Attempting to perform a switchover (DataGuard)- adautocfg.sh not completing
Hi,
We are currently running EBS 11.5.10.2 on DB 10.2.0.4 and have a dataguard setup. This morning we were attempting a switchover (on a test dataguard system) using documentation from Metalink Note 216212.1. Upon reaching step 9 (Finish applications configuration on the middle tiers), adautocfg.sh is not completing successfully on the Admin node. Checks in the error log indicate that there's a connection problem with the database. We had a similar problem a couple months ago and logged a Metalink case, to which the solution was to run the following SQL command as the apps user:
exec fnd_net_services.remove_system ('');
commit;
We tried running this again followed by adautocfg.sh on both Admin and DB node but still end up with the same problem.
Does anyone have any ideas as to what we can try to fix this problem? Thanks.
Lia.
Edited by: Lia on Jan 22, 2009 9:43 AM
hsawwan- Yes we did use that command. Actually in the Metalink note step 8 the instructions are to execute that command using the SID. We did that and then when we ran adautocfg.sh it was unsuccessful.
Here's the error log- I didn't post the whole thing due to its length.
SQL*Plus: Release 8.0.6.0.0 - Production on Thu Jan 22 09:31:02 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
Enter value for 1: Enter value for 2: Enter value for 3: ERROR:
ORA-12537: TNS:connection closed
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
+.end std out.+
+.end err out.+
AutoConfig Services Phase
Running Service Process 1 of 1 for JTF_TOP
Executing script in InstantiateFile:
+/u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby/jtfsvfm.sh+
script returned:
jtfsvfm.sh started at Thu Jan 22 09:31:02 AST 2009
jtfsvfm.sh exiting with status 0
+.end std out.+
+.end err out.+
Processing DriverFile = /u0/miatest/miatestappl/mwa/11.5.0/admin/driver/mwatmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for MWA_TOP
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/mwa.cfg
dest : /u0/miatest/miatestappl/mwa/11.5.0/secure/mwa.cfg
backup : /u0/miatest/miatestappl/mwa/11.5.0/secure/mwa.cfg to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/mwa.cfg
setting permissions: 644
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/mwa.cfg
dest : /u0/miatest/miatestappl/mwa/11.5.0/secure/miatest_tclg-dgstdby/mwa.cfg
backup : /u0/miatest/miatestappl/mwa/11.5.0/secure/miatest_tclg-dgstdby/mwa.cfg to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/mwa0.cfg
setting permissions: 644
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/deviceIP.ini
dest : /u0/miatest/miatestappl/mwa/11.5.0/secure/deviceIP.ini
backup : /u0/miatest/miatestappl/mwa/11.5.0/secure/deviceIP.ini to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/deviceIP.ini
setting permissions: 644
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/deviceIP.ini
dest : /u0/miatest/miatestappl/mwa/11.5.0/secure/miatest_tclg-dgstdby/deviceIP.ini
backup : /u0/miatest/miatestappl/mwa/11.5.0/secure/miatest_tclg-dgstdby/deviceIP.ini to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/deviceIP0.ini
setting permissions: 644
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/device.cfg
dest : /u0/miatest/miatestappl/mwa/11.5.0/secure/device.cfg
backup : /u0/miatest/miatestappl/mwa/11.5.0/secure/device.cfg to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/device.cfg
setting permissions: 644
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/device.cfg
dest : /u0/miatest/miatestappl/mwa/11.5.0/secure/miatest_tclg-dgstdby/device.cfg
backup : /u0/miatest/miatestappl/mwa/11.5.0/secure/miatest_tclg-dgstdby/device.cfg to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/device0.cfg
setting permissions: 644
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/mwamscasvc.sql
dest : /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby/mwamscasvc.sql
backup : /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby/mwamscasvc.sql to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/mwamscasvc.sql
setting permissions: 600
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/mwamscasvc.sh
dest : /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby/mwamscasvc.sh
backup : /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby/mwamscasvc.sh to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/mwamscasvc.sh
setting permissions: 700
setting ownership: applmgr:dba
