Attaching Multiple Elements to Same Path

Greetings Friends,
Can someone please tell me if (how) I can attach multiple elements (text) to the same path.
I.E. I have 4 "headings" I want to display around a single ellipse.
Thank you so much!

Unless each heading is contained in a single line of text, there is no way to do it. You'll need to clone the path three times and attach the text seperately to each.

Similar Messages

  • Writing schema for multiple elements with same name with diff. content

    following is the XML file,
    <?xml version="1.0" encoding="utf-8"?>
    <e-abstract xmlns="http://www.citicorp.com"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="Deed.xsd">
    <deed>
    <deed_type>
    <deedtyp name="Quit Claim" value="Q" />
    <deedtyp name="sheriff's deed" value="Sheriff" />
    <deedtyp name="Warranty" value="W" />
    </deed_type>
    <deed>
    </e-abstract>
    --- end----
    in this I have 3 elements of deedtyp , how i can write them in .xsd file as these elements have same name?Please help, if u have idea about this...
    i have written .xsd up to deed_type,
    ----Deed.xsd----
    <? xml version="1.0" encoding="UTF-8" ?>
    <xs:schema xmlns:xs="http://www.citicorp/2001/XMLSchema"
    targetNamespace="http://www.citicorp.com"
    xmlns="http://www.citicorp.com"
    elementFormDefault="qualified">
    <xs:element name="deed_type" type="string" use="required"/>
    <xs:simpleType name="string">
    <xs:restriction base="xs:string">
    </xs:restriction>
    </xs:simpleType>
    </xs:schema>

    I don't know the exact and complete specification of your intended schema...
    anyway, from what I can see in your post, I assume that
    <deed>
        <deed_type>
            <name>Quit Claim</name>
            <value>Sheriff</name>
        </deed_type>
        <deed_type>
            <name>sheriff's deed</name>
            <value>Sheriff</value>
        </deed_type>
        <deed_type>
            <name>Warranty</name>
            <value>W</name>
        </deed_type>
    </deed>would be the "proper" way to go...
    which makes your "deed_type" a complexType, including a sequence of two kinds of xs:string elements : "name" and "value"

  • How to attach multiple attachments in info path form as a Hyperlink and storing in share point document library?

    Hi,
    I have designed a infopath form which is having multiple attachment control and user will upload multiple documents on it.
    The problem in sharepoint infopath form is user's are unable to attach large files which is more than 5 MB (since default limit is 4096KB).
    I know we can increase the User session data for Infopath in central admin .But that will impact our server CPU since we want to increase to 50 MB.
    I got the other approach which is like storing the documents in sharepoint document library and adding the attachments as a hyperlink in infopath form which will reduce the size of the form and will not affect performance.
    Can anyone please provide the detailed explanation and method here(if possible with screenshots)
    Thanks & regards,
    Poovi

    Hello,
    I also had same requirement earlier and what i did, i have given the doc library link to infopath form to upload file. Then create new web service data connection to get files from library to infopath and show as hyperlink. Basically you can add one repeating
    section with hyperlink control to bind the files in IP.
    You may refer this blog and it has explained exactly same approach
    http://sharepointvenividivici.typepad.com/sharepoint-customization/2013/01/infopath-show-links-to-documents-in-a-library-from-the-form.html
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Counter function value to multiple elements as same value in different node

    I need your help!
    I have a counter function and value of that needs to be passed to two elements of Node A and Sub Node B..
    Ex: Mapping
    Map Counter function to NodeA.Element1 and also to NodeB(subnode).Element2
    Expected Result:
    NodA.Element1 = 1
    NodeB.Element2 =1
    but I am getting the result as
    NodA.Element1 = 1
    NodeB.Element2 =2
    I understand the reason.. since the counter function is called each time..
    so my questions is how do I the expected result as mentioned--
    NodA.Element1 = 1
    NodeB.Element2 =1
    remember the XML is multiple occurence(1.. unbounded for both the nodes)
    Thanks-Gopal

    I think  I did not explain phrase it correctly..Technicallyh NodeA.Element1 value should be copied to NodeB.Element2..As long as I can generate counter to NodeA.Element1 and hold the value somewhere to copy to NodeB.Element2, that would be fine..
    the above suggestion you guys made would not work as it will create two different set of sequences.. however Index suggestion might work differently but still I might go out of sequence if I have multiple detail record for each master record..
    Here the expected output (concise)
    Record 1 - NodeA.Element1 = 1
    Record 2 -NodeB.Element2=1
    Record3- NodeA.Element1 =2
    Record4 - NodeB.Element2=2  -->two detail records
    Record5 - NodeB.Element2=2  --> two detail records
    please help

  • How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/iPad?

