Arrrgh. Recording video in Portrait and playback in Landscape

Ok so I start recording a video in portrait mode by mistake, and realise I don't want to do this so rotate the phone into landscape view, and continue recording.
The entire clip is now useless because it is flagged as a portrait clip, so regardless of the orientation of the phone during playback it will present the video as a portrait video.
Playback in portrait mode, it shows full screen, but when I rotated the phone while recording, everything is now sideways.
Playback In landscape mode it displays the video much reduced in size in portrait in the center of the landscape view. Worse still, when I rotate the phone in the video, this is now displayed sideways in the shrunken portrait view in the middle of my landscape screen. So I still can't watch the video WITHOUT turning my head on it's side.
There needs to be some way to edit the landscape flag on the clip and set it to portrait (and visa versa) so that in this example, I can set the clip to landscape, trim of the unwanted portrait bit at the beginning and be left with the landscape video clip I originally intended to record.
As the phone functionality stands at the moment, the clip is rendered useless.

()z wrote:
Ok so I start recording a video in portrait mode by mistake, and realise I don't want to do this so rotate the phone into landscape view, and continue recording.
The entire clip is now useless because it is flagged as a portrait clip, so regardless of the orientation of the phone during playback it will present the video as a portrait video.
Playback in portrait mode, it shows full screen, but when I rotated the phone while recording, everything is now sideways.
Playback In landscape mode it displays the video much reduced in size in portrait in the center of the landscape view. Worse still, when I rotate the phone in the video, this is now displayed sideways in the shrunken portrait view in the middle of my landscape screen. So I still can't watch the video WITHOUT turning my head on it's side.
There needs to be some way to edit the landscape flag on the clip and set it to portrait (and visa versa) so that in this example, I can set the clip to landscape, trim of the unwanted portrait bit at the beginning and be left with the landscape video clip I originally intended to record.
As the phone functionality stands at the moment, the clip is rendered useless.
iPhone video plays back at either 640 by 480 pixels, 30 frames per second, or 1280 by 720 pixels. This is not "landscape", this is how video is played. Have you ever seen a movie that's 720 X 1280?

Similar Messages

I work for a teaching hospital. We are using groups of 20 to 30 iPads for access to patient electronic records, video conferencing software, and other, HIPPA compliant apps. I need to be able to access the iPads to shut down and erase in case of loss.

I work for a teaching hospital. I have started a program to place Physicians and key support personnel on iPads for electonic medical records, video conferencing software, and other HIPPA compliant issue. I have a need to have one central program that can push out updates, other information, but most importantly, can erase the iPad in cases of loss or stolen. Can anyone direct me to such software.
Thanks,
Wayne Hodges

The Mac mini does have somewhat powerful specs at top end.
Mac mini with OS X Server features a 2.3GHz quad-core Intel Core i7 processor that delivers incredible speed and performance, thanks to innovations like Turbo Boost 2.0, Hyper-Threading, and an integrated memory controller. Add in 6MB of L3 cache, and you’ll find that Mac mini with OS X Server is packed with power.
http://www.apple.com/mac-mini/server/
Here is a list of mdm's:
MDMs
Airwatch, Meraki, MobileIron, OS X Server, or Zenprise
Airwatch
http://www.air-watch.com/
Meraki -- A free MDM [ expect lots of email and phone calls about upgrades ]
http://www.meraki.com/products/systems-manager/
https://discussions.apple.com/thread/4067210?tstart=0
Good howto by Sergio Sosa.
https://discussions.apple.com/thread/2594001?start=15&tstart=0
MobileIron
http://www.mobileiron.com/
Zenprise
http://www.zenprise.com/

Recording video, pausing it and resume recording video

While recording a video on the iPhone 5S, it can pause the video recording for a while and it can resume back the video recording as well just like that?

