Asset created via AS91 not visible in Asset history sheet

HI,
I have transferred an asset from legacy system . Created teh same via AS91. But the same is not visible in Asset History Sheet
S_ALR_87012048 . Please let me know why.
Regards
SR

Hi SR,
S_ALR_87012048 is an Asset transaction report which is updated only when transaction like (acquisition, retirement, etc) is performed. Values of this report are fetched from ANEP table.
For Asset history sheet, you can check S_ALR_87011964.
Thanks,
Mayank

Similar Messages

Which table contains net book value for Assets created with AS91.

Which table contains net book value for Assets created with AS91.
I have a problem locating where the net book value is stored in SAP. Is it simply calculated and not stored in any one place? I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on. If it is stored in a table some place, can anyone please let me know!
Thank you all

Hi anar.samadzade & Michael Stewart
It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
Gross Block & Accumulate Dep you will get from Table: ANLC
http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
Dear anar.samadzade Ask Questions politely
Regards
Viswa

Replicated sales order not visible in transaction history

Hi,
I am working on configuring business roles. The sales order gets replicated to ECC. The ECC sales order is visible in document flow in SAP GUI in transaction CRMD_ORDER. However the same ECC sales order number is not visible in transaction history Assignment block in Web UI. I tried even standard salespro role, still not able to view ECC sales order. Would you please help me the steps to be followed to make replicated sales orders visible in Web UI.
Appreciate your help.
With regards,
Ravi

Hi, Ravi
You have to set allowed transaction types for fact sheet.
Denis.

Salesorder created using BAPI_SALESORDER_CREATEFROMDAT2 not visible in VBAK

Hi Experts,
I created sales order using BAPI_SALESORDER_CREATEFROMDAT2, further salesorder ID was also indicated after creation.
But the same order ID is not visible in SD standard table VBAK.
Pls guide me to a valid standard CREATE BAPI for Sales order.
Regards,
Romi Malik

Hi Romi,
If you created a document through BAPI and it does not appear in the database afterwards, the logical conclusion is that ...
No it wasn't really created
With BAPIs for sales order data loading, there is no automatic COMMIT! (check SAP notes).
You need to add the call to BAPI BAPI_TRANSACTION_COMMIT to save to DB.
Regards,
Franck

Asset acquisition value is not updating in Asset history sheet & AW01N

Hi,
The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
I have also checked the below link but still i am persisting the same problem.
Asset acquisition value not updating
Regards
Amit

Hi Amit,
check note 366848.
Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.
At first run the report RACORR110_B. Check the field ANLC-ANSWL bevor and after running the report.
The report RACORR110_B accumulates the values of the asset line items and writes the result in the field ANLC-ANSWL.
After this, please start the report RACORR55. This report forwards the values in the following year.
(If this is not the reason (ANLC is correct), the report makes nothing.)
Regards Bernhard

Newly created KM Repositories not visible in KM Content Area

Hi
I created a new KM Repository (File system, Business Objects, etc) and the same is not visible in the KM content area.
Our portal version : Poral 7 enhancement package 1 SP 05.
Thanks in advance
Lakshmi

Hello,
Did you have a look under System Administration - Monitoring - Knowledge Management - Component Monitor. Are the light all green ? If not, check from there.
Best regards.
The-Hung Nguyen

Create supplier button not visible

Hi Gurus
We are running r12 on solaris 5.10. We have one custom responsibility "KGL AP Superuser".
Previously we had a option of “Create Supplier” option under KGL AP Superuser--> supplier --> Entry. Now that option is not visible. But It is there is TEST CLONE. How do I enable or visible this in PRODUCTION.
Regards
Musaddaq

Hi Bob,
Thanks for your response. Could you please let me know where can i find steps or video to create application in windows.
Vjay

Oppty created by emp not visible to his reporting mgr

Hi all
          One of employee has created opportunities in crm and his reporting manager is not able to see the created oppty .
(reporting heirachy is maintained ) what could be the reason plse help / guide

Hi Amit,
One of employee has created opportunities in CRM and his reporting manager is not able to see the created Opportunity, for this
We can assume 3 kinds of reasons, like:
1.     Need to check the status of already visible Opportunities (how it is like: open or in process or release)
2.     Need to check the Priority part of already visible Opportunities (how it is like: high or medium or low)
3.     If it has Questionnaire need to check Probability chance of success of visible Opportunities and compare your not visible OPPT,
With these reasons we can find out where exactly the problem is running,
From the above information if you get any sort of re solution for your task could you please give me sum Reward points by clicking in your left hand side,
Cheers,
Sunil.

