AS 2 for infinite slide show loop

I don't know if there is a simple answer to my question. Here goes.  I created an infinitely looping series of photos that scrolls from right to left. The animation was created with 6 photos and was animated using AS 3.
Is there substitute coding using AS 2 in place of my AS 3 coding?
Or is it more complicated and does it depend on how the photos were set up in my document, how the photos and groups of photos were converted to symbols etc??
here is my current AS 3 code that works.
var centerX:Number = stage.stageWidth / 2;
var galleryWidth:Number = infiniteGallery.width;
var speed:Number = 0;
addEventListener(Event.ENTER_FRAME, moveGallery);
function moveGallery(e:Event):void {
speed = -(0.02 * (mouseX - centerX));
infiniteGallery.x+=speed;
if (infiniteGallery.x>0) {
infiniteGallery.x= (-galleryWidth/2);
if (infiniteGallery.x<(-galleryWidth/2)) {
infiniteGallery.x=0;
I'm not a coding guru and find my AS stuff through blogs and tutorials and need to be led by the hand.
Thanks!

kglad
thanks for the info - but I did find coding that worked for pausing multiple instances on the timeline in AS3
I imported my infinite slide show loop as a movie clip at a pause on the timeline and it works great
Only issue is that the infinite slide show loop pops into the scene instead of fading into the animation
I found a snippet that fades it out great at this pause - but can't make it fade in this section of my animation
here is AS 3 coding that fades it out
any thoughts on the code or what I might do to this code that will make movie clip fade in?
Do I need to put this fade in code on a different timeline?
any info will help
infiniteGallery.addEventListener(Event.ENTER_FRAME, fadeOut);
function fadeOut(e:Event){
infiniteGallery.alpha -= 0.01;
thanks

Similar Messages

  • How do I select a song from my ITunes Library and apply to a picture folder for a slide show?

    How do I selcet a song from my ITunes library and apply it to a picture folder for a slide show. I have a PC, not a Mac.

    Short answer:
    Click Hide Song(s), it is what you wanted to do...
    Long answer:
    iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
    If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
    Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
    To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
    tt2

  • In iOS 4, you could make separate photo slide shows with separate songs.   In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.  Is there any way to fix this? This is something I

    In iOS 4, you could make separate photo slide shows with separate songs.
    In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
    Is there any way to fix this? This is something I use every day.
    I am on an iPad 2, 32gb, wifi...
    Thank you

    My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

  • What is best app for photo slide show with music

    Photoshop, Elements, or LR - for photo slide show with music

    Are those the only choices you want to consider? Which do you already use? Here's my take on the slideshow capability in each:
    Photoshop CS6 and CC: You can create slieshows in a video format but you will have to crawl through hoops and climb barrels to get what you want. The timeline feature of Photoshop is not exactly intuitive.
    Elements: Can't comment since I have never used the software.
    Lightroom: much easier than Photoshop to create a slideshow but also extremely feature limited. Slideshows can run directly from the software or rendered as a video. Only one music track is allowed with limtied transitions effects. Want the fabled 'Ken Burns' effect? Forget it!
    Neither of these choices specifically target slideshow creation and I would certainly not pick any for this purpose (unless you already use them). Best to seek software dedicated for slideshows. Several are free.

  • Transitions set for entire slide show?

    In '09, can one set transition times for an entire show or are they still set individually as in '08. Can't decide whether to use iMovie or Keynote for photo slide shows and this is a key factor due to the number of slides.
    thanks

    As in '08, in the Slide Navigator simply select all the slide thumbnails and apply a transition and set the timing -- all slides will be affected. (You can select all the slides by a) clicking on the top slide, then shift-clicking on the bottom slide, or b) click-and-drag from the bottom of the left sidebar below the last thumbnail up to the top, or c) click in the sidebar and then in the Edit menu choose "Select All".)

  • Random order for a slide show?

    How do you select a random order for a slide show?