60FPS will make the video smoother and is better when capturing fast moving objects. A higher FPS will however make the video file larger and if you plan to play the video on another device that device must also support playback of 60FPS.
The auto mode uses 30FPS and there's no setting to change this.
If you take a picture while recording video in auto mode it will have the same resolution as the video, 1920x1080. You can see the resolution of a picture if you open it in Album and tap [menu] -> Details.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Record video into finalcut and audio multitrack into logic in sync

Hi,
I'm an experienced logic user but new to video.
What is the best way to record video and audio multitrack!! synchronously?
Can I record video direct to my harddisc and synchronously record audio into logic or soundtrack pro? We have two separate macs available.
-Can I connect finalcut with logic via rewire or do I need additional sync hardware?
-How can I start record simultaneously for finalcut and logic?
-Do I need finalcut pro?
-Can I record video and audio directly and simultaneously into soundtrack pro or finalcut?
I currently work with a cutter who uses canopus but assign each video take to each audio take is so time consuming. There must be a better solution for video production.
Any feedback appreciated,
Thanks Eddie

I may be wrong about this, but AFAIK…
Can I record video direct to my harddisc and synchronously record audio into logic or soundtrack pro?
No.
-Can I connect finalcut with logic via rewire or do I need additional sync hardware?
FCP is not ReWire compatible.
-How can I start record simultaneously for finalcut and logic?
You can not.
-Do I need finalcut pro?
Maybe, but I can't say one way or the other. What is your goal with video?
-Can I record video and audio directly and simultaneously into soundtrack pro or finalcut?
You can record directly into FCP, either via FW or SDI (if you have supporting hardware)
I currently work with a cutter who uses canopus but assign each video take to each audio take is so time consuming. There must be a better solution for video production.
Not familiar with Canopus, so I can't comment.
Any feedback appreciated,
Some editors find the term "cutter" to be an unfair characterization of what they do. We do waaaaay more than just cut out the bad takes!

N97 recording video goes light and dark

Has anybody else noticed that when recording video it seems to go light and dark as if it cant decide what contrast to record in, it isnt a major issue but just wondered if anybody else had the same problem?

Hi
I have found the solution..
Insert supported microsd card into card slot and set this memory card for camera.
I mean after card installation go to camera options and change the setting for memory in use to memory card.
it's tested and working fine
Enjoy

Choppy video on import and playback

Hello everyone,
I just got an ADVC-55 AD video converter for my Mac quad 2.8. (I am running 10.5.4). When I try to import the video from the VCR via the firewire-connected converter, the video+sound as it is being imported is choppy. This remains choppy on playback once recorded, as well. The same results were for iMovie '08 and iMoveHD '06. In general, when importing movies into the computer, is using iMove '08 better than iMovieHD '06? (I know that iMovie is better for chapters and such for editing once in the computer).
I have tested the VCR on my TV and it is smooth with the same source tape and machine.
This converter is supposed to be plug and play and there are no drivers or software that comes with it. There are 6 dipswitches and these are all set to off.
Drive is a Seagate Barricuda 7200, with 300 gigs free...
Are there any setting I should change to fix the choppiness?
Any help is appreciated,
Thank you for you time.

Steve:
As good practice save the project as a disk image (File->Save as Disk Image menu option) instead of burning directly to disk. This allows you to play the disk image in DVD Player to verify that the encoding of the project was good. If the project plays OK in DVD Player you can then burn that disk image to disk with Disk Utility at the slowest speed available. If there is any problems with the disk playing it can then be narrowed down to the burn process. Also use the top grade media. Verbatim, Taiyo Yuden or Maxell -R are the most recommended brands in this forum.

How to record video in black and white mode

Hi,
I am developing a live video recording application and my application have black and white mode recording feature, So please give me some idea about black and white recording.
Thanks
Ram

Your 1200 is fine it will print in B&W using these settings:
in the print driver drop down box, select Color Options and tick the print in Greyscale option
then click in the Presets dropdown and select save as and type in a description such as " Black and White"

Record video from camcorder and separate sound source direct to mac?