Track P.O.no.against Asset created via AUC settlement

Hi Friends,
We have a scenario wherein an AUC is populated in a P.O.as account assignment object. Goods Receipt entries are made for these P.O.s and the AUC gets values therefrom. This AUC is then settled to a Final Asset.
We would like to know whether there is any way to track the P.O.no.against the Final Asset. This maybe through a report, or through some table entries.
There's a t code AIAZ, but it tracks only the asset mentioned in the P.O., which in our case is the AUC. Table EKKN also tracks the account assignments for Purchase Orders.
Let's say the AUC has 40 line items, whereas there are 5 Final Assets as settlement receivers.When the settlement entries are made from AUC to Final Asset, 5 entries will be generated in the foreground, but can we see the entries generated internally by the system, as in to see how the system has allocated values?
Regards,
Varun

Hi Preeti,
The t code FIAAIN_PO_TRACK mentioned above does not exist in our system. Does it need to be developed?
Regards,
Varun

Fonts not visible on Assets tab

I am running Creative Cloud on OS-X 10.9 with all software up to date. I have Muse, Photoshop, Illustrator and several other apps installed and up to date.
I have noticed recently that if I go to the Assets tab on Creative Cloud, it is blank. No Files button, no Fonts button, etc. Yet I have fonts that are being sync'd from typekit at least. Is there any reason for this problem?
Any help would be most welcome.

I am running Creative Cloud on OS-X 10.9 with all software up to date. I have Muse, Photoshop, Illustrator and several other apps installed and up to date.
I have noticed recently that if I go to the Assets tab on Creative Cloud, it is blank. No Files button, no Fonts button, etc. Yet I have fonts that are being sync'd from typekit at least. Is there any reason for this problem?
Any help would be most welcome.

Files not visible in Assets? (was - Dreamweaver question)

Why in Dreamwaever I can't see some files on my "ASSETS" page, but the can be seen on my "FILES" page?

jpg. I've got 17 sites up in Dreamweaver starting back with CS3 and this
has never happened before. If I see them under files i should see them in
assets. Any idea why?

Asset Gl balances are not matching with Asset history

Hi Gurus,
I run the ABST2 transaction it is giving the error message .
Company code Asset balance sheet values are not completely posted
Message no. MQ554
Diagnosis
The asset balance sheet values in Financial Accounting are not posted
all depreciation areas in company code WIM to be converted.
Procedure
Start posting in Asset Accounting under Periodic processing.
Carry out an update run even if no documents are to be posted in the
test run.
Proceed

Hi gurus,
I executed in back ground. Still not matching.

GN_INVOICE_CREATE - Creates Invoice but not visible (for Report RVAFSS00 )

