Asssociating new Network to a ProjectDefinition

Hi,
I am creating a new Network using 'BAPI_NETWORK_MAINTAIN' by using SE37 transaction.
I am passing 'CREATE' and then 'SAVE' as Method parameter value in I_METHOD_PROJECT structure.
I want to associate this network with some existing ProjectDefinition, but I am not able to find any way to associate the Network with any of ProjectDefinition.
How can I achieve this?
Thanks for suggestions.
Regards,
Vikas Khandpur

Hi Mark,
In the Airport menu choose Create Network.
Next, read iFelix's guide for sharing files with PCs.
http://www.ifelix.co.uk/tech/3020.html
John

Similar Messages

  • HP deskjet 3050 all-in-one J610 series printer won't recognize new network

    I have recently changed internet provider and my network setting have changed.  My printer is not recognizing my new network - help

    Well what exactly changed?  New equipment?  New router?  New Gateway?  New modem?  Wired or wireless connection?  OS of computer?  Reinstalled the software?  Reinstalled the drivers?  Detail everything in order on what you are trying to do and where in the manual what steps you are following.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • TS4611 Guys if you have these build: 12E3200 and your wifi is dropping, is not the your mid 2013 macbook air, is your router, I solve it by setting up my time capsule as a new network problem solved

    Here is what I have been doing:
    I got my new macbook air 11" two weeks ago, and have been haven problems with wifi connection dropping, I'm using verizon fioz at home, and their router
    I also have a time capsule not set up as a network just join it to my current one.
    After looking online all these days, I though, maybe is the verizon device that is updated..
    I then reset the time capsule, created a new network
    connected my system to the time capsule network, and there it is
    DONE, everything works now.
    So if you are haven the same problem,, that is the fix
    hope that helps.
    Oh  before I did these I try everything, the wifi update from apple don't work it keeps dropping it
    I try everything, so don't and delete the system as some people have done, I read somewhere.
    try my fix hopes that works.
    Message was edited by: rawreviewer

    I have seen lots of issues on Yosemite with Wifi (and have been having issues myself), but yours seem different. It is a pretty new computer, have you tried taking it in under Applecare (if you live somewhere this is convenient)? Maybe you just got a defective wifi card.  I won't defend Apple over this wifi mess, because it really is terrible, but your issue seems not the same as the ones I've read about while researching how to fix mine (unsucessfully....).

  • Thunderbolt to Firewire Adapter & New Network Interface Message

    I am using the new Thunderbolt to Firewire Adapter. Why is it that every time I use it, I get the following message:
    "A new network interface has been detected. The Thunderbolt FireWire Slot 2 network interface has not been set up. To set up this interface, use network preferences."
    All I want to do is mount external hard drives that don't have Thunderbolt ports to my iMac, via Thunderbolt because I am using the iMac's single Firewire port for something else. The drives do successfully mount, but why do I keep getting this message whenever I connect them again?

    I have no doubt what you say to do would get rid of the message for me. However, both myself and an Apple Store employee think it is odd that the message comes up in the first place. We're both curious about it, and he's going to look into it.
    We tested it on a computer at the store, and found that it happens on Lion too.

  • I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this?

    I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this? I cannot find anything in the user manual.

    The TC is very hard to just move.. it retains too much of the old network setup.. buried deep in the bowels of the firmware configuration files.. or even on the hard disk special partitions used by the TC.. invisible to you btw.. !!
    Do a factory reset and setup from scratch.
    That factory reset will have no affect on your backups.. even if you rename the TC.. not a bad things since you also want clients to respond to the new network.. simply reset TM to the new TC name and location.
    See A4 here.
    http://pondini.org/TM/Troubleshooting.html
    Factory reset.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

  • How can I set up a new network on my apple tv when my remote app isn't picking it up because they aren't on the same network?

    How can I set up a new network on my apple tv when my remote app isn't picking it up because they aren't on the same network? The actual remote doesn't work anymore, so I've been using the remote app on my phone but now that our internet changed, I can't do anything at all. Please help!

    You can't use the remote app to setup a network. If your physical remote isn't working you will need borrow another or purchase a replacement.

  • I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

    I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

    Extending using a wireless connection always results in a performance compromise.
    If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
    Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
    If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
    Post back to let us know which way to you want to go.

  • How can I change the "Ask to join new networks" option using a terminal command?

