Article assortment listing

Hi Gurus
While performing article assortment listing, on creation of new site thesystem is blocking other users from using the articles. We have been
informed that there is release note in SAP IS Retail version ECC 6.0,
where assortment listing can be done for a site without effecting article
transaction for other sites. Please furnish as with the release note
reference or an alternative suggestion.
Steps for Reconstruction
1. Site creation - WB01
2. WSOA2 - For assortment listing and maintenance of article for a new
site ( System will generate a background job for an assortment of all
articles to new site. )
Thk
Sachin Vispute
Edited by: sachin vispute on Jun 26, 2009 6:55 AM

Thanks,
If so, then what is the diffeerence between listing through assortmrent and listing through layout. Need to do listing through layout / layout module. How to do that with out creating assortment.
Is it possible I list through layout without entering assortmwnt in WLAMN.
Thanks again
Varatharaj Jayraman

Similar Messages

POS outbound assortment list - deleted EAN's/delisted articles

hi All,
does anyone know whether it is possible to send a deletion indicator down to POS for the assortment list? IT seems that deleted EAN's trigger a change pointer but WBBDLD IDoc only contains the updated article details only. Also, when an article is delisted from a site, is it possible to send a deletion indicator as well?
REgards,
James

Hi James,
in the assortment list customizing it is possible to activate sending of delisted articles.
Please check the the profile parameters.
SPRO -> Logistics - General -> Assortment -> Assortment List -> Maintain Profile for Assortment Lists
Here the flag
DELETION for LISTINGS
For details please look at documentation.
If you are using the HPR (High performance Retailing) Assortment list, this will be not possible. In this case you have to initialize the list. Deleted articles will not be a part.
regards
Björn

Assortment List - Price List

Hello,
I have an article with valid two prices (condition VKP0):
- sales organization and distribution channel (Table A073);
- Price list (Table A155).
In Access Sequences and Filter Settings for Condition Types (assortment list), the price list has priority.
When you generate the assortment list by trabsacção WDBM the system determines the price set for the sales organization.
Have ideas to solve this problem?
Thanks,
Vera Monteiro

Hi Vera
I am facing the same/a very similar issue. A colleague suggested a possible solution which didn't resolve it for me but it might be worth checking if it works for your scenario?
How are you assigning the site to the price list - centrally in the site customer's sales area view under pricing or by material group (merchandise category)?
Please check the IMG:
Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control -> Define Access Sequence:
Maintain Access Sequence
Select VKP0 Accesses view
Select Table 155 Fields view
for condition PLTYP the Doc.field should be PLTYP if you assign site to price list centrally, but if you do it by material group it should be PLTYP_P.
I am still working on my issue so I will let you know if/when I find a solution. Please can you let me know if you resolve it first?

No change triggered for assortment list IDOC

Dear all expert,
I'm facing a problem and below is issue reproduction steps.
1. Article 'A' listed to Assortment 'ASM01' which is assigned 3 sites as assortment users.
2. I executed WDBI for assortment list initialization. 3 IDOC files are generated successfully.
3. Now, I unassigned one of the site from the assortment ASM01.
4. I execute WDBU for assortment list IDOC change message. No IDOC is generated for this site.
Any idea?
Thank you very much!
Regards,
Wso

Hi Tobias,
Thanks for your reply!
Actually i'm newbie on SAP Retail and now looking at listing and assortment stuff. I've configured the Assortment List Profile with checkbox 'Deletions for Listing' selected. Below is the SAP help explanation:
"Indicator: Generate Deletion Records for Listing
When you set this indicator, special material header records, carrying the information from the store retail system about the deletion performed, can be sent during deletions of assortment assignments between plant and assortment or during physical deletions of listing conditions in the change version of the assortment list. In the IDoc, these materials are marked with the change indicator AENKZ = 'DELE' in segment E1WBB01."
So i wonder a IDOC file will be generated for the unassigned site with change indicator DELE for all articles listed to that site.
Thanks again!
Regards,
Wso

Assortment list: Missing data values & structure modification

Hello all,
I have the following problem:
1. I'm using the assortment list (not HPR version) with the structure WBBP_MAX to download data to the local system that is connected to a POS system. I know that this structure is a really massive one, but I'm planning to reduce it (see my number 2 question). The TC I'm using is WDBI\WDBM. Release version ECC6.
When I'm executing the assortment list initialization\manual I have a missing values problem when displaying the AL for example: the purchasing prices (E1WBB08 - KWERT) appears in the generated Idoc (basic type WBBDLD04) but when I'm displaying the created assortment list, the values for the sales price do not appear . In additional, in the SAP Retail store, the sales price appear for the article overview option but in the store order\assortment list option the price do no appear.
2. I want to create my own structure as a copy of structure WBBP_MAX. I've copied the structure and started mapping the fields I needed. My question is - is it enough to change the structure and assign the new structure to my AL profile or do I have to modify the RWDBBI_ALV program?
Regards,
Mikio

