ATI driver - can't find kernel module

I downloaded catalyst and catalyst-utils like the wiki said, and then I went.
[lewis@1711 lib]$ modprobe fglrx
FATAL: Module fglrx not found.
Which begs the question...lolwut? The whole purpose of the catalyst package was to install the module.

If you are running the 2.6.31 kernel you will have to uncomment the following line in the pkgbuild
# Uncomment the following line if you are using kernel 2.6.31
# patch -p0 < 2.6.31.patch
you will also probably have to blacklist !radeon in your daemons array

Similar Messages

Nvida driver - can't find nvidia module

Finally went out and bought an nvidia geforce 6600Gt video card.
But guess what now I can't install the dam thing.
I followed the arch wiki but all I get is
Installation starts now ...
FATAL: Module nvidia not found.
If you need more information about setting up nvidia drivers have a look at:
"http://wiki.archlinux.org/index.php/How to install NVIDIA Driver"
modprobe nvida gives the same results. I thoght pacman -S nvida is supposed to install the kernel modules so how com e it can't find them ?
I even created a /usr/src/linux symlink to the current kernel - still not working. So what's going on I thought nvidia drivers were supposed to be really easy to install ????

The error message when I run pacman -S nvidia is shown in my first post.
I do not have a custom kernel I have pacman -S kernel26 (kernel-2.6.11.3-ARCH)
Do I need to install kernel full kernel sources with ABS for nvidia to work ?
I did try this but he kernel failed to build (can't remember why now)
Here's the last part of nvidia-installer.log incase that helps
usb-storage: device scan complete
Disabled Privacy Extensions on device c05d68a0(lo)
lp0: using parport0 (interrupt-driven).
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: version magic '2.6.11.3-ARCH SMP preempt K7 gcc-3.4' should be
'2.6.11.3-ARCH SMP preempt 686 gcc-3.4'
nvidia: version magic '2.6.11.3-ARCH SMP preempt K7 gcc-3.4' should be
'2.6.11.3-ARCH SMP preempt 686 gcc-3.4'
nvidia: version magic '2.6.11.3-ARCH SMP preempt K7 gcc-3.4' should be
'2.6.11.3-ARCH SMP preempt 686 gcc-3.4'
nvidia: version magic '2.6.11.3-ARCH SMP preempt K7 gcc-3.4' should be
'2.6.11.3-ARCH SMP preempt 686 gcc-3.4'
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.

[Solved] Can't find usbnet module in stock kernel

Hi,
I was trying to get USB tethering to work, and found that I don't have the "usbnet" module. Pkgfile tells me that linux and linux-lts both provide usbnet, but I can't find the module (in /usr/lib/modules/...) at all (I'm on the 3.6.10-1 kernel, just reinstalled it from the repositories to make sure). I checked the file list of the 3.6.9-1 kernel that I had in pacman's cache, and the module wasn't there either. Does anyone know why I'm not getting this module with my kernel?
Last edited by Ploink (2012-12-29 16:00:42)

pacman -Ql linux | grep usbnet
linux /usr/lib/modules/3.6.10-1-ARCH/kernel/drivers/net/usb/usbnet.ko.gz
Edit: oops, I see you said you checked the file list. Sorry, I typed faster than I read. If you do not get similar output to this, then the linux package isn't properly installed.
Last edited by Trilby (2012-12-29 14:31:32)

Larch "couldn't find kernel modules"/"unexpected kernel files"

