ASA5510 + AnyConnect trouble
Hi,
Can't get it to work log says:Syslog ID: 716023 Group <DfltGrpPolicy> User <wmdata> IP <217.xx.xx.xx> Session could not be established: session limit of 2 reached.
And license tab says "Clientless SSL VPN Peers: 2 "
But active VPN Tunnels is 0 on all.
So where is the license gone ?
Thanks
Nordintom,
This is a bug in 8.0(2) that is fixed in 8.0(3). It will also resolve itself if you reboot the firewall.
I'll post the bugID when I find it.
Similar Messages
-
Hi,
I'm having a lot of trouble getting Anyconnect make a connection from a Win7 machine. Installation went ok, and after pushing the connect button the client tries to connect but after a while i get the following messages:
- Establishing VPN - Activating VPN adapter
- The VPN client driver has encountered an error
- Unable to establish VPN
Checked the follong things:
- is the user info correct? (ip address gateway, username and password)
- firewall settings (campus, local)
- virus scanners
- http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00809b4754.shtml solution
- Routing and Remote Access Service is disabled
- used admin privs to install and run
- different versions 2.4 and 2.5
All to no avail.
Strange however Windows XP is not a problem.
Any help much apreciated,
ErikThanks. Installed the 3.0 version but with the same result:
Anyconnect was not able to establish a connection to the specified secure gateway. Please try connecting again.
[Fri Jun 29 12:32:09 2012] Ready to connect.
[Fri Jun 29 12:32:13 2012] Contacting aaa.bbb.xxx.yyy
[Fri Jun 29 12:32:16 2012] Please enter your username and password.
[Fri Jun 29 12:32:27 2012] Establishing VPN session...
[Fri Jun 29 12:32:29 2012] Checking for profile updates...
[Fri Jun 29 12:32:29 2012] Checking for product updates...
[Fri Jun 29 12:32:30 2012] Downloading - 100%
[Fri Jun 29 12:32:30 2012] Checking for customization updates...
[Fri Jun 29 12:32:30 2012] Performing any required updates...
[Fri Jun 29 12:32:30 2012] Establishing VPN session...
[Fri Jun 29 12:32:30 2012] Establishing VPN - Initiating connection...
[Fri Jun 29 12:32:31 2012] Establishing VPN - Examining system...
[Fri Jun 29 12:32:31 2012] Establishing VPN - Activating VPN adapter...
[Fri Jun 29 12:32:31 2012] Disconnect in progress, please wait...
[Fri Jun 29 12:32:31 2012] Ready to connect.
[Fri Jun 29 12:34:10 2012] Connection attempt has failed.
[Fri Jun 29 12:34:17 2012] Ready to connect. -
ASA5510 - Accessing Anyconnect via other local Interface
Hello - I hope someone can help.
I have a scenario where there is an ASA5510 configured as follows:
Interface0 = Outside
Interface1 = LAN
Interface2 = DMZ
Interface3 = unused
Running ASA version 8.2[1]
All network operations are fine, as are the IPSEC tunnels to other branch offices, and the incoming SSL VPN accessed via the IP address assigned to the external adapter.
My problem is that I have a device on the DMZ that needs to access the AnyConnect service hosted on the external adapter so that it can access LAN resources. When I try accessing it, I see the following errors appearing in the debug log:
3
Dec 03 2012
12:10:50
710003
[DMZ client address]
51031
[AnyConnect ExternalAddress]
443
TCP access denied by ACL from [DMZ client address]/51031 to DMZ:[AnyConnect ExternalAddress]/443
If you look closely, it suggests an ACL issue from the DMZ client to the external AnyConnect IP address BUT it suggests the Anyconnect IP address is on the DMZ interface.
Has anyone seen this before?
Thanks in advance for any help.In this scenario, you will have to enable Anyconnect on the DMZ interface for letting DMZ users to establish an Anyconnect tunnel and allow access of LAN resources since from DMZ or any other LAN interface you cannot directly VPN on External interface.
For reference, check https://supportforums.cisco.com/message/3801168#3801168 as similar discussion has happened in it as well.
Regards,
Anuj -
AnyConnect Essentials lincensing on ASA5510 in HA
Hi guys,
Can someone help me with info regarding licensing.
Got 2 pairs of HA ASAs and didn't manage to find the answer - 2(per pair) or 4(for each one) licenses are needed.
The ASAs are in Active/Standby mode.
Just don't want to be in position if one of the ASAs fail the Anyconnect clients to lose functionality.
Also is reboot required after entering the licenses?
Thank you very much in advance.
Regards,
NikolayStarting with ASA v8.3 the ASAs in HA don't need the same licenses. So you only need one AnyConnect Essentials per Cluster. But if you are running v8.2 or lower, you need one license per ASA.
For the activation of AnyConnect Essentials, no reboot is required.
Sent from Cisco Technical Support iPad App -
ASA5510 Security Plus + Anyconnect Essentials = BASE?
Recently upgraded a 5510 to Anyconnect Essentials and Anyconnect Mobile, the device was Security Plus and is now Base. Is it supposed to work this way? I lost my Gigabit interfaces. Is it possible to have Security Plus + Anyconnect Essentials?
I'm sure this should be OK.
I had a similar problem with an ASA 5505 that had been upgraded to Sec Plus and subsequently Anyconnect Mobile. TAC were able to sort it out very rapidly and issue the correct license file. -
ASA5510 - VPN AnyConnect - Two Part Authentication
Currently, we have the AnyConnect client authenticating our users to our AD environment. All is working as desired. Now our Controll Agency is requiring a two step authentication for VPN access. Is it possible (and if so how do you do it) to also configure the AnyConnect client login to send a PIN to the AD usres registered Cell Phone and then require that PIN to be input to make complete the VPN login process?
This is basically the sequence that I forsee:
1. The AnyConnect client requests and then validates the User's AD credentials
2. The ASA 5510 generates and sends a one-time 4 to 6 digit PIN to the AD user's cell phone.
3. The AnyConnect client presents a dialog box awaiting the PIN to be entered.
4. The user enters the PIN and completes the login once the ASA validates the PIN.Hi,
You can use secondary authentication:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/s1.html#wp1452151
Do you have any external server/vendor for that PIN (one time password) authentication ?
How user in step 3 should know which PIN to type (if it's one-time generated) ?
With RSA one time password you could configure it as radius and use secondary authentication feature.
You could also use ACS as a proxy between ASA and RSA.
Michal -
AnyConnect 3.0 with ASA5510 no Internal Access
We have gotten our anyconnect clients to connect to the VPN with no issues and verifying credentials with RADIUS. Remote users however cannot access internal resources through the VPN. I know I need to setup an NAT Exempt statement for my VPN Pool to the Internal Network, but I am having problems figuring that out and looking for a little guidance.
Thank you in advance.