instantiate file:
source : /u0/miatest/miatestappl/mwa/11.5.0/admin/template/mwactl.sh
dest : /u0/miatest/miatestappl/mwa/11.5.0/bin/mwactl.sh
backup : /u0/miatest/miatestappl/mwa/11.5.0/bin/mwactl.sh to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/mwactl.sh
setting permissions: 774
setting ownership: applmgr:dba
AutoConfig Profile Phase
Running Profile Process 1 of 1 for MWA_TOP
Executing script in InstantiateFile:
+/u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby/mwamscasvc.sh+
script returned:
mwamscasvc.sh started at Thu Jan 22 09:31:07 AST 2009
SQL*Plus: Release 8.0.6.0.0 - Production on Thu Jan 22 09:31:07 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
Enter value for 1: Enter value for 2: Enter value for 3: Enter value for 4: ERROR:
ORA-12537: TNS:connection closed
mwamscasvc.sh exiting with status 1
+.end std out.+
+.end err out.+
Processing DriverFile = /u0/miatest/miatestappl/cn/11.5.0/admin/driver/cntmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CN_TOP
Processing DriverFile = /u0/miatest/miatestappl/csi/11.5.0/admin/driver/csitmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CSI_TOP
Processing DriverFile = /u0/miatest/miatestappl/wip/11.5.0/admin/driver/wiptmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for WIP_TOP
Processing DriverFile = /u0/miatest/miatestappl/cse/11.5.0/admin/driver/csetmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CSE_TOP
Processing DriverFile = /u0/miatest/miatestappl/eam/11.5.0/admin/driver/eamtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for EAM_TOP
Processing DriverFile = /u0/miatest/miatestappl/imt/11.5.0/admin/driver/imttmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for IMT_TOP
Processing DriverFile = /u0/miatest/miatestappl/fte/11.5.0/admin/driver/ftetmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for FTE_TOP
Processing DriverFile = /u0/miatest/miatestappl/ont/11.5.0/admin/driver/onttmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for ONT_TOP
Processing DriverFile = /u0/miatest/miatestappl/ar/11.5.0/admin/driver/artmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AR_TOP
Processing DriverFile = /u0/miatest/miatestappl/ahl/11.5.0/admin/driver/ahltmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AHL_TOP
Processing DriverFile = /u0/miatest/miatestappl/ozf/11.5.0/admin/driver/ozftmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for OZF_TOP
Processing DriverFile = /u0/miatest/miatestappl/ies/11.5.0/admin/driver/iestmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for IES_TOP
instantiate file:
source : /u0/miatest/miatestappl/ies/11.5.0/admin/template/cooper.sh
dest : /u0/miatest/miatestappl/ies/11.5.0/admin/install/miatest_tclg-dgstdby/cooper.sh
backup : /u0/miatest/miatestappl/ies/11.5.0/admin/install/miatest_tclg-dgstdby/cooper.sh to /u0/miatest/miatestappl/admin/miatest_tclg-dgstdby/out/01220929/cooper.sh
setting permissions: 755
setting ownership: applmgr:dba
Processing DriverFile = /u0/miatest/miatestappl/csd/11.5.0/admin/driver/csdtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CSD_TOP
Processing DriverFile = /u0/miatest/miatestappl/igc/11.5.0/admin/driver/igctmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for IGC_TOP
Product Top Drivers executed : AD_TOP FND_TOP ICX_TOP IEO_TOP ABM_TOP ECX_TOP BIS_TOP GL_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL_TOP OKS_TOP CSF_TOP XNC_TOP IGS_TOP IBY_TOP PA_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP IMT_TOP FTE_TOP ONT_TOP AR_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOP
+===========================================================================+
Starting Restore Profile utility at Thu Jan 22 09:31:08 AST 2009
Using version 115.6
ADX Database Utility
getConnection() -->
sDbHost : tclg-dgprime
sDbDomain : tclgroup.com
sDbPort : 1563
sDbSid : miatest
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@tclg-dgprime.tclgroup.com:1563:miatest
Exception occurred: java.sql.SQLException: Io exception: Got minus one from a read call
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=tclg-dgprime.tclgroup.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=miatest)))
Exception occurred: java.sql.SQLException: Io exception: Got minus one from a read call
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=tclg-dgprime.tclgroup.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=miatest.tclgroup.com)))
Exception occurred: java.sql.SQLException: Io exception: Got minus one from a read call