Hey guys,
I'm using `larch` to build an Arch Linux live ISO. I made it through the Installation part, however I can't get through "Larchify" (whatever that means). Here's the log:
##Initializing larchify process
>>rm -f /home/Kiwi7/larch_build/.larch/system.sqf
>?0
>>rm -rf /home/Kiwi7/larch_build/.larch/larchify
>?0
>>mkdir -p /home/Kiwi7/larch_build/.larch/larchify/overlay
>?0
##Seeking kernel information
##(WARNING): More than one kernel found:
vmlinuz-linux-aufs_friendly
vmlinuz-linux
##(WARNING): No kernel version file (/home/Kiwi7/larch_build/etc/mkinitcpio.d/linux-aufs_friendly.kver)
##Unexpected kernel files at /home/Kiwi7/larch_build/lib/modules/extramodules-3.12-aufs_friendly
?>WARNING:
You seem to have installed a package containing modules
which aren't compatible with your kernel (see log).
Please check that this won't cause problems.
Maybe you need the corresponding package for your kernel?
Continue building?
??YES
#>Yes
##Unexpected kernel files at /home/Kiwi7/larch_build/lib/modules/extramodules-3.13-ARCH
?>WARNING:
You seem to have installed a package containing modules
which aren't compatible with your kernel (see log).
Please check that this won't cause problems.
Maybe you need the corresponding package for your kernel?
Continue building?
??YES
#>Yes
##(WARNING): More than one kernel module directory found:
3.12.6-1-aufs_friendly
3.13.4-1-ARCH
!>Couldn't find kernel modules
Please help me out.

Kiwi7 wrote:I can't get through "Larchify" (whatever that means).
Hmm... personally I would never run any command without understanding what it does, but it's your funeral, I guess.
Apart from that, are you sure larch is still compatible with Arch? It's nearly four years since the last update in the larch git repo, and as I'm sure you know, Arch changes frequently. I'd suggest you try to contact the developer directly.

In which folder of my Seagate 3TB external hard drive, can I find my iPhoto photos from my iMac (iOS X Maverick)?

In which folder of my Seagate 3TB external hard drive, can I find my iPhoto photos from my iMac (iOS X Maverick)?

tlah wrote:
The Seagate 3TB external hard drive backs up the entire internal hard drive of the iMac.
Is this external drive a Time Machine backup?
Then find what you want using Time Machine (or whatever application you used to make the backup).
Your iPhoto pictures are in the iPhoto library in Users/Pictures.

Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
I've tried all the options suggested and the problem continues.
What else can I do?
Note: I had already worked before.
Windows 8.1
Notebook i7, 8M memory, video card Nvidia (updated).
Adobe Premiere Pro 2014
Please help me. Thank you.
mailto: [email protected]

Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
http://kb2.adobe.com/cps/324/324938.html
I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
Hope this is of some assistance.

[SOLVED] pacman -Syu on 10/17/2012, systemd can't load kernel modules

Ok, I did a [pacman -Syu] on my laptop, and everything went well. So I decided to upgrade my PC as well, did a reboot and then couldn't ssh into it.
Had to access the machine, and found
# systemctl --failed
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
[email protected] loaded failed failed dhcpcd on eth0
httpd.service loaded failed failed Apache Web Server
systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
3 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
so it failed to load kernel modules...
# systemctl status systemd-modules-load.service
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Wed, 17 Oct 2012 18:27:11 -0400; 45min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 102 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/systemd-modules-load.service
Oct 17 18:27:11 MyHost systemd[1]: Failed to start Load Kernel Modules.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
... then I checked network devices
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
# ip addr show dev eth0
Device "eth0" does not exist.
... then the modules; and I saw that none appeared for the Ethernet...
# lspci -v | grep Ethernet -A8
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
I/O ports at fc00 [size=8]
Capabilities: [44] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
... whereas they did for other devices
# lspci -v | grep Kernel
Kernel driver in use: ohci_hcd
Kernel driver in use: ehci_hcd
Kernel driver in use: sata_nv
Kernel driver in use: sata_nv
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: nouveau
I'm guessing it's probably something with the new image after the pgrade, but I don't know which module to load nor do I
understand why systemd isn't loading the modules when it was working stable enough to act as a headless server before. However, I've only been a week or so with systemd and might have overlooked something in the configs. Any help or insight would be greatly appreciated. Please. I'm desperate.
Last edited by confusion-is-my-sedative (2012-10-26 21:30:01)

Yep, I got that far, and tried the same advice from a different user with a 'tee' command which did the same thing, but unfortunately the forcedeth module can't be loaded because its in a different directory than the 'uname -r' specification allows modprobe to search for. I posted my attempts here: https://bbs.archlinux.org/viewtopic.php?pid=1181940

