Are permissions updated along with system updates?

I have heard that permissions are updated along with system updates and that I should use only the latest version of Disk Utility rather than the Disk Utility that is on the original Snow Leopard install disk. Is this true? In my experience, there are times when the install disk is the best choice for cleaning up a problem.

Sometimes default permissions may change with a system update. In that case there may also be an updated version of Disk Utility.
It's always best to repair permissions using the current version of Disk Utility installed in the Utilities folder. However there may be times when repairing the hard drive and permissions only can be done from an installer DVD. In any event DU relies on a database of permissions, now, rather than a built-in set of permissions. Since the database is located on the system disk that's being repaired it makes little difference whether permissions are repaired using a local copy of DU or the one on an installer DVD.

Similar Messages

Withholding tax lines are being cleared along with other line items

Hi All,
While doing J1INCHLN(payment making of TDS), system giving error i.e.
"Withholding tax lines are being aleared along with other line items"
Please suggest me in this issue...it would be great help for me.
Thanks,
Saisri

Hi,
As per my analysis we found some documents, here We have made advance payment to vendors with TDS and again rised invoce to vendors with TDS and these documents have been nockedoff in F-54.
We have many documents of such nature and as per me it is because of these documents the system is throwing error. Pls. advice as to how to proceed on this.
Thanks,
Saisri

How do i fix the fact that my daughter synced her iphone to my account now I have all of her conacts and most of mine on my phone. my contacts are a mess along with favorites

my daughter synced her 3g in my account accidentally now since ive synced my iphone 4, her contacts and mine are combined and my contacts are a mess . example, my favorites have a few names and numbers but some are gone completely, and in contacts some are gone completely too. VERY Frustrated please help if you can. I use windows xp

I updated to iOS 5.0.1 days ago and didn't receive that notification until just now...
This time I synced new photos I took yesterday, and it gave me the:
"iTunes Sync: 54 items could not be synced. See iTunes for more information"
Perhaps it kicks off when new items get synced.
I've decided to rent a movie yesterday. Once it gets deleted, I'm curious to see if it jumps to 55 items.

Sound problem(earphones are okay ,checked with my pc)problem is when i listen songs on ipod,unwanted sounds along with songs is produced..so music is not cleared.How to remove these noises or unwanted sounds...pls

sound problem ..
unwanted sounds are produced continuously along with played music while listening .. earphones are ok(checked with PC)

sound problem ..
unwanted sounds are produced continuously along with played music while listening .. earphones are ok(checked with PC)

Obiee 11g show title along with no results.

I have a requirment to show no data when there are no results along with the report title at the top.In obiee 11g when i get the no results the title view is dissapearing.Is there any way were i can get both the title along with no results without going to CSS .

852873 wrote:
I have a requirment to show no data when there are no results along with the report title at the top.In obiee 11g when i get the no results the title view is dissapearing.Is there any way were i can get both the title along with no results without going to CSS .Check this out:
http://docs.oracle.com/cd/E14571_01/bi.1111/e10544/analyses.htm#i1010759
Click on the "Displaying the Results of Analyses" section and then scroll down to "Alerting Users to No Data in the Results of Analyses."
In the Header field, you can enter the title of your report, then customize your message in the Message field.

I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen

I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen

So what happens when you connect to iTunes?

HT4759 My mac mini is not updating its software to OSX Lion v10.7.5. I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8.

My mac mini is not updating its software to OSX Lion v10.7.5, which I need for iCloud. I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8.

You need to get the newer version from the Mac App Store.
(70404)

There are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

there are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

Do you get an error number? What is the exact message?
Two things to try.
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store.
If that doesn't work, try an App Store reset and then try again.
App Store Reset Learned from Old Toad
There is a contact link.
App Store Support

System settings are being updated??

I bought an eMac from a friend of my husband's, and there wasn't the Safari icon to connect to the internet. So, I clicked on the apple icon at the top left of the screen, then clicked on Mac OS X, and it would usually open up the internet browser and I could surf the web from there. Well, my husband was messing around with the computer to try and figure things out, and now when I click on that same thing a gray box pops up in the middle of the screen and says that my system settings are being updated and it's unable to open my preferred web browser and I need to try again in a few minutes. This started last night, so it's been well over 24 hours, as we let it set there thinking it just wasn't finished updating. How do I get rid of that?

Hello Mrs. Long,
Did you get the 10.4 Install Discs with it? If so power down, hold mouse button down at power on to open the tray & inset Install Disc, hold Option/alt key at same time to bring up the Startup manager so you can choose the Install Disk to boot from.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

Thanks to Bobthefisherman & Turbostar. Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid. Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced.
The HD wasn't partioned by the way. And I did have just over 40GB of contiguous space.
Thanks again.