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
+ Verifying connection to the Database : Could not be stablished+
+ No Restore Profile file created.+
Restore Profile utility ran successfully
+===========================================================================+
+[AutoConfig Error Report]+
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
+<filename> <phase> <return code where appropriate>+
+[SETUP PHASE]+
AutoConfig could not successfully execute the following scripts:
Directory: /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby
adgendbc.sh INSTE8_SETUP 1
afcpnode.sh INSTE8_SETUP 1
afgcsreg.sh INSTE8_SETUP 1
txkMultinode.sh INSTE8_SETUP 1
Directory: /u0/miatest/miatestora/iAS/Apache/perl/bin/perl -I /u0/miatest/miatestora/iAS/Apache/perl/lib/5.00503 -I /u0/miatest/miatestora/iAS/Apache/perl/lib/site_perl/5.005 -I /u0/miatest/miatestappl/au/11.5.0/perl /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby
txkFrmUTF8.pl INSTE8_SETUP 1
+[PROFILE PHASE]+
AutoConfig could not successfully execute the following scripts:
Directory: /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby
abmwebprf.sh INSTE8_PRF 1
afadmprf.sh INSTE8_PRF 1
afcpctx.sh INSTE8_PRF 1
afcpgsm.sh INSTE8_PRF 1
affrmprf.sh INSTE8_PRF 1
afwebprf.sh INSTE8_PRF 1
amswebprf.sh INSTE8_PRF 1
csfwebprf.sh INSTE8_PRF 1
ibywebprf.sh INSTE8_PRF 1
icxwebprf.sh INSTE8_PRF 1
jtfictx.sh INSTE8_PRF 1
+[APPLY PHASE]+
AutoConfig could not successfully execute the following scripts:
Directory: /u0/miatest/miatestora/iAS/Apache/perl/bin/perl -I /u0/miatest/miatestora/iAS/Apache/perl/lib/5.00503 -I /u0/miatest/miatestora/iAS/Apache/perl/lib/site_perl/5.005 -I /u0/miatest/miatestappl/au/11.5.0/perl /u0/miatest/miatestcomn/admin/install/miatest_tclg-dgstdby
adadmat.pl INSTE8_APPLY 256
txkGenExtSecConf.pl INSTE8_APPLY 1
AutoConfig is exiting with status 18
Thanks, Lia.
Similar Messages
-
I've been trying fresh installation of SQL Server 2008 R2 enterprise on Windows Server 2012 R2 standard VM server several times for two weeks, but always get the error "Attempted to perform an unauthorized operation". At first, I attempted
to install all features, but failed several times. So I decided to try install just Database Engine service, and still fail at the SqlBrowserConfigAction_Install_ConfigNonRC_Cpu32, with the error "Attempted to perform an unauthorized operation".
I remote login to server with my admin domain account. This account is in server local Administrators group. I
1. Right-click on setup.exe file | properties | Compatibility tab | select compatibility to Windows 8.Then click OK.
2. Right-click on setup.exe file | Run as Administrator, to start the Installation Center.
I have the document of my installation steps and zip file of the installation logs, if you need to take a look.
Appreciate for any help!
ntthHi ntth,
"Attempted to perform an unauthorized operation"
The above error is always related to the Windows account SID mapping. I recommend you login into Windows using another Windows account which has administrative privileges and run SQL Server setup using that Windows account.
Besides, please note that we need to apply SQL Server 2008 R2 Service Pack 2 or a later update when installing SQL Server Windows Server 2012 R2. For more information, please review this
KB article.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
An error occurred while attempting to perform the operation.
Hi All,
I am getting an error while running the report:
"An error occurred while attempting to perform the operation. Then operation did not complete successfully."
Although I can see the data coming is correct, but don't know why this error is coming.
I have seen for NULL values.
How can I see the detail log to trace the error?
Please help.
Thanks,
Himanshu TiwariHi,
You can login as system using SQLPlus and use the DBMS_SYSTEM.set_sql_trace_in_session procedure to set trace on another Discoverer session. This should establish if there is any database error occuring in the Discoverer session.
Rod West -
Hi,
Im trying to use web service in c# sql database project. when running stored procedure, in which the web service should be called, im getting this error:
System.TypeInitializationException: The type initializer for 'System.ServiceModel.ClientBase`1' threw an exception. ---> System.Security.HostProtectionException: Attempted to perform an operation that was forbidden by the CLR host.
