AT1 value not showing in excise JV in j1ih

Dear SAP gurus,
in j1ih, when I am giving the doc number of PLA hold and PLA BED,CESS,ECS, it is not capturing the value of HCess which i have maintained in AT1..though i haved ticked AT1 in the excise register.It is not even capturing the value of AT1 in table J_1IEXCHDR. Plz suggest solution and also mention if any note or patches are required to be implemented.Thanking all,
Munmun

in customization have you given AT1 for PLAAT1.
Spro-img- Logistics u2013 General- Tax on Goods Movements- India- Account Determination- Specify Excise Accounts per Excise Transaction.
For TR6C give the PLAAT1. and check.
Regards
jrp

Similar Messages

Value not showing in Balance tab in J1IH

Dear SAPIENT,
When we go in J1IH and after filling all data , once we click on balance tab , system showing zero balance in all excise field.Pl tell me why its happening .
In quality , its showing but not in production.
Thanks,
Dharmveer

Hello,
I have the same problem
please guide me to solve the same
thank you
regards,
Maulik Maniyar

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

Filter values not showing on iPad

Hi,
I have a BW query based universe (UNV) that is published to iPad. The WebI report runs fine in BI Launchpad. However, when I open same report on iPad, the prompt values are not show (I see only blank Blank Blank) and report is not executed. BW server is BW 7.3 BO is BO 4, SP2.
How do I fix this issue?
Regards,
Nikhil

Hello Simone,
please can you tell me, if the open document function with refresh parameter is working in BO mobile App V 4.0.3 (Build 1211)?
In the Release notes for this Version it is described how to do this:
Open Document
1. Apart from iDocID, sIDType and sDocName, other document identifier parameters are not supported
in the OpenDoc URL.
2. Apart from sReportName, sRefresh, IsM[name] and IsS[name], other input parameters are
not supported in the OpenDoc URL.
3. Session management parameter (token) is not supported.
4. Output parameters are not supported in the OpenDoc URL.
We tried to use the following link, but the report did't refresh with the correct parameters:
http://svie32sapbo1:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AfFdCbmEEvZIiVXXFLh4iPY&sIDType=CUID&sRefresh=Y&lsMWert=Alarmierung
The Part "Wert=Alarmierung" should be dynamical in future.
Thank you and regards
Wolfgang

Ssrs parameter default value not showing ,when available values is binded to query dataset

I have developed a report using sql server data tools for vsiual studio2012 ,i have defined few parameters ,on one of the parameter when available values is binded to a dataset query, the report default value is not showing in report preview .
Many Thanks
Chandra

Hi Chandra,
According to your description, you have set the default value for a parameter, but it's not displayed when initially running the report. Right?
In this scenario, since you have set the available values bind to query, so your default values should be within these available values. If these default values are not within the available values, the default values will be not displayed. So please check
the default values.
Reference:
Add, Change, or Delete Default Values for a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Metadata values not showing in Site Studio layout using Idoc Script

Hi All,
We have a SS layout (secondary) with replaceable regions for showing content that is listed in a primary page dynamic list.
Part of the layout shows contribution elements of Contributor Data File content items, but part of layout also shows metadata values. We use  to show the content item Title with no problems.
However, for some content items, some metadata values are not showing on the layout - specifically a custom metadata field called xFinishDate (which is of type 'Date' in Config Man). The code  simply does not work (nothing is displayed) for some content items, despite definitely having a set FinishDate value. Some other content items show this value fine.
The  value works for ALL items, but the  does not, and there appears to be no difference between the items that it does, and does not work for. They are all CDF, same DocType, same CheckIn profile, etc.
The non-working items are all released and indexed. Their Content Information in Content Server shows complete metadata. I have resubmitted the non-working items for reconversion in Repo Man but no luck.
Is there something I am missing? Any help is greatly appreciated.
Luke.