-NickYou have to create a access list.
e.g access-list NO-NAT extended permit object-group VPN-DHCP-POOL any ( feel free to restrict access here) log
Then create no NAT rule
e.g Nat (interface) 0 access-list NO-NAT
Sent from Cisco Technical Support iPad App -
Paasword Management AnyConnect- ASA5510- ACS5.3- ActiveDirectory
Hello,
I've got the above listed Szenario.
Now I've tested the PasswordManagement by configuering the User, that he must change the Password at next Logon (did this on the DomainController)
So now when I connect with AnyConnect, I enter the old PW, then I'm forced to change the PW, and next I get the Message: Access denied.
In ACS I see 3 messages:
24407 User authentication against Active Directory failed since user is required to change his password
24463 Internal error in the ACS Active Directory
24408 User authentication against Active Directory failed since user has entered the wrong password
next Time I try to connect with the new PW, i get Access, but it's not very comfortable for the Users.
Is this the usual Behaviour, or is there something wrong?
Thank You!
P.S. Domain Controller is MS Win 2003Actually, when the option of "force user to change password at next login" is selected in AD, and you do VPN authentication,this will be like password has expired and it has to be changed this time. That's why the ACS report will show "24407 User authentication against Active Directory failed since user is required to change his password".
Since we are using radius so qn the ASA, you have to enable password management for the tunnel-group the
VPN user uses to login:
ASA(config)# tunnel-group general-attributesASA(config-tunnel-general)# password-management
So basically, when you select 'change password at next login' on AD, 'enable password change' on ACS, and enable 'password-management' on ASA, and a user tries to login, the first response sent by the ACS to ASA would be 'access reject'. The ACS report would show '24407 User authentication against Active Directory failed since user is required to change his password'. Immediately after this, the VPN user would get a prompt to change his password. Finally, ACS will send an 'access accept' reply. So, for this request, 2 ACS logs would be created- one for access reject and another for access accept.
Hope this helps.
-Jatin
Do rate helpful posts- -
Trouble with Cisco Anyconnect VPN Client
Hello,
our Cisco AnyConnect VPN Client has stopped working, we are a medical office and we are attempting to connect to "clientvpn.e-mds.com" however it will not connect, the username and password we input are irrelevant it doesnt come up with a "wrong credentials" window it just erases the password and at the bottom of the window it says "Please enter your username and password". our version is 2.5.0217 does anyone know anything to try? any help would be appreciatedyou may want to try the OS X networking forums:
http://discussions.apple.com/forum.jspa?forumID=733 -
Trouble with Cisco AnyConnect VPN after getting new Airport Extreme
So I had a previous version Time Capsule that I used for years, and it started having issues where it would start spontaneously rebooting. I decided to get a new Airport Extreme (the new taller one) and went in without a hitch. Problem it, though, I work from home sometimes with my company provided Windows 7 laptop and I'm experiencing issues around the VPN hanging for 15-20 seconds then coming back, maybe 1x or 2x per hour. Especially noticeable when I'm on higher bandwidth applications like Lync meetings or Remote Desktop sessions. Never had the issue on the old Time Capsule, it was always solid (until the device itself started dying), and I don't have the issue when I'm in my office using the same VPN software. Never an issue with any of the computers in the house on the regular internet, non-VPN connection. Is there a setting I missed somewhere in my setup of the new Airport that can help to stabilize that VPN connection? Seems in newer versions, some of the options have been taken away or harder to find.
Running version 7.7.3 on the Airport Extreme.
Andy MartinHi Geo,
fnfErr
= -43, /*File not found*/
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Any change on reboot? -
ASA5510 VPN not working after upgrade from 8.2 to 8.3
Hi,
I have recently upgraded a customer ASA5510 to version 8.3.
After upgrade web access etc is working fine however VPN is down.
The config looks very different after the upgrade plus what looks to be duplicate entries.
I suspect its an access list issue but I'm not sure.
If anyone has any ideas based on the config below it would be greatly appreciated as I'm at a loss....?!
hostname ciscoasa
domain-name default.domain.invalid
enable password NvZgxFP5WhDo0hQl encrypted
passwd FNeDAwBbhVaOtVAu encrypted
names
dns-guard
interface Ethernet0/0
nameif Outside
security-level 0
ip address 217.75.8.203 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 192.168.1.254 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 10.1.1.1 255.255.255.0
management-only
boot system disk0:/asa832-k8.bin
ftp mode passive
clock timezone GMT/IST 0
clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup Inside
dns server-group DefaultDNS
domain-name default.domain.invalid
object network obj-192.168.1.2-04
host 192.168.1.2
object network obj-192.168.1.7-04
host 192.168.1.7
object network obj-192.168.1.0-02
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.2.0-02
subnet 192.168.2.0 255.255.255.0
object network obj-10.1.2.0-02
subnet 10.1.2.0 255.255.255.0
object network obj-192.168.1.224-02
subnet 192.168.1.224 255.255.255.240
object network obj-192.168.1.9-02
host 192.168.1.9
object network obj-192.168.1.2-05
host 192.168.1.2
object network obj-192.168.1.103-02
host 192.168.1.103
object network obj-192.168.1.7-05
host 192.168.1.7
object network NETWORK_OBJ_10.1.2.0_24
subnet 10.1.2.0 255.255.255.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object-group network obj-192.168.1.2-02
object-group network obj-192.168.1.7-02
object-group network obj-192.168.1.0-01
object-group network obj-192.168.2.0-01
object-group network obj-10.1.2.0-01
object-group network obj-192.168.1.224-01
object-group network obj-192.168.1.9-01
object-group network obj-192.168.1.2-03
object-group network obj-192.168.1.103-01
object-group network obj-192.168.1.7-03
object-group network obj-192.168.1.2
object-group network obj-192.168.1.7
object-group network obj-192.168.1.0
object-group network obj-192.168.2.0
object-group network obj-10.1.2.0
object-group network obj-192.168.1.224
object-group network obj-192.168.1.9
object-group network obj-192.168.1.2-01
object-group network obj-192.168.1.103
object-group network obj-192.168.1.7-01
object-group network obj_any
object-group network obj-0.0.0.0
object-group network obj_any-01
object-group service MonitcomUDP udp
port-object range 3924 3924
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip any 192.168.1.224 255.255.255.240
access-list Outside_cryptomap_60 extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_cryptomap_60 extended permit icmp 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq smtp
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq pop3
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq 2000 inactive
access-list Outside_access_in extended permit icmp any any
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in extended permit tcp any host 217.75.8.204 eq 1200
access-list Outside_access_in remark Monitcom
access-list Outside_access_in extended permit tcp host 87.232.117.66 host 217.75.8.205 eq 5900
access-list Outside_access_in extended permit udp any host 217.75.8.205 eq 3924