at System.ServiceModel.DiagnosticUtility.GetUtility()
at System.ServiceModel.DiagnosticUtility.get_Utility()
at System.ServiceModel.ClientBase`1..cctor()
The protected resources (only available with full trust) were:
All
The demanded resources were:
Synchronization, ExternalThreading
--- End of inner exception stack trace ---
at System.ServiceModel.ClientBase`1.InitializeChannelFactoryRef()
at System.ServiceModel.ClientBase`1..ctor()
at UMGClient..ctor()
at UMG_StoredProcedures.spUMG_ProcessEmail(SqlInt64 cid_request)
Here is the code:
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
using CredexDB.Workflow;
using System.Collections.Generic;
using CredexDB.umgwcftest;
public partial class UMG_StoredProcedures
/// <summary>
/// </summary>
/// <param name="bankDate"></param>
/// <param name="stateCategory"></param>
[Microsoft.SqlServer.Server.SqlProcedure]
public static void spUMG_ProcessEmail( SqlInt64 cid_request )
SqlConnection conn = new SqlConnection("Context Connection=true;");
conn.Open();
try
SqlContext.Pipe.Send("A");
UMGClient umgcl = new UMGClient();
SqlContext.Pipe.Send("B");
UMGwcf.SoapExchangeMailMessage email = new UMGwcf.SoapExchangeMailMessage();
string[] names = new string[1];
names[0] = "[email protected]";
email.To = names;
email.Subject = "Test UmgWcf";
email.MessageBody = "Testovacia správa - ľľššččťťťýéáí";
email.From = "[email protected]";
email.Priority = 20;
email.Sender = 1;
email.DoNotArchive = false;
email.EncryptAndSign = false;
//long ret = umgcl.SendMailMessage(email);
catch (Exception e)
SqlContext.Pipe.Send("C");
SqlContext.Pipe.Send(e.ToString());
finally
SqlContext.Pipe.Send("D");
conn.Close();
private static void execSql(string sql, SqlConnection conn)
new SqlCommand(sql, conn).ExecuteNonQuery();
The error occurs at this row:
UMGClient umgcl = new UMGClient();
Here is the UMG class:
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "3.0.0.0")]
[System.ServiceModel.ServiceContractAttribute(Namespace="vub.sk/UMGwcf", ConfigurationName="IUMG")]
public interface IUMG
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/SendMailMessage", ReplyAction="vub.sk/UMGwcf/IUMG/SendMailMessageResponse")]
long SendMailMessage(UMGwcf.SoapExchangeMailMessage message);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/ResendEmailMessage", ReplyAction="vub.sk/UMGwcf/IUMG/ResendEmailMessageResponse")]
long ResendEmailMessage(long emailid);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/GetEmailById", ReplyAction="vub.sk/UMGwcf/IUMG/GetEmailByIdResponse")]
UMGwcf.SoapDeliveredMailMessage GetEmailById(long emailid);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/SendSMSMessage", ReplyAction="vub.sk/UMGwcf/IUMG/SendSMSMessageResponse")]
long SendSMSMessage(UMGwcf.SoapSMSMessage smsmessage);
[System.ServiceModel.OperationContractAttribute(Action="vub.sk/UMGwcf/IUMG/GetSMSById", ReplyAction="vub.sk/UMGwcf/IUMG/GetSMSByIdResponse")]
UMGwcf.SoapDeliveredSMSMessage GetSMSById(long smsid);
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "3.0.0.0")]
public interface IUMGChannel : IUMG, System.ServiceModel.IClientChannel
[System.Diagnostics.DebuggerStepThroughAttribute()]
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "3.0.0.0")]
public partial class UMGClient : System.ServiceModel.ClientBase<IUMG>, IUMG
public UMGClient()
public UMGClient(string endpointConfigurationName) :
base(endpointConfigurationName)
public UMGClient(string endpointConfigurationName, string remoteAddress) :
base(endpointConfigurationName, remoteAddress)
public UMGClient(string endpointConfigurationName, System.ServiceModel.EndpointAddress remoteAddress) :
base(endpointConfigurationName, remoteAddress)
public UMGClient(System.ServiceModel.Channels.Binding binding, System.ServiceModel.EndpointAddress remoteAddress) :
base(binding, remoteAddress)
public long SendMailMessage(UMGwcf.SoapExchangeMailMessage message)
return base.Channel.SendMailMessage(message);
public long ResendEmailMessage(long emailid)
return base.Channel.ResendEmailMessage(emailid);
public UMGwcf.SoapDeliveredMailMessage GetEmailById(long emailid)
return base.Channel.GetEmailById(emailid);
public long SendSMSMessage(UMGwcf.SoapSMSMessage smsmessage)
return base.Channel.SendSMSMessage(smsmessage);
public UMGwcf.SoapDeliveredSMSMessage GetSMSById(long smsid)
return base.Channel.GetSMSById(smsid);
the CLR where created as follows:
ALTER DATABASE XXXX SET TRUSTWORTHY ON;
CREATE ASSEMBLY [System.ServiceModel]
FROM 'C:\ttrojcak\System.Runtime.Serialization.dll'
WITH PERMISSION_SET = UNSAFE
CREATE ASSEMBLY [System.ServiceModel]
FROM 'C:\ttrojcak\System.ServiceModel.dll'
WITH PERMISSION_SET = UNSAFE
the message window shows warnings:
Warning: The Microsoft .NET Framework assembly 'system.servicemodel, version=3.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.drawing, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.directoryservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.directoryservices.protocols, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.enterpriseservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.runtime.remoting, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization.formatters.soap, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'accessibility, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.drawing.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.web.regularexpressions, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.serviceprocess, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.configuration.install, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.identitymodel, version=3.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.messaging, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'system.identitymodel.selectors, version=3.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
Warning: The Microsoft .NET Framework assembly 'microsoft.transactions.bridge, version=3.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
creating store procedure:
EXEC sp_executesql N'
CREATE PROCEDURE [spUMG_ProcessEmail]
@cid_request bigint
AS
EXTERNAL NAME [CredexDB].[UMG_StoredProcedures].[spUMG_ProcessEmail]'
IF (@@ERROR = 0)
BEGIN
DECLARE @procSchema sysname
DECLARE @procName sysname
SELECT @procSchema = SCHEMA_NAME(schema_id), @procName = name
FROM sys.objects
WHERE object_id = OBJECT_ID(N'[spUMG_ProcessEmail]')
EXEC sp_addextendedproperty 'AutoDeployed', N'yes',
'SCHEMA', @procSchema,
'PROCEDURE', @procName
EXEC sp_addextendedproperty 'SqlAssemblyFile', N'UMG\UMG.cs',
'SCHEMA', @procSchema,
'PROCEDURE', @procName
EXEC sp_addextendedproperty 'SqlAssemblyFileLine', 95,
'SCHEMA', @procSchema,
'PROCEDURE', @procName
END
Any tips?
Thank youand this moves me to another problem. the stored procedure spUMG_ProcessEmail is unable to find and read app.config
stored procedure is unable to read app.config. it is necesary to rewrite the xml config into c# code:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_IUMG" closeTimeout="00:01:00"
openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536"
messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered"
useDefaultWebProxy="true">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<security mode="None">
<transport clientCredentialType="None" proxyCredentialType="None"
realm="" />
<message clientCredentialType="UserName" algorithmSuite="Default" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://umgwcftest/UMGwcf.svc" binding="basicHttpBinding"
bindingConfiguration="BasicHttpBinding_IUMG" contract="IUMG"
name="BasicHttpBinding_IUMG" />
</client>
</system.serviceModel>
</configuration>
and the rewrited code:
BasicHttpBinding myBinding = new BasicHttpBinding();
myBinding.Name = "BasicHttpBinding_IUMG";
myBinding.CloseTimeout = new TimeSpan(00, 01, 00);
myBinding.OpenTimeout = new TimeSpan(00, 01, 00);
myBinding.ReceiveTimeout = new TimeSpan(00, 10, 00);
myBinding.CloseTimeout = new TimeSpan(00, 01, 00);
myBinding.AllowCookies = false;
myBinding.BypassProxyOnLocal = false;
myBinding.HostNameComparisonMode = HostNameComparisonMode.StrongWildcard;
myBinding.MaxBufferSize = 65536;
myBinding.MaxBufferPoolSize = 524288;
myBinding.MaxReceivedMessageSize = 65536;
myBinding.MessageEncoding = WSMessageEncoding.Text;
myBinding.TextEncoding = System.Text.Encoding.UTF8;
myBinding.TransferMode = TransferMode.Buffered;
myBinding.UseDefaultWebProxy = true;
myBinding.ReaderQuotas.MaxDepth = 32;
myBinding.ReaderQuotas.MaxStringContentLength = 8192;
myBinding.ReaderQuotas.MaxArrayLength = 16384;
myBinding.ReaderQuotas.MaxBytesPerRead = 4096;
myBinding.ReaderQuotas.MaxNameTableCharCount = 16384;
myBinding.Security.Mode = BasicHttpSecurityMode.None;
myBinding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None;
myBinding.Security.Transport.ProxyCredentialType = HttpProxyCredentialType.None;
myBinding.Security.Transport.Realm = "";
myBinding.Security.Message.ClientCredentialType = BasicHttpMessageCredentialType.UserName;
myBinding.Security.Message.AlgorithmSuite = System.ServiceModel.Security.SecurityAlgorithmSuite.Default;
EndpointAddress endPointAddress = new EndpointAddress(new Uri("http://umgwcftest/UMGwcf.svc"));
SqlContext.Pipe.Send("2");
UMGClient umgcl = new UMGClient(myBinding, endPointAddress);
after that, I got another error and it's solution is here:
error and solution
So I got it finaly working -
Error occurred in deployment step 'Add Solution': Attempted to perform an unauthorized operation.
