ASM Instance

Hi,
Within the same ASM instance (+ASM), Can i have a diskgroup using block device (/dev/dm-x etc) and a diskgroup using ASM volumes (ASMlib, ORCL:* etc)?
Cannot find any info how to do that. If anyone knows, please point me to the link.
Thanks a mil...
R-

But why you wanna do that?? If you are using ASMLIB then use it for all of your diskgroups otherwise dont use it at all. What is the exact scenario which is forcing you to do this??
Daljit Singh

Similar Messages

  • Can there be multiple ASM instances on single node?

    Hi,
    Can there be multiple ASM instances on single node?
    This one says No : http://www.freelists.org/archives/oracle-l/02-2008/msg00317.html
    And This one says Yes : http://www.databasejournal.com/features/oracle/article.php/3571371
    Thanks in advance.
    Thanks,
    Harsha
    Edited by: user498756 on Sep 11, 2008 2:23 AM

    ...that document doesnt say you cannot have multiple ASM instances on a node. It says "...ASM, +you only need one ASM+ instance for that computer, to manage the two database instances that use ASM."
    The fact that you only need one - and I cannot think of a good reason to have more than one - does not preclude the fact that you do seem to be able to have multiple ASM instances on a single node, each looking after its own set of disks and diskgroups.
    Again - I cannot think of a good reason to do so though!
    -Bob

  • Upgrade ASM instance database 10g to 11g

    Hi,
    In my environment, I have ASM instance database 10.2.0.3 running on solaris 10 (64-bit), I need to upgrade to ASM instance 11.1.0.6 database. please guide me an overview of steps...
    thanks in advance

    Thanks for the response,
    Sorry, In my environment I know database (10.2.0.3) is mounted in ASM diskgroups, now i have a concern
    1) If database is mounted in ASM diskgroups, could it be a database instance or it has to be only ASM instance connected to the database?
    2) As in my upgrade from ASM instance (10.2.0.3) to ASM instance (11.1.0.6), do we need to upgrade asm instance as well as database? i mean to invoke DBUA twice for upgrading ASM instance then for upgrading database as well?
    Sorry for some silly questions...please make me clear...
    Regards

  • How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance

    Hi All,
    Please let us know How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance.
    Reagrds,
    Vikas

    Assuming an agent is running on the servers you want to monitor,
    navigate to the Agent home page (Via setup --> Agent)
    When in the agent home page select 'Add Database'and press [Go]
    Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
    When done, press [Ok] to return to the agent home page.
    Regards
    Rob
    http://oemgc.wordpress.com

