Attaching documents while RESPONDING to the notification
Hello
I have a requirement where i need to attach document to workflow notification.
This is NOT the standard way of attaching document while sending out the notificaion.
Its like this:
system sends notification->person receives notification to attach support document when RESPONDING to that notification->then submit.
please advice
thanks
kp
Edited by: user8612301 on Feb 24, 2012 12:10 PM
Edited by: user8612301 on Feb 24, 2012 12:17 PM
Hi
Thanks a lot for the reply
Can you pls send me Amy information to confirm your claim
--"mailer will ignore the attachment while responding"
1)
Pls don't mistake me.I may need to reply to my superiors
With a solid proof like passage from user guide etc.,
I saw some use OAF page integration to WF notifications.
Even that kind of OAF notifications won't
Help in my scenario ?
2) Is there a workaroud..My buisiness requirement is to open notification AND upload a documentation AND click Submit button.
Even if the mailer ignores the attachment, will there be a way just to ACCEPT and INSERT document as a BLOB object in a table..?
Pls advice.
Thanks
Kp
Edited by: user8612301 on Feb 26, 2012 12:38 PM
Similar Messages
-
I am getting the attached error while bringing up the Prcs Scheduler
I am getting the attached error while bringing up the Prcs Scheduler:
Cannot open message catalog TMADMIN_CAT
Starting Process Scheduler Server PSNT for Database FSUAT ...
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
tart -S PSDSTSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmshutdown -y
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
Please advise, thank youIs that ever running ? Where/how did you installed tuxedo ? Which OS user was used for tuxedo install ?
Nicolas. -
Can the form attachment files be included in the notification e-mail?
Can the form attachment files be included in the notification e-mail?
Best regardsHi,
Currently the attachment cannot be sent with email notifications in FormsCentral. You may submit feature request via http://forums.adobe.com/docs/DOC-4233.
Thanks,
Wenlan -
Attach document while Goods receipt in MIGO
Hi,
Can I attach a word or a pdf document while posting Goods receipt via MIGO.
In 'Service for Object' the option store document is not possible. It is grey out.
Do I need to do some settings to get this option so as to upload a file while posting the GR.
I am able to get the option while create/change PO but not in MIGO.
RegardsHi!
To attach business documents in MIGO you have to do a little bit customizing first...
In OAC0 check if a content repository is available.
In OAC2 enter the document type you want to attach
In OAC3 enter object type BUS2017 with your document type, content repository etc.
You can attach documents only after the posting because until then SAP has no fix document number which is the key/link to the document. So display the posted material document again and then you can attach the business document.
Greeting -
Error while genrating/creating the notification through HR portal system.
Hello All,
I am trying to check a PCR/OCR Notification but it seems Notification does not exist.
The notification number is not there in VIQMEL table.
VIQMEL takes reference of 3 tables - QMEL, QMIH and ILOA.
I checked QMIH table for this notification and found a field ILOAN. The ILOAN number given in table QMIH is not there in ILOA table.
Can you explain what could be the possible reason of empty ILOAN field?
Also if you could explain the significance of field ILOAN and how this number is generated?
My findings:
In the FM "IQS4_CREATE_NOTIFICATION" at line no 198 there is perform statement as "PERFORM POST_NOTIFICATION_F20 "note 569563"
In the perform statement FM "IQS1_POST_NOTIFICATION" is getting called. In this Fm at line no 87 ABAP statement is as "COMMIT WORK AND WAIT."
We have checked in Development system when this commit is executed one entry for respected notification is getting created in table/view "VIQMEL". But in Quality system after this commit no entry is getting created in this table. I am not able to find reason.
Regards,
Amit TaurHi,
Could you let me know the solution to this? I'm experiencing the exact same issue. It happens in QA and not Development as well.
Thank you,
Kevin -
Attach document while posting invoice in FB60
Hi Sap Experts,
I was out of luck finding a solution in this forum for one of the issue. Can we attach the scanned copy of invoice before posing or parking the invoice thru FB60. I knew its possible after parking the document, but my concern is it possible before parking or posting.
Some experts referred to use Document Management System, i dont have any idea how complex it is, I was wondering is it too complex or can it be done.
Or is there way without DMS for attaching the document.
My requirement is if there is any invoice without PO, it needs approval before posting. The approver would look at the invoice and if its approved it would be posted. How can this be handled in SAP.
Thanks in advance
Best Regards,
gjDeepak
What is proposed work around in this case?
Which are those t-codes where documents could be attached even without DMS implementation?
Thanks.
Vimal -
Digitally responding to the notification sent by workflow
Hi,
I have a requirement that states that the response to a notification needs to be electronically/digitally signed by the end user. I went through the documentations related to workflows and it states something about a message attribute by the name "#WF_SIG_POLICY Attribute". Has anyone used this ? Any info on this would be helpful.
Also what is the setup required for being able to implement digital signatures.
Thanks and Regards
-DDThere is some detail about this attribute in the WF Developer Guide - see page 3-38 in http://download.oracle.com/docs/cd/B53825_01/current/acrobat/121wfdg.pdf
HTH
Srini -
I am trying to create a PDF with a letterhead. I want people to be able to use the document, but I want to secure the letterhead (header/footer) so no one can touch those.