Hi,
I am running GN_INVOICE_CREATE using SE37. I have supplied the data and stepped through the code. At the end of the execution - I get a successful message stating that the "Document 9000007 is saved". If I go into VF03 and try to bring up Billing document 9000007 - I get the error message "Billing document 9000007 does not exist."
I am not sure if i am supplying all of the input parameters correctly to make sure that the transaction is committed. I cannot find enough documentation about GN_INVOICE_CREATE parameters. The only information I did find for the input is under the Billing (SD-BIL)->Billing->The General Billing Interface->Function Module Parameter at http://help.sap.com/saphelp_46c/helpdata/en/dd/5615db545a11d1a7020000e829fd11/content.htm and http://help.sap.com/saphelp_46c/helpdata/en/dd/5615b4545a11d1a7020000e829fd11/content.htm . But that does not describes all of the input parameters like (VBSK_I, WITH_POSTING, CALLER_TYPE, I_WITHOUT_REFRESH, ID_NO_ENQUEUE, ID_KVORG, ID_NO_DIALOG, ID_NEW_CANCELLATION)
Do I need to create a wrapper RFC and call a BAPI_COMMIT_WORK as in BAPI_SALESORDER_CREATEFROMDAT2? Or am i passing the parameters incorrectly:
Here is what I am passing in SE 37:
DELIVERY_DATE =                   08/14/2006
INVOICE_DATE =                     08/14/2006
INVOICE_TYPE =                     FX
PRICING_DATE
VBSK_I
WITH_POSTING =                     A
CALLER_TYPE
I_WITHOUT_REFRESH =                X
ID_NO_ENQUEUE
ID_KVORG =                         06
ID_NO_DIALOG =                     X
ID_NEW_CANCELLATION
The XKOMFKGN and XKOMFKKO tables I believe are correct based on the Communication Structure help files.
Any help in figuring this out is appreciated. Also, if you can let me know what the following field inputs are -VBSK_I, WITH_POSTING, CALLER_TYPE, I_WITHOUT_REFRESH, ID_NO_ENQUEUE, ID_KVORG, ID_NO_DIALOG, ID_NEW_CANCELLATION.
The reason I am going through this RFC is that we are looking at using Report RVAFSS00 to import a file that then runs the GN_INVOICE_CREATE to create billing documents with external transactions as defined in the General Billing interface.
Regards,
Jay

Did not find the documentation for the fm any where, i think best place to look for is OSS.
Parameter: ID_NO_DIALOG is for suppressing some shipping related screen and ID_NO_ENQUEUE is for locking sales order or delivery doc.
By using where used list of the function module, some times it's possible to find out the use of other parameters.
Hope this helps.
Regards
Sridhar

"Create Limit" Item not visible in Shopping Cart for Employee

Hi Experts,
The employee user has the following roles in SRM 701 system.
/SAPSRM/EMPLOYEE
/SAPSRM/EMPLOYEE_EHP1. The user is not able to see the "Create Limit Item" option in Shopping cart & hence not able to create a limit item in the shopping cart.
The Purchase user has the following roles in SRM 701 system.
/SAPSRM/OP_PURCHASER_ADMIN
/SAPSRM/OP_PURCHASER
/SAPSRM/OP_PURCHASER_EHP1. This user is able to create Limit Item in the shopping cart using the "Add Item" Menu.
My requirement is to allow the users of type "Employee" to allow creating the limit items in the shopping cart. Could you please give some guidance on what needs to be done?
Thank you.
Thanks & Regards
Kasee

Hello Kasee,
As per the details given by you, you are using a mix of SRM70 and SRM 701 roles for the same user and hence system behavior will not be correct and it will lead to issues.
I suggest you to try the scenario with user having roles of one release i.e. either assign SRM 70 or SRM 701 roles.
Also if you are using portal , there also you have to map the user roles accordingly.
Moreover with SRM 701 we have the Easy Shopping cart delivered to customers where the user can only add items from Catalogs or Free text ones. You will not get different options like provided in the professional or normal shopping cart used in the SRM 70 releases.
With the /SAPSRM/EMPLOYEE role ( SRM 70 ) in the abap system and portal, you will get an option to add limit items in the SC's.
Same applies to the OP purchaser roles. Its not recommended to use /SAPSRM/OP_PURCHASER & /SAPSRMOP_PURCHASER_EHP1 roles together for one user.
You can also refer to the note 1476447 SAP SRM 7.0 EHP1 : Important info on New Functionality for more references.
Hope this will answer your query here.
Thanks & Best Regards,
Rahul
Edited by: Rahul Rastogi on Jan 11, 2012 9:53 AM

Deliverable Created in contract not visible in project management

Hi All,
We are using the deliverable tracking system of oracle project contract for creation of requisition of project related items.But those deliverable can not be seen in Project management screen. Is there any way to see these deliverables in project management?
Thanks In Advance
Saptarshi

Hi
By Oracle design there is no link between OKE Deliverables and the Project Management Deliverables.
Those are managed on separate tables.
You may consider customizing the system using API to create a PJT deliverable from an OKE deliverable, maintaining a DFF attribute to see the link between the two entities. My idea is to have something similar to Oracle's solution that creates an event in Projects Billing from a billing event that user creates in OKE.
Dina

Asset created via AS91 not visible in Asset history sheet

Similar Messages

Maybe you are looking for