ATI tv-out with xorg7 [solved]

Hi everybody.
I have a problem with tv-out on my ATI card since upgrading to xorg7. When I connect the card to my tv I can see the desktop but when I try to play a movie I get just a blue screen where the video is supposed to be.
DRI and other things work fine. I have a Mobility Radeon 9700 using the 8.22.5 driver and fglrxinfo shows:
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 2.0.5642 (8.22.5)
It is probably a VX thing but I have no idea how to solve this problem. Any ideas?

Thanks for the tip, but the problem actually was that I did have those lines in my xorg.conf. When I deleted them it started working.
If someone else is having this problem in a similar configuration, here is the device section from my xorg.conf.
Section "Device"
Identifier "** ATI Radeon"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "UseInternalAGPGART" "no"
Option "NoTV" "no"
Option "TVStandard" "PAL-D"
Option "TVHSizeAdj" "4"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "4"
Option "TVHStartAdj" "2"
Option "TVColorAdj" "255"
EndSection

Similar Messages

  • AirTunes cut-outs with wired network (solved)

    To whom this may be helpful,
    There are several discussions about Music cut-outs when using the AirTunes, but all of these discussions were focussing on a wire-less connection.
    In my case, however, I have a wired Ethernet connection from my Mac to a 4-port-router, to which the AirPort Express is also connected. I got the first cut-outs about a year ago and it has been gradually getting worse, up to the point where it would cut out after every 5-10 seconds, pausing for 5 seconds. This is when I gave up using AirTunes.
    Next, nothing much happened until I noticed a few weeks ago that my network had become notoriously slow. I first suspected a degrading ADSL connection, but I changed my mind when my router died. It turns out that my network performance was gradually degrading due to problems in my router (probably bad memory, forcing it to drop packages when the checksums were incorrect).
    After having replaced the router, the network is up and running again as before and AirTunes runs smoothly again. With that in mind, you might like to test other units in your network!
    Mac G4   Mac OS X (10.4.9)  

    I buyed 2 of the Airport Extreme, never got them working fine, till yesterday...
    I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
    I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
    In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
    I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
    I hope this will help others with the cut or drop out problem

  • Help....I'm tearing my hair out with BT's cutomer ...

