Attaching segment to Message type.

Hello ,
How are segments attached to a Message type. I want to know the step wise process if any as i am a novice in this field.
Regards,
Vinod Kapote.

Hi Vinod
Plse go to the below link
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b82b043d711d1893e0000e8323c4f/frameset.htm
Regards
Anis

Similar Messages

How to get the IDOC name attached with message type (IDoc at receiver end)

Hello Friends,
I have configured the Order Confirmation Idoc.And the port used is XML_HTTP. in this port generally the idocs are sent to a java servlet.
So there the idocs are being created with name :- Idoc_no.XML
but i need to get the IDoc name prefixed or attached with the message type name, that the particular idoc uses.
waiting for your replies .
thanks,
jeevan

Hi Jeevan,
I am sorry for the confusion, the solution i provided is used when we go for XML FILe port. But when we go for XML HTTP port, this option is not available in SAP. So we need to check with the target system, whether there is any option available to read the file contents before saving , so that we can save the idoc with the required file name .
With my knowledge i assume why this option is not there for XML HTTP port is when we use XML HTTP port the idoc will be converted into XML and will be transported over HTTP protocol to an remote system which may be any type like XI, Java Servlet, Business connector, .Net etc. So in that case all the systems may not support the file name what we propose from the SAP. This is my assumption.
Please go through the help provided by SAP for XML Port types
http://help.sap.com/saphelp_nw04/helpdata/en/21/e9c975eb1911d6b2ea00508b6b8a93/frameset.htm
Please check with the Java guys who are working at the target end, whehter they may help you to resolve.
Thanks & Regards
Vijayanand Poreddy

Inbound Processing with reference to user defined Message type

Respected Readers,
I have created a segment with fields
Matnr
mbrsh
mtart
vpsta
maktx
meins
matkl(Total 7 fields)
I have created a idoc also and a message type and assign the idoc with message type.
Now i have set the communication partners also and created the distribution model with my message type and distributed also to the reciver side.
Now as it is not the standard message type like MATMAS so we cannot use the tcode BD10 to send the material.Instead of it i have to write the program to create the idoc for sending it.
So i have created the program for the generation of IDOC.
Upto here picture is clear.
In the case of Inbound in standard we use the tcode BD11 to get material but same thing as we are not using the Standard Message type we have to create our program.
Now in this case i have written a function module and that function module is attached to the process code and process code is attached to the message type and message type is attached to the partner profile.
i have done the assignments in we57 and bd51 also.
Now idoc is created in the inbound side with status 70.
but i am not getting how to upload this data in standard tables Mara and Makt.
So that if i go to tcode MM02 and give the respective Matnr ,it should display that material.
First tell me what i have done is the right procedure or i have to make somechanges somewhere .
Secondly if you please give me the function module code for inbound processing to upload the data in this standard table( mara ,makt) so that material is created in the reciver side also.i will be very thankful to you.
I am only using seven fields in creating the material.
Please kindly send your answers and not links .
Thanks

i have done the same thing and used same parameter in import ,export ,tables and exception tab.
i have written some code also .
But i am not getting the code to upload the data in the standard tables so that material should be get created automatically as soon as the data get uploaded
in tables.
Somewhere i have read that you have to use the BDC concept Call transaction method to upload the data.
But how to use the BDC code in Function module , i am not getting.
Please can you send any example of code for this task.

Creation of IDOC with message type INVOIC01

Hi All,
I am trying to create a new IDOC with message type INVOIC01.
When I see transaction WE81, I observe that the required message type INVOIC is available. Also in WE82 the basic types INVOIC01, INVOIC02 and INV_ID01 are attached to the message type INVOIC.
However, while trying to create an IDOC in WE19 using a message type, I get options to create against INVOIC02 or INV_ID01. The basic type INVOIC01 is not getting populated because of which all the IDOC that I create are of basic type INVOIC02.
The client wants me to create IDOCs with basic type INVOIC01.
Can anyone please help?
Thanks in advance.
regards
Nagarajan

Hi Nagaraj!
I've looked at the documentation and did not find information, which would help me. Should I use in my case z-segment to put extra lines or there is some qualifier in segment E1EDP02 (Document Item Reference Data), which triggers to another referencing (not PO or delivery note)?
Thank You,
Natalija

Problem in Message Type of Partner Profiles - IDOCS

Hi everyone,
I have created two Partner Profile's in WE20 attaching the corresponding Message Type with them. I have transferred one Message Type from one Partner Profile to another. When I save the model in BD64 and Generate the Partner Profiles from there I see that ''SYNCH" message type also gets added in the target Profile.
Can you please suggest why it happens and how to rectify this problem so that "SYNCH" message type does not get added anymore.
With warm regards,
Sandeep Panja.

