Assign new Item revisions to Multiple Organizations

Hi All,
We are creating New item revision for an existing item in Master Organization and want to assign new item Revision to all the child organizations because we got nearly 100 child organizations.
I know we can achieve this by implementing ECO. But we are not using ECO module.
Please let me known any concurrent program, Interface or API through which I can achieve.
Your valuable inputs are highly appreciable.
Regards
Venkat

Replay to Questions.
a)Is the item used in all the 100 Orgs?
Replay : Yap Item assigned to all Orgs.
b)Is the Item having centralized control for all the 100 orgs?
Replay : Yap its centralize users can change only at Master Org.
regards,
Ven

Similar Messages

When I assign new Item created to single org it is not shown on PO.

One item is created and assigned to single org but not able to view on PO. While I do assign all it is seen on PO.
Setup>Organization>finantial option>supplier purchesing>inv org --> is NOT item master but other org. Is this problem is becoz of this. Kindly help.

Have you assigned the item to the org used on financial options?
Sandeep Gandhi

Standard API to assign an Item to an Inventory Organization?

Dear All,
Please tell me which is the standard API that need to be used for item assign to an inventory organization?
Many thanks in advance...

Thank you for your response....
Please tell me what is the procedure that i need to use for assigning to the inventory organisation
I am using ego_item_pub.process_items to create the item in Master Inventory Orgaanization,
After creating the item in Master Organization Item need to assign to a child inventory organization
Many thanks...

Passing Multiple Selected List Items to a "New Item" Form in Another List with Multiselect Lookup Field

Hi!
Version Info: SharePoint 2013 Server Standard (*BTW...I do not have access to Visual Studio*)
I have two lists, let's call them
-Assets
-Asset Checkouts
"Assets" is the parent list, and "Asset Checkouts" has a lookup column (multiselect) which is tied to the serial # column in the "Assets" list.
Basically, what I need to accomplish is this: I would like to be able to select multiple list items in the "Assets" list, and create a new item in "Asset Checkouts", and pre-fill the multiselect lookup column in the NewItem form
for "Asset Checkouts" with the values from the selected items in "Assets".
Any ideas or suggestions on how to do this would be most appreciated!
Thanks!

Hi,
According your description, you might want to add new item in "Asset Checkouts" list when selecting items in "Assets" list.
If so, we can achieve it with SharePoint Client Object Model.
We can add a button in the "Assets" list form page, when selecting items, we can take down the values of columns of the selected items, then click this button which will create
new item in "Asset Checkouts" list with the values needed.
Here are some links will provide more information about how to achieve it:
Use
SP.ListOperation.Selection.getSelectedItems() Method to get the list items being selected
http://msdn.microsoft.com/en-us/library/ff409526(v=office.14).aspx
How to: Create, Update, and Delete List Items Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185011(v=office.14).aspx
Add ListItem with Lookup Field using Client Object Model (ECMA)
http://notuserfriendly.wordpress.com/2013/03/14/add-listitem-with-lookup-field-using-client-object-model-ecma/
Or if you just want to refer to the other columns in "Assets" list when add new item in "Asset Checkouts" list, we can insert the "Assets" list web part into the NewForm page
of the "Asset Checkouts" list, then when we add new item in the "Asset Checkouts" list, we will be able to look through the "Assets" list before we select values for the Lookup column.
To add web part into the NewForm.aspx, we need to find the button "Default New Form" from ribbon under "List" tab, then we can add web part in the NewForm.aspx.
In the ribbon, click the button “Default New Form”:
Then we can add web part into NewForm.aspx:
Best regards
Patrick Liang
TechNet Community Support

DVWP with Multiple Item Form duplicates values on the screen on new item

Hello,
I have created a custom page in SPD called Submit.aspx. I have 3 custom lists (A,B and C). On that page I have two list webparts (from list A and B) and one multiple item form DVWP (list C). I have edited the list webparts to display the Add new item link only.
Sometimes when a user adds a new item numerical values are duplicated on the screen from the item below (see the screenshot). It happens only on the screen. When a user saves the form or refreshes it the values disappear. How can I fix this to not duplicate
the values when a new item is created. Projects on the list are sorted alphabetically. The item before the last one on the screenshot is the new item that has identical values as the last item. On save or refresh duplicate values
disappear from a new item.

Hi LetMe, it would be difficult for anyone to help you with the amount of customization you've done, unless you provide the code for us to check.
cameron rautmann

Grouping multiple news items into a single e-mail notification?

