Asking for the standard report or function module or class for determining no of employees under a client

Hi,
Advance thanks for ur reply......
Is there any module function or class or standard report which gives the no of employees under a specific client based on country group and also gives percentage of employees belong to the client?
Regards,
selwin.

Hi,
According to your requirement, you can prepare report through S_PH0_48000513 - Ad Hoc Query , you can get percentage from IT0007 in Ad Hoc query. first decide how many fields you want and then choose in selection criteria and generate the report.
Thanks,
Nirali P.

Similar Messages

I have a requirement for the Standard report like QA33

Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMAL

When changing or deleting one or more lines of the internal table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS"
     where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
     area from or inserting a line area into the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
     area from or inserting a line area into the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
At the time of the termination, the table contained 2 lines.
This is the error
I went to se80 and copied the whole program - > but getting this error

Creating the bussiness roles for the bussiness partner using Function modul

Hi
How to create the business roles using the function modules for the Business partner.

You can also assign the role at the time of creation of the business partner itself. Use the function module BAPI_BUPA_FS_CREATE_FROM_DATA to achieve the same.
If your business partner is already there then you can use the function module BAPI_BUPA_ROLE_ADD.
Reward points if it helps.

Calling a report from function module

Hi Friends,
I have requirement for Function Module i.e. we will add the button to the standard T-code and ( Function added in config ) then
Function to be called from Customizing
Program A called from customizing function
CalculationPDFFunction is called from program A.
So can any one help me the logic for "calling a report from function module ".
Thanks in Advance.
Regards,
OSReddy.
Edited by: OSReddy on Sep 23, 2011 7:31 AM

Hi Jaya,
Yes. It is possible to call ur custom program using SUBMIT statement.
1. If u have data to pass then build table type RSPARAMS and use below statement.
data:
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
SUBMIT report1 WITH SELECTION-TABLE rspar_tab
               AND RETURN.
1. If u want to create variant to the program and use that. use the below statement .
SUBMIT report1 USING SELECTION-SET 'VAR1' "variant
               AND RETURN.
Regards,
Venkat.O

Who modified the standard report

Hi,
How can i find out who modified the standard report in my server,guide me for the same.
Thanku

SE38 -> Enter report -> Mark Attributes -> Display -> Last changed by.
Regards
Juan

Where the documentation is provided for the Standard Function module ?

If there is no documentation provided for the standard function module in SE37 what is the best way to understand the functionality of the function module?Is there any where we can find the documentation?
Please dont say the From coding part its too vast to understand
Ex: HRCM_ORGSTRC_INFO_TABLE_GET
Paint for me ..
Regards
sas
Edited by: Julius Bussche on Mar 18, 2009 1:17 PM

