Are any special FaceTime settings required to transmit video?

When attempting to establish a FaceTime session with a remote iPad2, can ring the desired destination, the person at the other end can click to receive the call, but the link disconnects before any video is transmitted. My Mac Mini is connected to a router by an ethernet connection. All other net conections appear to work normally. Am I missing some required setting?

Does it allow in same way with firewall setting in Windows Server 2008?
I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
I
will be really thankful

Similar Messages

Issue while generating MD5 if there are any special characters in the CLOB

Hi Guys,
I need your help...
We are using dbms_crypto.hash to generate the MD5 hash value for a CLOB that will be sent to other feeder systems. The feeder systems validate the file by generating the MD5 hash value on their end and compare with the MD5 generated in Oracle and accept the file only if the MD5 hash value matches.
The MD5 file matches between both the systems except in the case where there are special characters in the CLOB. Somehow, MD5 is prefixing Â character before any special character and calculating the MD5 value. In our case, our special characters being ®, §, ™, ©....
This is a high priority issue for us and it is holding our UAT.
We are using Oracle 11.2.0.2.0.
Your response is really appreciated.
Best Regards
Gupta

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
We are using dbms_crypto.hash to generate the MD5 hash value for a CLOB that will be sent to other feeder systems. The feeder systems validate the file by generating the MD5 hash value on their end and compare with the MD5 generated in Oracle and accept the file only if the MD5 hash value matches.
The MD5 file matches between both the systems except in the case where there are special characters in the CLOB. Somehow, MD5 is prefixing Â character before any special character and calculating the MD5 value. In our case, our special characters being ®, §, ™, ©....
>
See if my reply in this thread addresses your problem.
Re: MD5 HASH computed from DBMS_CRYPTO does not match .NET MD5
The fix in almost all of these cases is to understand that the Crypto package always converts everything to AL32UTF8 before hashing.
ALWAYS.
ALWAYS.
ALWAYS.
Unless the 'other' hash generators (substitute any generator you wish) do it the Oracle way you will NEVER get a match.
NEVER.
NEVER.
NEVER.
There are no workarounds.

ARD 3.3 slow screen redraw - are there special router settings ?

Hello all !
I think I read somewhere on previous Google searches about special router settings to help ARD run as quickly as possible.
I connect to an external site via an intermediate machine in a DMZ area for security (Network Group stipulation) and have found ARD 3 to be sluggish on a line that has actually been upgraded from 2MBit to 10 MBit ...
I am ARDing from my machine to another also running ARD to then get to the site ...
I also recall version 2 of ARD "seemed" to be better redraw then this version ...
Mitch

So is NO ONE experiencing this?
I find that hard to believe...

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Special camera settings for green screen

Are they any special camera settings when you shoot in Green Box???
e.g. special white balance or special iris usage??

What's a Green Box? (other than something that'll show up under my Christmas Tree sometime soon)
Patrick