  • ASM instance on one node can not startup

    use dbca create database failure
    [oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
    Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log" for further details.
    [oracle@rac1 ~]$ cat "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log"
    PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]
    ORA-03135: connection lost contact
    [oracle@rac2 bin]$ ./crs_stat -t
    Name           Type           Target    State     Host
    ora....SM1.asm application    ONLINE    ONLINE    rac1
    ora....C1.lsnr application    ONLINE    ONLINE    rac1
    ora.rac1.gsd   application    ONLINE    ONLINE    rac1
    ora.rac1.ons   application    ONLINE    ONLINE    rac1
    ora.rac1.vip   application    ONLINE    ONLINE    rac1
    ora....SM2.asm application    ONLINE    OFFLINE
    ora....C2.lsnr application    ONLINE    ONLINE    rac2
    ora.rac2.gsd   application    ONLINE    ONLINE    rac2
    ora.rac2.ons   application    ONLINE    ONLINE    rac2
    ora.rac2.vip   application    ONLINE    ONLINE    rac2so i try to start asm instance on rac2
    [oracle@rac2 bin]$ ./srvctl start asm -n rac2
    PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
    rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
    rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
    rac2:ora.rac2.ASM2.asm:SQL> Disconnected
    rac2:ora.rac2.ASM2.asm:
    CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]]
      [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
    rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
    rac2:ora.rac2.ASM2.asm:
    rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
    rac2:ora.rac2.ASM2.asm:SQL> Disconnected
    rac2:ora.rac2.ASM2.asm:check the alert log find
    Mon Jul 25 17:58:23 2011
    Maximum Tranmission Unit (mtu) of the ether adapter is different
    on the node running instance 1, and this node.
    Ether adapters connecting the cluster nodes must be configured
    with identical mtu on all the nodes, for Oracle.
    Please ensure the mtu attribute of the ether adapter on all
    nodes are identical, before running Oracle.
    Mon Jul 25 17:58:23 2011
    Errors in file /opt/ora/admin/+ASM/bdump/+asm2_lmon_29711.trc:
    ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
    LMON: terminating instance due to error 27550
    Mon Jul 25 17:58:25 2011
    Shutting down instance (abort)
    License high water mark = 0
    Mon Jul 25 17:58:28 2011
    Instance terminated by LMON, pid = 29711
    Mon Jul 25 17:58:30 2011
    Instance terminated by USER, pid = 29831and i checked my eth
    [root@rac1 oracle]# ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 00:0C:29:3C:42:0C
              inet addr:192.168.40.102  Bcast:192.168.40.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:9762 errors:0 dropped:0 overruns:0 frame:0
              TX packets:6028 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:1193646 (1.1 MiB)  TX bytes:1037252 (1012.9 KiB)
              Interrupt:67 Base address:0x2400
    eth0:1    Link encap:Ethernet  HWaddr 00:0C:29:3C:42:0C
              inet addr:192.168.40.201  Bcast:192.168.40.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              Interrupt:67 Base address:0x2400
    eth1      Link encap:Ethernet  HWaddr 00:0C:29:3C:42:16
              inet addr:10.10.17.221  Bcast:10.10.17.225  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:30185 errors:0 dropped:0 overruns:0 frame:0
              TX packets:37936 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:19988844 (19.0 MiB)  TX bytes:35126056 (33.4 MiB)
              Interrupt:51 Base address:0x2480
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:52537 errors:0 dropped:0 overruns:0 frame:0
              TX packets:52537 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:4380651 (4.1 MiB)  TX bytes:4380651 (4.1 MiB)
    [root@rac2 ~]# ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 00:0C:29:9C:CC:90
              inet addr:192.168.40.103  Bcast:192.168.40.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:3665 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1489 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:563952 (550.7 KiB)  TX bytes:243127 (237.4 KiB)
              Interrupt:67 Base address:0x2400
    eth0:1    Link encap:Ethernet  HWaddr 00:0C:29:9C:CC:90
              inet addr:192.168.40.202  Bcast:192.168.40.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              Interrupt:67 Base address:0x2400
    eth1      Link encap:Ethernet  HWaddr 00:0C:29:9C:CC:9A
              inet addr:10.10.17.222  Bcast:10.10.17.225  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:38281 errors:0 dropped:0 overruns:0 frame:0
              TX packets:29683 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:35182270 (33.5 MiB)  TX bytes:19905266 (18.9 MiB)
              Interrupt:51 Base address:0x2480
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:44387 errors:0 dropped:0 overruns:0 frame:0
              TX packets:44387 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:2299383 (2.1 MiB)  TX bytes:2299383 (2.1 MiB)any idea ?
    i try to run dbca on rac2 ,it seems OK
    ============
    ASM instance still have problem,no ASM instance create in rac1
    [oracle@rac2 bin]$ ./crs_stat -t
    Name           Type           Target    State     Host
    ora.mydb.db    application    ONLINE    ONLINE    rac1
    ora....b1.inst application    ONLINE    OFFLINE
    ora....b2.inst application    ONLINE    ONLINE    rac2
    ora....SM1.asm application    ONLINE    OFFLINE
    ora....C1.lsnr application    ONLINE    ONLINE    rac1
    ora....C2.lsnr application    ONLINE    OFFLINE              =>  ora.rac1.LISTENER_RAC2.lsnr   (i do not know where this resource come from ??)
    ora.rac1.gsd   application    ONLINE    ONLINE    rac1
    ora.rac1.ons   application    ONLINE    ONLINE    rac1
    ora.rac1.vip   application    ONLINE    ONLINE    rac1
    ora....SM2.asm application    ONLINE    ONLINE    rac2
    ora....C2.lsnr application    ONLINE    ONLINE    rac2
    ora.rac2.gsd   application    ONLINE    ONLINE    rac2
    ora.rac2.ons   application    ONLINE    ONLINE    rac2
    ora.rac2.vip   application    ONLINE    ONLINE    rac2and here is my dbca.rsp file content
    [GENERAL]
    RESPONSEFILE_VERSION = "10.0.0"
    OPERATION_TYPE = "createDatabase"
    [CREATEDATABASE]
    GDBNAME = "mydb.us.oracle.com"
    SID = "mydb"
    NODELIST=rac1,rac2
    TEMPLATENAME = "/home/oracle/mydb.dbc"
    SYSPASSWORD = "Myss123456"
    SYSTEMPASSWORD = "Myss123456"
    EMCONFIGURATION = "NONE"
    DBSNMPPASSWORD = "Myss123456"
    STORAGETYPE=ASM
    DISKLIST=/dev/oracleasm/disks/VOL1,/dev/oracleasm/disks/VOL2
    DISKGROUPNAME=ORADG
    REDUNDANCY=EXTRENAL
    DISKSTRING="/dev/oracleasm/disks/*"
    ASM_SYS_PASSWORD="Myss123456"
    LISTENERS = "listener1 listener2"Edited by: 859340 on 2011-7-24 下午7:23
    Edited by: 859340 on 2011-7-24 下午7:32
    Edited by: 859340 on 2011-7-24 下午7:35
    Edited by: 859340 on 2011-7-24 下午7:51