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 220
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 230
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 240
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 250
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 260
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 1433
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in extended permit tcp any host 217.75.8.206 eq www
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq https
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq www
access-list Outside_access_in extended permit udp any any eq 4500 inactive
access-list Outside_access_in extended permit udp any any eq isakmp inactive
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Inside_access_in extended permit ip any any
access-list Inside_access_in extended permit icmp any any
access-list RemoteVPN_splitTunnelAcl standard permit any
access-list Outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Outside_cryptomap_dyn_20 extended permit ip any 192.168.1.224 255.255.255.240
pager lines 24
logging enable
logging asdm warnings
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPNPool 192.168.1.230-192.168.1.240 mask 255.255.255.0
ip verify reverse-path interface Outside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
icmp permit any Inside
asdm location 192.168.1.208 255.255.255.252 Inside
asdm location 192.168.1.103 255.255.255.255 Inside
asdm location 192.168.1.6 255.255.255.255 Inside
asdm location 192.168.1.7 255.255.255.255 Inside
asdm location 192.168.1.9 255.255.255.255 Inside
no asdm history enable
arp timeout 14400
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-192.168.2.0-02 obj-192.168.2.0-02 unidirectional
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-10.1.2.0-02 obj-10.1.2.0-02 unidirectional
nat (Inside,any) source static any any destination static obj-192.168.1.224-02 obj-192.168.1.224-02 unidirectional
nat (Inside,Outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_10.1.2.0_24 NETWORK_OBJ_10.1.2.0_24
object network obj-192.168.1.2-04
nat (Outside,Inside) static 217.75.8.204
object network obj-192.168.1.7-04
nat (Outside,Inside) static 217.75.8.206
object network obj-192.168.1.0-02
nat (Inside,Outside) dynamic interface
object network obj-192.168.1.9-02
nat (Inside,Outside) static 217.75.8.201
object network obj-192.168.1.2-05
nat (Inside,Outside) static 217.75.8.204
object network obj-192.168.1.103-02
nat (Inside,Outside) static 217.75.8.205
object network obj-192.168.1.7-05
nat (Inside,Outside) static 217.75.8.206
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 217.75.8.198 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server DellServerAAA protocol radius
aaa-server DellServerAAA (Inside) host 192.168.1.4
key test
http server enable
http 62.17.29.2 255.255.255.255 Outside
http 82.141.224.155 255.255.255.255 Outside
http 63.218.54.8 255.255.255.252 Outside
http 213.79.44.213 255.255.255.255 Outside
http 192.168.1.0 255.255.255.0 Inside
http 10.1.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ipsec df-bit clear-df Outside
crypto ipsec df-bit clear-df Inside
crypto dynamic-map Outside_dyn_map 20 match address Outside_cryptomap_dyn_20
crypto map Outside_map 1 match address Outside_1_cryptomap
crypto map Outside_map 1 set peer 89.127.172.29
crypto map Outside_map 1 set transform-set ESP-3DES-SHA
crypto map Outside_map 60 match address Outside_cryptomap_60
crypto map Outside_map 60 set peer 89.105.114.98
crypto map Outside_map 60 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface Outside
crypto isakmp identity key-id nattingreallymatters
crypto isakmp enable Outside
crypto isakmp enable Inside
crypto isakmp policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
telnet 192.168.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 82.141.224.155 255.255.255.255 Outside
ssh 62.17.29.2 255.255.255.255 Outside
ssh 213.79.44.213 255.255.255.255 Outside
ssh 192.168.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
management-access Inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.1.31
dns-server value 192.168.1.31
default-domain value freefoam.ie
username freefoam password JLYaVf7FqRM2LH0e encrypted
username cork password qbK2Hqt1H5ttJzPD encrypted
tunnel-group 193.114.70.130 type ipsec-l2l
tunnel-group 193.114.70.130 ipsec-attributes
pre-shared-key ******
tunnel-group 89.127.172.29 type ipsec-l2l
tunnel-group 89.127.172.29 ipsec-attributes
pre-shared-key ******
tunnel-group 89.105.114.98 type ipsec-l2l
tunnel-group 89.105.114.98 ipsec-attributes
pre-shared-key *****
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool VPNPool
authentication-server-group DellServerAAA
default-group-policy RemoteVPN
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect h323 h225
inspect h323 ras
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:0dc16fe893bd4bba6fdf6b7eed93e553Hi,
Many thanks for your reply.
Finally got access to implement your suggestions.
Initially none of the VPN's were up.
After making the change the two VPN's came up.
However only data via the first VPN is possible.
Accessing resources on the 10.1.2.0 network is still not possible.
Attached is the latest config, any input is greatly appreciated;
hostname ciscoasa
domain-name default.domain.invalid
enable password NvZgxFP5WhDo0hQl encrypted
passwd FNeDAwBbhVaOtVAu encrypted
names
dns-guard
interface Ethernet0/0
nameif Outside
security-level 0
ip address 217.75.8.203 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 192.168.1.254 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 10.1.1.1 255.255.255.0
management-only
boot system disk0:/asa832-k8.bin
ftp mode passive
clock timezone GMT/IST 0
clock summer-time GMT/IDT recurring last Sun Mar 1:00 last Sun Oct 2:00
dns domain-lookup Inside
dns server-group DefaultDNS
domain-name default.domain.invalid
object network obj-192.168.1.2-04
host 192.168.1.2
object network obj-192.168.1.7-04
host 192.168.1.7
object network obj-192.168.1.0-02
subnet 192.168.1.0 255.255.255.0
object network obj-192.168.2.0-02
subnet 192.168.2.0 255.255.255.0
object network obj-10.1.2.0-02
subnet 10.1.2.0 255.255.255.0
object network obj-192.168.1.224-02
subnet 192.168.1.224 255.255.255.240
object network obj-192.168.1.9-02
host 192.168.1.9
object network obj-192.168.1.2-05
host 192.168.1.2
object network obj-192.168.1.103-02
host 192.168.1.103
object network obj-192.168.1.7-05
host 192.168.1.7
object network NETWORK_OBJ_10.1.2.0_24
subnet 10.1.2.0 255.255.255.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object-group network obj-192.168.1.2-02
object-group network obj-192.168.1.7-02
object-group network obj-192.168.1.0-01
object-group network obj-192.168.2.0-01
object-group network obj-10.1.2.0-01
object-group network obj-192.168.1.224-01
object-group network obj-192.168.1.9-01
object-group network obj-192.168.1.2-03
object-group network obj-192.168.1.103-01
object-group network obj-192.168.1.7-03
object-group network obj-192.168.1.2
object-group network obj-192.168.1.7
object-group network obj-192.168.1.0
object-group network obj-192.168.2.0
object-group network obj-10.1.2.0
object-group network obj-192.168.1.224
object-group network obj-192.168.1.9
object-group network obj-192.168.1.2-01
object-group network obj-192.168.1.103
object-group network obj-192.168.1.7-01
object-group network obj_any
object-group network obj-0.0.0.0
object-group network obj_any-01
object-group service MonitcomUDP udp
port-object range 3924 3924
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_inbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Inside_nat0_outbound extended permit ip any 192.168.1.224 255.255.255.240