    How can I attach multiple filled-form PDFs to the same outgoing email on iPhone/ iPad?

    This isn't supported in the current version of Adobe Reader on iPhone/iPad.
    Shradha

  • How to install oracle multiple homes in the same path

    Hi,
    In my environment i have multiple oracle home.
    for ex:
    /u01/oracle/product/10.2.0.3/
    /u01/oracle/product/10.2.0.4/
    /u01/oracle/product/11.2.0.1/
    The above are the oracle default home paths
    now i want to install 11.2.0.2 in the same path with different folder under the same name version
    may i know what are the pre-request parameter that i need to check in solaris 64 bit
    And i want to install oracle software alone
    while installing oracle software alone how about the file /var/opt/oracle/oratab and oracle oraInventory files
    whether it replace the old version oracle file. Please clarify
    Thanks in advance.

    Hello,
    By default, the Oracle Inventory directory is not installed under the Oracle Base directory.
    This is because all Oracle software installations share a common Oracle Inventory,
    ...The Oracle Inventory should be shared by all Oracle installations on the Server. So its location is unique.
    However, you may have several Oracle Base directories.
    Oracle Base is the root directory of the Oracle installation and may change from one major release to another one. However, the same Oracle Base may be used for several installations:
    http://download.oracle.com/docs/cd/E11882_01/install.112/e17163/glossary.htm#g998168
    Also, by default OUI suggest you the Oracle Base directory. In general you have something like "/u01/app/oracle". But you are free to set the Oracle Base directory you prefer.
    Hope this help.
    Best regards,
    Jean-Valentin

  • Design multiple elements in the same row

    hi,
    i am new to web dynpro java. how to design multiple elements in the same row. ie a textfield and inputfield in the same row in form design layout.
    thanx

    Hi Viral Patel,
    To design multiple elements in the same row. Follow below Steps
    1.) Open your View --> Select Layout Tab --> In the Outline Explorer  --> There will be a Default " RootUIElementContainer " --> Select it --> Right Click & Select Insert Child Option --> A new Window appears --> Select TransparenContainer & Press Finish --> Now Select TransparentContainer --> Right Click & Select Insert Child Option --> Add TextView and Press Finish --> Similarly add InputField to the newly added TransparentContainer.
    ---> Now to add above two UI Elements in the same row in form design layout --> Select Newly added TransparentContainer --> In the Properties Change layout Property to GridLayout & set colCount --> 2 .
    It will make the above two UI Elements in the same Row
    With Regards,
    Roop Kumar.

  • Multiple nohup commands from same path

    I had a doubt which is very urgent as my live migration is going on. I had run the 2 import commands from $ORACLE_HOME/bin for importing 2 schemas like:-
    nohup imp JISPBILCORBILLINGPRD501/JISPBILCORBILLINGPRD501 fromuser=JISPBILCORBILLINGPRD501 touser=JISPBILCORBILLINGPRD501 file=JISPBILCORBILLINGPRD501.dmp log=JISPBILCORBILLINGPRD501.log commit=y feedback=10000 ignore=Y &
    nohup imp JISPRATCORBILLINGPRD501/JISPRATCORBILLINGPRD501 fromuser=JISPRATCORBILLINGPRD501 touser=JISPRATCORBILLINGPRD501 file=JISPRATCORBILLINGPRD501.dmp log=JISPRATCORBILLINGPRD501.log commit=y feedback=10000 ignore=Y &
    Normally I run one import from the path of $ORACLE_BASE and one from $ORACLE_HOME/bin so that I have 2 different nohup.out files to see the output. But, in this case, as the 2 imports are run from the same path, will the nohup.out have output from both the files?
    So, my doubt is that hope there is no problem in running the nohup command from the same path and the nohup.out is populated with the output of both the
    imports.
    I hope, my question is clear.
    Please, help in solving the doubt.
    regards

    I had a doubt which is very urgent See how to configure application server 10g for forms 10g about urgency....
    That said...
    will the nohup.out have output from both the files?Yes, and outputs will be mixed.... but you have separate logs, haven't you ?

