Audigy and Playstat

Just a quick random question.
Is it possible to connect an Audigy 2 NX with Playstation 2 to get 5. surround WITHOUT a computer, or do I still need to run the NX off of my PC?

Brianloewen,
No, this is not supported by the Audigy 2 NX in either case. The unit doesn't work standalone, but it will not decode sound from an external source when used on the PC either.
If you have a desktop system I'd recommend one of the regular Audigy range, such as the Audigy 2 ZS Platinum.
Cat

Similar Messages

I have a Motorola SB6141 modem that is connected to a time capsule. I am unable to connect to the internet on my laptop and playstation 3

Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
I am unable to connect to my internet via. wifi on my Playstation.
I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
Please help?
I tried being the most descriptive I could

I am only able to connect to the internet on my main computer.
What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
When you open the airport utility on the main computer.. click on the TC what errors does it show?
They will list in the summary.
What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
What model TC do you have??
You can slow the LAN port down or specify the actual speed in the Gen1-4.

Xbox Live and Playstation Network keeps lagging/dr...

I am starting to get really annoyed now at the fact that since Sunday the 2nd of November I have had constant problems with my BT Infinity lagging and dropping connection with my Xbox 360 and Playstation 3. Their are other devices connected to my HH3 and they don't lose connection ever, they have just recently received slow speeds.
I have tried the usual restart the router etc many times and still nothing, I have an Open NAT on both consoles. So I know this is not the issue. I have read the forums a lot lately and noticed that other people in the North East of England are experiencing the same gaming problems as me.
All the service checkers state that everything is fine with my connection when it clearly isn't. I have spoke to someone at BT in the online support chat and they said they aren't trained to deal with this problem and are expecting me to pay on top of the £40 a month I am paying for the BT Infinity service I am not getting, in order for someone else at BT to have a look at my problem.
I have seen somewhere on the forums that people have been told it is a Routing issue that will be fixed in 24 hours, the post was yesterday and still no fix as of yet.
Will someone at BT be able to tell me what the problem is exactly and when they are going to fix it?

Plusnet is a BT Group company, but has no connection with BT Retail, BT Wholesale or Openreach.
Plusnet offer their own services which cater for people with specific requirements, that do not fall within many other ISPs offerings.
DAZAD, This forum is moderated, so some of your posts are awaiting moderation. While this happens, you may like to read the forum rules regarding the nature of posts.
You may be interested in the Plusnet User forum here http://community.plus.net/forum/
I am sure they would like your opinion of their services.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Sound Blaster Audigy and STAL

I've got the following problem. In game called "S. T.A.L.K.E.R" i can hear very lound sounds of shooting and very silence people conversations.
I've got "Sound Blaster Audigy" and Creative Speakers.

Hi,
There are several choices if it comes to Audigy (emu0kx) drivers;
First you can use the last official Creative Labs' driver for the Audigy series which you can download on the official driver download site here at Creative Labs' site, but you will loose a lot of apps/softwares, but it should work;
The second one would be the mentioned Daniel_K's driverpack 3.8 for the Audigy series which works pretty good, although I dislike the individual installers/uninstallers for each applications which makes uninstallation of the driver very annoying.
The third one would be the Project KX driver which is very light in size but very powerful, especially for recording and other music related purposes. There's a learning curve since it really looks different (interfaces for example), but once you have found out how the KX driver works you will be happy you own an genuine Audigy emu0kx soundcard.

Soundblaster Audigy and Windows

I've just installed Windows XP on a new hard dri've. I'm running an older computer with a 700mhz Celeron processor with an Audigy soundcard. On Windows ME it worked fine, but since upgrading, sounds work fine, but when I try playing music of any kind it locks my machine up so bad I have to shut it down manually. I've tried reinstalling Windows and the soundcard drivers, and nothing works. Is there a known issue with the Audigy and Windows XP?
I'm greatful for anything you can tell me, I'm at a loss.
Thank you

Why bother with Microsoft?
They didn't even add in 6. in Windows XP
Seriously, use Creative Speaker Settings.