    Hi,
    Use this tech note on MOS.
    *Instance Crash on startup with ORA-27550: Target ID protocol check failed [ID 730516.1]*
    Regards,
    Levi Pereira

  • Multiple ASM instances using single cluster install - Is it possible??

    Hi,
    I have 2 node RAC cluster installed on Linux. All the storage is on EMC. I need to setup another environment using HP storage on the same hosts. Is it possible to created second ASM instance using the same cluster install?? I wanted to have clear separation b/w EMC and HP environments and that's wondering if it's feasible to do that.
    Haven't tried it yet to see if it complains.
    Thx
    Anitha

    Anitha,
    The data migration won't happen (at least not aggressively) until you do step 2 in your list where you remove the EMC disks. That removal operation will take a long time as Oracle will have to move the data before it can complete the operation. If you want to be sure, I'd recommend creating a new disk group with one of your new disks, put a small tablespace in it, create some data in it, then add a disk to that new group and remove the original disk. Then you'll have some confidence in the procedure and verify that it works without risking your production data. After you test, you can drop the disk group and use the disks for their intended purposes.
    To answer your question, yes, that's the process exactly as I suggested it above. Should work fine--but will probably take a while to do the remove, so be prepared to leave that running for quite a while (i.e. don't expect to close the terminal and go home right after running the remove).
    Dan

  • ASM instances on 2 node Oracle RAC 10g r2  on Red Hat 4 u1

    Hi all
    I'm experiencing a problem in configuring diskgroups under +ASM instances on a two node Oracle RAC.
    I followed the official guide and also official documents from metalink site, but i'm stuck with the visibility of asm disks.
    I created fake disks on nfs with Netapp certified storage binding them to block device with the usual trick "losetup /dev/loopX /nfs/disk1 " ,
    run "oracleasm createdisk DISKX /dev/loopX" on one node and
    "oracleasm scandisks" on the other one.
    With "oracleasm listdisks" i can see the disks at OS level in both nodes , but , when i try to create and mount diskgroup in the ASM instances , on the instance on which i create the diskgroup all is well, but the other one doesn't see the disks at all, and diskgroup mount fails with :
    ERROR: no PST quorum in group 1: required 2, found 0
    Tue Sep 20 16:22:32 2005
    NOTE: cache dismounting group 1/0x6F88595E (DG1)
    NOTE: dbwr not being msg'd to dismount
    ERROR: diskgroup DG1 was not mounted
    any help would be appreciated
    thanks a lot.
    Antonello

    I'm having this same problem. Did you ever find a solution?

  • Asm instances on single system

    Hi ,
    How many ASM instance can reside on one single machine.....

