Audigy se sb0570 win_7 32_bit

Good day,
I have two HP D330 Personal computers and I installed Windows 7 32 bit for an update.
The Audigy SE sb0570 does not work under Win_7. It seems to me that ths OS does note reconise the board because of the driver. The dri've I did use have been suggested by Creative ! ( see Creative site )
I am sure the two audio boards on my hands are working properly under windows XP sp2.
I do not have any valid help from Creative.
Any suggestion for me ?
Any particular procedure to follow ?
Any help is appreciated.
Thanks
Ambrogio

Since I have a Macbook Air and an iMac I have to wait to install the software. However, I spoke with Microsoft and they assured me that it will work & if it doesn't they will give it over to a senior engineer. As long as I have the original disk and serial number, they have no problem with it. BTW, just for your knowledge they have cleaned up their act and assist customers with reinstallation issues. So if you ever have a problem they will help you. I had a senior engineer that worked with my son's old laptop with Vista and scheduled phone calls at my convenience to troubleshoot. It's nice to know that Apple and Microsoft have made peace with each other......

Similar Messages

SB Audigy SE (SB0570) / Win 8.1 64bit completely freezes on sound playback

hi there,
I got a problem: my audigy se doesnt work on windows 8.1 64bit.
I freshened up my pc and installed a clean win 8.1 os on a new harddrive.
I tried installing the official SB24_PCDRV_LB_1_04_0090a.exe driver.
I got a audigy se (sb0570), and driver installation works fine. the card got recognized and it can play a sound, but after a few seconds my whole PC freezes without bluescreen. it doesnt matter if it is a flash video, a mp3 or just a windows sound; it always freezes. when the sound device is disabled, the system runs without freezes. I can start a playback, ofc there is no sound, but the system is stable.
my card works fine on win 7 64bit with older drivers. plus, I am using the support pack 2.6 by daniel_k (I still use my old SDD with win7 on it and everything works fine). I also tried support pack 2.6 on my win 8.1 system but it doesnt even recognize the card. the newer support pack 3.0 does recognize sb0570 and actually the sound works for about 10seconds (my 5.1 system works fine for that 10 sec, all speakers are getting a signal, but then it freezes...).
so, both the official and the unofficial drivers are not working.
has any1 a clue?

IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
blunden wrote:
EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
http://www.mediafire.com/download.php?rjmznqa2oy
Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
Fixes an issue that prevents Speaker Fill from working.
There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall.

Audigy SE SB0570 microphone impeda

I read previous threads and answers about the impedance (from Tiger) . Forgive me, just want to be sure and place my questions:?. for my Audigy SE SB0570 the microphone impedance is ~ 600 ohm, right?2. what is the approximate range of microhones impedance to work moreless correctly with Audigy ? - say?from 400 ohm to 800 ohms?Will be grateful for the comment.

John, thank you for the quick answer. At the moment I am using cheap EasyTouch microphone + headphones. My friends I talk on Skype say my voice is good quality.What is strange to me, the microphone I use with the Audigy SE has impedance?2200 ohm !http://www.easytouch.pl/product6074.PL.html?After I know the Audigy microphone impedance is 600 ohms, I am quite confused - it should not work well with 2200 ohm, but somehow it does.Could you comment it, please?Grtgs.

Audigy SB0570 And Modem - Prob

Hello, I am from Serbia and I don't speak English language very good. I was buy sound card Audigy SE SB0570 and when I listening music or working in audio programs and surfing on the Internet my computer is not functioning good. And only is restarting without warning... I am download new drivers from Creative site and when I install drivers problem is not fixed...
Please, help me... I have U.S. Robotics modem.
This problem...
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=62875#M62 875

Ban me and see if I care. I just think that people should know that the people at creative Labs have products that advertise being compatible with all windows oses and it is just not true.
banning me for telling the truth is confirmation of the fact.
I have heard that the truth hurts and I guess in this case it is true.
I have recieved no help and from reading other users posts I am not the only one.So go ahead it it nothing to me.
Have a nice day

Headphones and Win FM 5.31 no longer work after installing Audigy SE (Windows

[color="#ff0000"]I had the new Sound Blaster Audigy SE SB0570? installed in my computer. I have 2 front stereo speakers next to my computer monitor which are connected to the green output on the sound card and they work fine.
I get sound from Windows Media Player or either CD/DVD player. [color="#ff0000"]?[color="#ff0000"]But now my headphones, when plugged into the jacks in the front of my computer case?have no sound coming through. They will work from the same green output as my speakers use -- but that defeats the functionality and convenience of using headphones.[color="#ff0000"]?[color="#ff0000"]Is there another way to connect the headphones without having to share the same output as for the speakers ?[color="#ff0000"]I have tried using the other?2 outputs next to the green output -- but they don't work for the headphones.[color="#ff0000"]. ?[color="#ff0000"]I am having problems with my radio online. I am using winFM 5.3 and I can not get any sound though my speakers. I get sound from Windows Media Player or either CD/DVD player. [color="#ff0000"]?[color="#ff0000"]Help, please !!!![color="#ff0000"]?[color="#ff0000"]P.S.: when I installed the software cd, all went well except for this message:[color="#ff0000"]??"Windows Media Player 0"?? This version of Windows Media Technologies is incompatible with this version of windows. For more information, view the information at the Microsoft web site.[color="#ff0000"]??

Solved after reinstalling Win XP. Wasted too much time on trying other possible solutions.
Hope other people may learn something out of it.