    We are currently switching to a new wireless network throughout our school district and I have pushed commands to connect to the new and remove the old. However, any Macs that have "Ask to join new networks" enabled are jumping over to our unsecure guest network, even if that network has been removed from the list of Preferred Networks. So far the fix has been to remove the guest network from the list of Preferred Networks and then disable Ask to join. The only issue I'm running into now is I have been unable to find a terminal command to change this setting. Once I have the command I can write a script and send that out to all of the Macs.
    So is there a way to disable "Ask to join new networks" using command line?

    sed -i "" 's/Prompt/DoNothing/' /Library/Preferences/SystemConfiguration/preferences.plist

  • Configuring the HP PSC 2510 on a new network

    I'm posting at the end of a long weekend setting up my psc 2510 on a new wireless network. I'm pretty much done, and I'm posting to share what I've learned with others in the hope of saving them trouble. I'm beyond my warranty period, so my advice is based on a few hints from phone tech support and a lot of work by trial and error.
    I have four machines total, two of them running OS X 10.4, the others running 10.3.9.
    1. Start by hooking the printer up to a wired (ethernet) network. Print out a network config page (setup, 6, 1) when the printer shows its blue "networked" light. Dial the printer's URL into your web browser and enter the new network's info into the printer's embedded web server. If you get everything right, when you turn off the printer, disconnect the ethernet cable, and turn on the printer, you'll get that blue "networked" light after a minute or so.
    If you don't see the light, print out another config page and check the "Wireless Status": "Scanning" means that the printer's having trouble connecting to the network. Your best bet is to temporarily turn off all wireless encryption/security and reconfigure the printer's connection. Once you have a connection, then try adding various sorts of security/encryption. In my experience, the printer doesn't do well if the SSID of the network isn't being broadcast or with a list of acceptable MAC addresses. In my old network I managed to get the printer running with WPA security, but this time I had to settle for WEP 128 bit security.
    The Wireless Status will read "Disabled" if the printer has a USB cable or Ethernet cable attached. This means you need to unplug all cables (and possibly turn the printer off and on) to enable the wireless card. If the Wireless Status is "Disabled" even though you have no cables attached, you have probably reset the printer to factory defaults (see #2 below).
    Things to watch for: is the default gateway of the printer the same as that of your new network? I had to change my new network's gateway to "192.168.1.1 addressing" from "10.0.1.1 addressing" because the printer was expecting "192 etc." after being hooked up to a Linksys router for several years.
    Also, you may find you need to give the printer a self-assigned (manual) IP address, if other computers, once linked to the printer, lose printing and/or scanning capabilities a few days or weeks later. This can be set in the printer's web access server, but make sure to assign the printer an IP address that's compatible with the range of IPs that your router's is leasing to the network. I'm a novice at this network stuff, so sorry if I'm being vauge on this point.
    2. It's possible I could have saved myself a lot of trouble setting up the printer for the network if I had reset the printer's network settings to factory defaults right at the start. But if you decide to follow HP's instructions and reset network settings to factory defaults, BEWARE: the printer's embedded web server can't for some reason configure the printer to re-enable wireless networking. And the latest download of the hp all-in-one installer doesn't contain the network config utility found on the original HP installation CD. (On this old CD, the config utility isn't part of the install package, but it is invoked automatically during the installation process.)
    SOLUTION: Run the PSC 2500 Series installer found on the HP CD, preferably from a Mac running an system older than Tiger. It might also be possible to avoid running the installer and just run the config utility.
    From this point on, I'll assume you've managed to get the printer on your network. Here's how to get all your computers configured to use the psc's printer and scanner functions.
    HP tech support advised me to download the latest installer/print driver and use that to install and configure the psc 2150. This is good advice, insofar as the old HP Director software has a memory leak and the old HP Scan was prone to crashing whenever the 2510 went into Energy Saving mode. But if your mac isn't running OX X 10.4 (Tiger), you'll find that your system doesn't seem to recognize the new print drivers installed with by the download. This is especially a problem if you follow HP tech support's advice and delete a bunch of files prior to upgrading from the old installer to the new one, as (I suspect) it was at this point that I deleted working printer drivers from my Macs running Mac OS 10.3.9.
    So if you're running 10.3.9 or earlier, I advise you not to delete any files and to configure your computer for the print and scanner functions in the opposite order that HP advises.
    Most important: through trial and error I discovered that the HP Setup application isn't able to configure the printer if more than one user is logged in (Fast User Switching!). (This is a particularly tricky error to diagnose as the only symptom is that the setup app keeps claiming that it "can't find device" even though in the stage just prior it had successfully detected it!) Log out all other users, then proceed with the following steps:
    1. Go to Print Center (called Print Setup Utility in Tiger), delete your old psc printer (if any) and click "add printer". The psc should show up in HP IP printing or under Rendezvous (called Bonjour in Tiger), and when you click on it, the Add Printer utilty should automatically find the "HP All-in-one" printer driver. If something's gone wrong, though, you may get the message "Print Driver not installed". That's what happened to me after I deleted files (see above).
    SOLUTION: Run the PSC 2500 Series installer found on your original HP CD. When it finishes, it will start the HP setup assistant, in the course of which you'll be directed to go to the Print Center and add your printer. Do so.
    2. Once you've added the printer successfully, run the latest HP installer, a download from the HP website. You should be able to skip the step where it asks you to add the printer, as you did this in step one.
    3. Finally, since you didn't delete any files earlier, be sure to remove HP Director from your dock and from your Startup items (Login items in Tiger) by opening Mac System Prefs - Accounts - Startup/Login Items. HP Director has a memory leak. And it is superceded by the newer HP Device Manager when you download and run the latest HP installer. You should find the new HP Device Manager in your dock after step 2 (above).
    If you have questions, write me at the following email (account name reversed to foil spam bots):
    [email protected]
    Powerbook 17"   Mac OS X (10.4.3)   Airport Express base station

