ARD 3.2 - screen share primary display only?

Greetings.
Please forgive me if this has already been addressed. (I searched, but found no matches)
My ARD admin machine is a dual monitor setup. I've noticed when I share the admin screen with the target clients, the clients display both the admin's screens (primary and secondary). Is there a way to share only the admin's primary display?
Thanks so much,
Matt

I should add, that switching the secondary display to "mirror" the primary, got the desired results on the client machine displays.
However, I was hoping to be able to only show the primary display, when the displays are actually set to primary, and secondary, and not mirrored.
Thanks again,
Matt

Similar Messages

  • Mountain Lion, ARD Admin, and Screen Share Issue

    We recently upgraded one of our Labs to OSX 10.8.2.  The guy who teachs in that Lab then brought to my attention that he can no longer share his screen with computers in the Lab which are not logged in.  If the machine is sitting at the Login screen he cannot share to them until after the students login. Control works fine through ARD, but not sharing.  All clients have ARD version 3.6.2 installed.  ARD Admin is version 3.6.1 and I can replicate in other buildings/locations.
    Attempts to share with a 10.8.2 machine (one or many) which don't have anyone logged in will by all indications in ARD look like the sharing is happening on the Administrator machine, but you can visually see the screen is still sitting at the login prompt.  The display on the machine to be controlled flashes for a second when the Admin clicks Share and it flashes again when the Admin unshares their screen.  The same test run against a 10.6.8 client(still have a group in th next lab over) doesn't have the same problem.
    My initial thought was this may be some sort of feature, but I don't see any where to turn it off. I've searched around, but I don't think I'm searching with the right terms for this issue. Any thoughts?

    I've never been able to share my screen to computers that no one was logged in on; and i've been using ARD sense Mac OS X 10.4. I'm not saying it hasn't been possible; I've just never been able to get a computer to do that.
    My work around is use send unix command as user root. I have a unix script that basicaly triggures and applescript to type a user / pass to login of a generic account. it takes about a minute to run. and if some one is logged in, it dosen't do any thing to that computer.
    Heck it can even be set to be the default send unix command. so all the the user has to do is select all computers, click send unix, and click send.
    Some thing like this:
    if [[ "$(who | grep console)" == "" ]]; then osascript -e '
    tell application "System Events"
    keystroke return
    keystroke "a" using command down
    keystroke "PASSWORD"
    keystroke tab
    keystorke "a" using command down
    keystroke "USERNAME"
    keystroke return
    keystroke return
    keystroke return
    end tell';
    fi

  • FS10N local currency display only

    HI SCN ,
    In our scenario we have posted a FI Transaction in $1000 in USD .The GL account in FS00 is maintained with USD . The local currency maintained is EUR.
    IN FS10N , the report show only EUR and no values under USD.
    Let me make it more clear -  The FS10 N show say 10 line items under AED. When i select the USD , its  showing blank .
    What could be the reason ? Please help.
    Please note : Its working fine with FS10 and drilldown in FS10N
    thanks
    Praveen

    Hi,
    Try changing the display currency from FS10N output. Click F6 from FS10N output to shuffle the currencies. You can find the details of the displayed currency in ALV header.
    Note: In overview screen, you can display only one currency at a time.
    Thanks,
    V V

  • ARD, screen share and a second monitor

    I have a 2008 20 inch iMac and 13" aluminium macbook. I wanted to use the iMacs screen with my macbook and decided to get ard (as it was kind of cheap on the app store).
    I was a bit disheartened when I found that, when controlling the macbbok from the imac, I couldn't make the window go full screen. I understand this was a resolution issue that couldn't be gotten around.
    However did find out that if set used ARD's screen share (rather than the light version that comes with OSX) that I could get full screen by reducing the resolution of the iMac.
    However when I plug an external monitor into the macbook it all goes wrong. If I am using the OSX version of screen share (light) then I can choose to show only one display. If I use the ARD version I don't have that option and can only view both screens.
    What I had hope for was to be able to use the fullscreen capability of ARDs screen share with my macbook with a second screen attached, but only view the macbook screen on my iMac.
    Is there a way of achieving this with ARD. Or am I going to have to try an alternative software?
    Thanks
    Gareth

