Assign variant class to service material for preconfigured service package

Hi,
Could somebody help with the steps on how to create a service material with variant. The requirement is to create a preconfigured service package.
I'm trying to create a service material and assign a variant class to it. Based on some examples in IDES, i see that in MRP 3 view there is a plant-specific configuration view which holds the variant check box and configurable material reference.
I'm unable to get that view while creating the material.
Regards
Rasheed

Hi Vishal,
From the PS perspective only one document type is allowed to be used for purchase requisitions. Therefore you can only maintain one in TA OPTT.
However, the SAP note no. 114213 gives an explanation of about how the document type is determined and shows where a modification to change this could be implemented.
Hope it helps.
Regards,
Rachel

Similar Messages

How to assign a class to the material through ABAP code

Hi,
I am working on a transaction in ABAP which takes material name, material description and a class from the user. Now, after this much input I create the material, its configuration profile through the ABAP code. For this I know I have to make relevant entries in tables MARA, MAKT, CUCO.. and also check for the existence of the class in the table KLAH.
Now the point where I am stuck is that I am not able to get how to assign the class to the material through the code. I am able to get the internal class id from the table KLAH but I am not able to figure how the internal material number is being generated in the table INOB and i need this number as well as the internal class id number to insert a record in the table KSSK to show proper assignment.
Can anyone please suggest me some solutions?
Thanks....

Hi,
I tried using BAPI_OBJCL_CREATE. In order to understand it functioning better I created a material and class (of type 300) through transactions MM01 and cl01 respectively. Then i created a report and called the FM BAPI_OBJCL_CREATE, gave the material name as the material above, table as MARA, class as the one i created above and class type 300. I even analysed the message of the table return (return-message) after executing the report. The messahe said assignment done. But when I checked mnaually in cl20n there was no assignment done to the required material. There was also no entry for the required material in the table INOB which I need.
Can anyoene tell me that where am i going wrong? Please do help.

Assigning valuation class when creating Material

Hi
I want assign "3100 -Trading Goods valuation class" to my material which i am creating. in Tr.code MMH1
In the accounting1 view, under the current valuation section, there are no options at all to select valuation class.
please help me figure out how to get the 3100 option into my valuation class.
i will send u a screen shot of my problem,if u need..gimme u r email id.
i will assign points
thanks

hi
u need to assign val classes to act cat ref.That act cat ref assign to mat type .
then syst automatically will give option of val class when ur creating mat of that mat type.
Log gen->mat master-> basic settings-> def att of mat type
here u assign act cat ref to mat type.
MM-> val & act assign ment -> act detr wth wizard-> def val class
here u assign val classes to act cat ref.
ok
if its ok
assign points
nani

Valuation class in service master linked with G/L accounts

Dear Experts,
In service master what is the significance of Service category & service group? Is it required to assign G/L account like material type is required in material master? Is it necessary to hv 1:1 relationship in valuation class & G/L account in service master? Is their any way that we can see the G/L account in service master? Pls help to clarify my doubts.
Regds
Prashant B.

Hi Manish
I assigned valuation class in service master and using same service master for service PO creation, but while doing GR system picks WRX account without valuation class but not the GL account assigned to the valuation class in service master?
I tried with assigning service group/ material group at PO item over view to same valution class in OMQW but still not able to post to separate GL account in OBYC. Is there anything missing?
As far as my understanding service PO WRX entries will be posted to the GL account witout valuation class.
Thanks

Material variant replacement in sales order for Configurable Material

HI
I am using variant configuration. In this i have created material A as configurable material and have Preconfigured Material B as its variant by assigning configurable material in MRP 3 view.
Now when i am creating Order for material A i.e. Configurable material and the characteristics values are same as that of Preconfigured material system is not replacing Configurable material with Preconfigured material.
Please help me out.
Regards,
Anand.