    If you think you have heard everything on this forum…read this sorry tale of bad customer service! [Sorry for the length of the article, but I could not put the whole thing into less words!]
    We moved house about 8 months ago, and had our phone line/broadband and BT Vision service moved to our new address. Everything went like clockwork, and BT did exactly as promised.
    We moved again 2 weeks ago, and again everything went without a hitch, all our BT services were moved as promised on the right day, and I was telling everyone how great BT were …..but then it all went wrong!
    Two days after the move I received an e mail from BT saying they understood I had decided to go with another provider, and they were therefore cutting my services off that day. I immediately got on the phone to BT and explained that I had not spoken to any other provider, had been a BT customer for over 40 years, and was very happy with their service. After been passed around from pillar to post, from the UK to India, back to the UK, back to India and then back to the UK, [after 1 hour and 50 minutes on the phone!!] I eventually got through to someone at their Newcastle office, and when I explained everything to him, for the fifth time!, he said he did not know how this could have happened, and could not tell me who this other provider was, but would pass this case on to someone to investigate as it appeared that my address listed with them was the one I had before the previous move 8 months ago, and in the meantime he said he would cancel the order so as not to disconnect my services. It appeared to me as though someone at BT had never updated my details after my original house move, but as everything seemed to be working perfectly at our new address, I was not unduly concerned….after all BT had been sending me a paperless bill for the last 8 months, which I had been paying, and indeed on the day of my phone call I had just received the bill for the next month’s charges in advance. They had also sent letters through the post to me previously at the two previous addresses, and my new address, to confirm the house moves, so I could not understand why they would not have my new address, as they had just written to me there!
    I decided to send an e mail to BT Customer Services, just to confirm in writing everything that had gone on, and was promised a reply within 24 hours.
    Four days later, I got a phone call from BT staff in India, saying he was responding to my e mail. He  then tried to sell me a new BT phone/broadband and TV package as he again said I had gone with another provider, and quoted a much higher price than I am currently paying!!. I explained again what had happened, that my line rental was paid in advance for 12 months, and my broadband and TV account was paid up to date, everything on my account [phone line, broadband and BT Vision] was all working without a problem and that I had never spoken to any other provider because I was happy with the service from BT. After another 30 minute conversation, he obviously could not get his head around my situation, so suggested that I contact the other provider, and tell them that I wished to cancel the contract with them. I asked him who this other provider was, and he said he did not know. I then asked how he expected me to contact them if neither he nor I know who this was. This seemed to leave him speechless, as he had not come across a situation such as mine before and obviously had no script sheet to deal with this problem. He could not offer any further assistance
    As everything was continuing to work without problems, I did not pursue the matter further.
    Today, I decided to order a BT Sport Card for my Vision Box  and went on line to order it  because the phone number given to me, said they were so busy with new business that they could not take any calls, and it was therefore necessary to order it on line. When I tried to do this, guess what happened…..I was told I did not have a phone line with BT!!! ….even though I was using their broadband to contact them!!!
    After calming down for a couple of days, I decided to ring BT on their dedicated Sport phone line, and got hold of a very helpful girl in the UK, who tried to process my order, but came up with the same problem….they had no record of me having a BT phone line. When I explained to the girl that I was actually speaking to her on their BT line, she went away to talk to someone and after a few minutes came back and said she could not process my order for a card, and an investigation would have to be made to find out exactly why I was showing on their records as not a BT customer. She promised that the investigation would be dealt with within a week.
    A week later, [13/8 ] after hearing nothing further, I contact the BT Sport phone number again, and relayed everything that had gone on previously. After looking at my file again, they now decided I that my account slammed [this is the term apparently, when another provider takes over your phone account, without your permission] He said that my account could be reinstated with BT if I wished, but that it would take till 22/8 before this could be actioned for some reason. He also found that I now had 2 accounts with them….one in my name at my current address for BT Vision, and another account in someone else’s name at the address I lived at two houses ago in someone else’s name for the phone line and broadband. As everything was working at my end, I had to accept this. I did ask why, if another provider had taken over as he suggested, why had I no knowledge of this, having not spoken to anyone else or had correspondence from anyone else….and what therefore did another provider have to gain?.....he could not give an explanation . I asked for confirmation by e mail, that my account would be reinstated on 22/8 on the same terms as I had previously had, and he agreed to do this within 24 hours. [ of course no e mail has arrived!]
    Also I forgot to ask BT, if another provider had taken over my account, why were BT not asking me for compensation to cover the eight months of my 12 month contact with them which still had to run, which I understand would be about £225?...which leads me to think that this problem is nothing to do with another provider taking over my service, but much more likely a c!!k up within BT own set-up.
    As I said earlier in this piece, I have been a loyal BT customer for over 40 years. I have always stuck with BT, despite the fact that their price is one of the highest, and that more attractive offers keep coming through my letter box and through the media all this time. I am now wondering where I go from here. I do not want to spend more hours on the phone, being past from one department to another, without the matter being resolved. I cannot believe that a company such as BT which is all about communication can be so difficult to communicate with….and as for their customer services set up….who can afford to spend hours on the phone these days!.
    BT take notice, you need to have more staff, who are better trained in product knowledge on your customer service phones, so that customers are not just past from one department to another, spending hours on the phone getting nowhere!
    As a final insult….today, the 23rd August, I have just gone on line to see if my phone line is shown as active with BT for the purpose of obtaining a BT Sport Card, as promised…..you guessed it….still showing that I do not have a line with BT even though everything is working correctly at my end!
     I will certainly be looking around this time when my 12 month contact expires.
    Solved!
    Go to Solution.