    You rang?
    I had actually started working on this sometime in the past when this question was asked before. I never got around to finishing it but I cobbled this together this AM:
    set newList to {}
    tell application "Aperture"
      activate
              set imageSel to (the selection)
              if imageSel is {} then
                        error "Select images."
              else
                        repeat until (count of newList) = (count of imageSel)
                                  set randomPick to random number from 1 to (count of imageSel)
                                  if randomPick is not in newList then set newList's end to randomPick
                        end repeat
                        repeat with i from 1 to count of newList
                                  tell item i of imageSel to make new custom tag with properties {name:"Random", value:item i of newList}
                        end repeat
              end if
    end tell
    Takes a selection and assigns random numbers to each image in the selection,
    Creates a custom tag Random and populates it with numbers. If you add the custom field Random to the list view metadata parameters you can sort on it and then switch back to icon view and the images will remain in the random order.
    You have to be careful if you change the sort order of course the randomness will be gone and you will need to go back to list view to re-establish it.

  • I completed my album for a slide show in iPhoto; can't get the slide show to swart with picture number 1.

    I completed my album for a slide show in iPhoto; can't get the slide show to swart with picture number 1.

    Whenever I log into icloud.com
    Using what version of which browser?
    iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
    If you have, have you tried clearing your browser cache and cookies?
    For the first tine since 1989 I'm thinking about buying a PC.
    You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
    Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
    Since all this crap started, Mail won't download my Mac.com or me.com email.
    The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

  • Want to crop tunes for iPhoto slide show

    I created a play list of 3 songs for wedding slide show, would like to crop out pauses and use just short snip of one, any way to do this? I cropped as directed for iTunes, but when I chose that playlist in iPhoto, the entire songs played. Any suggestions? Entire songs won't fit the photos.
    Thanks in advance!!

    Susan
    You'll need to edit those mp3 files with an audio editor - Audacity is a open-source one - or GarageBand.
    Regards
    TD

  • Slide show loop and quality

    Hi, help! I have to put together a couple of slide show presentations for a kiosk type setting, I will have a 2 DVD players available. I will have one presentation with music and about 95 slides and the other presentation of over 100 slides with music. I don't want to leave my Mac unattended while we are in meeting but need the slide show to loop continuously while in the meetings. I know how to make a slide show in IDVD and IPHOTO, but not sure if I can make them loop or is there any other software that would be better or any advice. I need the best quality photos also. My last slideshow presentation using IDVD looked a little less then professional in photo quality. Thanks in advance and do covet the wealth of knowledge out there.

    You can set a a slideshow in an iDVD project to automatically play and loop. Go to the Map mode and drag the the slideshow into the far left (blue) bin.
    Click to view full size
    To loop selet the slideshow in the Map mode and use the Advanced menu.
    Click to view full size
    You will only be able to have one slideshow per disk play and loop so you will need to iDVD projects resulting in two burned discs.
    The slideshow with 95 slides will not present a problem but with the 100+ slideshow you can run into a pause at slide #100. That's because the DVD standard is only 99 chapters per slideshow and each slide, when created from still photos, is a chapter. iDVD gets around this limitation by renumbering the slides back to #1 when it reaches 99. At that point some DVD players will pause briefly or stop. A lot depends on the DVD player being used. Of course if you create the slideshow in iPhoto and export it to iDVD as a Quicktime movie file using the Share->Send to iDVD menu option the pause will not be a problem.
    If you plan on using your laptop or Mac to play the slideshow you won't even have to burn the iDVD project to disk. Just use the File->Save as Disk Image, mount the disk image and play it full screen with DVD Player. If you need to create a disc of the project then burn to disc with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Can you use multiple songs for a slide show in iphoto ios 2.0?

    I want to prepare a 10 minute slide show that uses more than one song.   It seems you can use a playlist using iphoto for mac (and I have seen that in other discussion threads) but what about iphoto for IOS on an ipad?   It seems to let me only use one song.   I am on IOS7 and using the lastest iphoto for ipad (v 2.0)Any suggestions out there?  Thanks

    You are welcome. Have a look at the GarageBand Help to get started.
    Basically you need to
    Create a new project - select an empty project template.
    Open the Media Browser and drag the songs from your iTunes playlist into the track area.
    Use the "Share" menu to send your new sound track to iTunes.
    This screenshot is from GarageBand 10.0, but in GarageBand '11 it would be similar.
    Just in case that you want to add some sound effects to the soundtrack, like rain or thunder, you will find the clips in the Loop Browser:
    Good luck for your slideshow

  • Work around for Custom Slide Show

    My powerpoint 2010 presentation has several custom slide show to 'repeat' the current slide when clicked. After publishing in Adobe Connect via Presenter, the button with action to show and run the custom slide show did not work. Is there a work around this? I also hid the playbar, I was required to create/add buttons on the presentation to be used as navigation controls.  One of the buttons is set up with an action to show and run the custom slide show (which basically repeats the current slide).

    Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
    "Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
    On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
    iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
    You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
    I hope this helps.
    PS, I forgot how clunky Tiger is compared to Leopard...

  • Converting m2ts videos for iPhoto slide show.

    My brother used a new camera during a recent trip we took together. He has some great videos, but they are m2ts format and I use iPhoto to produce my slide shows. (I burn the slide show using iDVD). How do I convert his videos so that I can use them? My computer is not able to open them at this point.

    One for the iMovie forum, I think.
    Regards
    TD

  • Extension for gallery/slide show

    I am looking for a versatile gallery/slide show extension that is completely independent of Flash - ie will not require Flash Player for display (curse iPad) - . Any suggestions please?

    Hello,
    Below are some links where you can be downloading these extensions is utilized in your project. Extensions are related to free allSlideshow jQuery technology is utilized, with no flash use and have used the same used in my projects.
    Links
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1695028
    http://www.flevooware.nl/dreamweaver/mxp/Behaviors/LinkedSlideShow/example.html
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1165474
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2141541
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2141543
    Any questions please contact us.
    Sincerely;
    Eufrasio Rodrigo Vieira da Silva
    [email protected]
    www.gotejar.org
    Web Developer
    Brazil - Osasco - SP

  • Keyboard shortcuts for PDF slide show?

    After creating a slide show in Photoshop elements 12, I saved it in PDF form. When I let it run, Pictures only come on full screen. I can navigate slides with keyboard  forward and back, but not stop or freeze a picture. Is there any Key or combination for "Pause" ?  Is the show controlled by Windows (Vista) or by Acrobat Reader or even by Photoshop?
    Thanks for answers,
    Platonman

    In adobe reader:
    See if left clicking and holding pauses the advance.
    Then release the mouse button to resume the slideshow.

  • Can you make an exe file for a slide show using PS Elements?

    Although I use ProShow Gold for slide shows, I need information on other programs that can provide an option for an exe format. I am not too technical so I can't tell from my Elements and couldn't find anything here. I will be running a competition in which exe files are needed so they can be played on any computer. I would appreciate any suggestions. Thanks.

    judyb429 wrote:
    I will be running a competition in which exe files are needed so they can be played on any computer. I would appreciate any suggestions.
    I hope your competition goes well. I suggest though that you thoroughly scan each submitted file for virus and malware on an isolated machine first. While not suggesting your competitors would deliberately infect their entry but if their own machines were unknowingly infected by (say) a trojan that could potentially infect the executables they create for your competition.
    If it was me I'd request files in a standard format (e.g. WMV) that is readable by just about any media playing software such as Windows Media Player.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

Maybe you are looking for

  • My iPhone 4 will NOT show up on iTunes, not even by putting it into recovery mode. Can anyone help me fix this problem? I would like to use iTunes with it.

    I got an iPhone 4 on Thursday. I connected it to my PC, a Windows Vista, that day and nothing showed up besides a "camera." My computer picked it up as a camera, which I understand is a common occurence in the iPhone. After browsing countless youtube

  • "Smart Collection" criteria shortfalls

    Hello, While Bridge CC is almost a benefit to our studio, we're finding the "smart collection" criteria entirely crippling.   It's frustrating as there really are just a couple of tiny additions that would make Bridge a life saver to us. What we're f

  • Seeburger AS2 Adapter implementation in PI 7.1

    HI Experts, We have seen lot of implemetation of seeburger adapters in PI 7.0 but didnt got any chance to look ahead for any documents related to seeburger AS2 adapter implementation in PI 7.1 . Request if you can please guide or provide some hands o

  • Topic Text disappears when upgrading to RoboHelp 7

    When upgrading a French webhelp project from RoboHelp 5 to RoboHelp 7, the topic text is deleted in context-sensitive help topics. When you click the Help button in the application, the topic appears, but is blank. When I rechecked the input, the top

  • Synchronizing in TestStand

    Hello , I have a problem with teststand with synchronizing , I must say i'm new in teststand but i have red all the manuals... In my new program i'm trying to test 30 cards . There are 3 steps : 1. Init - Should be only one time . 2. Test - which i n