Actually the default DOC_INFO resultset that is on the page seems to be for the content item being loaded into the secondary layout's replaceable regions. This is why DOC_INFO.dDocTitle gives the results expected.
However, I think I have discovered why the xFinishDate value was not showing. Using sapan's code (and modifying it a bit) I was able to print out all the metadata field names and values for default DOC_INFO resultset.
Using this URL as an example: http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011217
At the top of page region (replaceable) where the Contributor Data File is loaded into, the DOC_INFO resultset is relevant to the content item that is being loaded into the layout (content ID: BD3_011217 - as per the URL format), which is what we want.
However, throughout the Contributor Data File content, if a link is made using the Site Studio link wizard via FCK Editor (in the above case, it is the position description link, which is a link to a PDF) and the link is 'Link to a file' and the 'Choose Target section' is selected as 'Use default website section metadata', the resulting link looks like "http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011216". Any references to the DOC_INFO resultset on the page after the instance of this link now use the metadata of the content item referred to in the link, not the original content item. I have dumped out the DOC_INFO fields/values in different parts of the layout to prove this. The linked content item has no xFinishDate value so this is why nothing displays (displaying xFinishDate needs to happen after the link to the position description).
I guess I need to either:
- change the way the link is made to the content item to "Link to the Content Item's URL", but I would prefer not to expose the resulting path e.g. "[!--$HttpRelativeWebRoot--]groups/group-name/@account-name/documents/content-type/content-id.pdf"
- explicitly make a resultset using  with the content ID I know I want and use it instead of the default DOC_INFO one. Is there any other way to make a resultset comprising of a single item's metadata?
9.45 SS_GET_SEARCH_RESULTS
■ Description: This is a wrapper around the regular CS GET_SEARCH_RESULTS
service. It allows some Site Studio features to be specified simply as flags and have
the real query syntax be constructed on the server. It can modify the standard
'SearchResults' resultset to contain an additional column called 'ssUrl' which will
contain the Site Studio-friendly url for all of the search results.
■ Parameters:
– siteId: the unique identifier of the site (required).
– ssLimitScope: True/False, restricting scope to within the site only (optional).
– ssUserSearchText: user-supplied search text (optional).
– ssWebsiteObjectType: object type (optional).
– computeFriendlyUrls: True/False, modify results to include ssUrl (optional).
■ Returns: resultset named ’Search Results’.
■ Security: The user must have at write access to at least one security group on the
content server
Thanks to everyone for their help. Almost there!
Edited by: lukeb2112 on 18/01/2010 17:30

Migo is not showing the excise tab - header level and item level

Hi,
i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.

Hi,
There are two kinds of statuses, system status and user status.
You can only influence System status if you execute a business transaction that changes the system status.there
are four system statuses open, In process,Released and Completed.
User status can be created as additional information to the system status in any numbers.But for this you
need to define a status profile which would further be assigned to transaction type(header status) and
item categories(item status).
The header status is independent of the item status. One exception is the status Completed.
If all items have the status Completed, the header status is also set to Completed.
For defining a status profile you need to go to
SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
Hope this helps.
Regards
Sidd

Discount value not showing in the P.O printout

Hi,
I have created a Service p.o with 5 line items,i have entered the condition type RA01 = 10 % for all the items,
But in the P.O printout the discount value is showing only for the first 2 line items , the value is not showing for the balance 3 line items.
Any help will be greatly appreciated.
Nijamudeen.S

Hi,
if the same condition type is used for previous two line items, then this is ABAP issue. May be smartform coding is restricting to print the value for more than 2 line items. Can you seat with ABAP and check.

BCWP values not showing in CNE5

Hi,
After executing CNE5 report it not showing BCWP value in particular project only.I have checked all the necessary data like actual dates are maintained.
What could be the reason.
Please guide.
Regards
Nitin

Hi,
Thanks for reply.
I've already done that.
BCWP is not showing only for 4 projects & in other project it is giving correct BCWP value.
When we generate MIS through BW Module I am getting BCWP graph for the same project whose BCWP not showing in CNE5.
Thanks & Regards
Nitin

VALUES NOT UPDATED IN EXCISE INVOICE

hi gurus ,
well all the settings to my knowledge are correct for CIN customization , but the excise values are not updated in excise invoice .the values are 0 " . can ne1 pl help ? dts top priority .

Hi,
Spro>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoicesu2014here check for movt type 122 which register is maintained once appropriate register is maintained there then system will update the same.
Or even you can try J1I5 update register with movt type 122 & enter material document (return delivery material document no) & classification IPD (Issued for clearance/Removal on payment of duty) & select the correct radio button of register. Once update the register then Extract data for excise registers Using J2I5.
It will update both the data in the register
Rgs

Variable value not showing in sql developer tool

HI,
I am using sql developer tool. when i take mouse in variable name at debugging its not showing variable value and instead showing variable name data type and owner. but in past i have used sql developer tool where when i take mouse on variable at debugging mode it shows the varable value. please tell me is there any issue in sql develper tool currently i am using.
sql developer version 2.1.0.63

Sorry - but I doubt if you will get much help for that ANCIENT version of Sql Developer.
My best suggestion is to download the current version and see if you still have the problem. There have been HUNDREDS of bug fixes since that version you are using.
Oracle SQL Developer Downloads
Take note that the current version REQUIRES a much higher JDK version than what you may be using. And do NOT try to install the new version on top of the old one.
Install the new version into a totally new folder. You will be ask if you want to import your settings from your current version.