Hi. I want to make a video of myself playing piano (or whatever) with high quality sound. I bought a nice Panasonic mini-dv camcorder with a mic input, firewire, and USB for the job. Unfortunately the sound is ruined by the camcorder's compression kicking in and spoiling the quiet parts. Apparently the compression can't be turned off.
What would be ideal would be to record straight to the Mac with the video coming from the camcorder and the sound coming from my high quality mics. I could send the sound either as analog or already converted via firewire or lightpipe.
Help?

I'm running two serious condenser mics into a "board", panning one left and one right and sending them out stereo into the camcorder. Even with external mics the audio compression still kicks in and tries to bring up the quiet parts, which not only destroys the dynamics of the music, it brings the noise floor way up so that it's quite audible.
My camcorder is a Panasonic PV GS65, which in 2005 was the cheapest 3CCD camera they made. The video is quite good but very few cheaper camcorders have mic inputs, let alone manual record levels.
I've never tried making movies before but after messing with Windows Movie Maker for a few minutes I've discovered that all I have to do is plug my camcorder into a firewire port and I'm ready to go.
It turns out that whether I use Mac or PC for video, I won't need the mic input in the camcorder after all. I'll record the audio into Logic Pro 8 as I shoot the video and one way or the other I should be able to sync them up pretty close.
My question still remains however: Is it possible to record the sound straight onto the video file from a separate source while shooting the video? Or is it only possible to record the one firewire source from the camera?

GLC: Recorded video has red and green flashes

I tried Googling for a solution but GLC appears to be such an obscure program that none of the results are even related
I finally got GLC working mostly correctly on Arch64. It records my game in Wine, but when I play back the video it has a red or green "flash" every few seconds that is really disruptive. I know glc-capture has a bunch of options, but I'm not sure what most of them do so I was hoping somebody knew how to fix this problem without me trying different combinations of options until something hopefully works.

Alright I've done some more playing around with it but I don't think I'm any closer to a solution.
I've tried pretty much every command line switch to GLC that I think could have any effect at all but nothing changes. The game in question I'm trying to record is EVE Online. The intensity of the flashes seems to vary throughout the recording, here's what I can gather:
- No flashes at all during the login screen (which does have a bunch of 3D rendering, it's not just a flat text box or anything)
- Moderate flashes when flying in space, primarily when I try to pan the camera
- Video goes to complete garbage when I dock in a station. Not a single frame from inside the station is output to the video, it just loops the last in-space frames with lots of colors and other garbage obscuring the screen
I can upload a video if anyone thinks it would help. I'd really like to get this working, GLC appears to be the only program under Linux that can be used to record games. It seems like I'm so close to a solution yet so far away.

Lightroom 4 video black thumbnails and playback

On loading I see thumbnails for avi videos for about a second and then they go black. On playing in Lightroom the screen is black but the sound is fine. The videos play correctly in Quicktime and other programs.
Any suggestions on how to fix this?
LR4 Windows 7, Core i7, ATI Mobile Radeon HD5850, 8Gb RAM

I used a video conversion program to convert to a different codec. It probably does not need a full codec pack installed, just the coded changed. Google 'codec changer software'. I have not tried any of the free ones so make sure that you make a copy of any file before converting it if the program overwrites the original file.
http://download.cnet.com/windows/video-converters/?tag=bc has some programs

Can you replicate the video DVD autolaunch and playback on a Flash drive?

I'm creating a motion graphics presentation in Motion and I normally burn these to DVD with DVDSP where it automatically plays when you insert it into a DVD player or computer.
My client wants to distribute the presentation on Flash drives, though, and give those out. My thinking is that a Flash drive is only data and so we would need to distribute the presentation as a QT movie file, which would require the end user run the file.
There's no way to make a computer think a Flash drive is a video DVD, is there?
Thanks!

Thanks for the reply.
Yeah, the companies you buy those custom USB Flash drives from will put any file you want on them and I'm familiar with the auto run .ini option in Windows. The problem with that is playing a QuickTime movie file on a PC or Mac doesn't look as good at full screen as a video DVD, in my opinion, and the end user would have to manually tell it to go full screen. Finally, not all computers have the auto run feature enabled because of the virus issue you cited, and the end user would have to right-click on the drive and select "Explore" in Windows, or find the file in the Finder, and then manually run it.
Video DVD is great because it looks great at full screen and it's platform agnostic. If you insert one into any computer with a DVD drive, it will either auto play or it will give the user a dialog asking them if they want to play it.
But from a marketing perspective, the USB Flash drive is better because when you give them out to people (with your company's logo on it), people are more likely going to use it and see your presentation versus a DVD disc.
Thanks!