Not able to transmit Video

Hi,
I m new to JMF.We are using MjSIP and i want to transmit video through JMF to other machine.The problem is the implementation which is given in MjSIP isnt working .
I mean whenever i execute the implementation given in mjSIP like JVisualReceiver etc.Both machines hangs coz they are not being able to realize the processor.I have successfully run the Player but i m getting problem in realizing the processor.
Although we are using the same processor.realize() method given in JMF Api.
Even i m not being able to run this sample given by SUN.
package local.ua;
* @(#)VideoTransmit.java     1.7 01/03/13
* Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved.
* Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
* modify and redistribute this software in source and binary code form,
* provided that i) this copyright notice and license appear on all copies of
* the software; and ii) Licensee does not utilize the software in a manner
* which is disparaging to Sun.
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
* IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
* LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
* LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
* INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
* OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
* This software is not designed or intended for use in on-line control of
* aircraft, air traffic, aircraft navigation or aircraft communications; or in
* the design, construction, operation or maintenance of any nuclear
* facility. Licensee represents and warrants that it will not use or
* redistribute the Software for such purposes.
import java.awt.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import java.io.*;
public class VideoTransmit {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private String port;
    private Processor processor = null;
    private DataSink rtptransmitter = null;
    private DataSource dataOutput = null;
    public VideoTransmit(MediaLocator locator,
                String ipAddress,
                String port) {
     this.locator = locator;
     this.ipAddress = ipAddress;
     this.port = port;
     * Starts the transmission. Returns null if transmission started ok.
     * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start() {
     String result;
     // Create a processor for the specified media locator
     // and program it to output JPEG/RTP
     result = createProcessor();
     if (result != null)
         return result;
     // Create an RTP session to transmit the output of the
     // processor to the specified IP address and port no.
     result = createTransmitter();
     if (result != null) {
         processor.close();
         processor = null;
         return result;
     // Start the transmission
     processor.start();
     return null;
     * Stops the transmission if already started
    public void stop() {
     synchronized (this) {
         if (processor != null) {
          processor.stop();
          processor.close();
          processor = null;
          rtptransmitter.close();
          rtptransmitter = null;
    private String createProcessor() {
     if (locator == null)
         return "Locator is null";
     DataSource ds;
     DataSource clone;
     try {
         ds = Manager.createDataSource(locator);
     } catch (Exception e) {
         return "Couldn't create DataSource";
     // Try to create a processor to handle the input media locator
     try {
         processor = Manager.createProcessor(ds);
     } catch (NoProcessorException npe) {
         return "Couldn't create processor";
     } catch (IOException ioe) {
         return "IOException creating processor";
     // Wait for it to configure
     boolean result = waitForState(processor, Processor.Configured);
     if (result == false)
         return "Couldn't configure processor";
     // Get the tracks from the processor
     TrackControl [] tracks = processor.getTrackControls();
     // Do we have atleast one track?
     if (tracks == null || tracks.length < 1)
         return "Couldn't find tracks in processor";
     boolean programmed = false;
     // Search through the tracks for a video track
     for (int i = 0; i < tracks.length; i++) {
         Format format = tracks.getFormat();
     if ( tracks[i].isEnabled() &&
          format instanceof VideoFormat &&
          !programmed) {
          // Found a video track. Try to program it to output JPEG/RTP
          // Make sure the sizes are multiple of 8's.
          Dimension size = ((VideoFormat)format).getSize();
          float frameRate = ((VideoFormat)format).getFrameRate();
          int w = (size.width % 8 == 0 ? size.width :
                    (int)(size.width / 8) * 8);
          int h = (size.height % 8 == 0 ? size.height :
                    (int)(size.height / 8) * 8);
          VideoFormat jpegFormat = new VideoFormat(VideoFormat.JPEG_RTP,
                                   new Dimension(w, h),
                                   Format.NOT_SPECIFIED,
                                   Format.byteArray,
                                   frameRate);
          tracks[i].setFormat(jpegFormat);
          System.err.println("Video transmitted as:");
          System.err.println(" " + jpegFormat);
          // Assume succesful
          programmed = true;
     } else
          tracks[i].setEnabled(false);
     if (programmed)
     return "Couldn't find video track";
     // Set the output content descriptor to RAW_RTP
     ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
     processor.setContentDescriptor(cd);
     // Realize the processor. This will internally create a flow
     // graph and attempt to create an output datasource for JPEG/RTP
     // video frames.
     result = waitForState(processor, Controller.Realized);
     if (result == false)
     return "Couldn't realize processor";
     // Set the JPEG quality to .5.
     setJPEGQuality(processor, 0.5f);
     // Get the output data source of the processor
     dataOutput = processor.getDataOutput();
     return null;
// Creates an RTP transmit data sink. This is the easiest way to create
// an RTP transmitter. The other way is to use the RTPSessionManager API.
// Using an RTP session manager gives you more control if you wish to
// fine tune your transmission and set other parameters.
private String createTransmitter() {
     // Create a media locator for the RTP data sink.
     // For example:
     // rtp://129.130.131.132:42050/video
     String rtpURL = "rtp://" + ipAddress + ":" + port + "/video";
     MediaLocator outputLocator = new MediaLocator(rtpURL);
     // Create a data sink, open it and start transmission. It will wait
     // for the processor to start sending data. So we need to start the
     // output data source of the processor. We also need to start the
     // processor itself, which is done after this method returns.
     try {
     rtptransmitter = Manager.createDataSink(dataOutput, outputLocator);
     rtptransmitter.open();
     rtptransmitter.start();
     dataOutput.start();
     } catch (MediaException me) {
     return "Couldn't create RTP data sink";
     } catch (IOException ioe) {
     return "Couldn't create RTP data sink";
     return null;
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
     Control cs[] = p.getControls();
     QualityControl qc = null;
     VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
     // Loop through the controls to find the Quality control for
     // the JPEG encoder.
     for (int i = 0; i < cs.length; i++) {
     if (cs[i] instanceof QualityControl &&
          cs[i] instanceof Owned) {
          Object owner = ((Owned)cs[i]).getOwner();
          // Check to see if the owner is a Codec.
          // Then check for the output format.
          if (owner instanceof Codec) {
          Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
          for (int j = 0; j < fmts.length; j++) {
               if (fmts[j].matches(jpegFmt)) {
               qc = (QualityControl)cs[i];
               qc.setQuality(val);
               System.err.println("- Setting quality to " +
                         val + " on " + qc);
               break;
          if (qc != null)
          break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
     return stateLock;
void setFailed() {
     failed = true;
private synchronized boolean waitForState(Processor p, int state) {
     p.addControllerListener(new StateListener());
     failed = false;
     // Call the required method on the processor
     if (state == Processor.Configured) {
     p.configure();
     } else if (state == Processor.Realized) {
     p.realize();
     // Wait until we get an event that confirms the
     // success of the method, or a failure event.
     // See StateListener inner class
     while (p.getState() < state && !failed) {
     synchronized (getStateLock()) {
          try {
          getStateLock().wait();
          } catch (InterruptedException ie) {
          return false;
     if (failed)
     return false;
     else
     return true;
* Inner Classes
class StateListener implements ControllerListener {
     public void controllerUpdate(ControllerEvent ce) {
     // If there was an error during configure or
     // realize, the processor will be closed
     if (ce instanceof ControllerClosedEvent)
          setFailed();
     // All controller events, send a notification
     // to the waiting thread in waitForState method.
     if (ce instanceof ControllerEvent) {
          synchronized (getStateLock()) {
          getStateLock().notifyAll();
* Sample Usage for VideoTransmit class
public static void main(String [] args) {
     // We need three parameters to do the transmission
     // For example,
     // java VideoTransmit file:/C:/media/test.mov 129.130.131.132 42050
     if (args.length < 3) {
     System.err.println("Usage: VideoTransmit <sourceURL> <destIP> <destPort>");
     System.exit(-1);
     // Create a video transmit object with the specified params.
     VideoTransmit vt = new VideoTransmit(new MediaLocator(args[0]),
                         args[1],
                         args[2]);
     // Start the transmission
     String result = vt.start();
     // result will be non-null if there was an error. The return
     // value is a String describing the possible error. Print it.
     if (result != null) {
     System.err.println("Error : " + result);
     System.exit(0);
     System.err.println("Start transmission for 60 seconds...");
     // Transmit for 60 seconds and then close the processor
     // This is a safeguard when using a capture data source
     // so that the capture device will be properly released
     // before quitting.
     // The right thing to do would be to have a GUI with a
     // "Stop" button that would call stop on VideoTransmit
     try {
     Thread.currentThread().sleep(60000);
     } catch (InterruptedException ie) {
     // Stop the transmission
     vt.stop();
     System.err.println("...transmission ended.");
     System.exit(0);
I m getting this exception
Failed to realize: com.sun.media.ProcessEngine@bd0108
Error: Unable to realize com.sun.media.ProcessEngine@bd0108
Error : Couldn't realize processor

