Assignments for requisition screen

I am doing e-recruitment configuration. I have following doubts. Can you help me. I read the SAP help but it is not clear.
-- Questionnaire Ranking -- How do you configure this
-- In the Assignments Requisition screen, there is a column called Match. How is this configured. The reason is, if the candidate does not complete a questionnaire (red traffic light), the column show Five stars. I do not understand.

Hi Nicole,
Only a couple employees were affected.  I agree about the search profile, but I know that my search profile fields are fine.  What I found was that some employees who had never logged into the system (so who had never accepted the data privacy statement) were added to a requisition by a recruiter.  There were a number of candidates in this scenario.  In some cases, once added, their name would not appear on the 'Assignments for Requisition' screen.  A blank line would appear in its place though.  And if you clicked on the affected line and clicked the 'Activities' button, the subsequent window did contain their name.  So something was preventing their name from being displayed only on the 'Assignments for Requisition' screen.
I have a feeling it could be authorizations-related, based on the user that triggered the creation of the candidate object, but I am not certain about this yet.
If anyone has ever seen this, your feedback is much appreciated.
Shane

Similar Messages

  • Multiple Account Assignments for purchase/framework requisition

    Hi,
    Multiple Account Assignments for purchase/framework requisition:
    The actual MM configuration is a single account assignment in the purchase requisition (although the option of multiple account assignments exist for trips). What are the implications at GR posting? Assuming that we could use the option for quantity and percentage distribution.
    Regards
    Suresh

    Hi
    Multiple account assignment:
    <b>Specifying Multiple Account Assignment</b>
    This procedure allows you to apportion the costs associated with a PR/PO item (among several cost centers, for example).
    With multiple account assignment, the account assignment data entered takes the form of individual account assignment items.
    <b>Prerequisites</b>
    When specifying multiple account assignment for an item, you must consider the following points:
    1.How is the net value of a PO item to be distributed (apportioned) among the individual account assignment items?
    The costs can be allocated on a quantity or percentage basis (for example, 10 pieces or 10% of the order value to cost center 100).
    2.How are the costs to be apportioned if only a part of the ordered quantity has been delivered and invoiced?
    The partial invoice amount can be distributed proportionally, i.e. evenly, among the account assignment items of a purchase order.
    The partial invoice amount can be distributed on a "progressive fill-up" basis, i.e. the invoiced amount is allocated to the individual account assignment items one after the other. Only when account assignment item 1 has been charged in full is item 2 charged; only when account assignment item 2 has been charged is item 3 charged, and so on. This process continues until the total invoice value of the PO item is reached.
    <b>Procedure</b>
    1.When entering an item, specify the account assignment category for the desired item on the item overview screen.
    2.Choose Item -> Account assignments.
    The account assignment window appears.
    3.Enter the account assignment data for the first account assignment item.
    Choose Change display to call up the multiple account assignment screen.
    4.In the item fields (upper part of this screen) enter the relevant data:
    – Select the GR non-val. field to designate the GR for this item as non-valuated (as the item has been ordered for direct consumption).
    – In the Distribution field, specify whether the costs are to be apportioned on a quantity basis or by percentage.
    – In the Partial invoice field, specify whether the value of a partial invoice is to be allocated to individual account assignment items successively, whereby one is debited in full before a posting is made to another one (in which case, some account assignment items may not be debited at all as a result of a particular invoice), or whether the value of such a partial invoice is to be distributed among all account assignment items in equal portions.
    5.For each account assignment item, enter either the quantity or the percentage of the total value to be charged to the relevant account assignment item.
    To enter further items with the same account assignment data, choose Edit -> Repeat account assignment -> Switch on. The account assignment data will then be automatically adopted in the next item.
    6.Repeat as necessary for other items.
    7.Save the purchase order.
    A vendor submits an invoice for 60% of the total order value. The cost of the ordered goods is to be divided equally among cost centers 1 - 5 (that is, 20% of the total cost is to be borne by each).
    If you specified for the PO item that the value of a partial invoice is to be debited to the individual account assignment items on a "progressive fill-up" basis, cost centers 1 to 3 will each be debited with their full 20% share of the total cost on the basis of this partial invoice, whereas cost centers 4 and 5 will not be charged at all. (The latter two cost centers will not be debited until the remaining amount is invoiced.)
    Regards
    Ramakrishna

  • Someone has a tutorial for creating screen exit?