    Hello dgt228, welcome.
    I am not sure why you are choosing EAP.  If you have set your router to use WPA, you should just set your printer to enable WPA. Is your wireless light illuminated on the front of your printer?  Run a Wireless Network Test from the front of the printer to self-test the radio. If you can connect this printer with Ethernet to your router its connection will be more secure and more reliable.

  • Wifi suddenly not working with new networks?

    This is already my second iPhone 5, since the last went into warranty because, ironically, of a wifi problem.
    The other day, I was just minding my own business when I decided to try to connect to the local wifi of the place I was at the time, and it wouldn't connect. It would find the network, I would put the given password in and it just stayed there. The keyboard would disappear, like it normally would, but instead of returning to the wifi menu in the Setting app, it just stays there saying "Connecting to "X" network..." and nothing happens, unless I do either thing: if I tap the Home button and go back to Settings, it brings me back to the wifi menu, still unconnected; if I drag down Notification Center or bring up Control Center and bring them up/down again, a pop up shows up saying "Can't connect to the network". Apparently, this is to new networks, since when I got home, it automatically connected to my house's wifi. On the spot, I tried reseting everything from factory, and try to connect to another wifi nearby, since I had a copy of my phone on iTunes, and it worked, and when I came back to that same wifi, it didn't but I scratched the option that it was that router problem, because now I'm at my other apartment in the capital, and tried to connect to wifi (since I reseted everything and had no password saved automatically) and the same thing happened.
    Help me out here, I'm going insane!

    Turn off your router, wait ten seconds and turn it back on.

  • OfficeJet Pro 8000 Wireless - Problem Setting Up to a new network

    I have followed the other advice of other posts.  I have tried holding the wireless button & hitting resume button 3 times. It still prints the same thing.  It is still looking for the old network(Network not found) and won't give an IP adress.  Says wireless is working. I get the MAC address, but status is disconnected. It doesn't seem to want to reset. I am trying to add the printer to a new network. Getting piles of printouts. Please Help.

    Now I have finally have the printer to hpsetup for the network.  Still not able to connect.

  • Setting up a new network - How does this look?

    Hello,
    Current layout of network - http://i30.tinypic.com/fkywav.jpg
    We currently use this way of setting up our network and we may be moving to a new office so i'm looking at the best way of setting up the new network while we have a relatively clean slate. All wiring is done via CAT5e ethernet.
    We run OS X Server 10.5 and use the following services within the building. File sharing, email, internet. We backup all machines individually with external drives but i'm looking at getting a large storage device to enable everyone to backup to one location using Time Machine Server.
    I'd like to know if the way our network is currently set up is the correct way for what we need. In the near future i'd like to start using iCal sharing, and hosting websites internally for web development.
    Regards
    James

