Ater exporting (publishing) a project worked in Premiere Elements 12 the output / published file effects are out of alignment. In this case it is my personal video. Inside PE 12 it shows that it is perfectly centered buy after publishing it .. it is out

FYI- The effects added were cornering and crop...

JCourt
I am not sure what is happening with your thread. I found 3 email notifications in my email.
...one was a request from you to delete something that you had posted
...the other 2 looked like duplicates, relating to 720 x 480 vs 1920 x 1080 settings.
But, when I tried to open them in my email, the end result was "not found" messages.
When I came direct to the Adobe Premiere Elements Forum, they were not in your thread.
So, all we have now in your thread are
...your original post
...my post inquiring into the details of your setup
The following is what I need to know
1. What is the project preset for your project....I asked already
What did you (manually) or the project (automatically) set as the project preset which is supposed to match the properties of the source media?
(What are the details under Edit Menu/Project Settings/General...even if they look grayed out?)
Your project preset and the properties of what you bring into the project need to match.
If you are bringing in 720 x 480 4:3, then your project preset should be NTSC DV Standard.
If you are bringing in 1920 x 1080 16:9, then your project preset is one that is described for 1920 x 1080.
2. Where you are probably getting into problems, is trying to export a 4:3 import as a 16:9 end product or
trying to export a 16:9 import as a 4:3 end product.
If you confirm project preset, the properties of the source video, and what kind of export you want, I can fill
in the details of your export settings so that you can complete the task.
Thanks.
ATR

Similar Messages

Can I have two projects open on Premiere Elements at the same time? (Elements 13 for Windows)

Hi there.
Can I have two projects open on Premiere Elements at the same time?
The reason I wanna do this is because I've trimmed many hours of clips in one project (One timeline) and I want to start a new project where I have a "clean" timeline and can add clips from the
first project (Cut and paste). Or how do I bring a trimmed clip from one project into another in a easy way?
Thanks
-Dan-

Your question is in the Photoshop Elements forum. There is another forum for Premier Elements and this will probably be moved.
That said, the answer is that Premier Elements has not be designed with the ability to cut and paste from one project to another. The only "work around" is to "Publish&Share" to a best quality format that matches your project settings. You can control the output clips with the "work area bars". You can then add the new clip to the second project. The output rendering process can, at least in theory, reduce the picture quality. Depending on formats, settings and footage, it may not be noticeable.
There is a third party product called Clipmate that some say works, but not always with good results.

Will Premiere Elements 10 projects work in Premiere Elements 11?

I'm asking because i have just made 3 video projects of my baby's first 3 years in Premiere Elements 10 on Windows 7. I want to buy a new Windows 8 PC soon. Can i just buy the new Premiere Elements 11 and install that on my new Windows 8 PC and use it to open my projects, or would there be compatibility problems and therfore should i just try and install my normal Premiere Elements 10 on the new Windows 8 PC?
Thanks for your help.

Hi erocks
I'm Paul and i started this thread.
I thought this information would be helpful for you.
I have bought a brand new Windows 8 PC. It's 64 bit. My previous computer was Windows 7 x32 bit. I have successfully installed Premiere Elements 10 on my new Windows 8 computer (but needed to install the 64 bit version of the program (same serial works)).
All my Premiere Elements 10 projects that were made on the Windows 7 pc open up just fine on the new Windows 8 pc, with no issues what so ever.
I would advise you to install Quicktime too as Premiere Elements needs that to be installed too. Also, i would strongly advise you to install a codec pack too, for the video codecs, or your new computer (& therefore Premiere Elements) could well have problems reading, opening and using certain video file types. If your Windows 8 pc is 64 bit then make sure you install 64 bit video codecs as well as the 32 bit versions. This is because Premiere Elements on a 64 bit system will need to use 64 bit video codecs.
Here's a link for some codec packs. Make sure you install the 32 bit version, and if you are using a 64 bit system then install the 64 bit video codec pack as well (find it at the bottom of the codec web page).
http://codecguide.com/download_kl.htm_
P.s if you installed the extra Premiere Elements content on your old installation then don’t forget to install that too on your new pc. You can download that by logging onto your online adobe account, finding your order, and downloading from there.
Please let me know if that helped, as im quite interested to know the outcome.