  • EText - Multiple elements in the same record

    I was wondering if it is possible to put multiple elements within a single record using eText. For example
    <SELECTION>
    <CRITERIA>
    <INVOICE>INV_NUM1</INVOICE>
    <INVOICE>INV_NUM2</INVOICE>
    <INVOICE>INV_NUM3</INVOICE>
    <INVOICE>INV_NUM4</INVOICE>
    </CRITERIA>
    </SELECTION>
    Produces the following output
    INV_NUM1 INV_NUM2 INV_NUM3
    INV_NUM4

    <NEW RECORD>     FILE_HEADER
    1     25     Alpha     R, ‘ ‘     Invoice[1] || Invoice[3]|| Invoice_number
    26     25     Alpha     R, ‘ ‘     Invoice[2]     
    51     25     Alpha     R, ‘ ‘     Invoice[3]
    You are in the record FILE_HEADER and at level <LEVEL>     Invoice.
    so any element is accessible under or above is available , like above Invoice_number is accessible if that is available under <INVOICE>

  • BPEL - multiple receive elements for same partner/operation

    Is it possible to have more Receive elements for same operation in one BP? I need to create a business process for approving requests in a number of steps. The process looks like this:
    RECEIVE (createRequest)= INVOKE (...)
    < REPLY (createRequest)
    RECEIVE (approveRequest)= INVOKE (...)
    < REPLY (approveRequest)
    RECEIVE (approveRequest)= INVOKE (...)
    < REPLY (approveRequest)
    (...)The creation and first recieve element for "approveRequest" is ok, but the others are never executed. I believe the correlation sets are set correctly. I also can't use a While element since every step could be a bit different. If I substitute the other recieves for different operations, the whole process executes correctly.
    Can someone please advice me on what i am doing wrong? If it's somehow not possible to have more then one Recieve for a particular message in one BP, what is the best way to do it differently?

    Thank you for your answer. I tried to change the Receive elements to Pick + OnMessage, but it's not working either. It goes past the first one but it never reaches the second one. That's what i had in the first place - two Pick elements after each other, each with an 'approve' and 'dispprove' branch, but it didn't work so I simplified it to an easier process with just receive elements.
    If it's working for you, do you do something special in the process? Which version of OpenESB are you using? Would it be possible for you to send the BPEL file? Here is a part of mine I've just made to test this solution.
    <bpws:pick name="Pick1">
        <bpws:onMessage partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemIn5">
            <bpws:correlations>
                <bpws:correlation set="orderItemId" initiate="no"/>
            </bpws:correlations>
            <bpws:sequence name="Sequence2">
                <bpws:assign name="Assign7">
                    <bpws:copy>
                        <bpws:from>true()</bpws:from>
                        <bpws:to part="return" variable="ApproveOrderItemOut4"/>
                    </bpws:copy>
                </bpws:assign>
                <bpws:reply name="Reply3" partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemOut4"/>
            </bpws:sequence>
        </bpws:onMessage>
    </bpws:pick>
    <bpws:pick name="Pick2">
        <bpws:onMessage partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemIn6">
            <bpws:correlations>
                <bpws:correlation set="orderItemId" initiate="no"/>
            </bpws:correlations>
            <bpws:sequence name="Sequence1">
                <bpws:assign name="Assign6">
                    <bpws:copy>
                        <bpws:from>true()</bpws:from>
                        <bpws:to part="return" variable="ApproveOrderItemOut3"/>
                    </bpws:copy>
                </bpws:assign>
                <bpws:reply name="Reply2" partnerLink="Client" operation="approveOrderItem" portType="ns1:OrderManagementClientPortType" variable="ApproveOrderItemOut3"/>
            </bpws:sequence>
        </bpws:onMessage>
    </bpws:pick>

  • Inject BGP Default Routes into Multiple VRF before Best Path Selection

    Hello, 
    I have the following setup:
    Multiple Border Routers with eBGP sessions to external AS. We receive a default route from this multiple AS to keep the Table manageable. We noticed an important part of our traffic was been SW routed instead of CEF when we had the Full Internet table. Router Resources came to the ground when we changed to a default. 
    Now I want to separate this default routes into different VRF. Attached is the Diagram. 
    My question is,  the multiple default route all go into the BGP Table. The BGP table then select the best route and place it on the RIB and then to the FIB. 
    I want to redistribute the different Route on the BGP table prior to the Best path selection algorithm and placed on the RIB. 
    How can I achieve this?