IPW2100 driver can't load the module

Hi everybody,
I have an centrino Dell Inspiron 8600 and I'm trying to make working wireless hardware. I noticed that the installing of the ipw2100 with pacman produces a new directory in the /lib/modules
It's different than my kernel, seems stock kernel directory,
I'm using a compiled kernel and when I try to load the module it doesn't load it and all I see are just a couple of warnings.
My questions are:
Have I to use an stock kernel?
If yes where can I find some HowTo that explains how to use it?
(I don't like 800x600 terminal, by compiling I can decide to use 1024x768)
If not, have I to use source? I seems strange, I mean, what's pacman for? :?
Thank you guys

Ok, I used abs to compile my new module, now I have my module in the right place.
but when I try to load it happen this:
[root@sanctuary arael]# modprobe ipw2100
FATAL: Error inserting ipw2100 (/lib/modules/2.6.11/kernel/drivers/net/wireless/ipw2100/ipw2100.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[root@sanctuary arael]#
dmesg output is this:
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
hStart = 1328, hEnd = 1360, hTotal = 1440
vStart = 802, vEnd = 808, vTotal = 823
h_total_disp = 0x9f00b3 hsync_strt_wid = 0x4052a
v_total_disp = 0x31f0336 vsync_strt_wid = 0x60321
pixclock = 14035
freq = 7125
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
[root@sanctuary arael]#
Slightly OT, but in the interest of getting you back to the stock kernel - it shouldn't be necessary to recompile the kernel simply to change screen res. What prompted you to do it?
When I use stock kernel I can't recompile it...I mean it's precompiled ... or not? :?
To have 1024x768 login shell I can specify during "make menuconfig ncurses screen"... But when I use stock kernel what should I to do, pass to lilo right parameters? Othervise the default is 800x600 and I don't like it to much...but this is just my preference...and is not important...
Using ipw2100 and kernel26 precompiled does't change the situations. I have my module in the right place but modprobe says that there isn't a module called ipw2100...
To use linux I guess that people should be very smart or a guru...and supose that this is not too much my case. :?
I have also an hp usb printer that doesn't works and I don't understand why. I have to use windows to print. It's very frustrating have hardware but not be able to make it work....

Importing CD's to external hard drive-can't find folders...

I'm importing CD's to an external hard drive, but I can't find the folders. I've changed the Folder Location to the external drive, and I'm not copying them into the Music Folders. They don't seem to be saved on the external drive, nor are they in the Music Folder in the internal Hard Drive. They're playing OK, even though a few full CD's are not automatically playing unless I find their original location.
Should I load the iTunes.app into the External drive? How can I ensure that the songs are loading on the external drive and not the internal drive? If they are saved on the internal drive, how can I transfer them to the external drive, and have them play regularly? I have this external drive for the exclusive purpose of saving my music, and I'd like to import quite a few more cd's, but I'm waiting to make sure that I'm doing it correctly.
Thank you, in advance.

I appreciate your help, but I realize that I need to be more specific.
I burned several CD's onto my orginal Mac Hard Drive. Weeks later, I added the external hard drive via a USB port. Then I copied the iTunes Music Folder (the original music files) to the external Hard Drive, and put the original into the Trash. Now when I import new CD's, it saves them to my external drive by default, which I chose through--Change Folder Locations. All of this is fine, it's what I want.
1) When I choose iTunes, and go to the Library, all the songs are listed, original and new. However, it won't play all of the songs. It asks to find it in the original location, but only a few of the folders are listed, a few of the originals and all of the newly imported CD's.
2) When I import new CD's, how can I be assured that it's saving them on the external drive only. If the CD takes, let's say 500MB, it doesn't seem to register as taking up 500MB of space on the external drive.
What does consolidating the Library mean?
I know it may sound complicated, but I feel it's an easy problem to alleviate, and I'm missing some simple step.
Again, thank you in advance.