    I have a development and I do not know how to create screen exit.
    Case Someone has a tutorial for creating screen exit please help me
    Thank you
    <b><i>Wagner Duarte
    Consultant - SAP ABAP</i></b>

    hI
    Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
    1. Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    Have a look at below link It will definately help you to undestand the same.
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    check these links.
    http://help.sap.com/saphelp_46c/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
    http://www.allsaplinks.com/screen_exit.html
    USER EXITS
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=312792
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=1320078
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=2669896
    How to implement screen exit for a SAP standard transaction
    Introduction
    SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
    To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
    To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
    An append structure in the database table with the new fields.
    A subscreen area into the standard screen – where the programmer can attach his subscreen of his own program with the new fields.
    A function group under which the new subscreen has to be created with the new fields.
    Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen – so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
    Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
    Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
    Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
    Pre-Requisites
    The developer to work on screen exit should have essential knowledge on the following:
    DDIC concepts, including the knowledge of append structure.
    Concept of SAP Enhancements and implementing them using Projects.
    Concept of function exits.
    Knowledge on Module Pool – including subscreens, Tabstrip controls etc.
    Steps
    Guidelines
    So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
    Find out the Required Enhancements
    Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton ‘SAP Applications’. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest – for e.g., Purchasing, Asset Accounting, etc.
    Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
    Utilize the Enhancement in a Project
    After you have found one, do as directed in the documentation. Generally, the steps are as follows:
    Create a project using CMOD including your enhancement.
    Create the append structure with new fields.
    Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
    Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
    Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
    Activate the project.
    Test to ensure that required functionality are met.
    Case Study 1
    Add three new custom fields for Asset master and maintain information for them
    Requirement
    Three fields in the legacy system have to be maintained in Asset master. These fields are:
    Original Asset number – 20 characters
    Location 2 – 15 Characters.
    Model no – 20 characters
    Location 2 should start with ‘L’.
    Pre-Analysis
    Finding out the Enhancement
    As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
    Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
    Studying the Function Exits
    The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
    EXIT_SAPLAIST_002
    Function module Level Documentation
    This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
    Import Parameters
    Understanding
    This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
    EXIT_SAPLAIST_003
    Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
    Understanding
    This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
    Studying the Documentation of the Enhancement
    The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
    Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
    Deciding the Final course of Action
    After making all the investigations, the final course of action was determined.
    SrlNo Step Justification
    A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
    Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
    A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be ‘CUST’ (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
    In the PAI of the subscreen, validation for Location to start with ‘L’ will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_002’, the following code will be written:-
    ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
    In the custom include of the function exit module ‘EXIT_SAPLAIST_003’, the following code will be written:-
    E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
    Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done – otherwise, the new custom subscreen will not be displayed in the Asset master screens.
    Development
    Creating a Project to include the enhancement
    Go to transaction CMOD and create a project.
    Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.
    Enter the name of the enhancement and Save.
    Go to ‘Components’.
    Creating Custom Include for ANLU
    The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
    Create the include structure with three new fields, as required. Then, save and activate it.
    Develop the subscreen and the program
    Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
    Create it as subscreen.
    Then, go to the Layout of the screen and create three new fields from Database table ANLU.
    Drag the fields in the screen body and place them.
    Then, save and activate the screen and come back to screen flow editor.
    Create the PAI module to add validation for field “Location 2”, as required .
    Activate the whole function group and come out.
    Write code in the Function Exits to synchronize the programs
    Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
    Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
    Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
    Then, activate everything – the whole project and come out.
    Complete the configuration to link the subscreen
    The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
    Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
    Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).
    Determine the Layout
    To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.
    Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
    Create new tab layout
    Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.
    System will copy all the settings and will inform you about that.
    Select your newly created layout and double-click on the folder ‘Tab page titles’.
    You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".
    Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.
    Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.
    Then, save and come out.
    Assign the new Layout to Asset Class
    Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
    Save and come out.
    Test the Exit
    Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
    Original Source: ittoolbox.com
    Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
    1. Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    and you just go through these links also
    Screen exit
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    screen-exits
    Check the following link.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=how%20to%20find%20screen%20exits&cat=sdn_all

  • Workflow error from purchase requisition screen

    How can I check workflow error / status / information from purchase requisition screen. Is there any other transaction ?