O Really thanks amit !!
Are you able to understand the below code and please provide your valuable inputs what we are understanding is the same.
PERFORM read_infotypes.
*-- ********************************************************** NMP
*-- IF scb frozen then write to itab-scb field. nmp 11/2001.
*-- ********************************************************** NMP
*--Begin of Change by vneld - 01/17/2007
* IF PA0001-ZZBERN NE SPACE.
* FROZEN = PA0001-ZZBERN.
* ENDIF.
* ITAB-SCB = FROZEN.
*-- ********************************************************** NMP
*--end of Change by vneld- 01/17/2007
PERFORM get_date USING '92'
 CHANGING w_hiredate.
PERFORM get_date USING '93'
 CHANGING w_rehire.
PERFORM get_date USING '94'
 CHANGING w_termdate.
IF NOT ( w_rehire IS INITIAL ).
 w_hiredate = w_rehire.
 itab-code = 'R'.
ELSE.
 itab-code = 'H'.
ENDIF.
IF p0001-persg = '3'.
 itab-code = 'T'.
ENDIF.
*Change by Mdukes
** We need HIRE,Rehire & term within 13 month`s window
** But if someone Hire in IT ,change dept and then terminated .
** We need to exclude that person from the list .
** We need to change his Org.Unit by END_DATE 12/31/9999 from Pa0001.
CLEAR:result_tab.REFRESH:result_tab.
CALL FUNCTION 'HRCM_ORGSTRC_INFO_TABLE_GET'
 EXPORTING
 PLVAR = '01'
 ROOT_OTYPE = 'O'
 ROOT_OBJID = P0001-ORGEH
 BEGDA = SY-DATUM
 ENDDA = P0001-ENDDA
 PATH_ID = EVPATH
 PATH_DEPTH = 10
 TABLES
 ORG_INFO_TABLE = result_tab
 EXCEPTIONS
 PATH_ERROR = 1
 ROOT_ERROR = 2
 OTHERS = 3.
* CALL FUNCTION 'RH_STRUC_GET'
* EXPORTING = 'O'
* act_objid = PA0001-ORGEH
* act_wegid = EVPATH
* act_plvar = TYPE
* act_tflag = space
* act_vflag = space
* authority_check = space
* TABLES
* result_tab = result_tab
* EXCEPTIONS
* no_plvar_found = 1
* no_entry_found = 2
* OTHERS = 3.
* reading the Org.Unit based on employee Org.unit (Evaluation Path 'O-O'.
* After that making sure the latest Pa0001 org.unit is part of selection org.unit
* If yes, set the flag to = 1 . Otherwise ignore the rec .
* We want only IT folks hire/rehire/term within 13 monthu2019s window
* if somebody change the dept and get term within 13 monthu2019s .it
* Should show up in hire but not in term report .
CLEAR:REC.
lOOP AT result_tab.
 read table PCHOBJID with key low = result_tab-OBJID.
 if sy-subrc = 0 .
 Rec = 1.
 EXIT.
 Endif.
ENDLOOP.
if rec = 1.
*--begin of change by vneld- 01/17/07
 CHECK ( ( w_hiredate >= w_13th_mnth_date AND w_hiredate <= sy-datum )
 OR
 ( w_termdate >= w_13th_mnth_date AND w_termdate <= sy-datum ) ).
*--end of change by vneld- 01/17/07
**---check for hires or terms in the calendar year.
**---No future terms
* CHECK ( ( W_HIREDATE(4) = SY-DATUM(4) ) OR
* ( W_TERMDATE(4) = SY-DATUM(4) AND W_TERMDATE <= SY-DATUM ) ).
 CONCATENATE p0002-vorna p0002-nachn INTO itab-name SEPARATED BY ' '.
*--Begin of change by vneld 03/29/2007
*--get supervisor name
 data : lname(20),
 fname(20).
 clear: lname,
 fname.
 Select vorna nachn from pa0002 into (fname ,lname)
 where pernr = p0001-zzsuper_no.
 endselect.
 CONCATENATE lname fname INTO itab-supv SEPARATED BY ' '.
* itab-supv = p0001-zzsuper_text.
*--End of change by vneld 03/29/2007
*----get employee group text
 CLEAR t501t.
 SELECT SINGLE * FROM t501t WHERE sprsl = 'EN' AND
 persg = p0001-persg.
 IF sy-subrc EQ 0.
 itab-group = t501t-ptext.
 ENDIF.
 PERFORM get_dept.
 PERFORM get_position.
 PERFORM append_fields.
endif.
ENDFORM. " PROCESS_EMPLOYEE
Edited by: saslove sap on Mar 19, 2009 7:45 AM

How to find out the Area Menu for a Report/ Table/Function Module

Hi,
Is there any procedure to find out the "AREA MEANU" for a Report/Table/Function Module...
Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
Thank you for your quick response...
Regards,
Thiru


Hi,
Check these below threads:
user log in & log out time SAO
How to find user log-out time ?
Regards,
Nitin

For Delivery Performance what are the standard report available n SAP?

For Delivery Performance what are the standard report available n SAP?

hi
If you wanna know the SD report just go to SAP1 transaction code from easy access( it works only from easy access) and you will find entire reports available in SAP. Then select what is relevant to you. And as you asked any material on reports, so I have some good material on it and will surely send you tonight.
And Some of the Standard reports in SD are given below check it out for convenient however always better to chek above told transaction code:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
These are all main standard reports as well I am again repeating that it's better to check all reports from above said transaction code.

Which Function Module is used for converting the DATE in BDC

HI,
Which Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

data : date like sy-datum.
data : odate(10) type c.
date = sy-datum.        " in format YYYYMMDD
CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
EXPORTING
   input         = date
IMPORTING
   OUTPUT        = odate         .
write:/ odate. "in ur format '.
1.
In ur itab make a field for date as 10 characters and use this Fm to store the date .
2. Pass the date as the charcter field to the screen and now check .

Identify tables from where the function module extracts data for the ES

Hi All,
For the datasource, 0CRM_SALES_ORDER_I in the CRM system, we need to add a new field (in the table level). This datasource's extraction type is 'F1 - function module'. Is the extractor itself is this function module? If it is a sepeate FM, where can we find the function module name used for this datasource?
We need to identify the tables from where the fields in this datasource fetch data from. Where can we find this information?
To be specific, in the sales order in tcode crmd_order, if we goto conditions tab and create a new condition, in what table this will get stored?
Thank you in advance,
Hari

Ignore this thread! there is another thread I have created for the same problem.
I created only one; wonder how it became two!!