Can't find s:Module

Hi everyone:
I just can't find the <s:Module>, is there any chance to use <s:state> and <s:transitions> in <mx:module>
It is very strange..
thanks

Not everything is available at the moment in spark but over time more and more mx functionality will end up in the spark set. FB2 is much better at dealing with the mixing of mx and spark and this will keep improving as bugs are ironed out
<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo" layout="absolute" width="400" height="300">
<fx:Declarations>
<s:Animate />
</fx:Declarations>
<fx:Script>
<![CDATA[
]]>
</fx:Script>
</mx:Module>
the above is the basic mx module it still will allow you to mix spark and mx, so yes you can use mix and match, the caveat being that at the moment you may run into some issues but thats what testing is all about. If you have any problems you can always put your code up for others to look at, if it is a compatibility issue then it can be listed as a bug.
David.

Audigy 2 ZS Platinum - Software tells me to update driver, can't find newer dri

Hardware: Audigy 2 ZS PlatinumDriver: version 5.2.4.96Creative MediaSource DVD-Audio Player: version 2.00.75?I recently purchased a new DVD-Audio title, and when I insert it into the?dri've and open Creative MediaSource DVD-Audio Player I get the following message:?"Your software needs updating to be able to play this DVD-Audio title. Please visit www.creative.com to get the latest driver release."?According to auto-update and my manual search, I have the most recent version of both the DVD-Audio player and the driver. I reinstalled the driver just to be certain, but I still get the same message. Is there a newer driver release and I am simply looking in the wrong places? Is there something else I need to download to let me listen to this title?As I've opened the media I cannot return it, and I do not have another DVD-Audio player to test it in. This seems like it should have a simple solution, but I can't find it. Any help would be appreciated. Thank you!

I just recently encountered this issue as well. According to an Apple Support article you can not use Migration Assistant from a computer using Tiger (OSX 10.4) to a computer using Mountain Lion (10.8) You must use file sharing and then copy the files you want to migrate on the new computerHere is the article address
http://support.apple.com/kb/HT4889
Look to the bottom of the article in the Additional Information section and follow the link.

Can't find this module. Please help!

I want to edit this module, but can't find it on the Module Template, Content Holders nowhere...
module_productfeaturelist,featured,100,Default,,true
Please help. Thank you!!

Hello,
That module is detailed here: http://kb.worldsecuresystems.com/134/bc_1345.html - search for module_producfeaturelist
Specifically, the last parameter determines which layout it used. If it's set to true, the small product backup layout is used - and you can find that under Module templates - > Online Shop layouts. Or if you're using FTP, under Layouts->online shop.
Thanks,
Florin Carlig

Can't find output module

I cannot get the module to work on Bridge. I am using a Mac. Bridge version 6.0.1.6
I followed the instructions to put it on very carefully but cannot find it in my bridge window. i have put a screenshot of my window here. I checked as per some suggestions that I had checked the option in 'Startup Scripts' in Bridge preferences. I can see the AOM folder in the Bridge CC Extensions folder so I really don't know why I can't find it in Bridge

Hi Diego:
In your Mac Pro the Apple Prores codecs are available in the render options and in the Mac Book Pro don´t?
(Speedgrade has got several presets like Cineon, Prores4444, TGA, DPX or AJA by default in the render tab, but you can change and save your presets and export codecs if you like.
There are a "Other" button in the "Options and Format settings" in the render tab. You can select the "Other" button to look several options and change the codec in the Quicktime tab settings)

Optical Drive can't find Adobe Creative Suite 6 disc

As written in the topic, my optical drive can't seem to find my Creative Suite 6 Master Collection disc.
(I am using Windows 7 Ultimate)
Every other disc I tried from BD to DVD-ROM or even CD-ROM worked perfectly fine.
The disc itself is in a good condition (no scratches and such) when I try to open it manually it sais "no disc found" and the drive opens itself so I can insert a disc.
When I tried to force autorun with "run" it gave me the same message "no disc found".
Anyone with ideas how to solve this problem?

download the installation files.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