    Hi,
    Redistribution of multiple routes to same prefix is not possible. Even if you have configured BGP multipath and all different bgp routes got installed into routing table, during redistribution only route will be redistributed. 
    Also would like to understand the requirement of redistributing multiple BGP routes in to IGP. As per your diagram, 3 different eBGP sessions are on three different routers, so you can prefer eBGP route over iBGP received from other routers and can distribute eBGP route to IGP from each router. Thus you will have three different default routes in to IGP in core.
    Please don't forget to rate this post if it has been helpful
    - Akash

  • How do I search and return multiple elements of array quickly (like Matlab find)?

    Hi, I am a fairly experienced Labview programmer, and I have always wondered if there is a way to quickly search arrays for multiple elements that meet a selection criteria, equivalent to the Matlab find command.  While my inability to do this in Labview has always bugged me, I now have an application that requires this ability and I need to find a solution. 
    The fastest way that I have found to do this in labview is to perform comparisons on vectors of data, and then use the resulting Boolean vector to parse the array using a for loop and shift registers.  I have attached a vi snippet of a benchmarking vi for one of the simple searches I need to do.  On my laptop this search takes about 600ms.  In comparison, the equivalent in Matlab:
    newArray=oldArray(find(oldArray(:,4)./oldArray(:,2​)>1.5),;
    executes in about 1.2ms.  So, the way that I am doing this in Labview is only 400 times slower
    Needless to say, I need to do these types of searches many many times, and those 599 extra ms start to add up pretty quickly!
    Thanks for your help,
    Aaron    
    Solved!
    Go to Solution.
    Attachments:
    benchmarkSearch.png ‏641 KB

    Hi Aaron,
    the slowest part is probably the "build array" node in the loop.
    Try this:
    Define an array of same size as input data (or simply use a copy of it) and wire that to the shift register. Keep a counter of found rows in the loop. Use IndexArray and ReplaceArraySubset in the loop to move the found rows to beginning of array (overwrite "bad" rows). After the loop simply ReshapeArray to the number of found rows...
    Sorry, don't have LV(2009) at hand to edit your snippet.
    Message Edited by GerdW on 11-20-2009 08:27 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How do I attach multiple files from the pages app to my email

    I'm trying to attach multiple documents from the "Pages" app to my email.  I'm using an ipad.  It is only letting me attach one at a time and send each document as individual emails.  I would like to be able to send one email with all 4 documents at the same time.  Any suggestions?
    Another thought- When I go to my gmail app to compose an email, I have the following to send:
    to:
    cc:
    subject:
    But there is not a paperclip to click to attach any documents either.  Is this all connected and something in my ipad settings needs to be adjusted?

    You can only attach one file at a time to email in the Pages app
    You cannot attach files in the mail app. If you want to email a file, you do it from within the app where the file is saved such as what you did with Pages.

  • How to attach multiple file in one mail

    Hi,
    I've problems with sending multiple files via Gmail account (Ipad version)  When sending the photo or video, I've to just click the photo and choose send to mail one by one. Any simpler way?  Sometimes i did sent both mpg and jpg but the reciepient didn't see any attachment too
    Anyone can help advise how to attach different file (doc, video, photo) in one mail will be a lot appreciated. Thank you so much

    You can attach multiple pictures to an email on an ipad2. Don't know about original iPad.
    Choose a photo or take a screen shot (hold down home button and button next to volume control at same time--screen shot now will appear in photos).
    Go to photos and edit your picture or screen shot, save it, then hold down on the image and copy it.
    Go to mail, create a new mail and paste it in.
    Save you mail as a draft.
    Go back to photos and select a different photo, copy it, and return to your draft, and paste it in. Repeat if you need to add more.
    Anything that you can take a screen shot or have an photo of can be pasted in one at a time into that draft email.
    If mail gets uncooperative, during this process, then double click on home button and quit multitasking mail, then open up mail again and send your draft. Uncooperative means gets frozen.

  • Can I install multiple versions on same computer

    Can I install multiple versions of Elements on same computer? Especially out of rder. I have 12 installed but would like t istall 8, 10, and 11
    .

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

Maybe you are looking for