Tools>Forms>Create. Select from existing document (if you select from blank page it takes you to Forms Central). This should put you in the forms edit mode when done. From the Add new field, select text field. That should do the job.
-
Capturing the Actual Responder for a notification sent to a Distribution List in Outlook
Hello All,
Morning , need some guidance on the issue mentioned below which we are currently facing.
We had a requirement to send Oracle Workflow Notification to a Distribution List maintained within Microsoft Outlook Mail client/server. The email address of the users which are part of the DL would be setup in this DL . lets say this DL has the
mailing address as : [email protected] which has 4 users in it let's say Oracle Apps FND users : A (email id - [email protected]), B (email id - [email protected]) , C(email id - [email protected]) , D (email id - [email protected]) with their respective email address . This email address within Oracle Apps would be linked at the FND User setup as well as in the HRMS Employee Setup --. Official details section
For this we created a ad hoc role name : 'Role_abcd' as below , then set ad hoc role attribute as shown below ( in the display name and email address we specify the email address created for the Distribution List )
wf_directory.createadhocrole
(role_name => 'Role_abcd',
role_display_name => 'Role_abcd',
notification_preference => 'MAILATTH'
wf_directory.setadhocroleattr
(role_name => 'Role_abcd',
display_name => '[email protected]',
email_address => '[email protected]',
notification_preference => 'MAILATTH' );
Finally we set the Notification Performer
Item Attribute (Next_Approver) and assign the role name ('Role_abcd') created above to this performer :
wf_engine.setitemattrtext (itemtype => p_in_itemtype,
itemkey => p_in_itemkey,
aname => 'NEXT_APPROVER',
avalue => 'Role_abcd' );
Now we are able to successfully send the workflow notifications to this Outlook DL and all the 4 users : A,B,C & D would get the same notification to their email address mentioned as a part of the DL.
Issue :
Now lets say user A Approves this notification from email notification itself using mail id : [email protected] , In this scenario the Responder name which is getting captured in the wf_notifications table is not consistent , sometimes it is getting populated as : email:[email protected] and sometimes as the value for the recipient role/original recipient itself : Role_abcd .This appears to be wrong
Ideally this responder column in wf_notifications table should get populated as ( email:[email protected] ) so that we could identify as to which person within the DL has responded to the notification.
Could someone please help as to how this could be acheived (to identify the actual responder for workflow notification sent to a Outlook Distribution List
ThanksThe following is the criteria when responding notification from email.
1. If there is no user/role exists for the email address from which the notification is responded, the responder column value will be in the form 'email:[email protected]'.
2. If there is only one user/role exists for the email address, then responder column value will be populated with that particular user/role.
3. If there are multiple user/roles with the same email address, then responder column value will be populated with the user in the following preference order
PER -> FND_USR -> OTHERS
What is the customer code lne.
The fix mentioned in step3 was given in 12.1.3 only. The earlier versions have the responder column value will be in the form 'email:[email protected]' if there are multiple users exists for the same email address. -
Can we attached document in PR?
Dear MM Guru's,
Can we attached files in SAP PR?
Hoping for your positive feedback's. Thank you.Hi,
Not sure what version you're using but when creating the PR you can't create an attachment
I don't think, once you've saved it you have the option however to add an attachment. Unless
of course you're using Document Management where you can attach document to objects -
i.e a purchase req when creating.
For more info please rfere rhe below link...
How to attach file with PR and PO?
I am adding up incase of po...
But you cannot attach document while you create PO in T/Code ME21N
Save you PO ( ME21N ) and again open with change ( ME22N ) then you can attach document through Service for Object button. Service for Object button available down side of Command screen ( in your PO screen ME22N )
Click your Service Object button -> Create -> Create attachment
then select your window directory ( which file you need to attach) select your file Now your system shows message Service "Create attachment" is started.
Save again your PO. You can see (open) your attachment in same field ( Service for Object ) select and Create and check attachment list. You can attach as many document in your PO.
Regards,
Udaya. -
In new ios 7 where did my draft email go after I responded to a notification?
While typing a new email (in Mail on new ios 7 - on ipad2) a VIP notification banner arrived. I clicked on the banner to see the incoming email. It brought me to the email but when I was done reading it, the email I was in the middle of writing had disappeared.
It is not in the drafts file for that account. And just in case, I checked every accounts drafts folder and trash too.
Did ios 7 just evaporate my draft just because I responded to the notification??
Finding many issues like this in ios.
Thanks.I don't think Gmail has an "outbox" - I don't use thier Google "Offline" which I think might include some form of an outbox, but I don't see how a message could go there if I haven't set anything up.
Thanks. -
I am getting the below error while bringing up the Process Scheduler error
Hello ,
I am getting the below error while bringing up the Prcs Scheduler.
Cannot open message catalog TMADMIN_CAT
Starting Process Scheduler Server PSNT for Database FSUAT ...