    Hi,
    Only one ASM instance can run on a server.
    Mahir

  • Multiple ASM instances on a single node

    Can i have multiple ASM instances on a single node? This is to have each instance supporting different environment dev,stage etc
    Thanks
    Sannidhi

    I had been discussing the same issue with someone from Oracle. I asked for multiple ASMs on a server so that we could have seperate ASMs running for, say, 10g and 11g.
    He explained that we should think of ASM as being the same as Veritas FileSystem. We don't run multiple instances of Veritas on our servers. On single Veritas "instance" (set of drivers) provides all the Veritas Fx mountpoints on the server. Similarly, there should be only 1 ASM instance on a server.
    (substitute UFS or ZFS or CFS for Veritas in the above example and you still have only 1 filesystem manager on a server providing one type of filesystem, although you could have, say , UFS and Veritas co-exist ; just as you could have Veritas, ASM and Raw co-exist on a server).
    Hemant K Chitale
    Edited by: Hemant K Chitale on Sep 29, 2009 11:50 AM

  • Multiple ASM Instances on single node

    Hi All,
    After going through some threads it seems to me that multiple ASM instances on a node is not supported and recommended by ORACLE but i coudn't find any ORACLE document or support matrix mentioning this. Can any one give me a pointer to this. Please correct me if i am wrong and Multiple ASM instances are fully supported by ORACLE.
    Thanks,

    Multiple ASM instances on a single node are supported but not recommended due to several issues you could encounter during that kind of configuration.
    Possible interraction between those instances for identification of each disk area usage,each disk area permissions , database instance to asm instance mapping and so on, could result in unwanted behaviour, as ASM is in some way just oracle's representation of LVM.
    Intention is that any kind of distinction/separation of oracle related data under the ASM should be done through the disk groups.
    So it seems it would be better to apply this kind of logic rather than doing suspiciously magical and rare configurations that could bring you similiary strange and unexpected problems.

  • ASM instance crash due  to error ORA-27506: IPC error connecting to a port

    Hi All,
    Today the ASM instance goes down.
    When i checked the alert log I found the below error.
    ORA-27506: IPC error connecting to a port
    ORA-27300: OS system dependent operation:sendmsg failed with status: 22
    ORA-27301: OS failure message: Invalid argument
    ORA-27302: failure occurred at: sskgxpsnd1
    Please find the environment details.
    OS : RHEL-5
    DB: 11.1.0.7 2-node RAC
    I want to know the root cause of this issue.
    Please suggest.
    Thanks and Regards,

    Hi,
    Could you please upload cluster alert log and cssd.log?
    regards,
    Kishore

  • Create a new user for oracle 10G ASM instance with sysdba system privilege

    Hi,
    In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g  ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to  connnect to ASM instance.
    I'm getting the error message "ORA-01109:  database not open",When I tried to create a new user using the  below the steps in oracle 10g ASM instance
    1. Login using "sqlplus / as sysdba"
    2. Create user <username> identified by <password>;
    But in oracle 11g ASM instance, I'm able to create new  user  by connecting the ASM instance with SYSASM role without issues.
    Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
    Thanks in advance .

    Hi,
    Recreate the password file for the ASM instance as follows:
    Unix:
    orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
    Windows:
    orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
    Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
    SQL> create user ASMDBA identified by test01;
    User created.
    SQL> grant SYSASM, SYSOPER to ASMDBA;
    Grant succeeded.
    SQL> select * from v$pwfile_users;
    USERNAME SYSDBA SYSOPE SYSASM
    SYS TRUE TRUE TRUE
    ASMDBA FALSE TRUE TRUE
    Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
    Thank you

  • Issue At the time of Creating ASM instance through DBCA For 11g RAC  db :

