Attach a F4 help in VA01
Hi,
in Va01 transaction , I need to attach a F4 help to Receiving point field .
Please let me know how and where should I call the search help.
Thanks,
sunil
You can use construction
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
in dynpro flow logic. Content of module <mod> is similar to content of at selection screen.
Or you can change data dictionary and connect F4 help there.
Similar Messages
-
Help I would like to send an e-mail to a group of people, I have the group created, but when I drag it to bcc or to- it will not attach. can anymon help me with this?
In a new email message window start to type the name of the Group you have in Contacts/Address Book in the 'To' field - it should self-complete when it recognises the name.
(Note: this only works with 'normal' Groups and not Smart 'Groups'). -
Attaching a search help to a selection screen "Select-options"
Hello ABAPers,
I have a requirement to attach a search help to "select-options" .
When I checked the table corresponding to the field of select-options,I found that there is no search help assigned for that field.
I have tried using AT Selection-screenON VALUE-REQUEST and Matchcode Object .
However, Matchcode Object requests for standard search help name.
On value-request assign shelp only for the lower linit,but on pressing F4, gives no values found.
Tried using the FM F4IF_INT_TABLE_VALUE_REQUEST also. But this is for the POV event.
Could anyone please suggest a solution for this problem?Hi,
As you are using this Z search help in select options there is no way of interfering with standard SAP table.
You can declare it as:
Select-options QNAME for TQRFCOUT-QNAME matchcode object <Z search help name>. -
How to attach a search help in a table control coloumn based on the search
Hi,
Can anyone help me for attaching a search help in a table control coloumn based on the search help value of another coloumn
in the same table control.
Regards,
Ratheesh BScheck
Re: Switch Search Help during runtime -
Installing Apple TV and can not home share the apps from my iPad. When attempting to download iTunes a message appears indicating iTunes is attached. Need help!
Setup Apple TV with iPad
1. Setup Apple TV
(a) Connect cables and power cord
(b) Turn on TV and select Input
(c) Configure Apple TV e.g. Language, network
2. Setup Home Sharing on iPad
Settings>Music/Video>Home Sharing
3. Setup Home Sharing on Apple TV
Settings>Computer>Turn on Home Sharing. Enter Apple ID and Password
4. Pair Apple TV with Remote Control
General>Remotes>Pair Apple Remote -
Dear All,
I want to attach help to PO number field displayed in the header of VA01.
I want when user clicks on its help it shows a list of numbers from my Ztable.
How do I do it?
Plz reply.
Regards,
Shilpa BansalYou can use construction
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
in dynpro flow logic. Content of module <mod> is similar to content of at selection screen.
Or you can change data dictionary and connect F4 help there. -
Search help enhancement - VA01
Hello,
I am trying to enhance standard search help on material field(RV45A-MABNR) on VA01 screen with my custom search help. Can someone please suggest which search help is being used by this material field?
Thanks,When you go to display the structure RV45A in se11 and goto field mabnr and double click it , you can find
"explicit search help attachment to data element" and not as "explicit search help attachment to data field"
which is the case for RMXTT_TRIAL_HD-PRODUCT
and also when you click on the search help for field at the bottom , you can see " no search help for field RV45A-MABNR". -
Search help for VA01 Header Data Partners
Hello Team,
I have a requirement in va01/02/03 , where i will need to create/enhance a search help for one of the partner functions under SO header data.
and values will need to be extracted from a customer Z-Table., taking into consideration the sales area of the SO
Right now, I am not sure, but it looks like it has a search help attached to it, but when i press F4, nothing comes up.
Is there a way i can check if there is any standard search help associated with those screen field?thankyou suresh.
As i have created this search help and in the view i have given the join conditions as
MARA-MATNR = MARC-MATNR
MARA-MATNR = MAKT-MATNR
MARA-MATNR=MVKE-MATNR
and in search help parameters :
VKORG
MATNR
BISMT
MAKTX
MTART
WERKS
PRODH
I took the Hotkey as 1.
Please guide me what are selection conditions that i need to give in my VIEW.
Here iam using 4 tables.
MARA
MAKT
MVKE
Edited by: vinay raj on Jun 12, 2009 6:42 AM
Edited by: vinay raj on Jun 12, 2009 7:18 AM -
User Exit Or BADi for Ship-to-Party's Transportation Zone F4 Help in VA01
Dear Experts,
I want to change the F4 help of Transportation Zone in Ship-to-Party Address in VA01.
I have to show the possible entries from Z table which is compared by the city of that particular customer.
Explanation:
1. Go to Transaction VA01.
2. Enter the values in first screen and Enter.
3. select the sold to party and ship to party and Enter.