access-list Outside_cryptomap_60 extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_cryptomap_60 extended permit icmp 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq smtp
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq pop3
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq 2000 inactive
access-list Outside_access_in extended permit icmp any any
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in extended permit tcp any host 217.75.8.204 eq 1200
access-list Outside_access_in remark Monitcom
access-list Outside_access_in extended permit tcp host 87.232.117.66 host 217.75.8.205 eq 5900
access-list Outside_access_in extended permit udp any host 217.75.8.205 eq 3924
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 220
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 230
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 240
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 250
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 260
access-list Outside_access_in remark ESS Access
access-list Outside_access_in extended permit tcp host 196.36.153.251 any eq 1433
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in extended permit tcp any host 217.75.8.206 eq www
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq https
access-list Outside_access_in extended permit tcp any host 217.75.8.201 eq www
access-list Outside_access_in extended permit udp any any eq 4500 inactive
access-list Outside_access_in extended permit udp any any eq isakmp inactive
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Outside_access_in remark Allow webmail access
access-list Outside_access_in remark Allow Hansa Live access
access-list Outside_access_in remark Monitcom
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark ESS Access
access-list Outside_access_in remark Allow TMS Web Access
access-list Inside_access_in extended permit ip any any
access-list Inside_access_in extended permit icmp any any
access-list RemoteVPN_splitTunnelAcl standard permit any
access-list Outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Outside_cryptomap_dyn_20 extended permit ip any 192.168.1.224 255.255.255.240
access-list global_access extended permit ip any any
access-list Outside_cryptomap_80_3 extended permit ip 192.168.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list Split-tunnel standard permit 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm warnings
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPNPool 192.168.1.230-192.168.1.240 mask 255.255.255.0
ip verify reverse-path interface Outside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
icmp permit any Inside
asdm image disk0:/asdm-647.bin
asdm location 192.168.1.208 255.255.255.252 Inside
asdm location 192.168.1.103 255.255.255.255 Inside
asdm location 192.168.1.6 255.255.255.255 Inside
asdm location 192.168.1.7 255.255.255.255 Inside
asdm location 192.168.1.9 255.255.255.255 Inside
no asdm history enable
arp timeout 14400
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-192.168.2.0-02 obj-192.168.2.0-02
nat (Inside,any) source static obj-192.168.1.0-02 obj-192.168.1.0-02 destination static obj-10.1.2.0-02 obj-10.1.2.0-02
nat (Inside,any) source static any any destination static obj-192.168.1.224-02 obj-192.168.1.224-02 unidirectional
nat (Inside,Outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_10.1.2.0_24 NETWORK_OBJ_10.1.2.0_24
object network obj-192.168.1.2-04
nat (Outside,Inside) static 217.75.8.204
object network obj-192.168.1.7-04
nat (Outside,Inside) static 217.75.8.206
object network obj-192.168.1.0-02
nat (Inside,Outside) dynamic interface
object network obj-192.168.1.9-02
nat (Inside,Outside) static 217.75.8.201
object network obj-192.168.1.2-05
nat (Inside,Outside) static 217.75.8.204
object network obj-192.168.1.103-02
nat (Inside,Outside) static 217.75.8.205
object network obj-192.168.1.7-05
nat (Inside,Outside) static 217.75.8.206
nat (Inside,Outside) after-auto source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
access-group global_access global
route Outside 0.0.0.0 0.0.0.0 217.75.8.198 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server DellServerAAA protocol radius
aaa-server DellServerAAA (Inside) host 192.168.1.4
key test
http server enable
http 62.17.29.2 255.255.255.255 Outside
http 82.141.224.155 255.255.255.255 Outside
http 63.218.54.8 255.255.255.252 Outside
http 213.79.44.213 255.255.255.255 Outside
http 192.168.1.0 255.255.255.0 Inside
http 10.1.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto ipsec df-bit clear-df Outside
crypto ipsec df-bit clear-df Inside
crypto dynamic-map Outside_dyn_map 20 match address Outside_cryptomap_dyn_20
crypto dynamic-map Outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map Outside_map 1 match address Outside_1_cryptomap
crypto map Outside_map 1 set peer 89.127.172.29
crypto map Outside_map 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-DES-SHA ESP-3DES-MD5 ESP-AES-256-MD5 ESP-3DES-SHA ESP-DES-MD5
crypto map Outside_map 60 match address Outside_cryptomap_60
crypto map Outside_map 60 set peer 89.105.114.98
crypto map Outside_map 60 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface Outside
crypto isakmp identity key-id nattingreallymatters
crypto isakmp enable Outside
crypto isakmp enable Inside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash md5
group 5
lifetime 86400
crypto isakmp policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 50
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto isakmp policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
telnet 192.168.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 82.141.224.155 255.255.255.255 Outside
ssh 62.17.29.2 255.255.255.255 Outside
ssh 213.79.44.213 255.255.255.255 Outside
ssh 192.168.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
management-access Inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable Outside
anyconnect-essentials
svc image disk0:/anyconnect-dart-win-2.5.3055-k9.pkg 1
svc image disk0:/anyconnect-macosx-powerpc-2.5.3055-k9.pkg 2
svc enable
tunnel-group-list enable
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.1.31
dns-server value 192.168.1.31
vpn-tunnel-protocol IPSec svc
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split-tunnel
default-domain value freefoam.ie
username freefoam password JLYaVf7FqRM2LH0e encrypted
username cisco password DfO7NBd5PZ1b0kZ1 encrypted privilege 15
username cork password qbK2Hqt1H5ttJzPD encrypted
tunnel-group 193.114.70.130 type ipsec-l2l
tunnel-group 193.114.70.130 ipsec-attributes
pre-shared-key ************
tunnel-group 89.127.172.29 type ipsec-l2l
tunnel-group 89.127.172.29 ipsec-attributes
pre-shared-key ************
tunnel-group 89.105.114.98 type ipsec-l2l
tunnel-group 89.105.114.98 ipsec-attributes
pre-shared-key ************
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool VPNPool
authentication-server-group DellServerAAA
default-group-policy RemoteVPN
tunnel-group RemoteVPN webvpn-attributes
group-alias Anyconnect enable
tunnel-group RemoteVPN ipsec-attributes
pre-shared-key c0nnect10nParameter$
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect h323 h225
inspect h323 ras
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:fae6b7bc25fcf39daffbcdc6b91c9d8e -
Having trouble with Dynamic-to-static
Having an issue with traffic passing over a dynamic-to-static VPN. Phase 1 and Phase 2 both complete. sh cry ips sa on the ASA shows 0 #pkts encaps. From the 861 it shows 0 #pkts decaps
I know its a lot to look at but hopefully someone will see something obvious that I messed up.