Hello every body .. my ipad blocked with icloud and i dont remember the email or even birthday i've wrote I just remember the security question ... what can i do in this case to restor my email working ?? thx

hello every body .. my ipad blocked with icloud and i dont remember the email or even birthday i've wrote I just remember the security questions ... what can i do in this case to restor my email back ?? thx

Do you mean that the iPad is on the activation screen ? If it is then does it not show the first letter of your email address and the provider e.g. similar to :
If that is what you are seeing then you don't remember any email account that you had starting with that letter with that provider ? If not then do you know if you have any of the account's downloads in your computer's iTunes library : Recovering a forgotten iTunes Store account name ?
Or see if you can find it via http://appleid.apple.com : Apple ID: How to find your Apple ID
If you cant remember or find your id then you won't be able to use your iPad

Camcorders that do not work in Premiere Elements 9

I would like to compile a list of camcorders that people are not getting to work in Premiere Elements 9.
I ONLY WANT TO HEAR FROM THOSE WHO ARE HAVING PROBLEMS WITH A PARTICULAR CAMCORDER AND PREMIERE ELEMENTS 9.
I just want to list the camcorder make and model to see what camcorders are not working in the program. I am not looking for help and for those who are having problems you need to post a new thread about them.
I would like to use this list so those that have a specific camcorder will be able to see if others have had problems with getting the same model to work with the program.
PLEASE DO NOT POST HERE WITH TROUBLESHOOTING STEPS OR TO QUESTION WHY I AM DOING THIS, ONLY POST WITH CAMCORDER MODEL AND BRIEF DESCRIPTION OF PROBLEM.
I have not been able to get the Genius G-Shot HD520 to work with Premiere Elements 9, video just does not show when capturing or importing.

Hi Adobe-annoyed people
I recently installed PE9 but only tried to use today. For downloading, I have a couple of older Panasonic NV-DS60's. Neither of these camcorders worked and I thought it was a problem with the way I downloaded the software. But I get a driver error and a message informing me that camcorders used with PE9 must be capable of streaming video. Therefore I cannot load any video onto PE9 at all, so buying it was Adobe mistake No.3!!
I have uninstalled PE9 and re-installed PE7, which, although constantly crashing, at least allowed video to be downloaded. Anyone want a new version of PE9? It's as-yet unregistered.

Does dragging transitions to timeline work in Premiere Elements 11?

Hello,
If you drag a transition in the timeline between two clips, before you release the mouse button, you can place it at the left, centered or at the right of the clips (the cursor looks like a kind of flag and changes depending on the position between clips).
Theorically this should be the same than changing Alignment in Transitions Adjustments dialog box but it doesn't work to me, wherever I release the mouse button it selects Between Clips Alignment.
I'm reading Adobe Premiere Elements 11 Classroom in a book and in chapter 7 Creating Transitions it says "In the test software used while writting this lesson, where you dropped the transition did not affect the alignment shown in the Transition Adjustments dialog........".
It seems that this functionality hasn't been improved since Premiere Elements 11 was being tested.
Does anybody can tell me if this option works correctly, please?
Thanks

marcos
I should be ready soon to post my links to very detailed information on Premiere Elements video and audio transitions.
But of immediate report..
If I have two trimmed video clips on the Premiere Elements 11 Timeline and I drag the Curtain video transition to either Left Clip, Between Clips, or Right Clip, the Transition Adjustments Pop Up will appear. I find no case yet where I can stop it from appearing with the placement of the transition. And, under the circumstances described (2 trimmed clips), the auto "snap to" will be to Between Clips, and that alignment will not be changed when I click Done on the Transition Adjustments Pop Up.
All of that is in accord with the Adobe Guidelines that it has published for what to expect for transition alignment for trimmed and untrimmed clips.
If I wanted Left Clip or Right video Clip alignment, I would have had to have selected that option before I clicked Done to the Pop Up.
Do you see anything significantly different from that when you are doing the same with trimmed video clips and video transitions in Premiere Elements 11?
Thanks for the follow up.
ATR

Audio Effects not working in Premiere Elements 7

I am trying to apply some audio effects (DeNoiser, etc.) to the audio clips in my project, but when I select a clip and select and audio effect, I can't apply the effect. They "apply" button is greyed out, and if I try to drag and drop the effect onto the clip I get the universal "no" symbol on the mouse cursor.
The audio clips are linked to video clips (footage from an HD camcorder that was imported into the project). However, I also tried this with the audio and video unlinked, and the effects won't apply then, either.
Can anyone help?