    Goto SWI6 or SWI14 and enter the object type (standard is BUS2105 for PR) but in your organization if custom Object type used then enter that and execute you will see the list here
    enter the selection period

  • Exit for Modifying screen attributes during ME22N

    Hi Experts,
    I need to make some fields output only at item level in transaction ME22N i.e. during PO change. Is there any exit or BADI available for that.
    Regards

    > Hi Experts,
    >
    > I need to make some fields output only at item level
    > in transaction ME22N i.e. during PO change. Is there
    > any exit or BADI available for that.
    >
    > Regards
    This is mainly config.
    Check in SPRO - IMG
    Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level 
    Also these BAdis are available:
    ME_PROCESS_PO_CUST - For Custom logic in Enjoy transactions
    ME_GUI_PO_CUST - For Additional Custom screens in ME2xn
    Read the documentation, it will help.
    Also, read the config section about enhancements in Purchasing using old enhancement technology. See below.
    OSS is also a good place for documentation. OSS 496083.
    Good luck!
    Leonardo De Araujo
    Develop Enhancements for Purchasing
         In this step, you develop enhancements for Purchasing.
         The following SAP enhancements are available for the Purchasing area:
         o   AMPL0001
             User subscreen for additional AMPL data (Manufacturer part number)
         o   LMELA002
             Adoption of batch number from shipping notification at time of
             posting of a goods receipt
         o   LMELA010
             Incoming shipping notification: adoption of item data from IDoc
         o   LMEQR001
             User exit for source determination
         o   M06B0001
             Role determination for release of requisitions
         o   M06B0001
             Changes to communication structure for release of requisitions
         o   M06B0003
             Number range and document number
         o   M06B0004
             Number range and document number
         o   M06B0005
             Changes to communication structure for overall release of purchase
             requisitions
         o   M06E0004
             Changes to communication structure for release of purchasing
             document
         o   M06E0005
             Role determination for release of purchasing documents
         o   ME590001
             Grouping of requisitions for PO split in transaction ME59
         o   MEETA001
             Determination of schedule line type (backlog, immediate requirement,
             forecast)
         o   MEFLD004
             Determination of earliest delivery date for checking at time of
             goods receipt (PO only)
         o   MELAB001
             Generation of forecast delivery schedule: realization via creation
             profile
         o   MEQUERY1
             Enhancement for document overview ME21N / ME51N
         o   MEVME001
             Calculation of default GR quantity and over/underdelivery tolerances
         o   MM06E001
             User exits for inbound EDI messages and outbound purchasing
             documents
         o   MM06E003
             Number range and document number
         o   MM06E004
             Control of import data screens in purchase orders
         o   MM06E005
             Customer fields in purchasing documents
         o   MEREQ001
             Customer's own data in purhcase requisitions
         o   MM06E007
             Change document for requisitions when converting into POs
         o   MM06E008
             Monitoring of contract target value in case of release orders
         o   MM06E009
             Relevant texts for "Texts exist" indicator
         o   MM06E010
             Field selection for vendor address
         o   MM06E011
             Activation of requisition block
         o   MM06L001
             Exits for determination of ratings in vendor evaluation
         o   MMAL0001
             ALE source list distribution: outbound processing
         o   MMAL0002
             ALE source list distribution: inbound processing
         o   MMAL0003
             ALE purchasing info record distribution: outbound processing
         o   MMAL0004
             ALE purchasing info record distribution: inbound processing
         o   MMDA0001
             Default values for delivery addresses
         o   MMFAB001
             User exit for generation of releases
         o   MRFLB001
             Control items during release creation
         o   LWBON001
             Enhancement of LIS update through extension of the communication
             structure MCKONA (business volumes and rebate income)
         o   LWBON003
             Change settlement data for end-of-period rebate settlement before
             creation of settlement documents
         o   LWSUS001
             Customer-specific source determination in Retail
         Activities
         1.  Either create a new project or use an existing one and then enter
             the enhancement.
         2.  Activate the project
             Your enhancement will only become effective after activation.
         Further notes
         In contrast to modifications, enhancements are basically
         release-insensitive since they are not implemented in the SAP original
         but in a name range that is reserved for the customer.
         The general procedure for creating enhancements can be found in the
         enhancement transaction at Help -> Application help.
         If you want to display the documentation for an enhancement, choose Goto
         -> Documentation in the enhancement transaction.
    Return ->
         Application

  • How to find screen exit for a screen?