Example of a Simple ALV Report using Function Modules (not OO)

Hi,
I am new to ABAP. Where can I get a proper Example of a Simple ALV Report using Function Modules? I searched the forum but did not find a proper solution. Kindly help.
Smruthi.
Edited by: Smruthi Acharya on Jan 29, 2009 7:13 PM

Hi,
Use this demo code:-
REPORT z_alv01 MESSAGE-ID zmsg.
* TABLES
TABLES : ekpo.
* TYPE POOLS
TYPE-POOLS : slis.
* TYPE DECLARATION
TYPES : BEGIN OF t_ekpo,
 ebeln TYPE ekpo-ebeln,
 ebelp TYPE ekpo-ebelp,
 matnr TYPE ekpo-matnr,
 werks TYPE ekpo-werks,
 menge TYPE ekpo-menge,
 END OF t_ekpo.
* PARAMETERS
PARAMETERS : s_var TYPE disvariant-variant.
* DATA DECLARATION
*VARIABLES
DATA : check(1),
 rep_id TYPE sy-repid.
*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.
*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
 wa_field TYPE slis_fieldcat_alv.
*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
 wa_sort TYPE slis_sortinfo_alv.
*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
 wa_top TYPE slis_listheader.
*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
 wa_end TYPE slis_listheader.
*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
 wa_event TYPE slis_alv_event.
*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.
*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.
*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
 wa_exclude TYPE slis_extab.
*FOR VARIANT
DATA : wa_variant TYPE disvariant.
* INITIALIZATION
INITIALIZATION.
check = 'X'.
rep_id = sy-repid.
wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
 EXPORTING
 i_save = 'A'
 CHANGING
 cs_variant = wa_variant
 EXCEPTIONS
 wrong_input = 1
 not_found = 2
 program_error = 3
 OTHERS = 4.
IF sy-subrc = 0. " IF DEFAULT VARIANT FOUND
 s_var = wa_variant-variant. " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN ON VALUE REQUEST
* TO GET THE F4 HELP FOR VARIANT
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
 EXPORTING
 is_variant = wa_variant
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
* IT_DEFAULT_FIELDCAT =
 i_save = 'A'
* I_DISPLAY_VIA_GRID = ' '
 IMPORTING
* E_EXIT =
 es_variant = wa_variant
 EXCEPTIONS
 not_found = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc = 0.
 s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN
* TO CHECK THE EXISTENCE FOR VARIANT
AT SELECTION-SCREEN.
wa_variant-variant = s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
 EXPORTING
 i_save = 'A'
 CHANGING
 cs_variant = wa_variant
 EXCEPTIONS
 wrong_input = 1
 not_found = 2
 program_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE w001.
ENDIF.
* START OF SELECTION
START-OF-SELECTION.
SELECT ebeln
 ebelp
 matnr
 werks
 menge
 FROM ekpo
 INTO TABLE it_ekpo.
* FIELD CATALOG
wa_field-fieldname = 'EBELN'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'PO #'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'EBELP'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Line Item'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MATNR'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 15.
wa_field-seltext_l = 'Material'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'WERKS'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 6.
wa_field-seltext_l = 'Plant'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MENGE'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Qty.'.
* wa_field-input = check.
* wa_field-edit = check.
wa_field-do_sum = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
* SORT W.R.T. PURCHASE ORDER NUMBER
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = check.
wa_sort-subtot = check.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
* FOR GRID TITLE
wa_title = 'Hello'.
* FOR LAYOUT
wa_layout-zebra = check.
* FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
wa_exclude-fcode = '&OUP'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&ODN'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&OAD'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* wa_exclude-fcode = '&AVE'.
* APPEND wa_exclude TO it_exclude.
* CLEAR wa_exclude.
wa_exclude-fcode = '&INFO'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* POPULATE ALL EVENTS INTO INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = it_event
 EXCEPTIONS
 list_type_wrong = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
wa_event-form = 'END'.
MODIFY it_event FROM wa_event INDEX sy-tabix.
CLEAR wa_event.
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
 i_callback_program = rep_id
* i_callback_pf_status_set = 'PF'
 i_callback_user_command = 'COMMAND'
 i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
 i_grid_title = wa_title
* I_GRID_SETTINGS =
 is_layout = wa_layout
 it_fieldcat = it_field
 it_excluding = it_exclude
* IT_SPECIAL_GROUPS =
 it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
 i_save = 'A'
 is_variant = wa_variant
 it_events = it_event
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 t_outtab = it_ekpo
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form top
* TO WRITE THE HEADER
FORM top.
REFRESH it_top.
wa_top-typ = 'S'.
wa_top-key = text-001.
wa_top-info = rep_id.
APPEND wa_top TO it_top.
CLEAR wa_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = it_top
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "top
*& Form end
* TO WRITE THE FOOTER
FORM end.
REFRESH it_end.
wa_end-typ = 'S'.
wa_end-key = text-001.
wa_end-info = rep_id.
APPEND wa_end TO it_end.
CLEAR wa_end.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = it_end
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "end
*& Form pf
* FOR PF-STATUS WITH USER DEFINED BUTTONS
* -->RT_EXTAB text
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM. "pf
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
 WHEN 'T_DOWN'.
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = 'HELLO'
 txt1 = 'USER COMMAND'
 txt2 = 'TOTAL DOWN'.
 WHEN 'DOWN'.
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = 'HELLO'
 txt1 = 'USER COMMAND'
 txt2 = 'DOWN'.
 WHEN 'UP'.
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = 'HELLO'
 txt1 = 'USER COMMAND'
 txt2 = 'UP'.
 WHEN 'T_UP'.
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = 'HELLO'
 txt1 = 'USER COMMAND'
 txt2 = 'TOTAL UP'.
ENDCASE.
ENDFORM. "command
Hope this helps you.
Thanks & Regards,
Tarun Gambhir