The second tunnel is working. It is coming from a CradlePoint MBR1400 so I am unable to apply the config from that.
ciscoasa# sh crypto isakmp sa
Active SA: 2
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 2
1 IKE Peer: 107.46.57.189
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
2 IKE Peer: xxx.xxx.xxx.xxx
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
ciscoasa# sh crypto ipsec sa
interface: outside
Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr:
local ident (addr/mask/prot/port): (10.10.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.101.0/255.255.255.0/0/0)
current_peer: 107.46.57.189
#pkts encaps: 3166, #pkts encrypt: 3166, #pkts digest: 3166
#pkts decaps: 2828, #pkts decrypt: 2828, #pkts verify: 2828
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 3166, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: xxx.xxx.xxx.98, remote crypto endpt.: 107.46.57.189
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: 0D67A97D
current inbound spi : B59B6F50
inbound esp sas:
spi: 0xB59B6F50 (3046862672)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 5472256, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (sec): 3020
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFF7FFFF
outbound esp sas:
spi: 0x0D67A97D (224897405)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, }
slot: 0, conn_id: 5472256, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (sec): 3020
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: xxx.xxx.xxx.98
local ident (addr/mask/prot/port): (10.10.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (10.10.10.0/255.255.255.0/0/0)
current_peer: xxx.xxx.xxx.xxx
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 1041, #pkts decrypt: 1044, #pkts verify: 1044
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: xxx.xxx.xxx.xxx/4500, remote crypto endpt.: xxx.xxx.xxx.xxx/2944
path mtu 1500, ipsec overhead 82, media mtu 1500
current outbound spi: 9613FEAC
current inbound spi : 186C9E40
inbound esp sas:
spi: 0x186C9E40 (409771584)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, NAT-T-Encaps, }
slot: 0, conn_id: 5476352, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (3914991/3199)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x9613FEAC (2517892780)
transform: esp-aes esp-sha-hmac no compression
in use settings ={L2L, Tunnel, NAT-T-Encaps, }
slot: 0, conn_id: 5476352, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (3915000/3198)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
REMOTE Config Cisco 861
Current configuration : 3112 bytes
! Last configuration change at 13:07:07 UTC Mon Jan 2 2006 by jwright
! NVRAM config last updated at 12:10:49 UTC Mon Jan 2 2006 by jwright
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service sequence-numbers
hostname Corvid
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
logging console critical
no aaa new-model
memory-size iomem 10
crypto pki trustpoint TP-self-signed-3769564853
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3769564853
revocation-check none
rsakeypair TP-self-signed-3769564853
crypto pki certificate chain TP-self-signed-3769564853
certificate self-signed 02
ip source-route
ip dhcp excluded-address 10.10.10.1
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
ip cef
no ip bootp server
no ip domain lookup
ip domain name yourdomain.com
license udi pid CISCO861-K9 sn
username xxxxx privilege 15 secret 5 $1$SI.
username xxxxx privilege 15 secret 5 $1$y1
ip tcp synwait-time 10
crypto isakmp policy 1
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key ************ address xxx.xxx.xxx.xxx
crypto ipsec transform-set RTPSET esp-aes esp-sha-hmac
crypto map RTP 1 ipsec-isakmp
set peer xxx.xxx.xxx.xxx
set transform-set RTPSET
match address 100
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
ip address dhcp
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map RTP
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source route-map nonat interface FastEthernet4 overload
ip route 0.0.0.0 0.0.0.0 dhcp
logging trap debugging
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 24 permit 192.168.0.0 0.0.0.255
access-list 100 permit ip 10.10.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 100 deny ip 10.10.10.0 0.0.0.255 any
access-list 120 deny ip 10.10.10.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 120 permit ip 10.10.10.0 0.0.0.255 any
no cdp run
route-map nonat permit 10
match ip address 120
control-plane
line con 0
logging synchronous
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
end
ASA5510
ciscoasa# sh run
: Saved
ASA Version 8.2(1)11
hostname ciscoasa
domain-name pme.local
enable password xxx encrypted
passwd xxx encrypted
names
interface Ethernet0/0
nameif backup
security-level 1
ip address xxx.xxx.xxx.xxx 255.255.255.248
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.10.1.1 255.255.0.0
interface Ethernet0/2
shutdown
nameif outside2
security-level 0
no ip address
interface Ethernet0/3
nameif outside
security-level 0
ip address xxx.xxx.xxx.xxx 255.255.255.224
interface Management0/0
nameif management
security-level 100
ip address 172.17.0.199 255.255.255.0
management-only
banner motd **************************** NOTICE ******************************
banner motd * Unauthorized access to this network device is FORBIDDEN! *
banner motd * All connection attempts and sessions are logged and AUDITED! *
banner motd ******************************************************************
banner motd **************************** NOTICE ******************************
banner motd * Unauthorized access to this network device is FORBIDDEN! *
banner motd * All connection attempts and sessions are logged and AUDITED! *
banner motd ******************************************************************
boot system disk0:/asa821-11-k8.bin
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns domain-lookup inside
dns domain-lookup outside2
dns domain-lookup outside
dns domain-lookup management
dns server-group DefaultDNS
name-server HOMESTEAD-INT
name-server SEBRING-INT
domain-name pme.local
object-group service SQLTEST udp
description SQLTEST for VES
port-object eq 1434
object-group service SQLTEST_TCP tcp
description SQLTEST For VES
port-object eq 1433
object-group service DM_INLINE_TCP_1 tcp
port-object eq ftp
port-object eq ftp-data
access-list nonat extended permit ip any 10.10.11.0 255.255.255.0
access-list nonat extended permit ip 10.10.0.0 255.255.0.0 10.10.11.0 255.255.255.0
access-list nonat extended permit ip 10.10.0.0 255.255.0.0 192.168.101.0 255.255.255.0
access-list nonat extended permit ip 10.10.0.0 255.255.0.0 10.10.10.0 255.255.255.248
access-list outside_access_in extended permit tcp any host DAYTONA-EXT-BAK eq smtp
access-list outside_access_in extended permit tcp any host DAYTONA-EXT-BAK eq https
access-list outside_access_in extended permit tcp any host DAYTONA-EXT-BAK eq www
access-list outside_access_in extended permit tcp any host SonomaBullsEye eq https inactive
access-list outside_access_in extended permit tcp any host AUTHENTICA-EXT-BAK eq www
access-list outside_access_in extended permit tcp any host AUTHENTICA-EXT-BAK eq https
access-list outside_access_in extended permit udp any host xxx.xxx.xxx.xxx eq 1434
access-list outside_access_in extended permit tcp any host xxx.xxx.xxx.xxx eq 1433 inactive
access-list outside_access_in extended permit tcp any host FILETRANSFER-EXT-BAK eq www
access-list outside_access_in extended permit tcp any host FILETRANSFER-EXT-BAK eq https
access-list outside_access_in remark HTTP for TeamWeb
access-list outside_access_in extended permit tcp any host ALEXSYS-EXT-BAK eq www
access-list outside_access_in remark HTTPS for TeamWeb
access-list outside_access_in extended permit tcp any host ALEXSYS-EXT-BAK eq https
access-list outside_access_in extended deny icmp any any
access-list Split_Tunnel_List standard permit 10.10.0.0 255.255.0.0