Hi,
We are on EP5 SP6 and would like to know if anyone knows how to group multiple news items into a single e-mail notification.
Thank you.

Hi Dirk,
Thanks for your reply.
We are looking to have newsletter capabilities in the portal. A good example would be the "Dev Today Newsletter - News Perspective" available from SDN. Essentially we would like users of our portal installation to choose the topics/news that they are interested in receiving and the frequency and then get that content in a formatted e-mail in the same manner that the Dev Today Newsletter is received.
All suugestions on achieving this outcome are welcome and much appreciated.
Thanks,
Rich
Message was edited by: Richard Maziarz

Created new Item category, guidence required for assignment.

Dear All,
We have created new Item Category for Advance Booking, now we required guidence from you, in what combination we have to assign Item Category to Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Please advice.
Regards
Prashant

Hello,
We have created new Item Category for Advance Booking, now we required
guidence from you, in what combination we have to assign Item Category to
Sales Order type. i.e.Sales Doc. Type-Item cat.group-Item usage-ItemCat-HgLvItm.
Important fieldsfor Item category determination process:
Define Item Categories*
Define Item Category Groups*
Define Default Item cat grp for Material Type*
Define Item Category Usage*
Assign Item Categories*
The method of assignment of item category is carried out in t-code VOV4 and please have a look into this t-code and you wil have the exact idea regarding the sequence/combination for item category determination.
Regards,
Sarthak

Create Sharepoint 2013/2010 Modal Forms for New Items, Multiple Lists

I have a main page with 4 buttons. Each button is linked to a different list. My question is: how can I make it so that when a user clicks on a button, the new item form pops up? And then, once submitted, the new item form closes and the user is once again
looking at just the mina page?
I have seen many suggestions on the web for multiple buttons with one list, but not any for multiple buttons for multiple lists.
I am relatively new to JQuery/coding, so if you have an answer please explain it in detail (think "Coding for Dummies," or some such format). I use a JQuery Doc. Library, and a Content Editor to reference to the specific JQuery I want to use.
That is about as far as I have gotten on this.
Any help would be greatly appreciated!

Hi Cameron,
I do have access to InfoPath. How would I do it through there? If it's easy and already designed within the program, I would much rather do that!
As for the link you gave me - would you mind explaining it to me? I clicked on it and read the blog, but I'm confused on these things:
1) How do I use the code to apply to 4 different lists, each attached to it's own button?
2) I have the buttons already put on the page - how do I connect the code to said buttons?
3) How would I make sure that each pop up closed upon form submission?
I really appreciate your help! Thank you!

Don't see new Item on Purchasing

Hi my friends!
I have an error. I create new item on OPM inventory. But when i create a Purchase Order, I can't find it.
Can you help me?

Hi
Syncronize all OPM Items should assign to all OPM organizatios. You need to mainly assign it to all OPM Warehouses and Organizations in which the material is to be received. The above process is good for syncronization.
Now. why you cant see hte items still. Please cehck you purchasing setups to see if there is any problems
Also, in Discrete Item Master check if the flags of "Puchasable", "Inventory" etc.. are checked at both Master Org Level and Item Organization Level
Regards
Girish

Assign new default forms to list causes other content types forms to fail.

I have a list with multiple content types and I want to modify the forms. I've created new forms but when I assign them as default and go back to the new item menu, no matter which item I select I get the new default form. If I set the
NewForm.aspx back as default everything works.
How can I modify for one content type and ensure the forms are not affected?
By modify I mean I want to put a hyperlink on one of the forms but not the other.

Form libraries can be very painful if you can't foresee the direction that the form will be evolving over time. I've run into times when users have been using a form for months - years, and then a sudden change is needed (such as a change in calculations)
that they want to show ONLY in new forms, and the old calculations (for the same calculated fields) to show up in the old form, and you can't have 2 different versions of the same form working on a library unless you use content types.
You also, however, need to plan for columns and column types because of limitations around the number of Int columns or date/time columns, etc... that are allowed in a list. If you plan on using content types, I would say use a base content type (if
the content types will have the same fields) and then the fewer fields are different, the fewer columns are required on the library. In different content types, you can use different forms, and then you can make different calculations within the forms
for the same field (if that is ever a requirement).
Its best to plan this out ahead of time, because switching strategy after running for a while can create monstrous headaches.

