At the end of every month, my phone lags and texts aren't sent or received
Every month, around the time I get the Verizon alert that I've used 90% of my monthly data, my Note 3 seems to slow down significantly.
I don't mean my data connection has been limited, my phone itself lags. Tapping things takes a second or two to register and my phone just generally stutters and lags. Also, texts take hours to send, if they do at all. I don't receive any texts unless I restart my phone, which seems to retrieve most of the texts I missed.
Both of these problems instantly disappear when the month ends and my data counter resets. I'm not 100% sure that it's linked to my data usage, but it starts around the same time I use 90%. I've tried disabling the data usage limit and alerts built into Android, but it doesn't fix it.
What's going on? Is this a Verizon problem or is my phone defective? How can I fix it?
Hello sarbs,
Being able to use your data is very important and we want to make sure you have access to it at all times. I can understand being concerned if this happens every month. Has your phone completed any software updates before this started to happen? We can have you remove and re-add the sim card to see if that resolves the issue as well. The steps are in this link http://vz.to/VH1pNG Please try this and let us know how it works.
CandiceH_VZW
Follow us on Twitter at @VZWSupport
Similar Messages
-
How do I have a totalizer reset at the end of every month?
We are using Lookout 5.1 in an application that is receiving a Modbus input giving us a totalizer value. We need to have this value reset to zero at the end of every month. Also want the monthly total to be sent to an excell spread sheet. All help is much appreciated.
I think this NI Post will help you out....
Regards -
Scheduling Batchjob at the end of every month
Scheduling Batchjob at the end of every month
We have an requirement where in we need to schedule batchjob to excute at the end of every month.
Could anyone be kind enough to suggest the rite way?
The workday/time option which will get by clicking on >>,
does not work.
Appreciate if anyone can provide your inputs.Hi just try in the following manner
Go to SM36 -->
job wizard from the applicataion toolbar-->
give a job name and set the priority of the job as your requirement (high priority)
select abap program step and continue
give the program name and if required then give the variant name and then continue
pls donot check the check box addtional steps required
continue
select radio button date/time
give the date and time
select the check box period
continue
set the time monthly/hourly/daily
then select the continue button
and press the complete button
now the job has been scheduled and released ...
just check
if the screen has some mandatory option in the selection screen then u have to give some variant
try and enjoy -
History seems to clear at the end of every month using the Safari App
Hi,
I use Safari a lot and noticed something a little odd with the History clearing itself automatically at what seems to be the start of every month. I have also noticed Safari on my iMac also does a similar thing but not the same.
Can anyone help at all on this?
Many thanks
AdamDon't know about the Mac, but for my phone I have noticed sites I do not visit often disappear from URL history when typing in a URL after a time. Never really tracked it down to how long.
-
Repeat_interval In DBMS_SCHEDULER.create_job - for the 2nd of every month
Hi All,
I want to specify in the repeat_interval that the scheduler for this job has to be executed on the second of every month at 8 pm .
I have been racking my brains but nothings coming out.
Any suggestions??You probably want an interval like this:
FREQ=MONTHLY;BYMONTHDAY=2;BYHOUR=20;BYMINUTE=0;BYSECOND=0;You can use the DBMS_SCHEDULER.EVALUATE_CALENDAR_STRING function to test it, like so:
SQL > DECLARE
2 start_date TIMESTAMP;
3 return_date_after TIMESTAMP;
4 next_run_date TIMESTAMP;
5 BEGIN
6 start_date :=
7 to_timestamp_tz('01-JAN-2003 10:00:00','DD-MON-YYYY HH24:MI:SS');
8 return_date_after := start_date;
9 FOR i IN 1..5 LOOP
10 DBMS_SCHEDULER.EVALUATE_CALENDAR_STRING(
11 'FREQ=MONTHLY;BYMONTHDAY=2;BYHOUR=20;BYMINUTE=0;BYSECOND=0;',
12 start_date, return_date_after, next_run_date);
13 DBMS_OUTPUT.PUT_LINE('next_run_date: ' || next_run_date);
14 return_date_after := next_run_date;
15 END LOOP;
16 END;
17 /
next_run_date: 01/02/2003 08:00:00.000000 PM
next_run_date: 02/02/2003 08:00:00.000000 PM
next_run_date: 03/02/2003 08:00:00.000000 PM
next_run_date: 04/02/2003 08:00:00.000000 PM
next_run_date: 05/02/2003 08:00:00.000000 PM -
Is it possible to export to PDF without a Return character at the end of every line?