This code works. How does your code differ in significant ways?
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.collections.ArrayCollection;
      [Bindable] private var ac:ArrayCollection = new ArrayCollection([
        {id: 1, label: "test1"},
        {id: 20, label: "test20"},
        {id: 3, label: "test3"},
        {id: 40, label: "test40"}
    ]]>
</mx:Script>
<mx:List dataProvider="{ac}">
    <mx:itemRenderer>
      <mx:Component>
        <mx:HBox>
          <mx:Label text="{data.id}"/>
          <mx:Label text="{data.label}"/>
        </mx:HBox>
      </mx:Component>
    </mx:itemRenderer>
</mx:List>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Assortment List IDoc - WBBDLD03 Taxcode Segment not creating.

Hi All,
What configurations are required to send the Tax code from Assortment List Idoc 16th Segment. Pls. let me know the steps of configuration verification so that it can be send through Assortment List IDOC WBBDLD03 or 6
Regards
Ashok

Hi Milan
Pls. follow these steps.. for Sending the Tax Codes.
NOTE : Steps for Tax Code Flow to POS
Step 1 : MM42 - Basic Data - Check the following
               Tax Class - (With Value)
               Tax Data - (Country - CA, Tax Category - CTXJ Tax Jurisdiction, Tax Classification - 1 Taxable (0-Non Taxable, 1 Taxable Etc)). Taxs Relevant to Article Taxes.
Step 1.1 : MM42 - Basic Data - Check the following
                  Check for the Assortment List Type, Listing of Assortment to Site in Listing Tab, Price of Article.
Step 2 : WB02 - Customer Tab - Billing Sales Area - Tax Classification - (1-Liable for Taxes)
Tax code is pick up from Site - Address (Country, Region Combination of Site master to Assortment List)
Step 3 : VK11 - Condition Type - CTXJ
This Tax Condition should have a Combination records for Tax Codes in the List. (For Country / State / Customer Classification / Article Classification 1. The table should contain the records for 'CA' - (Canada, Region, Tax Class Cust, Tax Class Artic, Valid from, Valid To, Tax Code)
Step 4 : IMG -> Sales and distribution -> Basic Function -> Pricing -> Pricing Control -> Define and Assign Pricing Procedure -> Maintain pricing procedures (V/08)
               V/08 - Pricing - VKP001 - Sales Price Princing Branch will carry the Pricing Condition to Outbound Idoc WBBDLD.
               Solution : Changed the VKP001 Pricing procedure having the standard tax condition MWSI, this one changed to CTXJ which is of Canadian Tax Condition.
Step 5 : IMG -> Logistics General -> Assortment -> Assortment List -> Maintain Profile for Assortment List -> Selection the Assortment Type -> Check the Condition Type Group
Step 6 : IMG -> Sales and distribution -> Pos Interface -> POS Outbound -> Maintain POS Condition Type Group
               This table is by default Maintained with below Condition types
               MWSI - Output Tax
               MWST - Output Tax
               VKAO - Promo SP IS-R
               VKPO - Sales Price
               Add Additional Condition types which need to send to POS including the condition type of Tax.of Canada
               CTXJ - Tax Jurisdiction Code.
               KA02 - Promotional Discounts % 1
               KA04 - Promotional Discount MD 1
Regards
Ashok

Assortment List IDoc : % Discount Promotion Condition Missing

Dear All,
We are working with in IS-Retail Assortment List IDoc for transferring article data to stores (SAP Triversity system). We are facing one problem while transferring the promotional discounts to the POS. We are able to transfer merchandise category level discounts using IDoc WPDREB, but when we go for transferring %discounts (Condition Type KA02) via Assortmnet List (WBBDLD.WBBDLD03) IDoc, it fails to generate the pricing condition (E1WBB07 and E1WBB08). However, we are able to populate the above mentioned segments while working with the condition types VKA0 (Special Price) and KA04 (Absolute Discount). Has anyone faced a problem like this before? Do we need to do any specific setting for %discount condition types?
Thanks in Anticipation,

Hi Somnath
sorry for the delay. As it looks like a detailed analyse is necessary.
Please open an customer message with your question on the IS-R-BD-RPC component.
Some one from SAP will take care about the issue. Ensure you have an open system and access data and an example.
I recommend to post the solution in forum after that.
regards
Björn
Edited by: Björn Panter on May 21, 2008 2:15 PM