Even after maintaining the item category MTAC(Mills Make to order config at mat level), the configurable material is not getting replaced in the sales order (va02). It is just showing material variant exists for the configurable material.
The setting in item category for configuration is.
Config. Strategy 01(Sales Order Strategy (TAC, TAM))
Mat. Variant Action 4 (Replace configurable material (Append and change))
ATP material variant 2 (Do not substitute if not completely available)
Structure scope D (Configuration, poss. with BOM explosion)
I have maintained the stock for material variant as well to take care of ATP material varinat setting shown above.
Please suggest if missing something.

Variant config - Two Varinat class to single material

Hi
I had defined two variant classes eg: Class1 & class2 and assigned it to material in clasiification view.
While sales order the systems take me to variant config screen which shows charateristics of both the class combined. I need to display separately .
How can do this ? please help
regards
Arun prasad

Some light on Variant Configuration in Detail.
The procedure is as follows:
Create a Material - KMAT type with Item category (002)
Create Charateristics in CT04 - Zbike, where in values mention the Color of the bile like Red, Blue etc
Create another characteristics in CT04 - ZPrice, where directly go the additional data tab and maintain the table SDCOM and field VKOND (ABAP Dictionary it will ask for)
Assign these two characteristics to a Class in CL01 - ZBikeclass ( Type 300) in characteristics tab page.
Then go to CU41 Configuration profile select the material and enter the description click on the class assignment ie assign Zbikclass.
Now go back to CT04 - enter Zbike -go to values- select Red- go to extras - Other Dependencies - Select Procedure enter in front 10 write - $self.ZPrice='Red' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now select Blue- go to extras - Other Dependencies - Editor - Select Procedure enter in front of 10 write - $self.ZPrice='Blue' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now go to VK11 - Enter VA00 (Condition)(For Std RVA001 Pricing Procedure) - enter variant Red and Blue give the rates accordingly and create the sales order.
regards
Satish

Error message while creating configurable material for variant configuration.

Dear All,
I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
Regards
Akula Sivaji Kumar Madhu Kiran

If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
In MMNR, Click on the Edit Group.
Then select the material type and click select element.
Then mark a tick option in another group and then press Element/Group.
Then you can see the material type will come under this group.
Now save your entry, and create a material with this material type.

Creation of material for both service and delivery

Hai all,
we want to create a material for which both delivery and service is to be possible simultaneously.
Is it possible if yes let me know the material type for this.
Thanks in advance,
S.Jenibalet.

Hi,
You can create a new material type if you want to or use any of the exxisting material types that have qty and value updating set on.
This is because you simply have to use an account assignment category on the PO etc. to post the costs to a GL upon receipt. leave this at space (for the same material) and you will; bring it into stock and update the stock account.
So the main thing is the account assignment category and NOT the material type.
Steve B

How to find a KMAT material, for a given class (class type:300)

I know the class (class type:300), but I would like to know for which KMAT material is this class is being used. Is there a transaction or table for which I can find

Hi
Try the tables KSSK,KLAH. Pass the class value as 300 you wil get all the materials which are assigned to class type 300. you can pass the material to MARA to and filter with material type KMAT.
Regards
S.Senthil

Material assigned to Class

Hi Experts,
Can someone tell me step by step procedure to assign class to any material. Please give T-Code also.
Full Points, if helped.
GR

create a class in CL02 it is a master data. the class is nothing but the group of characteristics.
theen go to MM01 and select classification view and maintain the class there.
since this is at client level this will be constant for all plants
reward if useful
sk

How to assign a class for different colored links

Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying to
get links to be different colors within the same page. I have a
navbar with a CSS style that I've assigned colors to all my links
there. They work. But if I attempt to change the links in the main
content it screws up the navbar links.
So, now, I'm trying to assign the different colors to the
links in the main content. I have the link color down but I can't
seem to get the visited, hover, active to work.
So, I read somewhere you have to assign a class to be able to
have different colors for your links on the same page. There is a
class assigned to the links I want to change but it only assigns
the link color, not the visit,hover,active colors. I don't know
where I am supposed to put the code so that only the main content
links are changed. Here is what I came up with from reading and
studying. Can somebody tell me what's wrong with it and where I am
supposed to put what in each page? This is just a CSS style page I
made and I have no idea if I even did that right. Then, I can't
figure out how to tell each page to include it for that class only.
Thanks.
@charset "utf-8";
/* CSS Document */
<class="style49"
<style type="text/css">
a:link {color: #3333FF}
a:visited {color: #009900}
a:hover {color: #6600CC}
a:active {color: #FF0000}
</style> </class>