    What you have will work; it's fairly typical network.
    The physical plant, and the plans for expansion, and the current speeds and feeds are also key details when designing a network.
    Cat5e? Don't skimp. Go Cat6 or better. Wiring is always around and in use for far longer than any of us want, and the cost of installation is comparatively vastly higher than the cost of the wire itself; retrofitting is to be avoided.
    As part of avoiding unnecessary retrofitting, run extra Cat6 or better wiring in parallel, too. Prepare to segment your network based on business organization or on physical organization, or both. The extra runs can provide physical redundancy, and bandwidth. The incremental cost of building out with extra (spare) wire is negligible. The cost of not having a wiring run where you need it is higher.
    Without knowledge of the physical plant, I'd also look at the establishment of wiring closets and such; you'll usually have a star at the core of the network in a smaller configuration, then stars at the wiring closet(s) (if any) and out at the desktop. This may be a plan now, and you have the wiring in place for the main runs to retrofit a server closet as you need it. Long wire runs out from the core are a pain. In a moderate or larger network, you'll be using the backhaul connections to the network cores; runs between server closets. (And if you may add server closets, remember the need for cooling can arise.)
    Depending on your plans and your network activities, I might (also) establish higher-bandwidth wiring between the wiring closets; what amount to backhaul connections. Either used up front, or in the closets should you need to place switches further out.
    Also look for corner cases, such as a business and operational environment where you'll be running a dozen or two client netboot operations at exactly 8:01 each and every morning as each staffer arrives and boots up the workstation; these cases can play havoc with aggregate bandwidth and server requirements.
    You may want to consider a parallel network (whether WiFi or wired) for guest access; a conference room or conference center network. You'll almost certainly want 11G and 11N WiFi for your own internal use, too.
    Yes, I usually overbuild these things. Planning and wiring are (comparatively) cheap. Installation isn't.
    Backing up to a Mac OS X Server disk or a TC disk via TM is part of what you need. If you get corrupted archival volume(s) or if your RAID array is somehow damaged or lost or stolen, you're in deep sneakers. I've had a couple of TC archives corrupted; stuff happens. Plan for off-site archives.

  • Do you have to disable your Wifi on your existing Reuter if using time capsule to Create a new network

    Does one need to disable the wifi on ones reuter if using a time capsule to create a new network what happens if you don't and what are the benefits of doing so

    No but you may experience a bag of hurt from cross channel interference. You may have to reset the Subset Mask of one of the routers along with separating the broadcast channels.
    Further if you then have one device a PC perhaps on one network and your Mac on another you may not be able to share files/ITunes etc.... with any ease.
    So switching off the Wifi on the router/modem and hanging an Ethernet cable to the Time Capsule and setting that up as your WiFi router distributing the IP addresses over DHCP really is the least problematical approach.
    IF you have cable Internet with a decoder with Ethernet output ditch your old router completely !

  • Can't create a new network

    Hi,
    I installed my airport express software and configured my system to connect via airport to my DSL internet service using DHCP. I'm now connected to the internet wirelessly, but the airport setup assistant won't allow me to create a new network so that I can print wirelessly. It tells me that there's an error with my airport extreme card and that I need to make sure it's installed correctly. What am I missing?
    Thanks,
    Stew

    Do you have another wireless base station? If so, simply configure the AirPort Express (AX) following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

  • Move Time Capsule and Laptop to New Network

    I have been searching the forums it haven't found a clear answer to this question.  I have been backing up my laptop using Time Machine and Time Capsule on one wireless network (TC has joined the wireless network, it does not serve as the router for the network).  I am now about to move to a new apartment and will be using a new wireless network.  Can I transfer the laptop and the Time Machine to the new network and maintain the continuity of the backups I have been making?  Can anyone provide guidance on how to do that?  Also, is there a way to set it up prior to moving -- I know the SSID and password of the new network.  I feel certain that these questions have come up before, but I can't find clear discussion of it.

    My suggestion FWIW. Ask the cable/DSL provider if it would be possible to install just a modem with no router. Connect an Ethernet cable from the modem to the World or WAN port on the Time Capsule. Your computer can connect using wireless or wired as you choose.
    The above should be done with all devices turned OFF for at least one minute. After you have everything physically connected first turn on the modem and wait until the status lights indicate it is connected to the ISP. Then power up the Time Capsule and wait until the status light turns Green or is blinking orange (or has changed from blinking to steady orange.) Lastly, power up the computer. Open Airport Utility and proceed from there.
    If all goes well you will have a functioning network under the control of the Time Capsule router.
    If the ISP will not provide a separate modem, then you have some potential problems using your Time Capsule. You would have to configure it to run in Bridge Mode. That means in Airport Utility you have to configure the Wireless setting to use the Join an Existing Network option. I can't tell you if a Time Capsule will work with a third-party router properly, but that is how you have to set it up.

Maybe you are looking for