I am the author of a book whose first edition has been typeset and extensively amended in InDesign. I now need to rewrite the first edition to produce a second edition.
When I copy-and-paste from the PDF with which the publisher has supplied me into MS Word, I get a Return character at the end of every line, which means that text doesn’t automatically wrap and sentences are fragmented so that I get spurious grammar errors.
I know that not all PDF files have a Return at the end of every line. Is it possible to restrict Returns to the end of paragraphs when exporting from InDesign to PDF? If so, what should the publisher be asking the typesetter to do?Thanks for your lightning-swift and helpful replies, Mike & Ellis.
I don't have InDesign myself, so I know hardly anything about how it's used. I'm just trying to research what an internationally-known publisher should already know how to do, but apparently doesn't!
Following your suggestion, Mike, I have downloaded the trial version of Acrobat and exported the PDF to a Word file. This has been moderately successful as there are far fewer spurious Return characters, just a few that I suspect may be hangovers from the typesetter having introduced soft returns in ID.
As you've suggested Peter and Ellis, I'll suggest that the publisher asks the typesettter to export from ID to RTF and Text to see if that's even better.
Message was edited 15:24 GMT by: AlanS5100 -
I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?
Yes I know what you mean about it cluttering the thread and for personal emails it is better without the signature. However this relates to sending business emails from an iPhone so I need the signature present on every email.
I can't find anything in Settings so I was hoping someone may have some knowledge/information/experience regarding this problem. -
I am using my Description as the caption on Slideshow. I ticked the "Show Title Slide" button and iPhoto physically copied the description on the first slide onto the end of every other description. I can find no way of removing them other than by hand. Unticking the "show title slide" did not reverse the situation back to my required state. Any ideas why it might have happened or how it might br resolved? Regards, Marshfrog1
Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail -
Make an alert box at the beginning of every month
I'm writing a budgeting tool and at midnight at the beginning of every month I want to pop up an alert saying it is the start of a new month and enable a button in jsp.
I have tried a couple ways to do this. First I wanted to keep creating a calendar and check if the date was 1. But then this would be much more work than is needed.
Next I tried to use the TimerTask class and set a boolean to true at the first of every month, but then I couldn't figure out how to make the javascript run when the run method of that thread executes. I tried using a while loop in the jsp page itself to check the boolean but this just caused the page to hang.
A third idea I was trying is to have an invisble form with a hidden field using this boolean. I was trying to figure out a way to use onChange to trigger the javascript, but this would only work for some sort of visible input.
Anyone have any exprience on scheduling a task like this at the beginning of every month or about how to force a page to reload at a specific time? Thanks.You could even put that in a frame with a form to navigate a seperate frame:
//frameset
<html>
<frameset frameborder="0" framespacing="0" rows="26px,*">
<frame scrolling="no" frameborder="0" marginheight="0"
marginwidth="0" name="frameA" noresize src="testingB.jsp" />
<frame scrolling="no" frameborder="0" marginheight="0"
marginwidth="0" name="frameB" noresize src="http://www.google.com" />
</frameset>
</html>
//then your time-important page (called testingB above)
<html>
<body>
<script type="text/javascript">
function navigate() {
var navigateTo = document.forms[0].address.value;
if (navigateTo.toLowerCase().indexOf("http://" == -1)) {
navigateTo = "http://"+navigateTo;
parent.frameB.location.href = navigateTo;
return false;
function doAlert() {
alert("Time to do Something");
window.location.reload(); //so it will happen again next month.
<%
//When first created, the calendar points to now.
Calendar cal = Calendar.getInstance();
long curTime = cal.getTimeInMillis();
//then, lets set it to the 1st day of the month, at 00:00:01.00 (1 second after midnight
cal.set(Calendar.DAY_OF_MONTH, 1);
cal.set(Calendar.HOUR_OF_DAY, 0);
cal.set(Calendar.MINUTE, 0);
cal.set(Calendar.SECOND, 1);
cal.set(Calendar.MILLISECOND, 0);
//finally, add a month to get the first second of next month
cal.add(Calendar.Month, 1);
long triggerTime = cal.getTimeInMillis();
%>
//set the doAlert to occur after the # of milliseconds between now and
next month.
setTimeout("doAlert()", <%= (triggerTime - curTime) %>);
</script>
//form will read address you type in input, and navigate the other frame there.