POS assortment list - promotion price changes

Hi All,
does anyone know whether its possible to trigger change messages when a promotion price is deactivated? I tried deactivating a promotion for a specific article then executing the assortment list change message program to generate idoc but it resends the article without the promo price. I need to know the promo number that was associated with the article, is this possible?
Regards,
James
Message was edited by:
James Tran

Hi James,
The promotion articles, prices, and period are defined when the promotion is created. Depending on the type of promotion that is used, the prices for a price list or distribution chain are then activated. Depending on the activation type, the promotion price of the individual article is determined with or without the price list.
The promotion category is the same as the promotion type and is a classification characteristic in the information system. This allows promotions in the classification system to be indirectly classified according to promotion types. You must maintain precisely those promotion categories which you wish to create subsequently as promotion types. The text describing the type and category should be identical.
Bye,
Muralidhara

TSV_TNEW_PAGE_ALLOC_FAILED dump in WDBU: Assortment listing

Hi all,
when my SD consultants are executing WDBU either in background or foreground we are getting dump:
TSV_TNEW_PAGE_ALLOC_FAILED
details are as follows:
No more storage space available for extending an internal table.
Error anslysis
The internal table "???" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 1032
Number of rows: 6729552
Allocated rows: 6729552
Newly requested rows: 8 (in 1 blocks)
how to correct the error:
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2718352
Extended memory (EM)........... 5002852296
Assigned memory (HEAP)......... 2000090624
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
earlier the values for
ztta/roll_extension and abap/heap_area_total was 2 GB
for corrections i have made changes in the parameters as follows:
ES/TABLE                                    SHM_SEGS
ztta/roll_extension                         5000000000
abap/heap_area_total                        5000000000
I have AIX OS and the RAM is 16 GB on this particualr application server, which is central Instance.
the swap space allocated is 40 GB.
please tell me what to do to resolve this particular issues.
regards,
Priya

The selection criteria when you go to WBDU T-code are:
Assortment User:
sales organisation - we are specifying it
Distribution channel - we are specifying it
customer no. - site - we are just specifying one site
Assortment List:
Assortment List Type
Control Data:
Donot use cycle - we are ticking this option.
Generate Merged Versions
Parallel Processing
Max Number Of processes
Logon/ server Group - we are specifying the server the instance server.
what else can the selection criteria be narrowed down to.
Also in the dump when it says "The internal table "???" could not be further extended"what is table ??? means.
When i was going through SAP Notes i found few notes : 542669, 959104 , 740976. But these are applicable to ECC 500 and 470.mine is ECC 6.0 and our APPL level is 12.
What do you think can be done in this situation..
we are using just one site.
Regards,
Priya

SAP Retail Store - Store Order - Assortment List

G'day,
In the SAP Retail Store (SRS) when selecting the "Store Order" "Assortment List" option I've got a request to add columns to the assortment list ( I've done this via Badi IF_EX_WSAO_DISP_EXPAND ).
The challenge now is to make fields within the added columns available for user input. (Currently the fields is only displayed).
Example: I've added columns X, Y and Z in the assortment list.
There are twenty lines in the assortment list and for each line the field in column Y must except input from the user. When the Post Order button is pushed a ME22 transaction must be submitted for each item in the assortment list.
I've copied the internet service for WSTA to ZWSTA but don't have sufficient HTML knowledge to change the HTML page to achieve the above.
Can you please help with a solution.
Thanks, points will be awarded.

Hi Mohan,
Thanks for the useful link you shared.
But I am looking for specific configuration and master data set up required for store order creation scenario where " Warehouse stock is created if stock exists else third party order is created"
This option is activated in POS interface inbound profile for store order control by selecting document categorydefault as "A - Warehouse order if stock exists, otherwise third-party order"
Just wanted to understand how this option works by requiring what kind of configuration and master data settings.
Any further suggestions will be really helpful.
Regards,
Debraj