I updated my iPod Touch to 6.0.1. after much prompting. Now my music is gone! (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back on it??

I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

WSUS throwing 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal."

Hello,
Within the past two months our WSUS Server started throwing error 13002, "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal." We currently have 252 computers with errors in WSUS,
and 33 updates with errors. We have never had issues up until two months ago. If you keep rebooting the machine, and keep running updates, they eventually all install. I believe I will see the machines with errors go away as the weekly scheduled
WSUS install runs over and over, and the machines reboot.
- We run IE8 in our environment and sometimes IE9.
- We have 300 clients, all running Windows 7 SP1 x64.
- Our WSUS server is running on Server 2008 R2. The WSUS build number is 3.2.7600.262.
- We created an alternate WSUS 4.0 server on Server 2012, and redownloaded all updates. We put one client on it and it is showing errors on 3 updates, KB890830, KB931125, and KB2917500.
- Clients are throwing errors 800F0902, 80242016, and 80070005.
- I've noticed something with the C:\Windows\SoftwareDistribution\Download folder on the clients. When an update runs and fails, there is a "Install" folder created inside this folder. If you try to open it after the failure you get
"Access Denied" If you reboot the machine, the install folder goes away. (I assume this is a temp folder created to run updates). I've checked the permissions on this folder on various machines and all seems normal. I think
this is the root of the problem, and why we need to keep rebooting to get all of the updates to run.
- I tried deleting the Software Distribution folder on a client after stopping the update service, then restarting the update service. The folder redownloads but the client still throws errors.
- I've gone through our Group Policies looking for anything that can cause this and found nothing. We've created a test OU blocking inheritance, and only applying a WSUS policy in it to make it get the updates internally. I then rebuilt multiple
machines using Dell KACE, and still had failures.
- We run SEP 11 and 12 on our clients. I've tried removing the AV, making sure the firewall was off, etc. It still throws errors.
- I've spoken with our network team, and installed wireshark on a few clients looking for network errors and found nothing.
- I've tried various Dell KACE scripted installs on test machines (erasing and rebuilding the machines from scratch), after which I run Windows Updates from WSUS. They have thrown errors.
- I've rebuilt a machine using Dell KACE, undomained it, then ran updates externally from WSUS going to Microsoft's site, and I'm still getting errors.
- I've tried removing all software from the Dell KACE build to where it is just installing the OS and I'm still getting errors.
- I tried taking a plain Windows 7 x64 DVD and installing that on a test machine, then without domaining it and without installing any other software, running updates from Microsofts update site. This seems to work, althrough it does throw some errors
but I believe those are related to having to reboot your machine in order to complete the updates (I can't remember that error code at the moment).
Has anyone else been experiencing this? Any suggestions as to how I can fix this?

Hi,
Error 800f0902
Please try the method in this thread:
Error
Code: 800f0902
Error 80242016
If you receive Windows Update error 80242016 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers.
80070005
Usually means access denied
Since it worked perfectly for a while, did you make any change on the server? Any applications new installed on clients?

Unique file name to be decoded and to be updated in a table along with data

Hi
I'm working on a File to Proxy scenario, where the file names(10 chars length) are unique. These files will be available for XI in a source directory. My requirement is -- file name need to be decoded into 3 values and to be updated into a r/3 database table along with the file data.
Hope my requirement is clear.
Thanks.

You cannot see the field which stores the file name. The file name comes from payload at runtime.
Secondly no need to create any input parametes in your UDF, just edit your udf and delete the input parameter (default input is 'a') so that you don't have to map any constant to this UDF just map this UDF to target field.
e.g. UDF ---> target Field.
I did the same but am not able to activate the mapping.
Mapping activation Error:
Activation of the change list canceled Check result for Message Mapping hello_mapping | http://briks.com:
Mapping not sufficiently defined
Chennai.

Yesterday an update on software to get the facetime to work. It downloaded along with eight other updates an Itunes update now I cannot even get Itunes to open I am now completely frustrated

Yesterday I did an update on software to get the facetime to work. It downloaded along with eight other updates an Itunes update now I cannot even get Itunes to open I am now completely frustrated Now two applications are not working. Help

Hi,
I tried opening it from the application folder and nothing happens. I have tried from the dock and the same thing. Unfortunately this is not the application that I ws intending to work on. This was running perfectly fine for me. I have a lot of music on it. I know all is still there because I can see it through spotify. I started looking for help with Face time with came up with a needing proper credentials in order to open. Now neither open after a 9 an automatic download of nine updates. At this point I don't know what else to do.

HT201412 I was trying to update my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?

I was trying to update operating system of my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?

Is your iphone hacked/jailbroken?

Are permissions updated along with system updates?

Similar Messages

Maybe you are looking for