Asset unplanned depreciation posted wrongly

Dear all,
For 100 assets unplanned depreciation posted wrongly. In AB08 reversed the documents but FI document is not generating for that. After this when I am doing repeat run in AFAB then normal depreciation is getting effected by this run. How to reverse the previous wrong run and post correct one Kindly suggest. Its very urgent.
Regards
Roomi

you can reverse posted depreciation by using OASV, but be VERY careful
that you reverse the FI and CO postings.
Thanks & Regards,
Suresh

Similar Messages

Asset Unplanned Depreciation posting for period 12 where ord dep is posted

Dear Experts,
I have a requirement where i want to post Unplanned/Manual depreciation for asset for period 12 where i have already posted ordinary depreciation and now when i am trying to change the post key i am getting a message "Enter a depreciation key with 'depreciation by days'
Is their any possibility where i can post some depreciation amount manually or through unplanned depreciation for period 12 without disturbing Planned depreciation amount.
Regards,
Rahul

No,
a depreciation key with 'depreciation by days' you can only change in a depreciation key with 'depreciation by days'
This is set-up in the depreciation key
This is the help:
Depreciation calculation to exact day
Specifies that the system calculates depreciation to the day.
Use
Any period control methods entered in the depreciation key are ignored for the entire useful life of the asset. This applies to all transactions (acquisitions, retirements, and transfers). The system always uses the asset value date as the depreciation start date.
The "depreciation to the day" function becomes active for an asset as soon as the asset has a corresponding depreciation key and the asset is capitalized (posted to). Once this takes place, it is no longer possible to switch off this function for the asset, even if you change the depreciation key. On the other hand, it is not possible to activate this function for an asset after it has already been capitalized using a different depreciation key.

Block the Asset for Depreciation Posting

Hi All,
Can anybody please tell me as to how to block the asset from depreciation posting. I need to stop the depreciaiton being posted to some assets.
Regards,
S.Suman

Tick the "DEACT" check box in depreciation area tab in asset master (AS02). This will deactivate depreciation posting to that perticular asset.
Harshal

Unplanned depreciation Posting

Dear All,
My client is following Jan -Dec.
1.They have captilized asset on 31.12.2006 but for 2007 they have not calculated any depreciation on that asset ( wrongly they have specified Dep start date 01.12.2007) they want to charge the depreciation for 2007 for that asset from Jan to december. Does by changing the Dep start date (01.01.2007)the system will calculate the dep fom jan to dec and post when AFAB is executed for 12 period( total amount of dep for 12 periods is posted ). Or we need to run dep for each period seperately.
2. Due to audit adjustment they want to charge the unplanned depreciation for one Asset which is captilized in previous year,where the Depreciation key is automatic .We tried to use ABAA transaction type 640 and system is prompting message " Dep are 01 allowed Unplaned dep posting is Zero"
-change the Depreciation key?
while charging the Unplanned dep do we need to change the DEp key to "MANU".
Please assit.
Thanks
Stephen

Hi
Change the Dep Key - MANU and post the dep manually thru ABMA.

Full unplanned depreciation posted into period

Hello,
posting an unplanned depreciation SAP AA divides the full value between all remaining periods of the year.
Is there a way to change the behavior, so that the full value is posted to the month it is posted?
I have found hardly any customizing settings for unplanned depreciation and I found no documentation to how it is calculated.
Can anyone help me
Regards
Anton

Hi Anton,
You did not mentioned what transaction code you used in posting your unplanned depreciation before you got the scenario you described in your posting.
For you to post unplanned depreciation for a specific month without the system distributing the full value between all remaining periods of the year, use transaction code ABAA.
It is important that you complete the following fields correctly.
1. Company Code : Specify appropriate CC
2. Asset : Specify the asset number
3. Sub-number : Specify if you have one, otherwise, leave blank
4. Document Date : Specify doument date
5. Posting Date : Specify Posting date
6. Period : It is important that you specify the period you want to post the unplanned depreciation to. If you leave blank, the system would just use your posting date and may distribute the amount over the remaining periods of the year.
7. Trans. Type : 640 (Unplanned depreciation on old assets data)
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Need your in puts on Unplaned Depreciation posting.