Finaly i was able to solve the problem.The other machine was having some firewall blocking the receiver.

Best settings for Green Screen Video with Canon Mark iii

HI
What are the ideal camera settings for Green screen video.
Iso?
aperature?
Depth of field settings (best to have the green screen a bit out of focus?)
Any other camera settings would be helpful.
Thanks
Rowby

Hi Rowby!
Thanks so much for writing in about green screen shooting with the EOS 5D Mark III camera. Green screen shooting can come down to some crucial elements and how well you handle the camera and the lighting.
Arguably the most important thing is to have excellent lighting on the screen. Without this, the keys used to replace the green screen will not be accurate. So hopefully you have a good set of lights you will be using to actually light the physical screen.
With regards to ISO, shoot as low as possible. We suggest that you stick in the ISO 200-400 range where possible. With good, high key, proper lighting on the screen this shouldn't be an issue.
Aperture should actually be in the higher end of the range, you would want to stick to apertures around f/8 and above. Again, with adequate lighting this shouldn't be out of reach. This is so the green screen is more in focus, versus having it out of focus, which would not yield successful results.
Use an appropriate lens to the subject, for example if you are doing wide shots- use only the focal length needed for the shoot and no wider. For head shots, close ups- use a lens that will get you close.
Following these suggestions should give you some pretty good results. Remember, if this is your first attempt don't be discouraged, green screen shooting can be difficult to accomplish.
We wish you the best of luck in your endeavor!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Are there any apps which will allow local calling using data only that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?