Hello,
I'm new to SharePoint development. I just created a empty sharepoing app in VS2010, added a webpart and in .cs file of this webpart, add hello inside RenderContents. Its compiling fine. but giving following error while deploying
Error occurred in deployment step 'Add Solution': Attempted to perform an unauthorized operation.
My VS 2010 is running under Administrator privileges & I'm admin to this machine.
Comments?Hi, just had the same problem (on a 2013 enviroment) and was able to solve it partly by this post.
Also experience a problem with dublicate ports, see here: http://technicaltrix.blogspot.dk/2014/11/error-occurred-in-deployment-step-add.html
http://technicaltrix.blogspot.dk/ -
Hi,
I'm unable to deploy a custom workflow/ visual web part or anything using Visual Studio.
Here is the Output trace:
------ Build started: Project: TestWorkflow, Configuration: Debug Any CPU ------
TestWorkflow -> E:\Codes\TestWorkflow\TestWorkflow\bin\Debug\TestWorkflow.dll
Successfully created package at: E:\Codes\TestWorkflow\TestWorkflow\bin\Debug\TestWorkflow.wsp
------ Deploy started: Project: TestWorkflow, Configuration: Debug Any CPU ------
Active Deployment Configuration: Default
Run Pre-Deployment Command:
Skipping deployment step because a pre-deployment command is not specified.
Recycle IIS Application Pool:
Recycling IIS application pool 'SharePoint - 1111'...
Retract Solution:
Retracting solution 'Testworkflow.wsp'...
Deleting solution 'Testworkflow.wsp'...
Add Solution:
Adding solution 'TestWorkflow.wsp'...
Deploying solution 'TestWorkflow.wsp'...
Activate Features:
Activating feature 'Feature1' ...
Error occurred in deployment step 'Activate Features': Attempted to perform an unauthorized operation.
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========
Points to be noted:
I have opened the visual studio using the System Account and "Run as Administrator".
I checked the User policy for the particular web app and it has Full read and Full control for the System account
I checked SharePoint administration under services and verified the system account credientials.
Can you please help me solving this.
Thanks,
SachinPlease try giving permissions
pen the SharePoint 2010 Central
Administration.
- Go to Application Management
–> Change site collection administrations
- Select the correct site
collection and type your windows account as the secondary site collection administrator.
- Try deploying now, it should work.
or
You can grante permissions in "SITE ACTIONS > SITE PERMISSIONS"
Ref :http://learnsharepointwithme.blogspot.in/2013/04/error-occurred-in-deployment-step.html
Please remember to click 'Mark as Answer' on the answer if it helps you -
I attempted to perform the itunes update on two different PCs. Itunes will no longer open and prompted me to reinstall itunes. The reinstall did not work after several attempts and I received an error: "Runtime error R6034. An application has made an attempt to load the C Runtime library incorrectly. Please contact the application's support team for more information." Has anyone else had this issue? How can I resolve it?
I've been having the same exact problem this morning, and from the looks of it a lot of other people are posting about this issue, so I don't know if it's maybe something wrong with the download but I'm just relieved that it seems to be that instead of a corruption issue with my windows installation. I'm just wondering how long this will take to be resolved.
-
Attempted to perform an unauthorized operation error on windows 8.1 while installing SQL server 2008
Hi,
I am getting the error "Attempted to perform an unauthorized operation" on windows 8.1 while installing
SQL server 2008.
The specific error is The error is Attempted to perform an unauthorized operation."
at stepSqlBrowserConfigAction_install_ConfigNonRC_Cpu32 .
I have tried everything from copying to the C drive. I am the admin on the machine. I also checked access in registry. It already has acesss to HKLM\System\CurrentControlSet\Control\WMI\security
Can someone comment on how to resolve this issue. I also tried NT
AUTHORITY\SYSTEM but getting the same error.