Hi,
U can see SYNCH message type in all the partner profile.
The monitoring object is located in the same client A function module is called locally In this case no further Customizing settings are required
· The monitoring object is located in the same physical system but in a different logical system (client):
In this case you have to assign an RFC destination with a dialog user to the message type SYNCH in the current client for the client to be monitored.
http://help.sap.com/saphelp_nw70/helpdata/en/90/c4b523c4c411d2a5ee0060087832f8/frameset.htm

ALE - error in custom message type creation

HAI friends,
I am new to ALE IDOC, i am creating custom message type for custom table . i created segment, idoc, message type and executed outbound program . in outbound client, status is dispatch ok. so problem in outbound.
my problem is in inbound . i created one function module idoc_input_zmsg. In test tool for idoc processing ie. TCODE WE19, i clicked my segment and then i clicked the inbound function module button . In function module text box my own function module idoc_input_zmsg is available. but when i click ok button, i am getting the following error.
"INTERFACE FOR FUNCTION IDOC_INPUT_ZMSG IS INCORRECT".
PLS HELP ME . THANKS IN ADVANCE.
WITH REGARDS,
SENTHIL KUMAR.R

All the IDOC processings FMs should have similar interface like this.
*" IMPORTING
*"     VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"     VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*"     VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*"     VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*"     VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"     VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*" TABLES
*"      IDOC_CONTRL STRUCTURE EDIDC
*"      IDOC_DATA STRUCTURE EDIDD
*"      IDOC_STATUS STRUCTURE BDIDOCSTAT
*"      RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"      SERIALIZATION_INFO STRUCTURE BDI_SER
*" EXCEPTIONS
*"      WRONG_FUNCTION_CALLED
Check if you have different one. Even if the name of variables is not as above you may get the error message .
Cheers

Multiple message types for an idoc type

Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?

Hi Kunal,
Below are my thoughts from a design perspective,
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
Before you look upon the no. of message types you need, i guess you need to look at the business requirement. Per your requirement you want to send send two sub sets of data. The first subset in the first 3 segments and other three segments for the second subset of data.
Is the structure of the first subset of data similar to the second subset If not, better to create two IDOC Types. If they are similar, then create one IDOC Type with three segments and have two message types for each subset of data.
For Ex: ORDERS05 is the IDOC type for Orders, this IDOC type provides capability to carry data related to any type of orders
but the action on the data is facilitated by the message type like ORDERS for create, ORDCHG for change, ORDRSP for Order response etc.
OR
Are these two subsets of data related to each other, if yes understand the relation? If not related at all then you might be better of creating two separate IDOC Types.
Like in the above example A purchase order is related to a sales order so you can use the same IDOC type, but in case of a order response and ASN that data sent is different and hence you will need different IDOC types (even though a SO is related to a DN).
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
The above again depends on the how tightly/loosely coupled are the data sets, you can have just one program and have a simple case statement on the message types or have two different programs.
You will also have to consider points like, if any of the subsets is more prone to more change in terms of the structure and associated business logic. If yes, then you might want to keep the programs separate to reduce work on regression testing etc.
I am sure you will receive more inputs from the experts on the forum and the list of points to look for will get longer , so understand the requirement, dependencies and if you have any specific questions you could post it on the forum.
Regards,
Chen

Idocs multiple message types

Hi all,
I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types
if it is so pls tell me how to assign these two message types for my idoc .
i want to create multiple message types because i want to send same idoc type to diff legacy systems.
My requirement is message type one is only for first three segments and message type two is for another three segments .
The outbound program 1 for mess type 1 should fill fill the data for only first three segments and second outbound program corresponding to mess type 2 should fill the data for last three segments
how should i design for my requirement. suppose if the idoc has two message types then it has two outbound programs?
Edited by: kunal kakkar on May 16, 2011 10:21 AM
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on May 16, 2011 12:39 PM

COND_A01 is the IDoc to distribute the condition master data. Sales order (ORDERS05) is transactional data. It is not feasible to generate a master data IDoc from a sales document. Even if it was feasible, what would be the purpose? The master data hasn't changed, why would anyone want to send it again with every order?

What's the difference between segment filtering and reduced message type

Hi gurus,
What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
Thanks in advance.