Adding fields to the standard Report

hi ,
could u plz tell me what r the guidelines we have to follow
while adding fields to the standard Report. (Ver ECC 6.0)
in QA32 Tcode, after executing it will generate a report there i hv to add it.
I could find structure of that main final table, i hv appended desired field also,
Now im looking into Enhancement spot for it, is there any method to do it.
Plz hv eye on it.
Regards
Vivek

Hi ,
this is the exact answer for your question.
Go to the inclide RQALVF14 in this there is a perform call_listviewer_f14, in this the output is displaying using REUSE_ALV_GRID_DISPLAY function module . before this do like this ..
modify the output table p_object_tab like this .
the output table is of structure QALS_D02 you can extend this by appending a structure with the custom fields and there is an enhancement ( i have checked it) in this routine call_listviewer_f14 in RQALVF14. Create an enhancement in this routine at the start of the routine and modify the output table using your custom code in it , then you wil get the data as well as fields into fieldcatalog,.
Regards,
Venkat Appikonda.

Problem in the creation of rfc function module

hi,
I am creating one rfc function module comparing to standard non-rfc function module. In that one i have one export parameter with the standard strcture type. but this stcture component contains with strcture type. among all these components four fields are common. but when i am trying to activate function module it is giving message you cannot use internal tables, strings,references, or strctures as components. that function module name is BAL_FILTER_CREATE and that export parameter name is that export parameter name is E_S_LOG_FILTER that associated type is BAL_S_LFIL. how can i solve the problem. pls give me solution as soon as possible.

hi,
for rfc fm's u should enable the call by value check box which will appear on that of import and export parameters. tick that one for each parameter in rfc and activate.
if helpful reward some points.
with regards,
Suresh Aluri.

Does R3 have a report or function module to process payments requests?

HI All,
I want R3 report or function module which will receive payment requests from vendor or customer and then procees it depending on the data.
Does R3 have such a report or function module to process payments requests?
Please help me.
Thanks.

yes SAP as got a function for this
you can you use trannsaction code /nF111
for these purposes

Standard Remote-Enabled Function Module to display data.

Good afternoon,
Is there any Standard Remote-Enabled Function Module which can be used to display a list of material, supplier or stocks data?
First time, I was trying to use FM link to BW Extractor as MDEX_MATERIAL_MD for Material Attributes, but these kind of FM are not Remote-Enabled and not released.
My second solution is to find a Standard Remote-Enabled Function Module which can be used to display a list of material, supplier or stocks data, but I haven't it yet.
May someone help me in this?
Thanks in advance for your answers.
Best regards,
Paul d'ORIGNY

Hi,
Suppose you want to read data from the vbrk table in ECC through a function module, then you can define the function module as "remote-enabled"(attribute tab in se37-processing type). You can try the following code out:
FUNCTION Z_EM_INVOICE.
*""Local Interface:*
*" IMPORTING
*" VALUE(I_FKDAT) TYPE FKDAT OPTIONAL
*" TABLES
*" E_VBRK STRUCTURE VBRK
*select * from vbrk into table*
e_vbrk where fkdat = i_fkdat.
ENDFUNCTION.
From BI you can call the function odule as follows:Supposing that you are calling the function module in the start routine of a dso:
data : v_dest_system TYPE char255.
data: l_vbrk type table of vbrk.
v_dest_system = 'DRDCLNT010'
CALL FUNCTION 'Z_EM_INVOICE''
destination v_dest_system
EXPORTING
i_fkdat = <passing variable>
e_vbrk = l_vbrk.
Regards,
Anjana.

Asking for the standard report or function module or class for determining no of employees under a client

Similar Messages

Maybe you are looking for