Portel Server 6.1 & multiple organizations

In portal 6.0, I could define multiple organizations, and see those organizations as independant portals, with their own userbase.
That enabled us to create seperate workspaces for our portal developers, so that they could test against their own organization, without bothering the other developers too much.
Now we are looking into switching to portal 6.1 (perhaps 6.2 if it's released soon). Our first test included creating two organizations, and assigning a user "test" to both of them (so the same name and password).
When logging in to one of these organizations, the login fails because there are 2 users with the same name (although they are defined in different suborganizations).
Does this mean that it is no longer possible to create two organizations, which are identical, except for the name (e.g. "development" and "acceptationtest" organization) ??
Thanks.
Michel.

Hi.
You can create new servers in your domain via the console. Be sure they are
listening to different ports, however. If your NT machine supports more than
1 IP address then you could alternatively bind each server to a different
address.
I'm not sure if this answers your question?
Regards,
Michael
m holur wrote:
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
Madhu--
Developer Relations Engineer
BEA Support

Wanted a new item to be released for Blanket PO instead of old item

Hi All,
I have a requirement :
A new item (B) is replaced for an old Item (A), ie the purchasing flags are disabled for the old Item (A).
And the item releationships for the Old and New Item are defined in inventory.
There are few Open Blanket PO's where the old item is present in the Po's,now we wanted to release a PO for the new item instead of old item in the PO.
Client don't want to update the new item to the old item.
Please let us know how to use this functionlality.And the steps /setups to achive this.
Thanks
Sreekanth

Hi Sreekanth,
I guess your requirement is not achievable...
As long as the item is present in BPA then the same item will be defaulted in Release...we cannot use new item here even touch we have item relationship.
if you require a new release for the new item then you need to create a new BPA.
I guess Item releation ship wont work here.
I tried to work it out thru sourcing rules by creating a BPA with old item and putting new item in assign sourcing rule window....but while releasing thru autorelease old item got defaulted in the new release.
HTH
-Arif.

Automate Creation of new items in EBS

Hey everyone -
Just a question ,
we want to automate creation of new items in our system.
Our view is something like -
1. user GUI to request a new item, according to predefined templates.
2. Users fill a few fields of information.
3. Item manager gets notified and approves item is needed.
4. Automation to run batch and create everything relevant. (org assignment, item KFF, category assignments, BOMs etc). As much automation as possible, we can map template behaviour, variety is small.
I was wondering if there is any product supporting such behaviour.
I looked into Oracle's APC, and it seems like it doesnt do enough. Besides as far as I noticed it relies mostly on Item Catalog attributes which we don't. Also Im not sure if this product is "alive" coz oracle bought AGILE for PLM.
Does anyone know of a product that supports creation of new items and is flexible to fit our needs?
We want to make sure we're not missing something before we develop custom code for that.
Thanks,
Aaron

Hi,
This is prom PIM to Oracle
I have done an interface which creates an item in master and child .Which assighns category set on iots level controls .It inserts item into all active subinventories.
It notifies the end user with email any item already exits and error .
Regarding templates.
it assigs compatible templates at master and org leve.These are predefined and are not validated in program
Edited by: Sankuratri on Apr 5, 2009 10:02 PM

How to change the url of "Add New Item" of a particular list in SharePoint 2013???

Hi Guys,
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
I need to redirect it into the page where I have created my Visual web part.
Please suggest
Warm Regards,
Tony Joy

Hi,
There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

Creation of New Item Category

Hi All
Can anyone give an example of when a new item category creation will be required in practical ?
Anil

Hi Anil,
It is always recommended to use standard item categories. Create new item categories if the functionality you require cannot be covered by the standard item categories. Following are the attributes and functions of a BOM item category.
o   Is a material number required?
o   Is the item to be used in inventory management on a quantity basis
o   Is the item a text item only, with no other functionality?
o   Is the item to be used as a variable-size item with the option of entering individual sizes ?
o   Is the item a document item?
     The document item category allows you to enter a document which you created using the document management system.
o   Is the item a class item?
     For configurable material BOMs, you can enter a class in which materials or documents are classified. When you assign characteristic values during BOM configuration, the class node is replaced by the object with the required characteristic values. In this way, the workload involved in maintaining BOMs with many variants is reduced, because you no longer have to enter all items individually and assign selection conditions to them.
o   Are sub-items supported?
o   Is the item a plant maintenance structure elment?
     If the item is a PM structure element, the system does not check
If the requirement is to obtain the functionality by shuffling the above combinations, only than go ahead. 99 out of 100 times, the standard categories are suffiecient.
Reward if cleared and close the thread.
Keerthi

Assign new Item revisions to Multiple Organizations

Similar Messages

Maybe you are looking for