4. Enter any item in item level.
5. Press Display Doc. Header ICON.
6. Go to partners tab.
7. Double click on Ship to party.
8. One Pop up screen will open. (ie. Address from Master Data for Ship-to-Party (Document Header).
9. Press F4 help for the field Transportation Zone. (It will show the possible entries from the table TZONE (All records).
10. I want to show the possible entries only for that particular city.(For a particular city there may be more than one transportation zone. I will maintain these records in Z table ).
I have tried all user exit from the program MV45AFZZ and ADDRESS_SUBSCREEN BAdI. But I could not get the solution.
Please help help me to do this.
Thanks,
MaruthamuthuHi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu. -
How to improve the performance of the attached query, Please help
Hi,
How to improve performance of the below query, Please help. also attached explain plan -
SELECT Camp.Id,
rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount,
(SUM(rCam.Impressions) * 0.001 + SUM(rCam.Clickthrus)) AS GR,
rCam.AccountKey as AccountKey
FROM Campaign Camp, rCamSit rCam, CamBilling, Site xSite
WHERE Camp.AccountKey = rCam.AccountKey
AND Camp.AvCampaignKey = rCam.AvCampaignKey
AND Camp.AccountKey = CamBilling.AccountKey
AND Camp.CampaignKey = CamBilling.CampaignKey
AND rCam.AccountKey = xSite.AccountKey
AND rCam.AvSiteKey = xSite.AvSiteKey
AND rCam.RmWhen BETWEEN to_date('01-01-2009', 'DD-MM-YYYY') and
to_date('01-01-2011', 'DD-MM-YYYY')
GROUP By rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount
Explain Plan :-
Description Object_owner Object_name Cost Cardinality Bytes
SELECT STATEMENT, GOAL = ALL_ROWS 14 1 13
SORT AGGREGATE 1 13
VIEW GEMINI_REPORTING 14 1 13
HASH GROUP BY 14 1 103
NESTED LOOPS 13 1 103
HASH JOIN 12 1 85
TABLE ACCESS BY INDEX ROWID GEMINI_REPORTING RCAMSIT 2 4 100
NESTED LOOPS 9 5 325
HASH JOIN 7 1 40
SORT UNIQUE 2 1 18
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY SITE 2 1 18
INDEX RANGE SCAN GEMINI_PRIMARY SITE_I0 1 1
TABLE ACCESS FULL GEMINI_PRIMARY SITE 3 27 594
INDEX RANGE SCAN GEMINI_REPORTING RCAMSIT_I 1 1 5
TABLE ACCESS FULL GEMINI_PRIMARY CAMPAIGN 3 127 2540
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY CAMBILLING 1 1 18
INDEX UNIQUE SCAN GEMINI_PRIMARY CAMBILLING_U1 0 1Hello,
This has really nothing to do with the Oracle Forms product.
Please, send the SQL or/and PL/SQL questions in the corresponding forums.
Francois -
va01
userexit_check_vbap.
an idoc is coming from edi .
i need to read idoc and depending on condition of field value which is in idoc .
i need to pass a error log to some transation
how to read a idoc which is coming form edi
any sample code is help fullHi Vijay,
There are a number of options depending upon your requirement but these are the things I would try (I don't have access to a system with inbound orders so cannot give conclusive answer).
1. Use userexits in inbound processing FM to transfer data to the application. In your case this will be IDOC_INPUT_ORDERS and CMOD exit VEDA0001 (FM EXIT_SAPLVEDA_011). This exit is called prior to to the BDC and contains all the data from the IDOC and the IDOC number. You could pass this data in a number of ways:
- import/export to memory
- use a common function group for all processing - place data into function group memory during EXIT_SAPLVEDA_011 and retrieve back in the sales userexits
2. The same processing FM IDOC_INPUT_ORDERS exports a flag to memory so you can detect in the sales userexits (da_edi_sign value SDEDI - see include LVEDAF01) - this will be useful for separating IDOC processing to other processing modes
3. Again using the userexit and the idoc number pass these to the application as in (1). You should then be able to call the IDOC function modules to read the IDOC content back (with something like FM IDOC_READ_COMPLETELY). Use this method if the data in the IDOC that you require is not parsed into the sales order tables
Hope this helps.
Thanks,
Pete -
My i phone5 is not powering up even if the charger is attached.. please help
my iphone5 doesn't power up even if the charger is attached to it please help....
Hi generosa1972,
Thanks for using Apple Support Communities. This article has steps you can take if your iPhone will not turn on:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Cheers,
- Ari -
Convert HCM ISR online forms to an attachment in Backend - Help Required
Hi Experts,
I am working on a workflow which actually determines few email ids to whom I have to send in the HCM form details as an attachment.
I have been searching the solution for this but without any result so far.
I have found a ISR function module ISR_DOCUMENT_GET which has a export parameter of Xstring and import parameter of GUID. But it gives out an error when executing.