<form onSubmit="navigate();" name="nav">
<input type="text" name="address" size="100" style="margin:3px" />
<input type="submit" name="Go" value="Go" style="margin:3px" />
</form>
</body>
</html> -
my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore. -
I guess I said everything in the topic...anyways, from March 12 to April 12 was the data cycle. After April 12 it shot up to May 20th! That's a whole extra week of data that is definitely going to be over because there are more days use data? Why?
G42od wrote:
We share 4gb for our plan. It works out perfectly usually. But this month says the new data cycle doesn't start til the 20th. We've already gone over a gig easily in this extra week. My billing cycle is always set at the 15th of every month and that has not been a problem...until we go over in data and get charged more money. Is the data cycle going to fluctuate every month?
Your billing cycle and your "data cycle" are the same, and that cycle doesn't change, unless you request it or maybe if you bundle services or something. For example, my bill cycle runs from the 18th of one month through the 17th of the next. My due date sometimes varies a few days, not really sure why, probably because not all months have the same number of days. If you look at the breakdown by line on your bill, you will see these dates. What you are describing sounds like the due date is different than usual. All lines on the same account have the same billing cycle for all services...calling/texting plan, data plan, insurance, etc.
I am a little confused, though, because you stated your "data cycle" is always the 12th through the 12th (it would actually be the 13th through the 12th), then you say the bill cycle is always set for the 15th, and then you say the data cycle is pushed to the 20th this month. What is the billing cycle for the voice/text plan? What date did the bill print (this should be on the first page)? Finally, what is the due date on the most recent bill? Bill cycle and due dates are not the same. -
Premiere adding 15 frames to the end of every clip in export/sequence
Last night I exported an AVCHD 1080p Square Pixel sequence to a H.264 video file. When I checked on it this morning, the export had 15 frames added to the end of every clip in my video. I checked my project in Adobe Premiere Pro CC, and noticed that those extra frames were also added to my sequence. Any clue as to what would cause this?
Can you post a screenshot of your timeline.
Also one zoomed in on a problem area.
Are you using crossdissolves in a 30 fps sequence? -
At the end of every e mail I send there are strings of letters, numbers, signs, etc. How do I fix this?
yes, here it is:
From: Joyce Bell <[email protected]>
To: Mary Ellen Pounds <[email protected]>
Sent: Wednesday, February 12, 2014 8:44 AM
Subject: Wednesday
I have typed two e mails and stopped to look at tv and then the e mail was gone. What is going on. I am sending this now to tell you more are coming as I think to retype them.
Joyce Bell
Preferences
1
2
3
4
5
6
7
8
9
0
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
Return
capslock
a
s
d
f
g
h
j
k
l
shift
`
z
x
c
v
b
n
m
shift
English
alt
alt
Preferences
Preferences -
Frozen frame at the end of every clip
Without transitions, there is a frozen frame at the end of every clip that can be very distracting. Is there a way to disable this? I've been putting transitions in, which works, but I don't want to have to do that.
Thanks,
ElsaThank you very much! Sorry it took me a while to get back to you. This ended up working! It ***** that I have to add this extra step, but I'm glad there is a work around. Thanks again for you help.
-
To display "modified" by and "modifed date" and the end of every sharepoint page
Hi there,
I want to display
"modified" by and "modifed date" and the end of every sharepoint page and I have as many as 2000 pages
I have the code for it as below which I have placed in my master page
<SharePointWebControls:DateTimeField FieldName="Modified" EnableViewState="true" Visible="true" runat="server" ControlMode="Display"/>by
<SharePointWebControls:UserField FieldName="Modified By" Visible="true" runat="server" ControlMode="Display"/>
The problem is I am not understanding under which div should I place it to be able to see it at the end of the page.
Please suggest.Hi,
According to your description, my understanding is that you want to insert the two fields at the end of the page by inserting the corresponding controls into the master
page.
The figure below will show how to insert code into master page:
At the end of the page, it will be:
Thanks,
Dean Wang
Maybe you are looking for
-
Can you remove the old phone from itunes and authorise the new one?
-
Have worked out a horizontal menu using css but I'm stuck with the drop down part. There are two areas that drop down, one under Data Entry and the other under Reports. So far the only style used is display: inline;.View the file --> http://classreun
-
Hello, I'm discovering AIR and I'm looking for XSL Transformation trough AIR. I first try to set the initial window to may xml file, refering to an internal xsl stylesheet, but as a result, I only get the raw XML file, without the transformation. I'v
-
This is what pops up when Illustrator, Photoshop, or InDesign are opened.
-
I have installed JDK to Program Files directory in Windows2000.So how i set Java_Home environment? Jave_home=d:\programe files\jdk1.3 is wrong because have a space.