Are there any apps which will allow local calling using data only (not minutes, no extra charge) that do not require any special numbers called out initially and does not require the receiver to have a similar app or account? Just for random local calling.

Yup.
Here is a way you could solve this by adding an extra column and a small lookup table:
The lookup table is here for the copying:
0
1
k
kilo
2
M
mega
3
G
giga
4
T
tera
5
P
peta
6
E
exa
7
Z
zetta
8
Y
yotta
In table 8 (the one on the left in the image) column A is where the values are.
B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
select cell B1, copy,
now select all the cells in column B, paste

What are the settings required to block a particular IP to make connection on particular port no running on another IP?

Problem:
-   What are the settings required to block a particular IP to make connection on particular port no running on another IP?
Environment:
Operating System            : - Windows XP Service
Pack 1
System type                     : - 32 – bit Operating System
Description: - We
have requirement to block Port access from particular IP. It is specific requirement for a machine.
We have service which is running on
Server with IP: - 10.14.15.116 on
Port Number 3366 and we need to
block Client Machine IP: - 10.14.15.114 to make
any connections with server on this port. Not even client machine
should be able to telnet on server on port 3366.
I
will be really thankful.
For any kind of input which can assist us to complete the requirement.

Does it allow in same way with firewall setting in Windows Server 2008?
I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
I
will be really thankful

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

TS3367 If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

I've downloaded some free games for my iphone4 but they are using my internet because they have ads. does anyone know if there are any games that don't have these ads and don't require internet AT ALL?and if i disable my internet connexion, does it help?

i've downloaded some free games for my iphone4 but they are using my internet because they have ads. does anyone know if there are any games that don't have these ads and don't require internet AT ALL?and if i disable my internet connexion, does it help?

Thank you. I put it in airplane mode like you suggested, but it looks to me like all the applications and ads are still running. Anyway, I'm just gonna play when I'm really really bored and use them as less as possible. Thank you again for your quick answer.

How to put restriction/variable in BI 7.0 ? Is there any settings required?

Hello,
I am working on BI 7. I want to know ""How to put restriction/variable in BI 7.0 ? Is there any settings required? I am putting some variables in BI 7.0 while making some query""
amit shetye.

Hi Amith,
just create a new query like a previous versions how u create.. and now select particular charecterstic in the left side window itself.. and drill down it.. and create a variable.. and assign all the properties to that variable.. now drag that particular variable.. in to the Rows or filters..
for Restrictions... put any charecterstics into Free charecterstics.. and right clcik that and select Restriction. now you need to give the values.. based on that it will RESTRICT THE VALUES..
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
http://help.sap.com/saphelp_nw04s/helpdata/en/43/F9D041D6392AE3E10000000A422035/frameset.htm
BI7.0
For greater information on reporting.....
Good Knowledge in BW Reporting
regards
@jay

I have not been able to use facetime on my iPhone 5 and my daughters iPod 5 since yesterday. Does anyone know if there are any problems with apple?

I have not been able to use facetime on my iphone 5 and my daughtes ipod 5 since yesterday...does anyone know if there are any issues with apple?

As these are user to user support forums, there will be no official response from Apple posted here.
Basic forum ettiquette is search before posting, so why post again if you've already searched? Seems rather unintelligent.

TS4185 I can't log into FaceTime or Messages, checked that my ID and password are correct, checked that settings are set correctly. Could it be that latest OS download changed my configurations that disable access?

I can't log into FaceTime or Messages, checked that my ID and password are correct, checked that settings are set correctly. Could it be that latest OS download changed my configurations that disable access?

Update to above question:
Hello All,
To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
So this fix worked for me.
After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
I hope this works for you on YOUR Apple devices.
Bob

Are any special FaceTime settings required to transmit video?

Similar Messages

Maybe you are looking for