Recording video, pausing it and resume recording video
While recording a video on the iPhone 5S, it can pause the video recording for a while and it can resume back the video recording as well just like that?
60FPS will make the video smoother and is better when capturing fast moving objects. A higher FPS will however make the video file larger and if you plan to play the video on another device that device must also support playback of 60FPS.
The auto mode uses 30FPS and there's no setting to change this.
If you take a picture while recording video in auto mode it will have the same resolution as the video, 1920x1080. You can see the resolution of a picture if you open it in Album and tap [menu] -> Details.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Similar Messages
-
hello, i have youtube videos on my iweb site. but i would like to know if it is possible to get a 'pop-up' affect when you click on a small photo of the video, to open and play the video in a popup?
we have tried using video light box, but this doesnt seem to work.There's an example of one at the buttom of ths page...
http://www.iwebformusicians.com/Website-Movie-Video/YouTube.html
Rather than link to the file, the movie is on a separate web page and uses the code shown on this page...
http://www.iwebformusicians.com/Website-Photos/Image-New-Window.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
I'm having problems with video play back in itunes 10.7.0.21 for windows 7. Video was playing fine, but now I'm having audio issues. Audio cuts in and out. Also video pauses and fast forwards. Does anyone know what would cause this all the suddenly? More importantly does anyone know how to fix this?
All sorted now. Thread can be closed!
-
Oracle Video Server information and support IP video livelife picture
Hi Friends,
Where can we find more information for Oracle Video Server and application?
Does Oracle Video Server support life video stream to display from IP video/Canera?
We test OMNicast video server. I found MS SQL server support this video server.
however, my application is oracle project. We like to bind oracle mapview with video application. Note. Not files based video application. It is live picture stream from IP video/camera.
Welcome any suggestion
Thanksthis is my find OVS info address
http://www.iagr.ucl.ac.be/manuels/oracle/video217/A43822_04/adm_conf.htm -
Getting a Rendering Error "No Video in File" and now corrupted video file
I've been working with some video footage in Final Cut that I recorded directly to my hdd using adobe Onlocation. I used the chroma key filter on it and then added an animation clip from After Effects, in the form of a .mov file to my timeline. When trying to render my timeline I get the "no video in file error."
I used the render manager and trashed all the render files, then I manually searched my hdd and trashed any other render files I could find. Still getting the same error message. Gave up and decided to start from scratch except that now my original video file that I recorded with Onlocation is corrupted and I can't preview it in Quicktime nor play it in Onlocation. It also imports into final cut as a white screen.
This is the only copy of the file I have (I know, stupid me right?) so any help or suggestions would be greatly, GREATLY appreciated.Thanks so much for your suggestions, the File Salvage option from digital rebellion worked!! Good as new!! made a backup and going to attempt to complete my project, but any ideas on why adding the AE clip to the timeline caused the corruption of the video file in the first place?
-
How to insert some records in one table and some records in another table
Interview question
how insert records in two tables by using trigger
CREATE or REPLACE TRIGGER Emp_Ins_Upd_Del_Trig
BEFORE delete or insert or update on EMP
FOR EACH ROW
BEGIN
if UPDATING then
UPDATE emp2
SET
empno = :new.empno,
ename = :new.ename
--, job = :new.job
--, mgr = :new.mgr
--, hiredate = :new.hiredate
, sal = :new.sal
--, comm = :new.comm
--, deptno = :new.deptno;
sdate = :new.sdate,
edate = :new.edate
end if;
if INSERTING then
INSERT INTO emp2
VALUES
( :new.empno
, :new.ename
--, :new.job
--, :new.mgr
--, :new.hiredate
, :new.sal
--, :new.comm
--, :new.deptno
new.sdate,
new.edate);
end if;
if DELETING then
DELETE FROM emp2
WHERE empno = emp2.empno;
end if;
END;
it is working fine but he wants to insert some specific litimit on one table and some specified limit of records in one ..
In this senerio can i insert records by use count of records...
please help me..Can you be more specific on the "Limit"
Conditional insert can be used in this case. -
Hi,
I created a PDF form where I have open, next, previous buttons, and I'm able to connect to the access database, and it's working fine. Now, I want to be able to search by last name from the access database, and retrieve the results in a dropdown field, and then once i select the records in the drop downlist, i want to press a button to display the record. I have multiple records with the same last name. Please help, I searched the internet for hours, and can't find something similar. Your help is appreciated, and sample code is appreciated.<%
int count = 0;
while (rs1.next()){ %>
<%if (count ==0)
{%>
<option value="<%=inputorthodon%>" selected >
<%=rs1.getString("ortho_name")%></option>
<%}
else{%>
<option value="<%=inputorthodon%>">
<%=rs1.getString("ortho_name")%></option>
<%}
++count;} %>
</select>
U may have to format this a bit. The idea is to use a count variable to put "selected" in only the first OPTION. After that, we don't have to.
Hope this helps. -
Pause, Stop and Resume buttons
Hi Everyone,
I've got a fairly short little animation sequence that the folks here at my work would like to insert into one of our web pages on our site. It's a demo on how to use one of our products, so I'd like to add a few buttons so the user can pause and then resume the entire movie. There is absolutely no scripting applied to the FLA right now.
Could someone please get me started with this? I've been working on another project that involves scripting some buttons with AS3, so I have some knowledge, but am still having a lot of difficulty, so any help would be appreciated.
Thanks.To stop/pause a movie you command it to : stop();
To play/start a movie you command it to: play();
That's really all you need to have your buttons do in their event handler functions. -
I made a website which runs locally in a public museum. So I need to use firefox in fullscreen always, so that the customers would not have acces anywhere else but the site I created. I used HTML5, and JWPlayer for watching the videos.