access-list outside_access_in_1 extended permit tcp any host DAYTONA-EXT-OUT eq smtp
access-list outside_access_in_1 extended permit tcp any host DAYTONA-EXT-OUT eq https
access-list outside_access_in_1 extended permit tcp any host DAYTONA-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host Sonoma eq https inactive
access-list outside_access_in_1 extended permit tcp any host PMEUPDATE-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host FILETRANSFER-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host FILETRANSFER-EXT-OUT eq ssh inactive
access-list outside_access_in_1 extended permit tcp any host FILETRANSFER-EXT-OUT eq https
access-list outside_access_in_1 remark FTPS
access-list outside_access_in_1 extended permit tcp any host FTP-EXT-OUT object-group DM_INLINE_TCP_1
access-list outside_access_in_1 extended permit tcp any host FTP-EXT-OUT range 60200 60400
access-list outside_access_in_1 extended permit tcp any host AUTHENTICA-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host AUTHENTICA-EXT-OUT eq https
access-list outside_access_in_1 extended permit tcp any host OSCODA-EXT-OUT object-group SQLTEST_TCP inactive
access-list outside_access_in_1 extended permit udp any host OSCODA-EXT-OUT object-group SQLTEST inactive
access-list outside_access_in_1 extended permit tcp any host ALEXSYS123-EXT-OUT eq www
access-list outside_access_in_1 extended permit tcp any host ALEXSYS123-EXT-OUT eq https
access-list outside_access_in_1 extended deny icmp any any
access-list inside_access_out extended permit ip any any log
pager lines 24
logging enable
logging timestamp
logging trap notifications
logging asdm notifications
logging from-address [email protected]
logging recipient-address [email protected] level errors
logging host inside 10.10.2.12
logging permit-hostdown
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302012
no logging message 302017
no logging message 302016
mtu backup 1500
mtu inside 1500
mtu outside2 1500
mtu outside 1500
mtu management 1500
ip local pool IPSECVPN2 10.10.11.76-10.10.11.100
ip local pool SSLVPN 10.10.11.101-10.10.11.200 mask 255.255.0.0
ip local pool IPSECVPN 10.10.11.25-10.10.11.75
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-623.bin
no asdm history enable
arp timeout 14400
global (backup) 1 xxx.xxx.xxx.xxx
global (outside) 1 xxx.xxx.xxx.xxx netmask 255.255.255.224
nat (inside) 0 access-list nonat
nat (inside) 1 10.10.0.0 255.255.0.0
static (inside,outside) DAYTONA-EXT-OUT DAYTONA-INT netmask 255.255.255.255
static (inside,outside) AUTHENTICA-EXT-OUT AUTHENTICA-INT netmask 255.255.255.255
static (inside,outside) ALEXSYS123-EXT-OUT MIDOHIO-INT netmask 255.255.255.255
static (inside,outside) PMEUPDATE-EXT-OUT PMEUPDATE-INT netmask 255.255.255.255
static (inside,outside) FILETRANSFER-EXT-OUT FILETRANSFER-INT netmask 255.255.255.255
static (inside,outside) FTP-EXT-OUT FTP-INT netmask 255.255.255.255
static (inside,backup) FILETRANSFER-EXT-BAK FILETRANSFER-INT netmask 255.255.255.255
static (inside,backup) DAYTONA-EXT-BAK DAYTONA-INT netmask 255.255.255.255
static (inside,backup) AUTHENTICA-EXT-BAK AUTHENTICA-INT netmask 255.255.255.255
static (inside,backup) ALEXSYS-EXT-BAK MIDOHIO-INT netmask 255.255.255.255
access-group outside_access_in in interface backup
access-group inside_access_out in interface inside
access-group outside_access_in_1 in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1 track 1
route backup 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 254
route backup 62.109.192.0 255.255.240.0 xxx.xxx.xxx.xxx 1
route backup 64.68.96.0 255.255.224.0 xxx.xxx.xxx.xxx 1
route backup 66.114.160.0 255.255.240.0 xxx.xxx.xxx.xxx 1
route backup 66.163.32.0 255.255.240.0 xxx.xxx.xxx.xxx 1
route backup 209.197.192.0 255.255.224.0 xxx.xxx.xxx.xxx 1
route backup 210.4.192.0 255.255.240.0 xxx.xxx.xxx.xxx 1
timeout xlate 3:00:00
timeout conn 24:00:00 half-closed 0:05:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
webvpn
http-proxy enable
aaa-server PMERADIUS protocol radius
aaa-server PMERADIUS (inside) host HOMESTEAD-INT
key ******
radius-common-pw ******
aaa authentication ssh console LOCAL
http server enable
http 10.10.0.0 255.255.0.0 inside
http 172.17.0.0 255.255.255.0 management
http redirect backup 80
http redirect outside 80
snmp-server location Server Room
snmp-server contact Jay
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 100
type echo protocol ipIcmpEcho xxx.xxx.xxx.xxx interface outside
timeout 3000
frequency 10
sla monitor schedule 100 life forever start-time now
crypto ipsec transform-set PM1 esp-3des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set pfs group1
crypto dynamic-map dyn1 1 set transform-set PM1
crypto dynamic-map dyn1 1 set security-association lifetime seconds 28800
crypto dynamic-map dyn1 1 set security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set reverse-route
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map cryptomap1 1 ipsec-isakmp dynamic dyn1
crypto map cryptomap1 interface backup
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint xxx.xxx.xxx.xxx
enrollment terminal
fqdn xxx.xxx.xxx.xxx
subject-name CN= xxx.xxx.xxx.xxx, O=xxxx, C=US, St=MI, L=xxxx
keypair xxx.xxx.xxx.xxx
crl configure
crypto ca certificate chain xxx.xxx.xxx.xxx
certificate 041200616c79f4
30820577 3082045f a0030201 02020704 1200616c 79f4300d 06092a86 4886f70d
quit
crypto isakmp identity address
crypto isakmp enable backup
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp policy 50
authentication pre-share
encryption aes-256
hash md5
group 5
lifetime 86400
crypto isakmp nat-traversal 33
track 1 rtr 100 reachability
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 15
ssh version 2
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 64.22.86.210 source backup prefer
ssl trust-point vpn.prattmiller.com outside
ssl trust-point vpn.prattmiller.com backup
ssl trust-point vpn.prattmiller.com outside2
webvpn
enable backup
enable outside2
enable outside
svc image disk0:/anyconnect-win-2.5.3055-k9.pkg 2
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 3
svc profiles AllowRemoteUsers disk0:/AnyConnectProfile.xml
svc enable
internal-password enable
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 10.10.2.1
vpn-tunnel-protocol IPSec l2tp-ipsec
default-domain none
group-policy DfltGrpPolicy attributes
dns-server value 10.10.2.1 10.10.2.62
vpn-idle-timeout 600
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_List
default-domain value pme.local
webvpn
url-list value Book1
svc profiles value AllowRemoteUsers
svc ask enable default webvpn timeout 10
group-policy AnyConnect internal
group-policy AnyConnect attributes
vpn-tunnel-protocol webvpn
webvpn
svc ask enable default webvpn timeout 15
username xxxx password RrjDgdg5BBLrGPnn encrypted privilege 15
username xxxx password qDxllXruMJHEVZji encrypted privilege 15
username xxxx password dGOqWbOOjP0FVxtl encrypted privilege 15
tunnel-group DefaultL2LGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup general-attributes
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool (backup) IPSECVPN2
address-pool (outside2) IPSECVPN2
address-pool (outside) SSLVPN
address-pool SSLVPN
authentication-server-group PMERADIUS
tunnel-group pm_ipsec type remote-access
tunnel-group pm_ipsec general-attributes
address-pool IPSECVPN2
tunnel-group pm_ipsec ipsec-attributes
pre-shared-key *
tunnel-group prattmiller type remote-access
tunnel-group prattmiller general-attributes
address-pool IPSECVPN
tunnel-group prattmiller ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 1024
policy-map global_policy
class inspection_default
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect pptp
class class-default
service-policy global_policy global
smtp-server 10.10.2.6
prompt hostname context
Cryptochecksum:8316029502f6698d4015f5e1b3d40a08
: end
[code] TEST [/code]My question about this is the other Dynamic VPN that is working has no static route.