Hi Friends,
When i tried to post a unplanned depreciation i am getting a below error message, please help in resolving this.
I am using ABAA t-code to post the unplnned Depreciation. using ttype-640.
Diagnosis
    This posting cannot be performed, since manual depreciati
    posted in the amount of            0,00 in area 01.
Procedure
    Check the transaction type entered, or change the posting
    Caution: If the amount concerned is 0, this could be the
    situations:
    1. The asset does not have any net book value; in this ca
       check the transaction as described above.
    2. The asset has a depreciation key with automatic deprec
       calculation. However, if you want to include depreciat
       to the automatically calculated depreciation, it has t
       depreciation.
       Otherwise, you should use a depreciation key that does
       automatic depreciation (SAP-supplied key: MANU).
Thanks in advance
kmb

Hi,
why don´t you follow the message? There are 2 points mentioned. Does one of it apply to your situation?
Regards,
Markus

Credit memo for asset with depreciation posted

HI,
There is requirement to pass a credit memo for an asset.
The asset was purchased on 01.04.10.
And have been depreciated till 31.05.11.
Now the client want to pass credit memo for the full acquisition value.
My issue is when I am passing the entry through ABGF - ... in Next Year
System is throwing error stating the value is going negative.
Then we passed the write up for the depreciated value as on 01.04.10.
Still system is giving the same error message.
Please suggest on what date should I pass the write up to clear the whole posted depreciation and pass the credit memo.

Hi,
Go to asset master change, in depreciation are tab double click on depreciation are number then select negative values allowed check box
Hope this will help you.
thanks!

Deleting Asset with Depreciation Posting

Hello,
My user has created the asset in the incorrect asset class, but this asset has already being depreciated last period and I can't use the AS06 transaction to delete it.
How do I delete this asset to create the new one in the correct class?
Regards
Barbara

You transfer the asset from one asset class to another -- using intracompany transfer ABUMN.

Reverse a posted unplanned depreciation

Hello,
I have created a unplanned depreciation action of an asset by using ABBA and posted the unplanned depreciation by AFAB.
Later, I found that this asset should not post any depreciation. Can I ask are there any ways to correct this mistake action?
Many thanks
Sunny

Hello,
I have the following case:
There is Unplanned depreciation posted in the previus years and the users wants to make Write-up.
After Write-up (transaction 730) with the proper amount on 31.12.2010 the system recalculate Ordinary depreciation in December.
This recalculation is posted via AFAB in 12.2010 but the users complain and do not want to recalcuate Ord. depreciation.
The question is:
Is there a way to post Write-up (730) without to recalculate Ordinary depreciation.
I have tried to make some changes in the depreciation key (the base value) but I can not succeed.
Also I have tried to to use ABAA with Z* transaction type to debit Unplanned depreciatino but the result is the same.
Thank you in advance,
Silvia

Post manual/unplanned depreciation in previous period

Dear Experts,
I really appreciate for your advices on the following issue.
I have posted depreciation up to period 9, 2010. However, there's an unplanned depreciation journal that was missed to be posted on period 8, 2010. Therefore, I tried to create the unplanned depreciation journal on period 8, 2010 (t-code ABAA).
When I tried to execute the depreciation (t-code AFAB) on period 8, 2010 with Repeat, Restart, and Unplanned Posting Run, the depreciation could not be posted. Then I tried to execute the depreciation on period 9, 2010 with Repeat Posting Run and the unplanned depreciation posted through ABAA on period 8, 2010 is posted on period 9, 2010.
I have an objective to post the the unplanned depreciation on period 8, 2010 instead of period 9, 2010 even though the depreciation has been posted up to period 9, 2010.
I really appreciate for your advices on how to post unplanned/manual depreciation on previous period or if there is any other work around available for this matter.
Thank you.
Best regards,
Frans Sunarja

Hi Frans
You have 3 options
Option 1 SAP recommended, but too cumbersome
You can reverse the depreciation posting using ABF1
refer this thread for more details
Unable to post depreciation- Error AA730
Option 2
Else, pass a manual JV to shift the depreciation from current month to previous month.... You can remove the auto posting tick in FS00 for depreciation for the time being
The JV shall be Dep a/c Dr and a Balance sheet a/c credit in Previous period AND opposite entry in current period... This balance sheet account shall be clubbed with Accum Dep a/c in your FSV (financial statement version)
Option 3
Same as option 2.... Use T code OASV to pass this JV
Use Accum Dep a/c instead of a balance sheet account... OASV will allow you to pass JV into recon account
Regards
Ajay M

Re: Write - Up Unplanned Depreciation

Hi All,
I tried to write up the Unplanned Depreciation using Transaction Code.ABZU
Am getting an Error : You Cannot Post Write- ups
You cannot post write-ups
Message no. AA402
Diagnosis
None of the areas to be posted in accordance with the transaction type entered manages one of the depreciation types entered or cumulative values.
Procedure
Check the transaction type.
But i have checked with the Transaction Code : OAXE
I have maintained the Depreciation area 01 & 32 Group in the transaction Type defined by me ZC0 by copying the transaction type 731.
Still am getting the same issue. Can any one give me the right solution.
Regards,
vviek