Pseudo-classes and container styles are what you need - here
are some
tutorials.
http://www.thepattysite.com/linkstyles1.cfm
http://www.projectseven.com/tutorials/pseudoclasses/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Newbie744" <[email protected]> wrote in
message
news:fn3***$m6q$[email protected]..
> Hi. I'm new to CSS and HTML and Dreamweaver. I'm trying
to get links to
> be
> different colors within the same page. I have a navbar
with a CSS style
> that
> I've assigned colors to all my links there. They work.
But if I attempt
> to
> change the links in the main content it screws up the
navbar links.
>
> So, now, I'm trying to assign the different colors to
the links in the
> main
> content. I have the link color down but I can't seem to
get the visited,
> hover,
> active to work.
>
> So, I read somewhere you have to assign a class to be
able to have
> different
> colors for your links on the same page. There is a class
assigned to the
> links
> I want to change but it only assigns the link color, not
the
> visit,hover,active
> colors. I don't know where I am supposed to put the code
so that only
> the
> main content links are changed. Here is what I came up
with from reading
> and
> studying. Can somebody tell me what's wrong with it and
where I am
> supposed to
> put what in each page? This is just a CSS style page I
made and I have no
> idea
> if I even did that right. Then, I can't figure out how
to tell each page
> to
> include it for that class only.
>
> Thanks.
>
> @charset "utf-8";
> /* CSS Document */
> <class="style49"
> <style type="text/css">
> a:link {color: #3333FF}
> a:visited {color: #009900}
> a:hover {color: #6600CC}
> a:active {color: #FF0000}
> </style> </class>
>
>
>

Policy map/ class map/ service policy for IOS xr

Hi,
I need to create a policy map and class map/service policy to limit the amount of bandwidth that can be used on one interface both in and out.
I need the cap for the bandwidth to traverse this circuit to ne 10 Meg.
the IOS xr version we are using is 4.3.4
I was hoping someone could help me out by giving me a configuration example I could follow.
Thank you.

for instance like this:
policy-map police-in
class class-default
police rate 10 mpbs <optionally set burst>
policy-map shape-out-parent
class class-default
shape 10 mpbs <optional burst config>
service-policy shape-out-child
policy-map shape-out-child
class class-default
queue-limit 10 packets
int g 0/0/0/0
service-policy police-in in
service-policy shape-out-parent out
also have a look at CL 2013/2014 (orlando/sanfran) ID 2904 for more QOS details
and the support forum article of "asr9000 quality of service architecture"
xander

Object Class and Object Id for material Determination tables.

I want to know what is the Object Class and Object Id for material Determination records to verify tables CDHDR and CDPOS.
The purpose is to know the changes done by the different users for material determination records.
Can any one help.

Hi ZZZSUNNY,
Similar question is answered recently.Please find the below link which will helps you
Material determination: how to see the creater of a record?
Thanks
Dasaradha

FM/BAPI for assigning a class and value instead of manualy doing in IE02

hi guys,
i need a FM/BAPI which will allow me to take input as equipment number and assign the class and value for it as done manually in IE02.
Input should be equipment number.
POINTS will be given.

Hi
I hope this thread can help you
Characteristic Value
Re: Equipment Characteristic Value
Change Equipment Using Transaction IE02
Regards
pavan

No external no.assignment possible for material for material type HALB??

no external no.assignment possible for material for material type HALB??... message no:m3317
i got this error msg while i try to create external material via mm01
material: pump
industry type: mechanical engineering
material type: semi finished product
after pressing enter error came...

Hi
If you created number range already, then you need to remove the number range and recreate the same with external number range w/o check
Try it out.
Thanks
Raman

Assign variant class to service material for preconfigured service package

Similar Messages

Maybe you are looking for