AT NEW field in OO not working

Hi Friends,
I am working on OO ALV and using following ABAP statements.
      LOOP AT er_data_changed->mt_good_cells INTO w_good.
        v_fldname = w_good-fieldname.
        AT NEW row_id.
Sample record of er_data_changed->mt_good_cells is as follows:
ROW_ID      SUB_ROW_ID FIELDNAME
        2 |         0 |    MATGP
        2 |         0 |    MATNR
        2 |         0 |    WERKS
        3 |         0 |    MATGP
        3 |         0 |    MATNR
        3 |         0 |    WERKS
        4 |         0 |    MATGP
        4 |         0 |    MATNR
        4 |         0 |    WERKS
        5 |         0 |    MATNR
        5 |         0 |    WERKS
But in each loop pass code under AT NEW row_id is executed even id row_id is same, what it was in the previous loop pass. In the above case AT NEW row_id is being executed 11 times.
I only know that in OO, There is a sever check for the data type Compatibility.
I have declared w_good as:
w_good     TYPE lvc_s_modi.
Please let me know what am i supposed to do to make controll level processing possible in OO.
Regards,
Surya

I think u need wait some time to get that field reflect in Query Designer.
Try log off and re-login to query designer couple of times.
Also try activating multiprovider directly or using program RSDG_MPRO_ACTIVATE

Similar Messages

BP new field update is not possible

Hi Experts,
I work in CRM 4.0 which is connected to R/3. I have created a new BP field with EEWB. I would like to replicate this field into a standard R/3 field.
Without any enhancement the new field is replicated in "Insert" mode but in "Update" the replication does not work.
I discovered two problems in R/3. The exchange structure does not contain the new field and the BP does not exist in R/3 BUT000 after creation.
In "Update" mode the system searches for BP in R/3 BUT000.
Finally I extended the exchange structure in R/3 and if I create a new BP it will be created in R/3 even in R/3 BUT000 and during "Update" the new field value will be updated.
My only problem is that I have 100.000 BP's in the systems which were created without the enhanced R/3 structure and the update of the new field content is not possible. The R/3 BUT000 does not contains these 100.000 BP's.
Do you have any idea how to solve this issue?
Thanks in advance!
Regards,
Tom

Hi Thomas,
I would have liked to reply you back earlier on, but I was able to see my points only today.
1 How to manipulate Bapi to load it. Please select your Bapi which refer to the proper object in trx CODE Bapi. Then talk to your developper to create the right program to load the missing data, supposedly able to manage files (better a txt file).
Next monday if you wish I may send you documentation concerning Bapi, if you give me your e-mail
2. How to upload to your backend the changes of Bps. There is an envent you need to associate to your object Bupa in administration CONSOLE - DATA EXCHANGE. It is explained in the Best practise manual called Replication.
Please refer to my attached thread to find out the manual in the Best Practise Crm for your version:
Re: Download Conditions from R3
Then, if this doesn't work, check if the function module in charge of uploading the changes is working, by putting a Breakpoint in the FM associate to your object Bupa in Business object in administration console.
<b>Please reward with points if it helps.</b>
AndreA

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

Reset Firefox to its default state
If you're having major problems which you can't resolve, start fresh with only your essential information.
Troubleshooting Information
This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
Application Basics
Name Firefox
Version 33.0.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/1
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports
Extensions
Name Version Enabled ID
Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Adblock Plus Pop-up Addon 0.9.2 true [email protected]
Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
Graphics
Adapter Description Intel(R) HD Graphics
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
Driver Date 1-30-2013
Driver Version 8.15.10.2993
GPU #2 Active false
GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend direct2d
AzureContentBackend direct2d
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.blockautorefresh true
accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size_cached_value 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 1
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
browser.startup.homepage www.google.com
browser.startup.homepage_override.buildID 20141023194920
browser.startup.homepage_override.mstone 33.0.1
browser.tabs.loadInBackground false
dom.mozApps.used true
extensions.lastAppVersion 33.0.1
font.internaluseonly.changed true
gfx.direct3d.last_used_feature_level_idx 1
keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
media.gmp-gmpopenh264.lastUpdate 1413750166
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1414375733
network.cookie.prefsMigrated true
places.database.lastMaintenance 1414404204
places.history.expiration.transient_current_max_pages 102059
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
plugin.state.npmedia 0
plugin.state.nptimegrid 1
print.printer_Canon_MG2100_series_Printer.print_bgcolor false
print.printer_Canon_MG2100_series_Printer.print_bgimages false
print.printer_Canon_MG2100_series_Printer.print_colorspace
print.printer_Canon_MG2100_series_Printer.print_command
print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
print.printer_Canon_MG2100_series_Printer.print_edge_left 0
print.printer_Canon_MG2100_series_Printer.print_edge_right 0
print.printer_Canon_MG2100_series_Printer.print_edge_top 0
print.printer_Canon_MG2100_series_Printer.print_evenpages true
print.printer_Canon_MG2100_series_Printer.print_footercenter
print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
print.printer_Canon_MG2100_series_Printer.print_footerright &D
print.printer_Canon_MG2100_series_Printer.print_headercenter
print.printer_Canon_MG2100_series_Printer.print_headerleft &T
print.printer_Canon_MG2100_series_Printer.print_headerright &U
print.printer_Canon_MG2100_series_Printer.print_in_color true
print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
print.printer_Canon_MG2100_series_Printer.print_oddpages true
print.printer_Canon_MG2100_series_Printer.print_orientation 0
print.printer_Canon_MG2100_series_Printer.print_page_delay 50
print.printer_Canon_MG2100_series_Printer.print_paper_data 1
print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
print.printer_Canon_MG2100_series_Printer.print_paper_name
print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
print.printer_Canon_MG2100_series_Printer.print_plex_name
print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
print.printer_Canon_MG2100_series_Printer.print_resolution_name
print.printer_Canon_MG2100_series_Printer.print_reversed false
print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
print.printer_Canon_MG2100_series_Printer.print_to_file false
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 2
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1412311800
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
NSSUTIL 3.17.1 3.17.1
Experimental Features
Name ID Description Active End Date Homepage

Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?

Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?

Did you install Flash Player?
http://get.adobe.com/flashplayer/

Brand new IPOD touch does not work w Bose speaker docking station is there anything that needs to be done?. The Nano that I have works fine.

My new Ipod touch is not working with my Bose Speaker docking station. My Nano works fine.
Any reasons for this?

Does Bose say it will work with your model iPod and iOS?
Does it appear that the iPod fully seating in the dock?

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

Field Exits are not working in ECC6

Hi Friends,
We upgraded our 4.6C system to ECC6 but after upgradation field exits are not working. What could be the reason.
We are using GUI version-7.1 and SP-10,Release-6.
Rewarded,
Steve

Hi there,
Try this link ... it could help you.
[http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm|http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm]
If not, give an example.
I did the same upgrade without problems.
Best regards.
Valter Oliveira.

Updated to 10.4 and the New Purchased feature is not working. Anyone else having this problem?

Updated to 10.4 and the New Purchased feature is not working. Anyone else having this problem?

I did originally, but it fixed itself after a few minutes.

Fetch new mail messages does not work

On my notebook the fetch new mail messages does not work
Settings:
- Fetch new messages: every minute
- Play sound Purr
I need to us the manual button.
On my imac it works fine with the same accounts

My mail sounds are all screwed up. I hear the plane fly when I send an email but when I receive mail, no sound. I have rules set up which worked in Tiger. One rule is for mail to play a message "You have a message from "John Doe" when I receive an email from "John Doe" but it only plays when I send "John Doe" and email. Assbackwards.
Sometimes when reading new mail, it just disappears. I have to click on it again. I find this version of email to be very flaky!
Dave Brenneman

My new orkut page does not works anymore after uptading firefox from Firefox v9.0.1 to 10

My new orkut page does not works anymore after I uptaded this morning my browser firefox from Firefox v9.0.1 to 10 . How can I find that version mozilla Firefox v9.0.1???

Hello, friend. Thank you so much. I've already solved the problem once you sent me that link.
Cheers!

I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

Publishing HTML(Page content) field required field validation is not working

The required field validation is not working on Site Column of type "Full HTML content with formatting and constraints for publishing". I found a link i.e.
https://social.msdn.microsoft.com/Forums/office/en-US/7b544aae-2562-4b8e-8e5b-36a1d47a4d14/publishing-htmlpage-content-field-required-field-validation-is-not-working?forum=sharepointdevelopment
which tells this is a hot fix in July 2014 CU . Can anyone help me with what all Fixes are there in July 2014 CU. So that I can update only if it required!
Or any other alternative where I can use the required field validator on "Full HTML content with formatting and constraints for publishing" column type?

You could add a scripteditor webpart on the newform.aspx page and add client side validation using jQuery.
$(document).ready(function()
var fname = document.getElementById('fname').val();
var lname = document.getElementById('lname').val();
var age = document.getElementById('age').val();
/*Do not know how to get element by class and that too, two different type. Have to check if user chose anything or not*/
$("#submit").click(function()
if(fname.length === 0)
alert("Please input a first name");
else if(lname.length === 0)
alert("Please input a last name");
else if(age.length === 0)
alert("Please input an age");

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

AT NEW field in OO not working

Similar Messages

Maybe you are looking for