Hi
Write-ups are used for correction of depreciation values calculated in
the past (closed fiscal years). It is not possible to post write-ups to
assets that have been acquired within the current year. If you attempt
this, you will receive error AA402. The R/3 Library documentation describes    the procedure for write-ups as well as the two situations where write-ups can be used.
To correct the dep. amount, you may use unplanned depreciation posting
(txn ABAA) .
Regards
Javier

Unplanned depreciation error

Hi
When i try to post unplanned depreciation for the transaction type 640 system is showing the following error
Posting with trans.type 640 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 640 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Can any one help me in this regard.
govind
Edited by: govindaraj s on May 23, 2009 12:59 PM

Check this link where the same topic was discussed
[How to reverse unplanned depreciation posted in SAP (ABAA), Is it thru ABSO ?|http://sap.ittoolbox.com/groups/technical-functional/sap-sem/how-to-reverse-unplanned-depreciation-posted-in-sap-abaa-is-it-thru-abso-2726743]
thanks
G. Lakshmipathi

OAYC can not modify the the last depreciation posting year and month

Dear all,
I will set the asset last depreciation posting fiscal year and period, but, in the OAYC T-CODE, the fiscal year and period feilds is unabled.
use F1 key, the detail message is :
Fiscal year of last depreciation posting
In this field, the system enters the fiscal year for which depreciation was last posted. If legacy data transfer is carried out during the course of the fiscal year, you must manually update this field.
The field is not available for input if legacy data not transferred within the fiscal year, or if depreciation is not posted in this depreciation area.
But I do not how to correct it .
Please help me. thanks.
Passion Wu

Hi,
Answer for your query is available in your question only.
The field is not available for input if legacy data not transferred within the fiscal year, or if depreciation is not posted in this depreciation area
There are 2 ways to upload the legacy asset to the SAP system.
1) Legacy asset upload at previous fiscal year end
2) Legacy asset upload during current fiscal year
When you use the 2nd method only, system will allows you to enter those last posted dep period and fiscal year OAYC.
In this context your legacy asset transfer date should fall within the current fiscal year.
Ex: If your FY is APR2MAR, then your transfer date cannot be the end date of last closed fiscal year.(31.03.2009)
It should be like 30.04.2009 or 31.05.2009 or 30.06.2009 and so on.............
Hope this will help you.
Thanks,
Srinu..
OAYC_SRBORIGI

Depreciation posted high ani pettu

Hi
for the asset 3606000348 depreciation posted high in the month of january and for remaining months depreciation posted common.This is happende for all 4 years. life period is 4 years. could some one please let me know what could be the reason.
regards,
JC

JC:
You will need to go to AW01N, asset value display, and click into the planning tab/posted tab - if you keep drilling in, it will explain to you how the depreciation is being calculated. Sounds like something with the period control and depreciation key.
Thanks,
Tammy

Unplanned depreciation in FI Fixed Assets does not post to FI-GL

We used transaction ABAA (unplanned depreciation) movement typ 640 to post a depreciation amount - The document has been posted in the AA module ( it is now showing against the Asset in the transaction Asset Explorer transactions AW01N and AB03) however we do not manage to get it posted to FI and consequently have a reconciliation difference between the value in the AA module and the FI-GL.
Can anybody please give advise how we can correct this?
We tried following so far:
(1) post the unplanned depreciation document using transaction AFAB - depreciation posting run.
No documents created.
The message log displays "You want to run the next planned run of the depreciation posting run in period 014. However, the last planned posting run was already performed for period 014."
Than tried to execute the transaction with selection 'repeat' , 'restart', 'unplanned depreciation run': no documents posted either ......
(2) reverse the unplanned depreciation document using transaction AB08
This failed; the system reports following
"No FI document was generated for the asset transaction" and subsequently after clicking the 'post'button' an error"No unique header information transferred into Accounting
Message no. RW001
Diagnosis: The interface into Accounting requires:
Header data
Item data
Currency data
The header data is missing, or several items were transferred.
System Response
Processing of the data in the Accounting interface is not possible.
Procedure
This is a system error of the application which was called up
So..............No idea how to get rid of this document.
Can anybody help?
Kind Regards,
Arjan

Hi Suresh,
Thanks for you feedback.
I had already tried your suggestion; it was the actions which I mentioned under the point (1) in my message.
The system did not generate any FI document, this is exactly the unexpected problem that I am trying to solve.
Any further suggestions?
Kind Regards,
Arjan

Asset unplanned depreciation posted wrongly

Similar Messages

Maybe you are looking for