    Hi,
    If you know the transaction, how to find if there is a screen exit exists or not?
    Here even I know the screen number also. I have opened it in screen painter. How can I see if there is a screen exit for the screen?
    Thank you.

    Hii
    Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
    1. Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    Screen exit
    Regards
    Naresh

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • How to use the different class for each screen as well as function.

    Hi Experts,
    How to use the different class for each screen as well as function.
    With BestRegards,
    M.Thippa Reddy.

    Hi ThippaReddy,
    see this sample code
    Public Class ClsMenInBlack
    #Region "Declarations"
        'Class objects
        'UI and Di objects
        Dim objForm As SAPbouiCOM.Form
        'Variables
        Dim strQuery As String
    #End Region
    #Region "Methods"
        Private Function GeRate() As Double
                Return Double
        End Function
    #End Region
    Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
            If pVal.BeforeAction = True Then
                If pVal.MenuUID = "ENV_Menu_MIB" Then
                End If
            Else ' Before Action False
                End If
        End Sub
    #End Region
    End Class
    End Class
    Rgds
    Micheal
    Vasu Anna Regional Feeling a???? Just Kidding
    Edited by: micheal willis on Jul 27, 2009 5:49 PM
    Edited by: micheal willis on Jul 27, 2009 5:50 PM

  • How can i set a layout for MIGO screen

    Hello all,
    How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

    Hi
    First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
    Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
    After creating the variant tick the check box use as standard setting below the variant
    Hope it helps
    Edited by: Girish  Adaviswamy on Mar 3, 2010 1:27 PM

  • How to create a variant for a screen (not a selection screen)

    Hi
    I foud a function module RS_CREATE_VARIANT.
    Is this the correct fm for creating screen variant, if yes then pls provide me some help about how to pass values to this fm.
    if not then pls help me to find out new one.
    thnks
    satisfactory answer will be definitely rewarded.
    S@meer

    passing values to RS_CREATE_VARIANT.
    data : LS_VARIANTDESC TYPE VARID.
      DATA : LT_VARIANTTEXT TYPE TABLE OF VARIT ,
             WA_VARIANTTEXT TYPE VARIT.
      DATA : TT_REPORTPARAM TYPE TABLE OF  RSPARAMS,
             WA_REPORTPARAM TYPE RSPARAMS.
    CLEAR LS_VARIANTDESC.
              LS_VARIANTDESC-MANDT   = SY-MANDT.                " gr 46A
              LS_VARIANTDESC-REPORT  = 'ZXXXXX'.
              LS_VARIANTDESC-VARIANT = 'VARIANT'.
              LS_VARIANTDESC-EDAT    = SY-DATUM.
              LS_VARIANTDESC-ETIME   = SY-UZEIT.
              REFRESH LT_VARIANTTEXT.
              CLEAR WA_VARIANTTEXT.
              WA_VARIANTTEXT-MANDT    = SY-MANDT.               " gr 46A
              WA_VARIANTTEXT-LANGU    = SY-LANGU.
              WA_VARIANTTEXT-REPORT   = 'ZXXXXXX'.
              WA_VARIANTTEXT-VARIANT  = 'VARIANT'.
              APPEND WA_VARIANTTEXT TO LT_VARIANTTEXT.
           CALL FUNCTION 'RS_CREATE_VARIANT'
                  EXPORTING
                    CURR_REPORT               = 'ZXXXXX'
                    CURR_VARIANT              = 'VARIANT'
                    VARI_DESC                 = LS_VARIANTDESC
                  TABLES
                    VARI_CONTENTS             = TT_REPORTPARAM
                    VARI_TEXT                 = LT_VARIANTTEXT
                  EXCEPTIONS
                    ILLEGAL_REPORT_OR_VARIANT = 1
                    ILLEGAL_VARIANTNAME       = 2
                    NOT_AUTHORIZED            = 3
                    NOT_EXECUTED              = 4
                    REPORT_NOT_EXISTENT       = 5
                    REPORT_NOT_SUPPLIED       = 6
                    VARIANT_EXISTS            = 7
                    VARIANT_LOCKED            = 8
                    OTHERS                    = 9.
                IF SY-SUBRC EQ 7.
    If variant with same name already exists, change variant
                  CALL FUNCTION 'RS_CHANGE_CREATED_VARIANT'
                    EXPORTING
                      CURR_REPORT               = 'ZXXXXX'
                      CURR_VARIANT              = 'VARIANT'
                      VARI_DESC                 = LS_VARIANTDESC
                    TABLES
                      VARI_CONTENTS             = TT_REPORTPARAM
                    EXCEPTIONS
                      ILLEGAL_REPORT_OR_VARIANT = 1
                      ILLEGAL_VARIANTNAME       = 2
                      NOT_AUTHORIZED            = 3
                      NOT_EXECUTED              = 4
                      REPORT_NOT_EXISTENT       = 5
                      REPORT_NOT_SUPPLIED       = 6
                      VARIANT_DOESNT_EXIST      = 7
                      VARIANT_LOCKED            = 8
                      SELECTIONS_NO_MATCH       = 9
                      OTHERS                    = 10.
                ELSEIF SY-SUBRC NE 0.
                MESSAGE WITH 'Cannot create/change variant for'
                SY-UNAME.
                ENDIF.