    The obvious choice for an Apple display is the 24-inch LED (backlit) Cinema Display. It as the same Mini DisplayPort connector, and it will give you a few more USB ports. But it as some extra features that may not be necessary for use with an iMac, such as its own iSight camera, built-in speakers, and a power connector for use with MacBooks. And it costs $899 retail. But it would certainly look nice next to an aluminum iMac.
    http://www.apple.com/displays/
    For a non-Apple display, there are many choices. They are generally cheaper. The standard digital connector is DVI. You can also use a display with a VGA connector, but DVI would be better if you are getting a new display. If your iMac is a 24-inch model, its built-in display has 1920x1200 native resolution. That would be a good choice for an external display, typically 23 or 24 inch. You can go all the way up to 2560x1600, which is typically a 30-inch display (including Apple's model). You can even get one with Dell branding that works.
    http://eshop.macsales.com/item/Dell/3007WFPHC/
    Your choice depends on how much you can afford to spend and how big (in terms of resolution) you want it to be.

  • IPhone 4 OS 7.1.2 (11D257) display normal when switching on, turns to very high contrast primary colours only, no tonal graduation. Wifi no longer works.

    iPhone 4 OS 7.1.2 (11D257) display normal when switching on, turns to very high contrast with bright primary colours only, no tonal graduation.Initially problem arose every time I switched the Camera on, but has worsened such that any application can cause it. In Camera, after a short time screen goes black. Also,  Wifi no longer works. 

    You're welcome
    In case you don't want to buy a new iPhone, Apple will replace the whole unit if you are willing to pay the service fee of 149$ for the iPhone4.
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Did you check the Zoom setting?
    Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
    If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

  • Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

    Hi,
    I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
    In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
    How can I resolve it.
    Waiting for your valuable suggestions.
    Regards,
    Nageswar.

    Dear Rajneesh Saxena
    Thanks for your prompt reply.
    Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
    While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open  screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
    Problem is solved
    Regards,
    Nageswar.

  • Ship-to Address" screen in SRM browser need to change to display only

    Hi Freinds,
    Ship-To Address" screen in SRM browser needs to change to "Display" only. The users shouldn´t have the possibility to change the delivery address in the screen to their own private address.
    Is it possbile to do any changes in SRM itself or else its purely JAVA HTML work.
    Kindly i need you guys help to resolve the above development.
    Regards
    Vivek

    Hello Vivek,
    Solution given by Suneel should be OK.
    Nevertheless, if Ship-To must be only in display mode for all users (independently of their role) and only for particular document types, you can manage it with partner schema:
    SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Define Partner Schema
    Then maintain this partner schema ID to your concerned document type:
    SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Define Transaction Types
    Regards.
    Laurent.

  • Screen Share - Change what to display & video quality

    Hi LCSS Team,
    I have been playing around with screen share and have it working in collaborative (both ends can share/control their screens).
    Upon initial selection of deskop/app/window, is there a way to allow users to change what to display without having to
    start/stop?
    Use case:
    - User A is viewing user B screen. User B would like to change view from desktop to a specific window.
    Also, the screen share video feed is very pixelated. I have tried it multiple settings including what you guys sent
    me. I am trying to get it to Skype like quality. Is that even possible?
    Thanks,
    Michael

    Hi octoguy,
    iChat makes hardware and connection speed checks as it starts up.
    This gives you the framerate and bit rate duirng a call.
    Lets say that your processor gives your iChat 15 fps
    This will be the rate that you will then see to a another Mac.
    The same computer is likely to get 10 frames per sec to a PC.
    This is some part due to the PC putting a fair amout of effort into producing a clear detailed pic.
    On some PCs this setting for the video pic is so high that the audio will drop out completely.
    The cure is to bring the PC preview to the front (tabs)
    Then click on the small icon that appears to the right and adjusting the slider that appears to the left.
    This will incease the frame rate and bit rate from the PC. It makes the video look smoother although the actual quality has gone down (you may not be able to judge this quality difference by eye)
    As general rule you will get about 2/3rds of the normal Mac to Mac framerate shown in the Connection Doctor. It also seems to take about 50% more Connection speed to get the same quality video.
    So Mac to Mac min is 100Kbps where as Mac to PC will need about 150kbps.
    The quality drop from 15 frames a sec to 10 frames a sec does make the video generally more blocky but does also depend a fair bit on the processor power of the PC and the camera used.
    I know that sounds a little vague but there are really many variables that can be a factor.
    11:23 PM Monday; April 24, 2006

  • ECM - Display only certain employees on Comp Planning Screen

    Hi,
    I'm trying to find a way to display only salaried non-production employees in the Salary Planning screen. Currently I get both salaried and hourly production employees.
    Does anyone know of a way to omit the hourly production employees from the iView?
    Also, is there a way to omit ineligible employees from the iView?
    Many thanks
    Tony

    Hi,
    Even we have the same issue. But we cannot modify standard FM due to business requirements.
    Is it possible to filter from portal side?
    Also, how did u achieved it by moifying the standard FM? Any details around it?
    Any help greatly appreciated.
    Thanks,
    Santosh.