I also found a FM ISR_CALL_FOR_DISPLAY which can give a ISR document link. But this too fails.
Also I found when debugging the webdynpro application HRASR00_PROCESS_EXECUTE that data comes in from Portal only as XML and not as XSTRING.
I am not sure if I am using the right FMs for this solution. Can anyone help me with this issue.
Regards,
Dinesh.Hi Experts,
I am working on a workflow which actually determines few email ids to whom I have to send in the HCM form details as an attachment.
I have been searching the solution for this but without any result so far.
I have found a ISR function module ISR_DOCUMENT_GET which has a export parameter of Xstring and import parameter of GUID. But it gives out an error when executing.
I also found a FM ISR_CALL_FOR_DISPLAY which can give a ISR document link. But this too fails.
Also I found when debugging the webdynpro application HRASR00_PROCESS_EXECUTE that data comes in from Portal only as XML and not as XSTRING.
I am not sure if I am using the right FMs for this solution. Can anyone help me with this issue.
Regards,
Dinesh. -
Search Help for VA01,VA02 Tcode
I need to develop a new search help in the VA01 and VA02 Transaction Code.
For the below mentioned fields :
Sales Organization, Old Material Number, Material Description, Material type, Plant and Product Hierarchy.
I have created the search help.
But iam not sure about the VIEW.
Please let me know how to write a view for this search help.
Edited by: vinay raj on Jun 11, 2009 4:59 PMthankyou suresh.
As i have created this search help and in the view i have given the join conditions as
MARA-MATNR = MARC-MATNR
MARA-MATNR = MAKT-MATNR
MARA-MATNR=MVKE-MATNR
and in search help parameters :
VKORG
MATNR
BISMT
MAKTX
MTART
WERKS
PRODH
I took the Hotkey as 1.
Please guide me what are selection conditions that i need to give in my VIEW.
Here iam using 4 tables.
MARA
MAKT
MVKE
Edited by: vinay raj on Jun 12, 2009 6:42 AM
Edited by: vinay raj on Jun 12, 2009 7:18 AM -
Issues in attaching a search help to a transport?
Hello
We have a Z_search_help in the Developemnt system(its attached to TR# DEV12345678, which is not yet transported) because of some reason i have deleted this Z_search_help from TR# DEV12345678, well.
After couple of hours I decided to use it again for my other Z_table, so I went to Z_search_help and just made some changes to 'Short Description' field and some parameters (dummy parameter created, saved, deleted) and used the same TR# DEV12345678, well.
But, when I saw this TR# DEV12345678 in SE10, i have noticed my z_search_help is saved as 'Search Help Defination'! but when i checked my other search helps they saved as 'Search Help'!
Pls. let me know
1) Can I go ahead with this 'Search Help defination' and move the TR to QA box? or do i get any issues while transporting to QA box along with its associated Z table(in which I used this Search help)?
2) Whts the difference in these two terminology (Search help defination and Serach help?)
3) Am i all set? or do i need to delete this Z_search_help from the system and create a brand new search help with the same?
Thank youHi
1) Can I go ahead with this 'Search Help defination' and move the TR to QA box? or do i get any issues while transporting to QA box along with its associated Z table(in which I used this Search help)?
I think so as you have changed the structure of your search help, so all component of that search help will be transported
2) Whts the difference in these two terminology (Search help defination and Serach help?)
Sincenrely I don't know the real difference, but I've done your same steps and I've noticed the same behavior, I see the type of object attached to the request is different:
A) R3TR/SHLP/<search help> for Search Help
B) LIMU/SHLD/<search help> for Search Help Definition
Probably the first case A) is for a new search help, so when a search help is created, B) if it's changed: but I think in the both case all components of a search help will be transported
3) Am i all set? or do i need to delete this Z_search_help from the system and create a brand new search help with the same?
No
but if you want you can delete the search help from the request, and then you insert it manually again (just as explained in case A)
Max
Maybe you are looking for
-
Hello guys,im using an i5, my problem is about the led flash of iphone.LED flash is turning off itself when i tried to use it from the control panel.And my iphone is taking dark pictures in full of lightning room,when the flash is on.im not using a b
-
my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?
-
How do i get an audio icon on my desktop toolbar?
I had an audio icon sitting next to my clock on my desktop toolbar, but when I booted up this morning it's not there. Probably an easy fix, but I don't know what to do to get it back.
-
I have a last record button and a previous record button and I want when the user reaches the last or first record that a beep occurs. Is there a way to do this cause I put the bell before or after the last_record statement and it didn't work. Any su
-
Adjusting presentation to audio length
I'm using a complete song as the background audio to a presentation. I would like the slide presentation to end at the same time as the music ends. It requires testing to get it right, but so far, the only way I can see to do that is to play the enti