    I just thought I should post this comment, to say my long running problem has finally....FINALLY been sorted out!
    It was actually really fixed at the end of September, but I have waited till now, until I received my first proper bill to feel confident enough to say it is finally sorted out.....but what a long winded process!...it took over a month to sort this out, with endless hours on the phone, and endless promises not kept.
    The problem with BT's customer service is the fact that going through normal channels, no one person can sort a problem out. You get passed from pillar to post, with every department saying that it is someone else's area of responsibility and then it takes hours on the phone with various deparments in different countries, to get a commitment to sort it out, and then nothing happens!
    It was only after posting my final desperate plea on this forum, for all the world to see, that I finally got one of the Moderators to take up my case, and sort the problem out, although it took him over a month to get through all the treacle of BT's admin before a solution was found.
    I am very greatful to the Mods for dealing with my problem, which was not of my making, but was due to something going wrong with BT's system.
    There is however something fundamentally wrong with BT's Customer Service set up, where no one person seems to take responsibilty for a CXXk-up on their part, and seems unable to have the authority to sort it out.
    Once again, Thank you Mods for your help.

  • Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

    This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
    attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
    and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
    are greatly appreciated.

    Hi,
    Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
    Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
    So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
    Hope this helps.
    Best regards,
    Justin Gu

  • HT4623 I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • When i am printing labels with color, the letters all come out with a gray shadow

    when i print labels in color, all ofthe letters come out with a gray shadow (or ghosting) around them...how can this be corrected?  i contacted HP support and they were of no help.

    Hi there @kthlvac , welcome to the HP forums!
    The printer may be having print quality issues as per your description. Please reply to me with which printer model you have and I will look for a troubleshooting guide for you.
    Also tell me what troubleshooting you have already tried when you called HP's technical support.
    How Do I Find My Model Number?
    Thank you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Can I find out, with user has deleted all cost estimates with CKR1?

    Hi Community,
    ich have a major problem: all our standard material don't have a cost estimate any more, because a unknown user has deleted all current cost estimates. Can I find out, with user has used the CKR1 transaction? And much more importend: how can I solve the problem? Do I need to re-calculate all the material?
    Thanks for any idea and help
    PoD

    Hi,
    you have to make the costing run, marking, releasing again but thats not the whole work.
    If there are PP-orders that have been created based on the old/deleted plan cost estimates, the variance calculation will not work as the plan cost estimate is missing (even if the new one is released in the same period).
    Thus variance calculation is not possible for those orders... You have to settle the whole balance to receiver object by removing the variance key in PP-order. Try first for one particualr order to see if there are some other problems that need to be solved during month-end-closing.
    How to find out who has executed CKR1 (SAPCKR1): Check authorizations for (hopefully) a small number of user who are allowed to use CKR1.
    Use T-Code ST03N, in the left upper window double-click "total" (maybe click a day if you can imagine which (possible) date it was). In lower left section open "user and settlement statistics" and then click "user profile". Now go to each possible user and look for T-Code CKR1.
    This can be time-consuming but its worth a try...
    For the future: restrict CKR1 to a very small number of user (and they should be well trained...). I once had a company (with poor authorization concept) but CKR1 was blocked in SM01 and a ZCKR1 was created and in this Z-transaction USER-name was checked (if SY-USNAM...) so only the use names named in this Z-program were allowed to use ZCKR1. Not the best way but sufficient for them...
    Good luck, Christian

  • İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    İ have an hp 3052 all in one.how can i get print out with ipad or iphone?

    Hello,
    Try following the instructions here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    If that does not help, let me know and I will see what I can do.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How to access the activities created by an enduser especially when the enduser has left the organization?Please help me out with the possible solution

    How to access the activities created by an end user especially when the end user has left the organization?Please help me out with the possible solution

    Hi Ramesh,
    In the web UI we have business role IC_manger where you can search the activities based on employee responsible and you can use business transaction assignment functionality to assign those activities to any  other end user or team.
    Else you can also use Agent inbox functionality if you have configure the agent inbox for those activity.
    Hope this helps solving your query

  • Issues getting on the net with wlan0 [SOLVED]

    Hello!
    I've managed to be able to see my network (if that count's for anything) but can not get on to it.
    I installed netcfg, went in to /etc/network.d/examples/wpa.example and entered in all of my details - I then cp'd that over to /etc/networkd.d/   - it's just been renamed to wpa.
    I now dhcpcd wlan0 but it just gives me "already running on pid 2546" so i kill 2546 && dhcpcd wlan0 and it times out with warn - using IPV4LL address 169.254.40.16.
    I have also tried iwconfig wlan0 Tony passkey    - but that also does not work. Spitting out "Tony : command not found: - however, the archwiki says to enter it this way.
    iwlist wlan0 scan | less comes out with master netgear and Tony - both the same. Tony looks a bit like -
    Cell 02 - Address: 00.14.6C.AC.6E.8C
    ESSID: "Tony"
    Mode:Master
    Channel:11
    Frequency:2.462 GHz (channel 11)
    Quality=55/64 Signal level=23/65
    Encryption key = On
    IE: WPA Version 1
    Group cipher : TKIP
    Pairwise Ciphers TKIP
    Auth Suites : PSK
    Any help would be much appreciated.
    Last edited by Blindraven (2009-10-15 01:37:39)