Recorded a video in portrait mode and want to switch it to landscape mode is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone

is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Android / IOS Record Video and play with it ?

Is it possible to record video in Air 2.6 to mobile ?
I know I can getCamera... but after it, can I record ?
My goal is to make App that record video with the camera and push effect on it.
Tank you!

You can definitely record video on both and have the data at your disposal. As far as I know you cannot select a video from the "video roll" though so you will have to edit only the video you just recorded:
private var cameraRoll:CameraRoll = new CameraRoll();
private var dataSource:IDataInput;
        private var eventSource:IEventDispatcher;
vid_btn.addEventListener(MouseEvent.CLICK, openVideo);
private function openVideo(evt:MouseEvent):void{
deviceCameraApp = new CameraUI();
if( CameraUI.isSupported )
                log( "Initializing camera..." );
                deviceCameraApp.addEventListener( MediaEvent.COMPLETE, videoSelected );
                deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
                deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
                deviceCameraApp.launch( MediaType.VIDEO );   //Changing this to IMAGE will make it take a picture
               else
                log( "Camera interface is not supported.");
private function videoSelected( event:MediaEvent ):void
            log( "Media selected..." );
            var videoPromise:MediaPromise = event.data;
            dataSource = videoPromise.open();
            if( videoPromise.isAsync )
                log( "Asynchronous media promise." );
                eventSource = dataSource as IEventDispatcher;
                log( eventSource );
                eventSource.addEventListener( Event.COMPLETE, onVideoDataComplete );
**At this point, when the onVideoDataComplete function fires, you will have access to the bytes of the movie:
private function onVideoDataComplete(evt:Event):void
            var videoBytes:ByteArray = new ByteArray();
            dataSource.readBytes( imageBytes );
            //the rest of this is just testing what we actually read
            log(videoBytes.length);
            videoBytes.position = 0;
            var string:String = videoBytes.readUTFBytes( 300 );
            log( string );
**You can then do whatever you want with the bytes, such as save it to your local storage directory as a .mp4 and load it into flash
Does that help?

ISight - Photo Booth stops recording silently when recording video.

Hello,
I often use iSight and Photo Booth to record videos, and I've observed this error happens all the times:
For example I record a 5 minutes video, (I stop Photo Booth at the time 5:00), but then when I look again at the file, it's less than 5 minutes. This happens 8 out of 10 times of recording, and it stops silently at a random time, means photo booth does not return to the waiting mode until I press the stop button.
Does anyone have this problem? Please help. Thanks in advance.

I must agree I am having a very similar problem myself. In my case, for example, I use photobooth to record videos requiring audio and video (acoustic guitar) and I will record one video which will be fine with audio, but randomly, the next video I record will not have any audio whatsoever, just a video of me playing my guitar. I'm sure other people with this problem know how frustrating it is, especially since I just tried to record an instrumental piece about 13 minutes only to find that photobooth randomly decided not to record audio this time....is there any solution for this?

I was trying to adjust the latency issues i was having. something happened and i hear a very loud squeal. deathening.now when i listen to playbach thru my headphones i hear crackling sounds. if i were to bounce and playback thru i-tunes, i don't hear it.

if i record w/out monitoring and playback on i-tunes. sounds great. monitoring recording thru headphones gets a crackling sound that has a bit of delay or reverb. i use tascam us-122mkII interface. help!

if i record w/out monitoring and playback on i-tunes. sounds great. monitoring recording thru headphones gets a crackling sound that has a bit of delay or reverb. i use tascam us-122mkII interface. help!

Arrrgh. Recording video in Portrait and playback in Landscape

Similar Messages

Maybe you are looking for