[cisco VPN] Can't build kernel module with 2.6.9-ARCH

I need to setup a vpn tunnel to my university in order to gain acces to their resources and be able to surf when I am on the campus. With 2.6.8.1 I used the Cisco VPN client 4.0.5 k9. After my upgrade to 2.6.9 I had to rebuild the module, but now it fails to build. Anyone knows how to solve this? Or does anyone know another vpn client that is compatible with Cisco. This piece of software is essential to me. Please help. Here is the output:
Cisco Systems VPN Client Version 4.0.5 (Rel) Linux Installer
Copyright (C) 1998-2001 Cisco Systems, Inc. All Rights Reserved.
By installing this product you agree that you have read the
license.txt file (The VPN Client license) and will comply with
its terms.
Directory where binaries will be installed [/usr/local/bin] /usr/bin
Automatically start the VPN service at boot time [yes] no
In order to build the VPN kernel module, you must have the
kernel headers for the version of the kernel you are running.
For RedHat 6.x users these files are installed in /usr/src/linux by default
For RedHat 7.x users these files are installed in /usr/src/linux-2.4 by default
For Suse 7.3 users these files are installed in /usr/src/linux-2.4.10.SuSE by default
Directory containing linux kernel source code [/lib/modules/2.6.9-ARCH/build]
* Binaries will be installed in "/usr/bin".
* Modules will be installed in "/lib/modules/2.6.9-ARCH/CiscoVPN".
* The VPN service will *NOT* be started automatically at boot time.
* Kernel source from "/lib/modules/2.6.9-ARCH/build" will be used to build the module.
Is the above correct [y] y
Making module
make -C /lib/modules/2.6.9-ARCH/build SUBDIRS=/home/luk/sources/vpnclient modules
make[1]: Entering directory `/usr/src/linux-2.6.9-ARCH'
CC [M] /home/luk/sources/vpnclient/interceptor.o
/home/luk/sources/vpnclient/interceptor.c: In function `add_netdev':
/home/luk/sources/vpnclient/interceptor.c:59: sorry, unimplemented: inlining failed in call to 'supported_device': function body not available
/home/luk/sources/vpnclient/interceptor.c:245: sorry, unimplemented: called from here
make[2]: *** [/home/luk/sources/vpnclient/interceptor.o] Error 1
make[1]: *** [_module_/home/luk/sources/vpnclient] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.9-ARCH'
make: *** [default] Error 2
Failed to make module "cisco_ipsec.ko".

I modified the pkgbuild posted here by someone (thank you!) so it includes all relevant files (meaning also vpnc-connect and vpnc-disconnect and vpnc.conf).
pkgname=vpnc
pkgver=0.2
pkgrel=1
pkgdesc="Client for Cisco3000 VPN Concentrator"
url="http://www.unix-ag.uni-kl.de/~massar/vpnc/"
license="GPL"
depends=(libgcrypt)
source=(http://www.unix-ag.uni-kl.de/~massar/vpnc/vpnc-0.2-rm+zomb.1.tar.gz)
md5sums=(ded67de747874c4245ed8405146dc94a)
build() {
cd $startdir/src/vpnc-0.2-rm+zomb.1
# We want the CFLAGS specified in makepkg.conf to be used
mv Makefile Makefile.old
sed -e 's/-W -Wall -O -g/$(MYCFLAGS)/g' -e 's/LDFLAGS=-g /LDFLAGS=/g' Makefile.old > Makefile
export MYCFLAGS=$CFLAGS
make
install -d $startdir/pkg/usr/sbin
install vpnc $startdir/pkg/usr/sbin
install vpnc-connect $startdir/pkg/usr/sbin
install vpnc-disconnect $startdir/pkg/usr/sbin
install -d $startdir/pkg/etc
install vpnc.conf $startdir/pkg/etc
Guess what, it works
I can reproduce my steps.
- makepkg
- pacman -A vpnc-xxxxxx.tar.gz
- add tun to the daemons array in rc.conf
- Modify /etc/vpnc.conf
- vpnc-connect

ATI driver - can't find kernel module

Similar Messages

Maybe you are looking for