    Hi,
    I have configured two node RAC with OEL5.
    I have installed below software successfully under different home locations.
    1) Clusterware :
    2) ASM
    3) Database
    I want to run ASM instance under separate home but when i am executing dbca from ASM home location to create asm i am facing a problem which is not traceable by me. Please help me if any body has any idea on it.
    Problem:
    Sometime(displayed below) ASM instance is running from node 1 and some times from node 2. At a time ASM in both instance is not in online state. At the end dbca is displaying ORA-01034: ORACLE not available. Please let me know what may be the exact reason for this.
    1) State 1
    Name Type Target State Host
    ora....SM1.asm application ONLINE ONLINE mac1
    ora....C1.lsnr application ONLINE ONLINE mac1
    ora.mac1.gsd application ONLINE ONLINE mac1
    ora.mac1.ons application ONLINE ONLINE mac1
    ora.mac1.vip application ONLINE ONLINE mac1
    ora....SM2.asm application ONLINE OFFLINE
    ora....C2.lsnr application ONLINE ONLINE mac2
    ora.mac2.gsd application ONLINE ONLINE mac2
    ora.mac2.ons application ONLINE ONLINE mac2
    ora.mac2.vip application ONLINE ONLINE mac2
    2)Name Type Target State Host
    ora....SM1.asm application ONLINE OFFLINE
    ora....C1.lsnr application ONLINE ONLINE mac1
    ora.mac1.gsd application ONLINE ONLINE mac1
    ora.mac1.ons application ONLINE ONLINE mac1
    ora.mac1.vip application ONLINE ONLINE mac1
    ora....SM2.asm application ONLINE ONLINE mac2
    ora....C2.lsnr application ONLINE ONLINE mac2
    ora.mac2.gsd application ONLINE ONLINE mac2
    ora.mac2.ons application ONLINE ONLINE mac2
    ora.mac2.vip application ONLINE ONLINE mac2
    With Regards,
    SNP

    Yes you are right , I have to make to sure stock budget doesn't get credited.
    If you remember in one of my other threads, i wanted to derive commitment item from Matl grp, it was for this purpose. I will derive commitment through matl group at the time of procurement / GR etc and assign a dummy commitment item to stock a/cs. Where as i will derive a consumption commiment item from consumption GLs.
    Thank you
    Chris

  • How does 1 ASM instance in a 10 node RAC cause all 10 ASM instance to hang

    Linux RHEL4
    11.2.0.1.0 GI
    11.2.0.1.0 RDBMS
    11.1.0.7.0 RDBMS
    10.2.0.4.4 RDBMS
    Yesterday we had one of the ASM instance on our 10-node cluster hang with a latch "ASM file allocation latch". Oracle support has stated we are hitting a bug with is fixed in the latest PSU.
    What I am trying to understand is how a latch on one ASM instance caused all 10 ASM instances to hang?
    Oracle Supports explanation still does not answer how all 10 ASM instance were affected other then the faulty code that the patch fixes. Bellow is info out of the SAR.
    Data Guard Site:
    ================
    ARC1 PID 21508 reports ORA-240 'control file enqueue held for more than 120 seconds' at Thu Oct 28 11:35:54 2010. This message means ARC1 PID 21508 was holding the enqueue past the maximum tine limit of 120 seconds.
    Next ARC0 PID 17398 reports ORA-16146: 'control file enqueue unavailable' at Thu Oct 28 11:36:52 2010. This means ARC0 PID 17398 tried to access the controlfile and it could get the lock.
    ARC1 PID 21508 is then killed at Thu Oct 28 11:49:57 2010.
    Killing enqueue blocker (pid=21508) on resource CF-00000000-00000000 by (pid=23078) by killing session 5.3
    We see that RSM has been restarted by Broker. This matches to the alert.log and messages showing RSM being restarted several time. i.e. RSM0 started with pid=84, OS id=27915
    Since this started happening around 11:14, the problem may have really started then instead of w/ the CF enqueue block.
    The primary appears to be shipping redo to the standby using asynchronous mode. Unless there was a gap, I do no know if ARC1 should have been doing any remote network I/O. Because a log switch to thread 1 sequence 5235 had just happened at 11:33am, I suspect it was a local disk I/O that was started at least. The ORA-240 is reported at 11:35, exactly 120 sec (or 2min) from this log switch. Notice also the entry to show the log thread 1 sequence 5234 was registered to the controlfile didn't happen yet.
    ASM Side:
    ============
    From the systemstate dump on ASM, multiple processes are waiting on 'ASM file allocation latch' and we are kind of stuck on stack:
    ksedsts()+461<-ksdxfstk()+32<-ksdxcb()+1782<-sspuser()+112<-0000003218E0C5B0<-kfuhInsert()+175<-kffilCreate()+601<-kfnsUFG()+3691<-kfnsBackground()+4382<-kfnDispatch()+527<-opiodr()+1149<-ttcpip()+1251<-opitsk()+1633<-opiino()+958<-opiodr()+1149<-opidrv()+570<-sou2o()+103<-opimai_real()+133<-ssthrdmain()+214<-main()+201<-__libc_start_main()+219
    This caused the hang on the ASM side and hence ASM was not responding to the database. The CF Enqueue issue on the database was a side effect of this.
    This is a direct <BUG:9232266> which is a duplicate of <BUG:8974548>