There was no problem like this in the computer I made the site, but in the exhibition computer this problem appeared. I tried to run it in Kiosk mode using R-Kiosk, but it did no good.Kyseessä on sen verran erikoisosaamista vaativa ongelma, että tämä on käytännössä väärä foorumi ongelmanratkaisun kysymiseen. Voi toki olla, että joku tietää, mutta en veikkaisi sitä. Sori seuraavalle luukulle ohjaamisesta, mutta tässä tapauksessa on se on paikallaan.
Yleinen kehittäjäresurssi (joka on varmaan hyvin tuttu on) MDN https://developer.mozilla.org/ ja sen mukaisesti keskusteluryhmät (newssit) ja postituslista on oikeita osoitteita. Suosittelen siis sinne kirjoittamista. -
Hello,
Is there a way to allow users to pause a presentation where a working application was captured? And if so, can the users resume where paused?
CathyAre you talking about bookmarking a Captivate module at a given point so that you can close it down and later begin again at that point?
If so, Captivate has a couple of mechanisms used for this, including:
The Self-Paced Learning option in TOC settings will store the last visited slide in a cookie on the user's PC and return them again to this slide on next session.
If using an LMS, Captivate can store the user's last location in Resume Data. Not all LMSs work well with this.
Neither of these solutions will bring you back to the exact point where your learner left off. But they can get as close as the beginning of the nearest slide. -
Question about converting video to jpeg and back to video
Is it possible to import a digital video sequence into photoshop and convert it into individual frames, so that each frame can be manipulated individually (drawn into, coloured etc) and then reform the individual frames into a video file for export toAfter Effects, Premier Pro or Avid?
[email protected]
http://www.artalis.co.ukHi,
I do not know Photoshop very well, but I know that you can import your video into After Effects, then export out an image sequence from there - TGA or other "Lossless" codecs. Then you would have individual frames to work on. Once done, you could use Media Encoder to get a good quality export from the individual images back to video.
Pierre -
Pausing, quitting and resuming in Captivate
Currently, our course developing tool allows users to quit a
course and their progress is somehow saved so that when they
re-open it, the course starts up where they left off.
I am wondering if anyone knows if this feature is available,
or even possible, using Captivate?Captivate supports resume data if you're using a reporting
standard that supports it (primarily SCORM).
I've read that doing so is somewhat problematic in that
suspend data is apparently being sent on the last slide, which
means that the user will be taken directly to the last slide if
they return to a completed lesson and say yes to the "Do you want
to pick up where you left off?" message.
For this reason, some folks on the forums advocate turning
off resume data (in Captivate 2, it's done via the LMS
Customization Settings button in the Quiz Manager). There's also
been some discussion in a few threads on how to "fix" this behavior
by hacking into the Javascript code that submits results
information. Unfortunately, doing so is beyond the skill level of
most folks, hence the preference to turn off resume data
entirely. -
Webcam Video pauses when recording sound from microphone
I have a strange problem which i am encountering when recording and playing back webcam video.
I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
I am using AS 3.0, FMS 3.5 and flash CS 5.5
When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
I tried using the flvplayback component and even their it pauses.
Any help is appreciated.Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.) -
Record enable light flashes and does not turn red
I have two input mics with which I wish to simultaneously record into garageband 10. I have selected the "record enable" button in the track header, and I have allocated each audio input to the appropriate audio interface channel. The record enable buttons only flash at me and do not allow for multitrack recording--that is, unless I have selected a single specific track which then allows the track to be armed for recording.
VeeRonna wrote:
I have allocated each audio input to the appropriate audio interface channel.
it always helps to give us complete information; to what did you set each track?
VeeRonna wrote:
I The record enable buttons only flash at me and do not allow for multitrack recording
the flashing is normal. what happens when you record enable 2 tracks and begin recording?
i saw in another thread that you watched the multiple interfaces vid, perhaps the multi-track recording entry would be more appropriate:
http://www.bulletsandbones.com/GB/GBFAQ.html#multitrackrecordinggbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Previous and next records in a table
Let's say I have a table where I have
item name sequence customer number
I want to select these three fields where name = 'INSPECTION', but I'd also like to grab the record prior to this and the record after this, regardless of the name content. I need to do it for each customer number.
Is it possible for a novice like me to do?
Thank youWhat is "next record" and "previous record" for you in this context? A database table doesn't have records in any specific order. They have an arbitrary order.
If for you, the records have the sequence as an ordering information, then you could use LAG and LEAD functions.
Maybe you are looking for
-
I get nothing but error messages, - "Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364? Now there are hundreds stacked up on my desktop. I cannot find the answer anywhere. You need to giv
-
Songs from same album splitting into seperate albums
I have had this problem a few times and have been able to work through it, until now. I have ripped albums onto itunes and had themshow up as 2 or 3 different albums of the same name on in the album art viewer on itunes. Last night I did a Trans-Sibe
-
Leave request mail in different languages
Hello, we are using the leave request functionality for different countries. The report RPTARQEMAIL is scheduled as a daily job, but sends the emails in english only (the schedule user is defined with language 'EN'). We changed the english text of th
-
Display a variable d'user exit as text in the title of a colomn
Hi, experts, I would like to calculate the number of days of a certain month. This calculation would be done in the user exit. Then in the report, this number will be displayed in the title of the colomn. Is it possible to realise this requirement an
-
Problem with specific charactor "ส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้ "
Noise will appear if specific charactor "ส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้ " showed on the web page. No poroblem with Asian (CJK) charactor. (symptom as below:) https://www.facebook.com/photo.php?fbid=166744676837352 PC: Toshiba Satellite L365D Video :