  • How can I assign a period (instead of B) in Keynote for blank screen so I can use a Logitech R800 presenter? An option in next version?

    I have recently bought a Logitech R800 presenter which works very well with Keynote on a MacBook Pro. The start/stop presentation key does not work but that can be easily fixed by assigning F5 to "Start presentation" for Keynote in the keyboard system preferences. The remaining issue is that the blank screen button sends a period (".") which works as a prompt for a blank screen in PowerPoint, but in Keynote it causes the slideshow to end. Keynote uses the letter "B" for blank screen.
    How can I assign a period (instead of B) in Keynote for blank screen? Some sort of work around would be very useful as I often use blank screen in my presentations and much prefer Keynote to PowerPoint.
    Perhaps it will be an option in next version of Keynote?
    Thanks

    As far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
    Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them.

  • Can't use external monitor as default monitor for full-screen settings

    Hey guys,
    I have been trying to get quicktime to let me use my external monitor as the full-screen monitor. Every time I go into full-screen, it reverts back to my MBP screen.
    I cannot seem to find this option even in the fullscreen preferences. Rather than having an option I can click on (like I've seen in pictures), it just says "Movie Size." I have Quicktime Pro 7.5.5 and I am running Leopard.
    Any ideas? I can play most of my movies on VLC, but since I paid for Pro it would be nice if I can get it to work on my external monitor.

    I have to say, I am in exactly the same place ppshr150 is. I have checked both Quicktime and Quicktime Player preferences and the option to choose a default screen for full-screen presentation of movies does not exist.
    I can drag movies over to the second monitor and then press Command F and they will play there but from a presentation perspective, this is rather unprofessional.
    It surprises me that Apple does not have this option. Or is it a bug they haven't/won't fix?

  • I recently downloaded a 10.6.8 update and a game program has now been reduced in size.  It's specifications are set for full screen, but it is about 1/4 of the size.  Any ideas how to fix?

    I recently downloaded a 10.6.8 update and a game program has now been reduced in size.  It's specifications are set for full screen, but it is about 1/4 of the size.  Any ideas how to fix?

    Hi, I have got the same problem but all is 1/4 the size have you fixed it?

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Thanks Tim,
    I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
    At the moment the most recurrent problem is this:
    http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
    which has been longly speculated here:
    http://forum.thinkpads.com/viewtopic.php?t=47755
    My other angst is the boot-time chkdsk hang-up problem:
    http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
    I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
    This is my T61p configuration:
    Intel Core 2 Duo T7700 2.4GHz
    BIOS version 1.26-1.06
    4GB RAM 2 SO-DIMMs
    nVidia Quadro FX 570m with 512MB VRAM
    WUXGA LCD
    Seagate 7200.2 160 GB
    4GB RAM 2 SO-DIMMs
    Windows Vista Ultimate 32bit (waiting to move to 64bit)
    thanks,
    andrea
    Message Edited by abarbieri on 12-05-2007 03:48 PM
    T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
    T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

Maybe you are looking for