I have been reading your thread and its responses with interest.
What is the brand and model of the camcorder that you are using? And, what is the file extension for the video with this 5.1 channel sound. Is your video AVCHD or HDV?
Some thoughts:
1. Premiere Elements 7 File Menu/Export/Audio will not export the Timeline video as 5.1 channel sound to Audacity, rather Stereo (2 channel).
2. I do not have an AVCHD file (or any file) with 5.1 channel sound. I have those that list 6 channel. I have found problems when I tried to export the audio from Premiere Elements when the file extension of the Timeline content was .m2ts versus .mts. For the audio derived from the .mts saved to Desktop..no problem for Audacity importing the export as .wav....for the audio derived from the .m2ts saved to Desktop, Audacity shutdown. In the latter case, Audacity seems to import the audio from the .m2ts saved to Desktop, IF the export from Premiere Elements is "Audio Interchange File Format" rather than .wav.
Also, if you have not found out already, regarding MP3 encoding Audacity, when you go to export as MP3 from Audacity, you may get the message "Audacity does not export MP3 files directly, but instead uses the freely available LAME library to handle MP3 fiel encoding."
I am looking forward to your results.
ATR

Elements 12 organizer has stopped working and premiere elements 12 get msvcr80.dll missing errors

elements 12 organizer has stopped working and premiere elements 12 gets msvcr80.dll missing errors

First deactivate the product(s) and then uninstall it from the machine using the procedure specifically for your OS. If in Windows and I suspect it is then uninstall from the Control Panel.
To deactivate the product you need to go Editor and then:
Help >> Deactivate
Please also make sure that you have your original CDs and /or DVDs handy including the necessary serial number as you will need them to install the product(s) again.
After uninstalling the products, you need to restart the machine before you start to install again.
You have created the backups of your sentimental photos, right? You need to just in case the machine causes more problems down the line.
G/L

Problem opening my project on adobe premiere element 10.

When I try to open it it says: Cannot open project because some file are damged or are obsolete. Does someone have any advice on what I could do?

Thank you, problem solved. A corrupted photo , thanks
Envoyé de mon iPad
Le 2014-04-17 à 21:08, "A.T. Romano" <[email protected]> a écrit :
Re: Problem opening my project on adobe premiere element 10.
created by A.T. Romano in Premiere Elements - View the full discussion
berthiaumes
What computer operating system is your Premiere Elements 10 running on?
Please review the following Adobe document on damaged project, if you have not already.
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-proje cts-premiere-elements.html
We will be watching as your discussion with SB moves forward.
Thanks.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6308980#6308980
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6308980#6308980
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6308980#6308980. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

Sure. Elements is cross-platform, anyway.
Mylenium

Legitimate newly purchased Premiere Elements-10 32-bit install files not available

Friends:
I purchased an $1100 Nikon camera and the deal included OEM PS Premiere Elements 10.
Legit purchase with a CD and legit Serial #.
Can't install because what is Adobe's fault, not the camera vendor's and certainly not mine.
Adobe's own published notice:
"The 64-bit version of Adobe Premiere Elements 10 only installs on Windows 7 64 bit. If you have Windows XP 64 bit or Vista 64 bit, it's necessary to install the 32-bit version. Because the Adobe Download Assistant automatically downloads the 64-bit version in error, it's necessary to download the 32-bit version manually through alternate means."
The problem is that the same holds true for installing on XP Pro SP3 and Adobe makes no mention of it in the above admission.
Then, Adobe's own Solutions 1, 2 & 3 for manual download all fail, even after fussing for days over it.
Even Solution 3, the last ditch option, fails perhaps because Elements 11 is out and Adobe has killed the 10 download Ftp sites.
Files I am unable to download from Adobe (without entrapment by so called Free Dowload sites) are:
http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.exe
http://trials2.adobe.com/AdobeProducts/PRE/10/win32/PremiereElements_10_LS15_win32.7z
How can I solve my dilemma, being denied my right to learn Elements from a legally purchased 10 and being
forced to purchase 11 instead on top it. Fair?
I am requesting Adobe politely to make it possible to download the Adobe recommended two files withou hassles.
I must mention in this context my own (and thousands of others') sad experience with Flash updates. Just follow
my own (and others') posts in Adobe forums. Plus, just read the Internet posts along these lines:
"It's impossible to download anything from Adobe. I have given up and I have given up on Adobe products."
Not that I want to, but I am forced into echoing the same sentiment.
Can anyone help, please ?
Thanks,
Pradip A.

Hello Mr. Wright:
The download now works. Appreciate your help.
The ...7z file is 1.37 Gb long. I have super high speed Fibre Optic Internet connection with Bell. I rarely have the ocassion to download files of this size. After downloading more than 1 Gb, the transfer hung - either at the Client end, or at the Server end. Bell is sending tech Thursday to mitigate some line noise they detected. Hopefully, the stars will fall into the right place before long.
Regards,
Pradip Acharya
Date: Tue, 13 Nov 2012 11:54:11 -0700
From: [email protected]
To: [email protected]
Subject: Legitimate newly purchased Premiere Elements-10 32-bit install files not available
Re: Legitimate newly purchased Premiere Elements-10 32-bit install files not available created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You can find the 32-bit installer at http://prodesigntools.com/photoshop-elements-10-direct-download-links- pse-premiere-pre.html. Please make sure to complete the Very Important Instructions section prior to clicking on the link to download the file.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4844309#4844309
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4844309#4844309
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4844309#4844309. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
If so how do I accomplish this act?
Are their additional menus available for Encore CS4?