  • Display Only Screen design

    Hi,
    I have created a screen layout wherein all fields are marked for display only. I assigned this screen layout in a functional authorization for buyers. When I checked, there are still fields left editable such as:
    1. Purch Org
    2. Company Code
    3. Conditions
    4. Line Item number
    5. All fields in account assignment tab of line item
    I want all fields to be display only. How will I do it?

    Hi Jackie,
    If you need all the fields to be in display mode assigned to the buyer. Remove the Authorization of ME21N from the user using the T Code SU01.
    Regards,
    Bijoy Kumar

  • I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.

    I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.

    This issue can be caused by the Babylon Toolbar 1.1.8 extension
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Adobe connect can share screen with Admin login only!

    Thanks for your time!
    Windows XP sp3

    Not having the Screen Share icon sounds like they were a the Participant level of permissions in the room, and needed to be promoted up to Presenter or Host to be able to share their screen.
    Here is a screen shot, with the Participant on the left and a Host/Presenter on the right:

  • MuVo N200 screen displays only the Creative l

    I have owned my Creative MuVo N200 for 3 years. Recently, it will display only the Creative logo. Although I know that music is loaded on there, the songs are neither displayed nor are they played. Is it time for a new MP3? What is the life expectancy anyways?

    kungfookiller,
    Try downloading the latest firmware update from website and use it to update and format the player. Remember to check the option 'Format Data Area'. Backup your player data first though.
    Jason

  • CAN'T SCREEN SHARE! TRIED EVERYTHING! PLEASE HELP!

    My girlfriend just got a new Macbook and I've been helping her set it up across campus though our network at my university. It worked fine and then one day it didn't. Every time she asks or I ask to share her screen it gives this error to both of us:
    "Failed to start Screen Sharing because: Screen sharing could not be established."
    I've been reading discussions on how to fix this for 2 weeks now and nothing has seemed to work. What is weird though is that I can screen share PERFECTLY with my Uncle who lives in Wisconsin (I am in Arkansas) from campus. However, I can't seem to connect to my girlfriend's computer who is simply just a few buildings away.
    The following is what we've tried:
    1. Switch from wired to wireless network
    2. *Set "System Prefs>Quicktime>Streaming" to "1.5 Mbps T1/Intranet/LAN"
    3. *Set "iChat Prefs>Audio/Video>Bandwidth Limit to both "500" and "None"
    4. *Both computers have a firewall set to "Allow all incoming connections"
    5. *When #4 didn't work we set firewall to "Set access for specific services and applications > iChat.app set to "Allow incoming connections"
    6. Rebooted both Macs
    7. Deleted all com.apple.iChat.X.plist files and started over fresh
    8. *Enabled "Screen Sharing" in System Prefs>Sharing
    *Restarted iChat afterwards
    I think that's all. It is just really frustrating because I can screen share with someone clear across the nation but not someone who is on my same network. The only difference is that she is using a Gmail account through AOL and I am using a @me.com address. I thought maybe Gmail wasn't working so I had her switch to an AOL account and still same error.
    We cannot port forward for obvious reasons at school but it worked before and nothing on the firewall has changed. I work at the IT department at our university and spoke with the person who runs the Firewall and supposedly there are no blocked ports on the part of the network we use. I know with iChat 4 in Leopard it doesn't use a specific port, it bounces around until it finds one according to article regarding port forwarding and NAT routers and iChat.
    The weird part is that when we are both off campus (different houses) and try it, Screen Sharing tries to start, she gets the big words across her screen ("Screen Sharing Started" I think...) and we can hear about 5 seconds of audio and then it errors out again. I really want to get this working can someone please tell me how? This is really frustrating.
    Thanks,
    -jg