Audigy and ddts-

After i opened the box today and hooked up the ddts to my promedia 5. ultras....i was very happy. I am running my ps2 into it with a toslink, and it sounds great. I have a audigy regular (mp3 or gamer), and the only setup I can get to work with it is with the digital coax and the converter to /8, HOWEVER, when using the digital coax i do NOT have the option of anything but stereo! I got the ddts mainly for up-mixing my mp3s. Can you get anything else (ie prologic, or neo6? is there a better way to hook them up? I tried using an old cable i had laying around from an old minidisk player that has one side /8th and the other toslink, however I'm not sure if it even works correctly in this application. I tried hooking up from the audigy to the ddts with a /8th to rca, and could not get any sound, except for some buzzing in the center channel. I also recieved today my creative audigy 2 zs notebook, however my dell inspiron 9200 wont get here for a few days . Will I have similiar problems with this? If it turns out my toslink to /8th cable is faulty my plan was to go buy a toslink cable and the /8th converter and use it that way. Will that work properly with my new notebook and/or my current desktop? My goal was to have all three components (ps2, notebook, desktop) hooked up digitally (I love anything and everything 5., including my mp3s). Should I be having this problem with my audigy and the digital coax? Should the /8th to rca work?
Thanks a lot,
Mike

Analog output on the soundcard --> DDTS-100 switchbox
Switchbox --> DDTS-100 main unit
Switchbox --> Speakers
Digital out on the soundcard --> Coaxial input on the DDTS-100 main unit
The digital output on the soundblaster can ONLY SEND OUT EITHER A PCM STEREO SIGNAL OR AN ENCODED DATA STREAM (AC-3). In order to make the DDTS-100 decode the data stream correctly you MUST have the software set to SPDIF passthrough and also have that set in the Audio HQ or the Audio console. Put the switchbox to decoder mode. The only way to light up the lights of the DTS and Dolby Digital is to feed the main unit with an encoded data stream of those sound formats. If you try to play anything and put it through the digital out that is not DTS or DD you are going to get... Stereo.
In order to get sound from the side speakers you must first set the switch on the back of the DDTS-100 main unit to 6.1/7.1 and set the upmix to 5.1-->7.1 or 6.1-->7.1 (depending on the source) on the main volume controller of the S750.
Message Edited by rico01 on 08-17-2005 09:38 PM

When will flash player be available for xbox and playstation

can someone help me. I would like to know when there will be a flash player for xbox and playstation? Thanks

Please see our roadmap for information about the future of Flash Player. As of yet, no announced support for Playstation, Xbox or Wii.
http://www.adobe.com/devnet/flashplatform/whitepapers/roadmap.html

Conflict between audigy and Olympus voice recor

I have an audigy se recently installed. Seemed to be working fine until I opened my Olympus voice recorder program. Just opening the program knocked out the sound card and I could not get it back again. No speakers in any application on the computer except the diagnostic test. Then the speakers would play. But no cd's, no wav files, no nothing. Tried checking and unchecking all the boxes. There really aren't that many. Only way to solve the problem was to uninstall and reinstall audigy and not go to Olympus anymore. I've done that several times to confirm that is the problem.
Any suggestions?
(5. sourround)

Bazbear wrote:
Could anyone help me to resolve the conflict between my Soundblaster Audigy 2ZS and Norton antivirus. The auto protect feature is constantly being turned off on boot up. According to Symantec the problem is caused by conflict between the two soft wares. The Creative page does not mention this at all and the work around on the Symantec site either does not work or entails time wasting closing of programs and re-boots. It is really getting to me now and I wonder if any one knows of a permanent fix?
Bazbear
Some past post here mention of this too.....and the mods suggestion does indeed helped some of them resolve it. Perhaps you can try it. What you need to do is uninstall all Norton and Creative software. When you're done with that, install Creative software first follow by Norton stuff.

DVD+R works on Mac and Playstation but not a DVD or Bluray Player

I converted old VHS tapes to DVD for my Grandma, and I checked to make sure they worked using my Mac and Playstation. When I gave it to her neither her DVD or Bluray Player reads it. Is there a way to fix this? Also I had converted a wedding to dvd (using the same DVD+R) and the person said it works fine on their DVD player.
So do I need to own both +R and -R?