Hi,
BD53 is for IDoc Reduction.
this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
there mandatory fields will be in Green color..
And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
the table related to this transation is TBD20
please go through below blog you have an idea abt that,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
http://saptotal.com/IDoc%20Segment%20Filtering.html
regards,
ganesh.

How to get the segment detials of IDoc message type.

Dear Friends,
I want to write function module , which takes the IDOC message type as an input and returns all the segment fields in response.
Basically I want to get the XML schema of a IDOC message type and need to expose these details toa 3rd party application to use.
Dear experts ,Please do give me some ideas how to achieve this .
like tables from where i can get these details or u feel any other goos way of doing the same.
thx,
jeevan

Hello experts,
Please participate .........
To redefine my objective I will say:--
I am trying to do some thing very similar that is there in XI .
You might have seen the way IDOCs are shown while mapping an idoc structure.
Its like you select a message type and u get all the list of Idoc Structure shown .
I am really relying on you people.
thx ,
jeevan

ZHRMD_A Custome message type issue with custom segments.

Hi Experts,
We have implemented ALE in HR system, we have all other ALE using HRMD_A and we have jobs scheduled for HRMD_A message type. We dont want this job should trigger our model and distribute the data. So we have reduced the HRMD_A messae type to ZHRMD_A for basic type HRMD_A06. Every thing fine. After upgrade of SAP FROM ECC6.O to EHP4, PFAL is not creating IDOC segements for custom segments Z*. for example Z1P0002....ETC, though there is personal data for PERNR.
Please guid if you have come across such situation and solution.
Thanks & Regards.
Venkat.

Hi Venkat,
In the same way i too have one situation like...have different model view with same message types( and same extension type) for various countries from one sender system.
Should i create reduced message type for each model view?
Or can i use same message type HRMD_A for various model views?
If i can use same message type and same extension type for various model views is there any restriction we need to write in USER EXIT EXIT_SAPLRHA0_004?
Regards,
Lava.

Segment E1EEDPO4 is missing in outbod message type ORDERS05

Hi Gurus,
When I create an Output type for PO using Message type ORDERS05, the segments E1EDP04 is missing in data records. Eventually this segment should carry the tax information. The tax information is very much appeared in Po and it is missing in IDOC. what should I do to make this segment appear in outbound IDOC data records.
Please mention the T codes and steps.
Thanks and regards
Rohini kumar

Hi,
You can use user exits EXIT_SAPLEINM_002 to populate segment E1EDP04 for outbound IDoc ORDERS05.
This segment is not populated in standard FM IDOC_OUTPUT_ORDERS.
Regards,
Ferry Lianto

IDOC Segment missing for MATMASS Message type

Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
1) Change pointers are defined in system for the message type T Code u2013 BD52.
2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
In our case IDOC is getting generated but with one segment missing.
We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
Regards,
Roshni.

Jürgen L. wrote:
> I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
> This seems to be home made.
>
> You are expecting that standard SAP programs are generating change pointers for your z-fields?
> Do you see a change history in material master for your z-field?
>
>
> follow the slution from this thread:
>
Yes ,This is a Z -field.
Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
This is z-field in the basic data view of material master.
Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
But in case of succesful IDOC the object value is same as material number.
Regards,
Roshni

Custom segment does not exist for message type Debmas_cfs

Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabh

Hi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi

Which IDOC segments need to be filled for message type CRMXIF_ORDER_SAVE_M

Hi ,
I am working on data migration to CRM7.0 system.I am using LSMW for creating ISU Contracts using CRMXIF_ORDER_SAVE_M message type and CRMXIF_ORDER_SAVE_M01 IDOC kindly help me in what all segments needs to be filled for creating ISU contract in CRM system.
Kindly share if there are any documents related to data migration into CRM system for IS - Utilities.I need to migrate u201CBusiness Partnersu201D, u201DISU Contract Accountsu201D, u201DConnection Objectsu201D, u201DPODu201D & u201CContractsu201D to CRM 7.0 .
Also I need to migrate Customer Interaction Records, Business Activities, Service requests and other information such as u201CProspectsu201D, u201CMarketing Attributesu201D to CRM 7.0.
Kindly help me in this as I am not able to find any thing from web.
Regards,
Suresh.

Hello,
I'm not sure you're taking the best approch.
Usually when you need to migrate ISU contracts into an ISU-CRM integrated system, you first migrate everything you need in ISU through the VERY powerful migration workbench available (transaction code EMIGALL), and then you replicate your data to CRM via INITIAL download.
That's definitely the strategy that will give you the best performance, and less work.
Kind regards,
Nicolas Busson.

Attaching segment to Message type.

Similar Messages

Maybe you are looking for