    Hi,
    First off from reading this it should be an AIM valid name (@mac.com, AIM or @me.com) to AIM valid name or
    a Jabber valid name (which includes Googletalk valid Gmail IDs) to another Jabber valid name
    (that is both should be using the same type of Buddy list)
    As you say the Apple Doc on this is not clear on the Screen Sharing part - listing only the changes to the AV ports compared to the Previous Doc (Now article HT1507). It does not mention the Screen Sharing at all.
    Reading around suggests the Screen Sharing is based on Apple Remote Desktop and reading the com.apple.ichatAgent.plist with QuickLook shows a reference to a ARD link/process. (the same can be seen if you install Developers Tools from the Install disk which will give you Property List Editor which will open the .plist files).
    The Article TS16929 (Previously Doc 106439 shows that Apple Remote Desktop uses port 5900 and 5988.
    Having said that though I run Little Snitch, an application that monitors and reports which IPs and Ports and application is trying to use. This shows me a completely random port in the 15xxx range along side the AV port 16402 for the Audio component. It maybe that Apple Remote Desktop also moves to a random port after it has established a connection.
    Most people fail on the Audio part and get the standard Log Pop up screen to send or not to Apple - BUT you clearly have the other message...
    "Failed to start Screen Sharing because: Screen sharing could not be established."
    .... which is unrelated to the Audio part.
    This would clearly put things in to the realms of a firewall or setting issue with possibly modem/router or LAN features getting in the way. (Leaving aside ISP related things for the moment).
    You say iChat is in the Allowed Specifics List in the Leopard Firewall.
    You say that nothing has changed on the Campus Firewall and can connect Off-site form On-site so it would seem not to be there.
    On this last issue, check if they have introduced a Streaming cap on Intra-Site links. They may be trying to prevent other things such as Peer-to-Peer File Sharing or thing like everyone sharing their iTunes Libraries and other similar activities. The ability to Share Optical Drives re MacBook Airs maybe a factor.
    I would tend to look towards your girlfriend's Mac.
    Since iChat 2 it seems that some failed chats seem to hold on to ports or have some hold over the Network going on.
    It seems most common when in System Preferences > Network the drop down at the top listing "Location" is left at the Automatic Default.
    There are essentially two fixes for this.
    1) Set up another Location and copy the settings across and switch between the two to force the Network to re-establish itself.
    2)A longer way of clearing what is going on.
    a) Shut any Airport card down if using WiFi
    b) Shut down the computer.
    c) Disconnect any Ethernet cable from either Computer or routing device (whichever is easier to reach but leave the routing device still connected to the Internet - just isolate the computer from the Internet)
    d) Restart the computer (this is with no Internet Connection)
    e) Restart iChat.
    f) Restart Airport card or plug in Ethernet cable.
    g) Using the Buddy List, select Available and make iChat Login (can also be done from the iChat Menu (> Accounts submenu in iChat 4)
    On your last paragraph I would ask if you can Video chat at this set of locations ?
    This is because in this scenario a feature of one of the modems may be an issue.
    Some modems and routers have DOS (Denial of Service) or SPI (Stateful Packet Inspection) protection. These tend to be threshold based and have no setting control in the devices set up pages (other than On or Off).
    iChat can stream so much data, particularly in Video chats over what are now quite high Internet speeds that a DOS feature will consider it an Internet attack and cut the port involved. SPI tends to be judging whether the data stream is valid and does not seem to keep up and the result is the same.
    In Video chats the end that has the Problem tends to get a Error -7 In the Log.
    The Other end gets the "No Data for 10 Secs" message.
    Summary.
    Essentially though as you have tried a deletion of all the .plists for iChat and you imply both ends it is more likely something about the Network or how the Mac thinks Network resources are already allocated.
    There is not an easy .plist deletion for this hence the two methods listed above.
    NOTEs: 1) #8 in your list is not related to iChat.
    This is what you can now use of Apple Remote Desktop itself. It has it's own Screen Sharing app (without Audio like iChat) that is invoked from the Finder's Go Menu > Go to Serve and entering a VCN:// IP address. (As a System Application, as it were, it is in /System/Core Services/Screen Sharing.app)
    It does need both Macs to have the Setting Enabled as you have done it #8 though
    2) Some ISPs it is suggested block Screen Sharing. (Verizon was the name I heard mentioned). How they tell what the data steam is specifically I do not know as it would seem that the Audio part of an iChat Screen share would make it look like an A/V chat and that Apple Remote Desktop must be a valid way of working for some people. However iChat is Peer-to-Peer in AV chats and Screen Sharing and some ISPs are known to actively work against these file sharing apps that bear the same generic term.
    In your case I do not think this applies as you can Connect Off site via whatever ISP your Campus uses.
    I hope this helps.
    9:58 PM Wednesday; October 1, 2008

Maybe you are looking for