Any help would be appreciated.Hello,
Please note that SQL Server 2008 requires Service Pack 3 (SP3) to make it compatible with
Windows 8.1. Please perform an slipstream installation of SQL Server 2008 + SP3:
http://support.microsoft.com/kb/955392
If it fails again, please share with us the Summary.txt log file and the details.txt log file. The following article
may help you locate those files on disk::
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.100).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Develop tab not working. Error msg "?;0: attempt to perform arithmetic on a string value" Help!
I continue to get the error msg "?;0: attempt to perform arithmetic on a string value" when clicking on the 'Develop' tab in LR. I've uninstalled and reinstalled the software 3 times from the original disc. I'm in the middle of a wedding edit. Help!
It sounds like you might have a corrupted preset.
Here's something you could try:
Go to your Preferences/Presets tab and push the Show Lightroom Presets Folder button.
Then close Lightroom and temporarily rename that folder. If the problem goes away, one of your presets is bad. Otherwise name the folder back to what it was and let us know what happened.
Hal -
SQL Server 2008 Developer install failed - Attempted to perform an unauthorized operation
I'm trying to install SQL Server 2008 Developer edition on my laptop running Windows XP Professional SP2. I ran the installer as a domain user with admin rights to the local box. The installation advisor program certified that my system was ready for the install, but nevertheless I had to uninstall SQL Server 2005 Express edition and install .NET framework 3.5 SP1 first. Once that was done, the installer finished, having successfully installed all the components of SQL Server 2008 except for the core database engine. It failed with this error message: Attempted to perform an unauthorized operation.
I uninstalled SQL Server 2008 and reinstalled with the same results.
Below is a snippet from my C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081014_203925\Detail.txt which seems like it may be relevant.
Can anyone offer any assistance? Would be greatly appreciated.
2008-10-14 20:50:15 SQLEngine: --EtwSetup: Updating WMI Security
2008-10-14 20:50:15 SQLEngine: --EtwSetup: WMI sddlA;;0x120fff;;;SY)(A;;0x120fff;;;BA)
2008-10-14 20:50:15 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2008-10-14 20:50:15 Slp: Sco: Attempting to open registry subkey SYSTEM\CurrentControlSet\Control\WMI\Security
2008-10-14 20:50:15 Slp: Prompting user if they want to retry this action due to the following failure:
2008-10-14 20:50:15 Slp: ----------------------------------------
2008-10-14 20:50:15 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2008-10-14 20:50:15 Slp: Inner exceptions are being indented
2008-10-14 20:50:15 Slp:
2008-10-14 20:50:15 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2008-10-14 20:50:15 Slp: Message:
2008-10-14 20:50:15 Slp: Attempted to perform an unauthorized operation.
2008-10-14 20:50:15 Slp: Data:
2008-10-14 20:50:15 Slp: WatsonData = HKEY_LOCAL_MACHINE@SYSTEM\CurrentControlSet\Control\WMI\Security
2008-10-14 20:50:15 Slp: DisableRetry = true
2008-10-14 20:50:15 Slp: Inner exception type: System.UnauthorizedAccessException
2008-10-14 20:50:15 Slp: Message:
2008-10-14 20:50:15 Slp: Attempted to perform an unauthorized operation.
2008-10-14 20:50:15 Slp: Stack:
2008-10-14 20:50:15 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
2008-10-14 20:50:15 Slp: ----------------------------------------
2008-10-14 20:50:31 Slp: User has chosen to cancel this actionHi,
I have recently donwloaded the evaluation version of SQL SERVER 2010. I have a similar problem to this user as shown below. I have tried changing the registry permissions for Microsoft SQL Server but this made no difference. Since the registry entries are created by the installation process it seems odd that it cannnot subsequently update the entry.
Any ideas?
Dominic
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xD3BEBD98@1211@1
Configuration error description: Attempted to perform an unauthorized operation.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100408_135119\Detail.txt
2010-04-08 14:01:43 Slp: ----------------------------------------
2010-04-08 14:01:43 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2010-04-08 14:01:43 Slp: Inner exceptions are being indented
2010-04-08 14:01:43 Slp:
2010-04-08 14:01:43 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2010-04-08 14:01:43 Slp: Message:
2010-04-08 14:01:43 Slp: Attempted to perform an unauthorized operation.
2010-04-08 14:01:43 Slp: Data:
2010-04-08 14:01:43 Slp: WatsonData = Microsoft SQL Server
2010-04-08 14:01:43 Slp: DisableRetry = true
2010-04-08 14:01:43 Slp: Inner exception type: System.UnauthorizedAccessException
2010-04-08 14:01:43 Slp: Message:
2010-04-08 14:01:43 Slp: Attempted to perform an unauthorized operation.