    zenlord wrote:
    I'm not sure you did this, but you have to '# netcfg wlan0 wpa' once you set up your profile (you don't need to use iwconfig or dhcpcd yourself anymore) or add net-profiles to your rc.conf to connect automatically.
    Please add [SOLVED] to the subject-line of this thread.
    Zl.
    No, it's simply "netcfg <profilename>" - no need to specify wlan0.
    So if I want to connect to the profile uniwireless, I would do:
    netcfg uniwireless

  • Starting out with cRIO

    Hello,
    What's the most inexpensive way to start programming for FPGA cRIO based applications? I'm interested in learning to develop for an FPGA and cRIO but can't afford the cRIO, is there an inexpensive way to simulate for these (I think even the realtime drivers may be expensive) 
    I found this RIO eval kit, but I'm not sure if it's what I need to start learning cRIO/FPGA LabVIEW development? 
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/205722
    much thanks!
    Solved!
    Go to Solution.

    Yes - I agree with GerdW that the myRIO is a great way to get started with cRIO & RT/FPGA programming. It's very easy to set up and use.
    I recently used one for a personal project - making a giant version of Tetris! (https://decibel.ni.com/content/docs/DOC-35435)
    I can also recommend the eval kit - it comes with a single board RIO an addon board that contains lots of useful things for starting out with RT/FPGA programming (an LCD display, analogue input/outputs that are linked, some push-buttons etc.). I currently have one on my desk at work as we've been doing some stuff recently with LCD displays. They also have onboard CAN (e.g. automotive) so if you're interested in doing anything with that then I don't think you can do that with the myRIO.
    If you can't get the myRIO cheaply enough (because you're not a student - but it's worth talking to NI anyway) then the eval kit is a bit more representative of what it's like to use a cRIO and you can get further with it without needing any additional hardware.
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • My HP 1310 series, model1315 has a problem. Every copy comes out with a heavy green tint.

    I have cleaned the cartridge, put in a new cartridge, and the "self help" report only has  three bars showing, black, green and yellow. It appears it should have six bars of color. All copies come out with a green tint. Any ideas?
    normre9

    It appears your cartridge is out of magenta ink.  Is this an original HP cartridge or a reman.refill?  If the former check the cartridge warranty as shown here.  If the latter see here, then contact your supplier for a replacement or refund.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • New Display coming out with a higher contrast ratio & response time?

    Is there a New 30" or better Display coming out with a higher contrast ratio & response time?
    I'm very used to using crt monitors and the quality of the current 30inch is nice but blacks are not quite as black and colors are not as rich.
    Apple seems to be right on with what they have. Just hoping for an update to their displays soon.
    Thanks ahead for your reply.
    -Line

    Apple reseller in Sydney today said that new Apple HD displays are 6- 8 weeks away and that Apple is running down stocks of the existing displays.
    No idea of the veracity of this claim, just what I was told.
    2GHz dual G5, ATI X800 XT, 2 X 500Gb HD, LaCie D2 1Tb, 3.5Gb RAM , 23" HD Panel   Mac OS X (10.4.9)  

  • My address book and iPhone pics have become low resolution.  Is there a way I can prevent this from happening when I start out with a higher resolution picture?

    I guess I squeezed my entire issue into the subject line.  lol   When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts.  I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses?  Thank you!

    Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
    SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
    '''''Address Bar Search'''''
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
    (3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
    Does that work?
    '''''Search Box'''''
    Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
    Do either of those work?
    There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

  • My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to lissen I had to put on loud speaker or to use handsfree please help me out with this problem if some body have answer?

    My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?

    Hi Venkata from NZ,
    If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for