    Thanks Murali,
    I was little reluctent to open a tar since my experince says that its better to troubleshoot the issue yourself instead of spending time with the Oracle support :)
    Well, I got some more information on this : the sql for the process id of ASM instance is :
    Alter Diskgroup mount all;
    It looks like it is unable to mount the diskgroup and get hunged at that point , is it due to the new disk added to the system or do we missed something after adding the new disk.
    Also, the ASM process can not be killed from unix box while the ASM is down.
    Will appreciate your time if we can move in any directions from here ..
    Thanks ,
    Ankur

  • Error while starting ASM instance

    when i was trying to startup my ASM database , i was getting the following error.
    SQL> startup
    ASM instance started
    Total System Global Area 125829120 bytes
    Fixed Size 2019000 bytes
    Variable Size 98644296 bytes
    ASM Cache 25165824 bytes
    ORA-15032: not all alterations performed
    ORA-15003: diskgroup "DBDATA" already mounted in another lock name space"
    thnx in advance

    Hi,
    i was not aware of ASM anymore, i can give some more details of this.
    There was already an instance named +ASM in the host, which has the diskgroup 'DBDATA' created.
    But now i have created a new instance and i was trying to connect to the same diskgroup.
    I dont have permission of the root, but i have the oracle login.
    could u pleaze help me in this regard...
    i need to connect to the diskgroup, if i try to stop the other instance, i was not getting the error, but the diskgroup is getting dis-mounted.
    thnx alot for the replies

  • How to add one more database to an ASM instance

    Dear Gurus,
    I Created an ASM Instance and Database. Now I would like to install one more database and use the ASM instance to manage my disks.
    I tried using DBCA, It is not detecting ASM instance not sure why it is giving the problem.
    Thanks in advance.

    adchanana : I refered thread written by adchanana, I was able to fix my problem
    thanks

Maybe you are looking for

  • Cannot send email from 3 accounts Mac Pro

    My brand new Mac Pro cannot send email using Gmail, Shaw, or iCloud.  At times I can send a simple test message, other times I cannot send.  It seems the more data in the email, it for sure cannot be sent.  The sent messages get stuck in the Out Box.

  • Mac Pro with Wake on Demand enabled wakes up but never goes to sleep again

    Hey, i was using Wake on Lan since OS 10.5 Leopard for waking my Mac up with a Magic Packet. Since 10.6 this brilliant feature was removed and replaced by "wake on demand" wich lets your computer wake up every 2 hours for a few seconds (very ultra an

  • How do I change my iCloud username and password without loosening my music

    My mum just gave me her iPad and she brought me some music from iTunes useing her account for me. I've now changed the iTunes account to my name and details, but now it doesn't match the iCloud account. How do I change the iCloud account to my name w

  • Displaying Business Partner Number in IDOC status

    I am trying to create a business partner using idoc CRMXIF_PARTNER_SAVE_M03 in we19. Idoc is getting created but does not display the business partner number in 53 status message. When i check the in BP transaction using the last name it shows i.e. i

  • Dynamic Expression Evaluation in AS 3

    Hi all, AS 2 had the eval() function, but it was removed in AS 3. Does anyone know of a way to dynamically evaluate an expression in AS 3+? I'm trying to impliment a feature that allows a user to define the behavior of a component based on the evalua