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
tart -S PSDSTSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmshutdown -y
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
Please suggest.Duplicate thread :
Re: I am getting the attached error while bringing up the Prcs Scheduler
Nicolas. -
MIGO - Services of object (Attach document) doesn't work
Hello Everyone
I am using SAP netweaver 7.
When Using MIGO, I can see the Services of Object button to add attachment and notes.
When I am trying to attach a new document or even create a note, the system give me a message that the document has been created but the "Attachment list" option is still not available.
So I cannot see the document that I just attached.
Trying with transaction VL02N, VF02 and other transactions, it does work.The Services of object is working fine. I can add attachment and notes and of course I can retreive it.
Furthermore, the table SOOD add a record when I am attaching a PC document in MIGO.
Is anyone have an idea why, in MIGO, the creation of an attachment or a note, doesn't activate the "Attachment list" option?
Regards
dstj
Edited by: dstj on Nov 2, 2009 9:38 PMHello everyone
I just found what the problem was.
When creating a good receipt / purchase order in MIGO, you can attach documents and notes but you cannot see what you did until you performed a post and go back to the display mode of the posted document.
Here are the steps.
1. Perform the reception.
2. Add the document, using the services of object
3. post
4. Go back in display material document and enter the document that you've just created
5. Go to the Services of object, than the "Attachment List" will be available and will list the documents that you attached.
It is very annoying to have to post before we can validate what have been added to the attachment or the notes.
As far as I am concerned, we should be able to see the attachment and notes as soon as it as been created.
That way, we can validate, before posting, if all the work has been done correctly, specifically when you have been disturbed in process.
Furthermore, based on my observation, if we are attaching documents and not performing the post, the documents have been loaded in SAP database but will never be linked or deleted from it.
I hope that is not happening to often otherwise that could that a lot of space.
Regards
dstj -
How to get information about BBP_PDATT (attached document)
Hello
I'm writing a function module, and i want to get the attached document of a purchase order. I know the function module BBP_PD_PO_GETDETAIL gets this information but it is too long for me and i just need attached document. I found the Function module BBP_PDATT_GETDETAIL but i have the impression that it is not possible to execute it alone, it dumps.
And i can't find links between crmd_orderadm_h and BBP_PDATT.
Thank you for your help.
Peggy.The link is this one:
pj of header
SELECT COUNT(*)
INTO l_nbr_occur
FROM bbp_pdatt
INNER JOIN crmd_link
ON bbp_pdattset_guid = crmd_linkguid_set
WHERE objtype_set = '33'
AND crmd_link~guid_hi = et_pdlist-guid
AND del_ind NE 'X'
AND internal_ind NE 'X'.
pj of items
SELECT guid
APPENDING TABLE lt_guid_i
FROM crmd_orderadm_i
WHERE parent EQ et_pdlist-guid.
LOOP AT lt_guid_i INTO l_guid_i.
SELECT COUNT(*)
INTO l_nbr_occur2
FROM bbp_pdatt
INNER JOIN crmd_link
ON bbp_pdattset_guid = crmd_linkguid_set
WHERE objtype_set = '33'
AND crmd_link~guid_hi = l_guid_i
AND del_ind NE 'X'
AND internal_ind NE 'X'.
ENDLOOP. -
How to handle the Notification Responsses
I have created a custom process for journal approval workflow for routing the notifications and handling them. My process has a function activity which creates a custom role and assigns users to that custom role which is working fine. The notification is being sent to all the users in that role, Lets say 5 users. if any of them approves the notification, the process is ending with the status of approve. But my requirement is to get the responses from all the recipients and if there is one rejection response, the total batch should get rejected. For the non responding recipients the reminder notification should be sent after 2 days....
Out of 5 recipients, if one recipient responds to the notification the status of the notification is closed for the responder and the notification status is cancelled for the non responders as found in the wf_notifications table, How can we keep the notification open until they respond to it??
Now i am using the standard notification activity with the result type of Approval, I guess i may have to use the VOTE YES/NO??
Please Advise.....Hi,
There are two answers to your original post on the WorkflowFAQ forum, including my response to this identical post.
http://smforum.workflowfaq.com/index.php?topic=531.0
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com
Maybe you are looking for
-
I have a gift card I want to use in iTunes but when I go to purchase it asks for my password, how do I use the gift card not credit card
-
HP Photosmart Premium all in one 309a
I cannot print envelopes from this printer. I keep getting the message correct paper size not available. It prints normal paper it just won't properly detect envelopes. I have tried 2 different kinds of envelopes Greeting Card and No. 10 envelopes
-
Table for Storage location name..
Hi frnds, I have a storage location number.. Now how do i find the name or Description for that? How to find the table? ,, If anybody knows the table name plz let me know.. Thank you. Sree.
-
How to retrieve the Source XML Payload into an External System using message ID?
Dear Experts, I have a requirement to retrieve the inbound XML message payload based on Message ID into Backend ERP system for reference or re-process as needed. Request you to let me know the technique to get the source payload of successful message
-
Multiple Frameworks in a Desktop
Hey guys. So we have defined two different layouts ( one similar to SAP original ) and other a bit different with a vertical menu , footer iview etc. Now we want every user to be able to define the framework they want to use ( Both frameworks are in