something to do with the songs' copyrights?

Hi Petrafin,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
You can download your purchases directly to your computer.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy

Can't eject disc & it doesn't even show up on system!

I installed Parallels 5.0 from the installation disc, which seems to be installed just fine, but now I can't eject the disc and it doesn't even show up under devices. I tried all these things below except the last one (because I couldnt get my mac to start like it describes). What now? I just bought this Macbook Pro new a week ago - soooo annoying!
Ejecting a CD or DVD when all else fails
If you've tried all the usual methods of ejecting a CD or DVD from your computer's optical drive, there are some other methods you can try.
First, quit all applications that are using files on the disc. Then try one of these alternate methods:
Open Disk Utility (in the Utilities folder of your Applications folder), select the disc, and choose File > Eject.
Choose Apple menu > Restart and hold down the mouse or trackpad button until the disc ejects.
If your drive has an emergency eject hole, put the computer to sleep and insert a large, straightened paper clip in the small emergency eject hole of the drive (the location varies, depending on the drive). Push firmly until the disc ejects.
If all other methods fail, you can try to eject the disk using the firmware. (This may not work on all computers. For example, it does not work on Intel-based computers.) The steps below describe how to start up and briefly use the computer with only the firmware loaded, not the standard Mac OS X interface.
To eject a disc using firmware:
Restart the computer.
When you hear the startup sound, press and hold the Command-Option-O-F keys. (The Command key has an Apple on it.)
Release the keys when you see a white welcome screen.
At the prompt, type:
eject cd
Press Return, then wait a few seconds. The disc drive should eject the disc, and "ok" appears on the screen when the action is complete.
Type:
mac-boot
Press Return.
Your computer starts up normally and you see the familiar Mac OS X desktop.

Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
I suggest that to start with you shutdown the computer. If you are unable to remove the DVD then it's possible there's a problem with your optical drive. Take the computer in for service.

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

HT201210 I backed up old phone to PC then did a sync to new 4S but when trying to update apps on phone it states - account not valid in Argentine store, must switch to U.S. store. I am in US and when I view account on PC it correctly shows me in US. Now w

I backed up old phone to PC then did a sync to new 4S but when trying to update apps on phone it states - account not valid in Argentine store, must switch to U.S. store. I am in US and when I view account on PC it correctly shows me in US. Now what?

log out and log back in again to store
and if required
http://support.apple.com/kb/HT1311

Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

Why won't my ipod touch sync? It is all up to date and everything, and i know it is connected because when i plug it into my computer it charges, but it doesn't even show that it is connected so i can't sync all my new songs:(

http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591

Freight Charges does not correctly show Tax % / calaculate

Hi
When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
Somebody an idea whats wrong?
Thanks
Franz

Problem solved.
As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
So, for correct tax calculation, always make sure the posting date is entered before.
@SAP: Change the behavior with the default posting date, as it is in all other modules.
Best regards,
Franz

Helpful answers available: 5. Correct answers available: 1

I see the "Helpful answers available: 5. Correct answers available: 1" statement on top of unanswered threads. Even though there are no helpful or correct answers to the question. Why ?

That statement is a description of what the author of the thread has available to them.
The phrasing of such a description could possibly be better, but it is what it is.
The person that originally posted the question to the forums can toggle up to five responses as "helpful" and can choose to mark one response as "correct".
Of course, that action can (and often is) simply ignored.

My spell check in Pages doesn't correct the letter i to capital I ?

my spell check in Pages doesn't correct the letter i to capital I ? i have the prefs checked off to automatically check spelling as i type.

I hate it when people do that. YAY I FIXED IT..... then don't bother to share. You came asking for help, when you found the answer why not help others?

My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

- If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and if iTunes sees the iPod restore via iTunes.
- Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last, make an appointment at the Genius Bar of an Apple store.

ARD 3.2 doesn't correctly show available clients

Similar Messages

Maybe you are looking for