2010-04-08 14:01:43 Slp: Stack:
2010-04-08 14:01:43 Slp: at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2010-04-08 14:01:43 Slp: at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2010-04-08 14:01:43 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2010-04-08 14:01:43 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2010-04-08 14:01:43 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2010-04-08 14:01:43 Slp: ---------------------------------------- -
An error occured while attempting to perform the operation.
Hi
I'm getting the following error message in my disco plus report.
"An error occured while attempting to perform this action. The operation did not complete successfully.
Extra Internal info:
(OLException
Cause:OLException {
Code: OLCmRefException::eNullRef
Args: OLCmRefException::eNullRef
I have searched the forum but have found no usefull information for me.
The problem occured when I added a calculation to woorkbook that was working perfectly fine before. Now I can't even remove any item or calculation (or anything) from the worksheet.
I then edited the calculation to just show "1" instead which allowed me to remove that certain calculation, but I can still not remove any item.
Please ask if more details are needed.
What can have caused this problem, and is there a way to solve it? Do I have to redo the entire report?
BR
RobertRobert,
We encountered this issue with our 10.1.2.54.25 installation on a Solaris OS. We are currently at CP3. We have tried CP4, 5, 6 and 7. No resolution. Oracle has replicated our issue assigned a bug # and say that they have found a fix but it will not be made available until the release of 10.1.2.3 CP2. We have requested a one-off patch for 10.1.2.54.25 CP7. They are currently thinking about it. We have been hung up since Feb. '08 and not be able to resolve any bugs because of this problem.
Jerre -
I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!
From an existing Discussion:
Go to Safari --> Preferences
Click Security
Show Cookies
Type "apple.com" in to top search field
Select All
Click Remove
Click Done
Repeat the above to confirm they are gone (mine took two attempts)
Choose Update Genius again in iTunes.
iTunes 9 - can't update genius https://discussions.apple.com/thread/2151150 -
I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files. Additionally, repeated attempts to perform available updates have failed. The laptop has Windows 8.1 64Bit.
I don't know who you talked to, but some of the support techs tend to look at CS5 as "no longer sold or supported" and usually don't want to mess with it.
We are mostly user-volunteers and have time to help you out. Some of us get perks from Adobe, but we are not employees.
I actually gave you the links to the two very important CS5 updates, but you want to peruse this general list Adobe - Photoshop : For Windows
and get the Bridge CS5 updates as well. Adobe - Bridge : For Windows -
After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer. I receive "FIle Save As - Not Responding"
I think you may be correct. It is coincidental with my upgrade to Adobe Reader 11.0.10.
I have installed IE 11 (11.0.9600.17690)
It may be an Adobe Reader problem in that the "tools/file save as" dialog is completely empty. No local directories are displayed for saving to. When I try to Close(X) the "File Save As" box it pops up a message box on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I need to go go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message. -
When attempting to perform updates on my iphone, it asks for credit card information. I give them the information directly from the card but then it tells me that the security code is invalid. I have rechecked the information several times which also includes reentering the card info and still it says its wrong. What do I do?
Contact iTunes store support: http://www.apple.com/emea/support/itunes/contact.html.
Maybe you are looking for
-
Please help. Replaced broken phone w/new 4s. I did as the genius bar guy said and did reset>erase all content and settings at home because he said it would take too long in the store. Last time I had to replace my phone, all the photos and video w
-
hi i was just wondering how do i get rid of viruses?! Everytime i go on safari my computer goes all weird and starts to pop up with other internet sites without me even typing it in. My arrow also starts to click on all things that i didn't even clic
-
Change the database log on parameters in the run time with CR10 Delphi2007?
Hi, I'm using crystal report 10 and Crystal VCL for Delphi. How can I change the database log on parameters in the run time?
-
How to get cost center ranges for a given company and division...
Hello Experts, Is there a table, BAPI or FM that can get the company or division of a given cost center? Currently I am creating cost center ranges in my program but that is not the best way to do it since they can always add or delete cost centers.
-
Encoding with HV20 in PPCS3: Bad quality at 1MB bitrate
Hello, When I encode my video from my hv20 (1920 x 1080 - 30p) with PPCS3 using H.264 at Bitrate 2MB I get very good results. However when I choose 1MB the video quality is very pixelated and distorted. When I use my Panasonic HMC-150 I can encode at