I added:
route outside 10.10.10.0 255.255.255.248 xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP of the non working remote IKE Peer)
This had no effect.
Looking at the two tunnels. The working tunnel is using IKE IPSEC and the nonworking tunnel is using IKE IPsecOverNatT. What have I entered that tells the VPN to use IPsecOverNatT? -
Setting up IPsec VPNs to use with Cisco Anyconnect
So I've been having trouble setting up vpns on our ASA 5510. I would like to use IPsec VPNs so that we don't have to worry about licensing issues, but from what I've read you can do this with and still use Cisco Anyconnect. My knowledge on how to set up VPNs especially in iOS verion 8.4 is limited so I've been using a combination of command line and ASDM.
I'm finally able to connect from a remote location but once I connect, nothing else works. From what I've read, you can use IPsec for client-to-lan connections. I've been using a preshared key for this. Documentation is limited on what should happen after you connect? Shouldn't I be able to access computers that are local to the vpn connection? I'm trying to set this up from work. If I VPN from home, shouldn't I be able to access all resources at work? I think because I've used the command line as well as ASDM I've confused some of the configuration. Plus I think some of the default policies are confusing me too. So I probably need a lot of help. Below is my current configuration with IP address altered and stuff that is completely non-related to vpns removed.
NOTE: We are still testing this ASA and it isn't in production.
Any help you can give me is much appreciated.
ASA Version 8.4(2)
hostname ASA
domain-name domain.com
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Ethernet0/1
nameif outside
security-level 0
ip address 50.1.1.225 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
no nameif
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa842-k8.bin
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
same-security-traffic permit intra-interface
object network NETWORK_OBJ_192.168.0.224_27
subnet 192.168.0.224 255.255.255.224
object-group service VPN
service-object esp
service-object tcp destination eq ssh
service-object tcp destination eq https
service-object udp destination eq 443
service-object udp destination eq isakmp
access-list ips extended permit ip any any
ip local pool VPNPool 192.168.0.225-192.168.0.250 mask 255.255.255.0
no failover
failover timeout -1
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 no-proxy-arp route-lookup
object network LAN
nat (inside,outside) dynamic interface
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 50.1.1.250 1
sysopt noproxyarp inside
sysopt noproxyarp outside
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=ASA
crl configure
crypto ca server
shutdown
crypto ca certificate chain ASDM_TrustPoint0
certificate d2c18c4e
308201f3 3082015c a0030201 020204d2 c18c4e30 0d06092a 864886f7 0d010105
0500303e 3110300e 06035504 03130741 53413535 3130312a 30280609 2a864886
f70d0109 02161b41 53413535 31302e64 69676974 616c6578 7472656d 65732e63
6f6d301e 170d3131 31303036 31393133 31365a17 0d323131 30303331 39313331
365a303e 3110300e 06035504 03130741 53413535 3130312a 30280609 2a864886
f70d0109 02161b41 53413535 31302e64 69676974 616c6578 7472656d 65732e63
6f6d3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100b2
8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b
37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c
234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c51782
3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02
03010001 300d0609 2a864886 f70d0101 05050003 8181009d d2d4228d 381112a1
cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc
18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6
beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef
af72e31f a1c4a892 d0acc618 888b53d1 9b888669 70e398
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside client-services port 443
crypto ikev2 remote-access trustpoint ASDM_TrustPoint0
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 10
console timeout 0
management-access inside
ssl trust-point ASDM_TrustPoint0 outside
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
anyconnect profiles VPN disk0:/devpn.xml
anyconnect enable
tunnel-group-list enable
group-policy VPN internal
group-policy VPN attributes
wins-server value 50.1.1.17 50.1.1.18
dns-server value 50.1.1.17 50.1.1.18
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client
default-domain value digitalextremes.com
webvpn
anyconnect profiles value VPN type user
always-on-vpn profile-setting
username administrator password xxxxxxxxx encrypted privilege 15
username VPN1 password xxxxxxxxx encrypted
tunnel-group VPN type remote-access
tunnel-group VPN general-attributes
address-pool (inside) VPNPool
address-pool VPNPool
authorization-server-group LOCAL
default-group-policy VPN
tunnel-group VPN webvpn-attributes
group-alias VPN enable
tunnel-group VPN ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
class-map ips
match access-list ips
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect http
class ips
ips inline fail-open
class class-default
user-statistics accountingHi Marvin, thanks for the quick reply.
It appears that we don't have Anyconnect Essentials.
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5510 Security Plus license.
So then what does this mean for us VPN-wise? Is there any way we can set up multiple VPNs with this license? -
AnyConnect SSL VPN Vista split-tunneling
I recently setup an ASA5510 with 8.0fw with the AnyConnect SSL VPN Client.
Connecting to the SSL VPN works perfectly from all the XP computers that I have tested from. No problems there. However when on Vista, split-tunneling does not seem to function properly. Everything connects and works fine, and I can get to the defined secured remote nets, however I can't access anything out my default gateway(un-secured traffic). It seems like it might be a problem with Vista security features. When I try to ping out to any outside host, I get:
PING: transmit failed, error code 1231.