Found a solution to the problem. The permissions for the firefox.app file were not set to admin - read-write. After adding this permission using the get info menu item when right clicking the file name in the applications folder, the tab now automatically opens when clicking on Email link.

Is "Time capsule" and "Playstation 3" compatible?

Simple question: Is "Time capsule" and "Playstation 3" compatible?
will i be able to stream movies from the Capsule to my playstation wirelessly?

A 2nd external drive and a good piece of cloning software (I like CCC)

I cannot use apps on my ipod as when i turn on my ipod the wi-fi works but after a minute of 2 it stops working and then have to wait ages for it to work again. i have checked my internet but my laptop and playstation works work fine.

i cannot use apps on my ipod as when i turn on my ipod the wi-fi works but after a minute of 2 it stops working and then have to wait ages for it to work again. i have checked my internet but my laptop and playstation works work fine.

Try here
iOS: Troubleshooting applications purchased from the App Store

Is it possible to use an Audigy and Xfi at the same ti

Hello, this is my first post in the forums.
I have using Creative soundcards since many years ago, and all of them are working today.
Now, in my primary there is an Audigy, mainly used with Debian Linux, working wondefully, and some Windows time for games.
I'd like to use a Xfi, but the promised Linux compatibility is still on the horizon, so, is it possible to install a Xfi along my Audigy, using only the Audigy in Linux and the two soundcards on Windows (Xfi with headphones and Audigy with surround system Creative P580)?
Will there be a driver conflict of some sort (in Windows) ?

I'm running into the same problem. While it is possible to create an aggregate device using Apple's Audio MIDI setup utility, the Mac doesn't see both microphones. It only ever sees the second one that's plugged in.

Audigy and H

Hello all,
I bought an Audigy card yesterday. I'm trying to get audio from my PC into my Sharp Aquos.
I've got picture through the DVI/HDMI connector but no audio. I'm running a 3.5mm through to 2 RCA connectors into the TV.
I'm not getting any sound through the TV and i'm pretty sure the problem lies in the card or connectors.
Does anyone have any ideas as to how to get some sound out of this thing?

Hello all,
I bought an Audigy card yesterday. I'm trying to get audio from my PC into my Sharp Aquos.
I've got picture through the DVI/HDMI connector but no audio. I'm running a 3.5mm through to 2 RCA connectors into the TV.
I'm not getting any sound through the TV and i'm pretty sure the problem lies in the card or connectors.
Does anyone have any ideas as to how to get some sound out of this thing?

Mini and Playstation sharing a monitor

Hi
Currently we are using an old crt with our Mac Mini and an old television with our PlayStation. I would like to buy a new lcd display (2 different inputs) which could be shared with both the Mini and our PS2.
Does anyone use a setup like this? What display resolution do you recommend? What about the size, is 17" enough? Experiencies?
Mini Mac OS X (10.4.3)

I am using a Samsung 17" LCD TV in such an arrangement. I can't remember the model number of the Samsung, but it doesn' t matter because it is 3-years old and I am sure no longer for sale. The newer ones are better anyway, and cheaper. The display is 1280x768 which is pretty useable as a computer monitor through the VGA port. 17" is adequate for our setup but it really depends on how close you sit as to whether 17" will work for you. You'll probably want to go bigger if this is your primary TV.

Audigy and HL2/CSS 5.1 sou

I have an Audigy ES with the Jan 2th Vista beta drivers. I cannot get true 5. sound from Half Life 2 or CSS... for example when I do the sound test ingame, the 'Rear right, rear left' sound come out of the front speakers as well, which shows it is more like a stereo sound upmixed for all 6 speakers. Does HL2 require ALchemy to get true 5. Or is there no solution at the moment?It is also the same on my Realtek AC97 onboard.

Hello Deadly,?Go and get ALchemy and install it. then go into the program folder (of ALchemy) and copy the dsound.dll and dsound.ini to your Executable folder. Which should be something like C:/Program Files/Steam/Steamapps/(account name)/hl2.
Then modify the INI file and put the duratino to 5 and that should fix your problem.
Tried it on my CSS (not in game but rather the TEST YOUR SPEAKER button) and everything is back to normal after this.
Hope this helps

Audigy and Playstat

Similar Messages

Maybe you are looking for