ASR 1006 with IOS 3.13.1S, NetFlow commands not working

Question

Hi,
We have Cisco ASR1006 router with IOS asr1000rp1-advipservicesk9.03.13.01.S.154-3.S1-ext.bin, we have recently upgrade IOS from asr1000rp1-advipservicesk9.02.03.02.122-33.XNC2.bin.
After upgrading the IOS ip flow ingress and ip flow egress command is not working.
Please suggest on configuring NetFlow commands on this.
Regards
MAC

Answer 1

Also try this link, found if you follow the URL above, and I have made some notes about configuring inbound and outbound flow monitoring :-
http://docwiki.cisco.com/wiki/Migrating_from_Traditional_to_Flexible_NetFlow#Flexible_NetFlow_Migration_in_Practice
That article was referred in these release notes but don’t follow the link in the release notes, use the link above as it seems to have moved;
http://www.cisco.com/c/en/us/td/docs/routers/asr1000/release/notes/asr1k_rn_rel_notes/asr1k_feats_important_notes_313s.html#pgfId-3455900
The syntax I have used is almost the same, except that I don’t think you can quite have the 2 options they mention in the last line;
flow exporter FlowExporter1
  destination 192.168.9.101
  transport udp 9996
  export-protocol netflow-v5
  source FastEthernet 0/1
flow monitor FlowMonitor1
  record netflow ipv4 original-input
  exporter FlowExporter1
  cache timeout active 1
  cache timeout inactive 15
interface FastEthernet 0/1
  ip flow monitor FlowMonitor1 [input|output]  <<<  with the netflow record above only input is ok
According to the command reference I looked at when you use the ipv4 ‘netflow’ flow record with ‘original-input’, it can only monitor inbound packets and vice-versa for ‘original-output’, therefore I think you need the pair of settings as we have done.
[see here http://www.cisco.com/c/en/us/td/docs/ios/fnetflow/configuration/guide/12_2sr/fnf_12_2_sr_book/get_start_cfg_fnflow.html#wp1059480 ]
flow monitor FlowMonitor1
  record netflow ipv4 original-input
flow monitor FlowMonitor2
  record netflow ipv4 original-output
interface FastEthernet 0/1
  ip flow monitor FlowMonitor1 input
  ip flow monitor FlowMonitor2 output
Rgds
Ian