The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
Good luck,
Hunt
PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

I need help installing my adobe premiere element 13. the soft ware is 3.5 GB and I have a 654.4GB space is this enought space to dowload the software. It appears the software is downloading , but when it gets to the end it gives me the error summary messa

I need help installing my adobe premiere element 13. the soft ware is 3.5 GB and I have a 654.4GB space is this enought space to dowload the software. It appears the software is downloading , but when it gets to the end it gives me the error summary message. I have been on the phone for hours being transfered from from person to the next with no results.

reesep
This is not Adobe. Rather user to user. The Adobe Staff and PRE_help presence in this forum is undefined.
The replies from here are not instantaneous. But, your fellow users all try to respond as timely as possible.
What is your computer operating system?
From where are you downloading Premiere Elements 13....direct from Adobe as the tryout or the purchased product? If the purchased product, do you now have a purchased serial number to go with the installation files?
Where are you stopped in the installation....at the Sign In or before? Is the faulting module cited in any messages? What are the error messages?
The usual questions:
1. Are you working with the antivirus and firewall(s) disabled?
2. Are you running the computer programs as administrator?
3. Are you working with a pen and tablet device instead of mouse?
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
5. Are you installing the program to the default location on the Local Disc C (if Windows).
Let us start here and then decide what next based on the details that you post. Subsequent troubleshooting may include:
deletion of the Adobe Premiere Elements Prefs file and/or uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I am on windows 8 platform, i used adobe elements to work on my image - the output is in dng format, how do i convert this to jpg format?

i am on windows 8 platform, i used adobe elements to work on my image - the output is in dng format, how do i convert this to jpg format?

When you make a DNG that's like making another raw file, so you will need to convert the DNG file just like your original raw. Don't use the Save button in the raw converter. That's just a link to the DNG converter. Normally you would click Open instead and then save in the editor as a jpg or other image format of your choice.

Junk Characters in the output XML file after Parsing

Hi
I am using DOM parser to parse an XML file.
After parsing the input XML file, i am fetching some contents
from the same and also putting the same contents in the parsed output file which is also an XML file.
The problem here is that the after putting the contents to the output XML file from the input XML file,
some junk character appears at the end of each and every tag in the outputfile.
The junk character is some thing like this : " ampersand hash thirteen and a semicolon "
(*THE MESSAGE DID NOT ACCEPT THE SYMBOLS KINDLY TRANSLATE THE ABOVE WORDINGS*
INTO SYMBOLS)
This character gets appended at the end of each and every tag in the output file due to which the output file
is not recognised as an XML file.
Please let me know as to why is this character appearing and also please suggest some solution
for the same.
-Thanks in Advance.
Edited by: itskarthik on Oct 10, 2008 7:16 AM
Edited by: itskarthik on Oct 10, 2008 7:18 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM

Wierd.
Try this piece of code. (You can always change it to use input file and output file instead of string if you want)
What is your output?
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
public class XMLTest {
     public static void main(String[] args) throws Exception {
          String input = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n" +
                              "<test>\r\n" +
                              "</test>";
          System.out.println("Input:");
          lookForCR(input);
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          Document doc = factory.newDocumentBuilder().parse( new ByteArrayInputStream(input.getBytes()) );
          Source source = new DOMSource(doc);
          ByteArrayOutputStream bArrOut = new ByteArrayOutputStream();
          Result result = new StreamResult( new StripOutputStream( bArrOut ) );
          Transformer xformer = TransformerFactory.newInstance().newTransformer();
          xformer.transform(source, result);
          System.out.println("\nResult:");
          lookForCR(bArrOut.toString());
          System.out.println("\nDone");
     public static void lookForCR(String input) throws Exception {
          char[] chars =input.toCharArray();
          for ( char chr : chars ) {
               if (chr == 13 ) {
                    System.out.println("Has 0x0D character!!");
class StripOutputStream extends OutputStream {
     OutputStream out = null;
     public StripOutputStream(OutputStream out) {
          this.out = out;
     @Override
     public void write(int b) throws IOException {
          if ( b != 13 )
               out.write(b);
}- Roy

Ater exporting (publishing) a project worked in Premiere Elements 12 the output / published file effects are out of alignment. In this case it is my personal video. Inside PE 12 it shows that it is perfectly centered buy after publishing it .. it is out

Similar Messages

Maybe you are looking for