I can actually ping my default gateway, but nothing gets routed past it without the above error. I've also confirmed this several Vista installations, with Administrator + UAC disabled. Anyone else?I have done the same testing, and on both Vista 32bit and 64Bit the split tunneling does not seem to work. Also I found that this is a "known" bug
From the Release Notes::
AnyConnect Split-tunneling Does Not Work on Windows Vista - AnyConnect split-tunneling works correctly with Windows XP and Windows 2000 (CSCsi82315)
I am happy that 64Bit works but will hold off on roll out until split-tunneling is fixed.
Cassidy -
AnyConnect client reconnects after 1 minute
AnyConnect client reconnects after 1 minute; WHY
version 3.1.02026
ASA:asa911-k8.bin
[25-4-2013 8:16:11] Establishing VPN session...
[25-4-2013 8:16:11] Checking for profile updates...
[25-4-2013 8:16:11] Checking for product updates...
[25-4-2013 8:16:11] Checking for customization updates...
[25-4-2013 8:16:11] Performing any required updates...
[25-4-2013 8:16:12] Establishing VPN session...
[25-4-2013 8:16:12] Establishing VPN - Initiating connection...
[25-4-2013 8:16:12] Establishing VPN - Examining system...
[25-4-2013 8:16:12] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:16:15] Establishing VPN - Configuring system...
[25-4-2013 8:16:16] Establishing VPN...
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:17:19] Reconnecting to my.vpn.com...
[25-4-2013 8:17:19] Establishing VPN - Examining system...
[25-4-2013 8:17:24] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:17:25] Reconnecting to my.vpn.com...
[25-4-2013 8:17:25] Establishing VPN - Examining system...
[25-4-2013 8:17:25] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:16:11] Establishing VPN session...
[25-4-2013 8:16:11] Checking for profile updates...
[25-4-2013 8:16:11] Checking for product updates...
[25-4-2013 8:16:11] Checking for customization updates...
[25-4-2013 8:16:11] Performing any required updates...
[25-4-2013 8:16:12] Establishing VPN session...
[25-4-2013 8:16:12] Establishing VPN - Initiating connection...
[25-4-2013 8:16:12] Establishing VPN - Examining system...
[25-4-2013 8:16:12] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:16:15] Establishing VPN - Configuring system...
[25-4-2013 8:16:16] Establishing VPN...
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:16:16] Connected to my.vpn.com.
[25-4-2013 8:17:19] Reconnecting to my.vpn.com...
[25-4-2013 8:17:19] Establishing VPN - Examining system...
[25-4-2013 8:17:24] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.
[25-4-2013 8:17:25] Reconnecting to my.vpn.com...
[25-4-2013 8:17:25] Establishing VPN - Examining system...
[25-4-2013 8:17:25] Establishing VPN - Activating VPN adapter...
[25-4-2013 8:17:25] Establishing VPN - Configuring system...
[25-4-2013 8:17:25] Establishing VPN...
[25-4-2013 8:17:25] Connected to my.vpn.com.Hello Michael,
The problem here is because we cannot succesfully establish a DTLS tunnel. This could happen because:
- DTLS is blocked somewhere in the path
- A non-default DTLS port is being used
If DTLS is blocked in the middle the issue is because as of ASA Release 9.x and AnyConnect Release 3.x, an optimization has been introduced in the form of distinct Maximum Transition Units (MTUs) that are negotiated for TLS/DTLS between the client/ASA. Previously, the client derived a rough estimate MTU which covered both TLS/DTLS and was obviously less than optimal. Now, the ASA computes the encapsulation overhead for both TLS/DTLS and derives the MTU values accordingly.
As long as DTLS is enabled, the client applies the DTLS MTU (in this case 1418) on the VPN adapter (which is enabled before the DTLS tunnel is established and is needed for routes/filters enforcement), to ensure optimum performance. If the DTLS tunnel cannot be established or it is dropped at some point, the client fails over to TLS and adjusts the MTU on the virtual adapter (VA) to the TLS MTU value (this requires a session level reconnect).
In order to eliminate this visible transition of DTLS > TLS, you can configure a separate tunnel group for TLS only access for users that have trouble with the establishment of the DTLS tunnel (such as due to firewall restrictions).
1. The best option is to set the AnyConnect MTU value to be lower than the TLS MTU, which is then negotiated.
group-policy ac_users_group attributes
webvpn
anyconnect mtu 1300
This makes TLS and DTLS MTU values equal. Reconnections are not seen in this case.
2. The second option is to allow fragmentation.
group-policy ac_users_group attributes
webvpn
anyconnect ssl df-bit-ignore enable
With fragmentation, large packets (whose size exceeds the MTU value) can be fragmented and sent through the TLS tunnel.
3. The third option is to set the Maximum Segment Size (MSS) to 1460 as follows:
sysopt conn tcpmss 1460
In this case, the TLS MTU will be 1427 (RC4/SHA1) which is larger than the DTLS MTU 1418 (AES/SHA1/LZS). This should resolve the issue with TCP from the ASA to the AnyConnect client (thanks to MSS), but large UDP traffic from the ASA to the AnyConnect client might suffer from this as it will be dropped by the AnyConnect client due to the lower AnyConnect client MTU 1418. If sysopt conn tcpmss is modified, it might affect other features such as LAN-to-LAN (L2L) IPSec VPN tunnels.
If DTLS is not blocked in the middle another potential cause for the DTLS failure that DTLS is configured on a non-default port after the WebVPN is enabled (for example, when the webvpn enable outside command is entered). This is due to Cisco bug ID CSCuh61321 and has been seen in Release 9.x where the ASA pushes the non-default port to the client, but continues to listen to the default port. Consequently, the DTLS is not built and AnyConnect reconnects.
The workaround for this problem is:
Disable the WebVPN.
Enter the DTLS port.
Enable the WebVPN.
Regards,
-Gustavo Medina
Maybe you are looking for
-
HT204053 Can my children and I use the same apple ID with different iPhone iPad and iPod ?
I am having trouble with my new iPhone 5 address book and some updates on the apps store There's some old apple ID that is showing up. I don't even remember this email address What can I do to adjust all this Thanks
-
Random restarts with Eclipse SLI board
This is a copy from my post on the Vista forums havent gotten much help there. Describe the problem in detail! I just built a new system on December 22nd 2008. I do Tier 2 and 3 Helpdesk work so I can work my way around a system. I put the machine to
-
How do I use this StringManip method?
I want to be able to use the following method: java.lang.Object | --SSF.OS.BGP4.Util.StringManip public class StringManip extends java.lang.Object This class contains public utility methods useful for manipulating character strings. static java.lang.
-
Hi, its longtime i want setting my fan control. if you want me help i block to the starting of fancontrol he start and dont finish. here is my config : sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0°C (high = +78.0°C, crit = +100
-
I have tried MI 2.5 on Windows Mobile 6.0. Sometimes it does not work properly by throwing a DNS error. I think the way we are using the advanced networking functionality in the OS is causing a problem. I would like to mention that as of Windows Mobi