Automatic removal of articles from listing

Hello,
We have SAP Retail implemented since 2011.
Due to the Company's growth strategy we are enhancing and improving the use of Retail functionalities.
What was customized in a very simple way needs now to be adjusted to support a larger operation.
Currently there is one General assortment where all materials and sites are assigned to. The listing is created and materials connected to a module are linked to the assortment.
Some questions regarding implementation and system functionality arised with the need to review customizing and current implementation scenario:
1 - According to documentation it is possible to have automatic listing procedures. Would it be possible to unlist one material for a specific purpose? For example, if the material is not procured or sold in the past 3 months, we would like it to be automatically removed from the assortment.
2 - How to prevent CD from 'any' external procurement for a material or a group of materials?
In this case there still may be the scenario where stores have to return improper goods to CD. Stores are considered as Vendors in this case, so is our CD. I need to be able to differentiate the CD trying to procure externally from stores returning improper goods to the CD.
3 - Where can I find documentation about the tables flows and relationships during the listing , articles deactivation, assortment changes, articles removed from assortments...and so on. I would like to have the big picture about Retail tables during major materials changes.
4 - Is there a Best Practice document for using SAP Retail apart from SAP Help?
I appreciate your attention and any assistance you can provide.
Best Regards,
Claudia

Hi Uma,
I don't think there is any such program available in SAP as if user is expired then anyway system will not allow him to login and if user is valid then there is no need of performing this action separately as by logic it is same as role removal and should be handled as per standard logic.
Hope this helps.
BR,
Mangesh

Transaction wdbm assortment list manual request

Hi experts : In this transaction (WDBM) there is a function Module (ASSORT_LIST_ARTICLES_GET) , this FM does not delete duplicate records in internal table pe_t_artnr, do you know some userexit or customer function that can i use to split this error ?
thank's and best regards

Hi,
This is not question to give answer, this is requirement for inbound and outbound interfaces
Mainly you have to concentrate on interfaces is
Inbound
What are the selection screen parameter (like company code etc whether it is select option or parameter and is it required or optional) and you need to check with customer that any validation required on selection screen
You need to sit with an abaper to write BDC to update SAP data (you need to decide which fields are required in BDC recording)
You need to decide the input file format (colums, rows, Char or numc and their length)
You need to map input file fields into sap fields
Outbound
What are the selection screen parameter (like company code etc whether it is select option or parameter and is it required or optional) and you need to check with customer that any validation required on selection screen
You neeed to decide the output file format (colums, rows, Char or numc and their length) and you need to decide from which sap fields data should be pick
Where the output file shold palce
Moreover you need to sit with sr abaper to design the document Flow (FDD)
Reg
Vishnu

Unblok Article in IS retail for stores

Hey hi... Will any one help me to unblock an article in IS retail for sale in store

Hi
You can also see Note 378349 - Improvement with discontinuation & assortment list
Regards
Eduardo

Listing data from ECC to legacy system??

Hello Experts,
This is my first post and hopefully in the correct forum:
We have a requirement of sending listing data (whether articles is listed or delisted) from ECC to a legacy system. We have analyzed the option os using LIKOND01, Assortment 01or WBBDLD03. We opted for LIKOND01 since it is lighter as compared to WBBDLD03. We tried to find the documents related to both of these IDocs in help.sap etc, but could not find any information accept the header and detail records. We just wanted to know how we can trigger this LIKOND01 IDoc and whether our approach will satisfy our needs.
Any information in this regard will be appreciated.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Dec 25, 2010 1:10 PM
Edited by: rakeshjain_hit on Dec 29, 2010 1:17 PM

Hello Venu,
Thanks for your reply.
LIKOND01.
We will activate the necessary change pointers and other configurations.
What we want to know that once the change pointers are activated the LIOKOND01 IDoc will be created as soon as the listing is done in ECC and entry created in WLK1 or we have to use some t-code. Can this be done?
WBBDLD03
We also tried to create the WBBDLD IDoc after creating a listing in ECC using transaction WDBU or WDBM, but could not.
Please provide your input. I have also checked BD50 (whether it is Active) and BD52 also.
Also i tried Automatic creation of Idoc of basic type WBBDLD, however i checked the FM MASTERIDOC_CREATE_WBBDLD, and when excecuting RBDMIDOC program with the messg type WBBDLD, i am getting a ABAP DUMP.
Thanks in advance!!
Rakesh
Edited by: rakeshjain_hit on Jan 7, 2011 10:31 AM

Listing Issues in IS-Retail

Hi All,
We are facing some problem with listing of articles in IS-Retail system implementation.
The issue is ...
We have some articles which are in Development Status but we are able to do the listing for this Articles which we don't want to list.
i would appreciate if you can give some ideas how can avoid listing of the Articles which are in development status either through the config or development.
Thanks,
Venkat

Hi ,
Creating articles doesnot list in stores. The new article need to list in to assortment.Stores/sites are linked to assortment.
once the listing process completes,listing conditions will create.
if you dont want to list the article,,dont assign the article to any assortment.if already listed,,discontinue the article from assortment.
Regars,
Krish

Article assortment listing

Similar Messages

Maybe you are looking for