UDF Value not showing in SQL

Dear Experts...
Here is a strange situation in my DB. I have some UDF on A/P Invoice for TAX details print preview.
UDF Values are properly showing in SAP but not in SQL in same table, Same document they are blank in SQL.
I can't understand why SQL does not showing me Value of UDF.
Regards,
Ravi

Hi Ravi,
Run below query in query generator for specific document number and check if udf values are shown or not?
SELECT T0.DocNum, T0.CardCode As 'Vendor Code',T0.CardName As 'Vendor Name', T0.NumAtCard As 'Vendor Ref. No.', T0.DocDate, T0.TaxDate, T0.DocTotal - T0.VatSum As 'Basic Value of Goods', T0.U_CENVAT As 'CENVAT', T0.U_ECess, T0.U_HSCess, T0.U_VAT_4, T0.U_Add_VAT1, T0.U_VAT_12,
T0.U_Add_VAT2, T0.U_CST2, T0.U_CST4, T0.U_CST5, T0.U_Service_Tax, T0.U_ST_ECess, T0.U_ST_HSCess,T0.TotalExpns As 'Others',T0.DocTotal - T0.VATSUM As 'Total' FROM OPCH T0 WHERE T0.docType = 'I' and T0.DocNum=[%0]
Thanks,
Neetu

Value not showing in Radiogroup

Hi,
I have a radiogroup that seems to be defined correctly based on a database column value, but the selected radiogroup values do not show up on the Edit form. I see the values in the table and on a report but not on the Edit form. Other fields on the form show up correctly. The Radiogroup works fine for data entry, but not for edit. Any ideas on what could be wrong would be appreciated. Even compared it to other forms and the radiogroup properties are almost identical.
Using version 3.2.1 of Apex.
Thanks,
pat

Is the radiogroup item set to retrieve the value from the database with each page view? This is controlled with the "Source Used" setting on the radiogroup item.
This is from the help:
>
Determines which value takes precedence, the cached value from session state or the item source value. For items with source type Database Column, select Always unless you do not want the associated row fetch operation to populate the item if the page branches back to itself.
For items with other source types you must decide based on how the page is used, whether the previously sourced value should be displayed, or if the source type should be applied anew for each page view.
>
Just an idea.
Earl

Data value not showing in added column

I have added a column to a fixed SQL query. When the application runs, the column appears in the display grid, but the value is missing.
I have added the column to both the query and display templates. I've added the column to the IlluminatorDoc, reselected the query template in the IllumSQLQuery block, and updated the configuration in the IlluminatorRow block to link the new field.
The new column appears in the Rowsets/Rowset/Column and I can see the value in Rowsets/Rowset/Row. When running the xacute query calling the BLS transaction, the new column and value is displayed in the text/html format.
Can anyone advise on why the column value is not showing in the grid?

Thank you Sam for your answer!
I had the column mapped in the display template, however, I had mapped to the query within the transaction instead of selecting the xacute query. My column names were very similar, but in taking a closer look I realized I had the wrong query. Once I selected the correct query, mapped the column and cleared the Java cache, the value then displayed.
When I right-click on the iGrid, the Data option is disabled and cannot be selected so that I can see the detail. I'm not sure how to correct this.
Thanks again!

Runtime filter values not showing

Hi all,
    I am on BW 3.5. I have a query that has a pop-up filter (i.e. a user-entry fillter that appears when the query runs) for 0MATERIAL__DIVISION. When the user uses the drop down on the filter pop-up for Division, no values appear. When the query actually appears, these divisions show up just fine. So my problem is not with the query, but in getting the values to appear in the drop down of the run-time filter pop-up. Why would that be?
   Thanks.
Dave

Hi,
       IN BI 7.0 at the side near the technical properties you have option facilities to display the filter values...
Go for F4 help on that variable at the side you will have an option to display filter values which shows history values
single values there you will have options to show all data in master data only posted for navigation
u can use master data option and get all values in master data.
Hope this helps for you.
Thanks,
Arun

AT1 value not showing in excise JV in j1ih

Similar Messages

Maybe you are looking for