Creative Sound Blaster 5.1 VX/Audigy SE/Value/Live! 24-bit 1.04.0090A

OS: Windows Vista / 7 / 8 / 8.1 / Vista-64 / 7-64 / 8-64 / 8.1-64
Drivers Version: 1.04.0090A
SB24_PCDRV_LB_1_04_0090a.exe
http://ccfiles.creative.com/manualdn...1_04_0090a.exe
Drivers for sound cards Creative Sound Blaster 5.1 VX (SB1071) Sound Blaster Audigy SE (SB0570) Sound Blaster Audigy SE (SB0571) Sound Blaster Audigy Value (SB0570) Sound Blaster Audigy Value (SB0571) and Sound Blaster Live! 24-bit (SB0410).
News:
- Updated digital certificates.

Originally Posted by magg
OS: Windows Vista / 7 / 8 / 8.1 / Vista-64 / 7-64 / 8-64 / 8.1-64
Drivers Version: 1.04.0090A
SB24_PCDRV_LB_1_04_0090a.exe
http://ccfiles.creative.com/manualdn...1_04_0090a.exe
Drivers for sound cards Creative Sound Blaster 5.1 VX (SB1071) Sound Blaster Audigy SE (SB0570) Sound Blaster Audigy SE (SB0571) Sound Blaster Audigy Value (SB0570) Sound Blaster Audigy Value (SB0571) and Sound Blaster Live! 24-bit (SB0410).
News:
- Updated digital certificates.
Hi magg,
Thanks for the update !
Cheers !

Sound blast audigy

i bought my pc a while ago was running fine, used the sound plug that i orginally saw and that worked but i noticed 4 other though, they for onboard i was away at uni'versity for most part of this computer life so far got back from uni'versity been playing fine but was wonder why i saw a soundMAX thing on my computer was like that for onboard soundcards.
so take a nosie to my shock i have been using onboard not my sound card, now i though hey ill see if i can get it to work, but i dont have the CD and when i download drivers it says cant find any device for this to install.
exact model is a audigy SE SB0570, took a while to find driver got them from here only found 2 but only download one process of doing other, i have already turned off my onboard and moved the card window noticed it was new device but cant find driver for it.
wondering if anyone has any clue or tips to get this to work or am i better off just getting a new card for cheap that will have all the stuff to work. i have to say my onboard sound seem fairly good (has troubles sometimes).

Raventhorn wrote:
I have a Sound Blast Audigy that is getting an IRQ of 8 while my GPU (Nvidia 6800 Ultra) is taking the same. I have problems from time to time with blue screens with the error being IRQL_NOT_LESS_OR_EQUAL and in my research determined it is because the two cannot share IRQ 8 or for that matter Creative cannot play nicely with any other IRQ shared item. SO how can I get my machine to change the IRQ? I cannot do it in Windows because it is all grayed out in the resources tab of Device Manager properties. I am not sure how to do it in my Bios (AwardBIOS from Phoenix). Anyone have any ideas?
You should not have sound card and video card sharing irq as that can cause serious problem. They both need individual irq. As mention earlier by other, you can try changing pci slot as far away from video card as possible. Change HAL to Advanced Configuration and Power Interface (ACPI) PC

Difference between SB0570 and SB041

Hi,
What is the difference between Audigy SE (SB0570) and Li've! 24bit (SB040) ?
Thanks in advance !

A scalable cluster is usually associated with HPC clusters but some might argue that Oracle RAC is this type of cluster. Where the workload can be divided up and sent to many compute nodes. Usually used for a vectored workload.
A failover cluster is where a standby system or systems are available to take the workload when needed. Usually used for scalar workloads.

No sound from Audigy SE ca

I am running XP SP2. We install the SE cards without any errors. Device mananger and the Sound options from control panel all show everything is hunky dorry. Yet I can't get any sound from the card. I have tried using both digital and analog speakers. We have removed and uninstalled the driver several times. We have tried many different SE cards in many different PCs. Our previous card was the Audigy Value and it worked fine. One of the oddball indicators that something is wrong (besides no sound) is that when you go to the sound panel and try to play sounds (like the asterisk beep) the play button changes to stop (as it should when a sound is playing), but the button never returns to the play icon (as it should when the sound is complete). This leads me to think that there is something wrong with the driver, but all the driver changes I try result in the same thing.

Hi there,I'm having the same problem as you with Win 2003 server on an Asus DSBF-DE server mainboard. Is your SB0570 Audigy SE plugged in a PCI X slot ( not a PCIe slot, tottaly? different interface ) ??Did some experimenting? since the Audigy SE (SB0570) is working in an Asus DSBV-D server mainboard with Win 2000 server and Win XP. The SB0570 working in the DSBV-D server board is plugged into a 5 volt PCI slot. It has PCIX slots but I can not experiment with those server systems. From my experiments, it appears that the SB0570 card does not work in PCIX slots. These are 3.3 volt PCI slots. The SB0570 does have the extra notch in the card-edge connector that suggest that the SB0570 is a uni'versal 3.3/5 volt PCI card and should work in a PCIX slot. I even installed Win XP pro on the DSBF-DE mainboard systen and it failed in the same way you have experienced. Talking with Asus Tech support, they said, according to their specifications,?that the SB0570 Audigy SE sound card is a PCI (5 volt) only card and will not work in a 3.3 volt PCIX slot. I searched the creative site for the specifications on the Audigy SE card and it does not say that it is a uni'versal 3.3/5 volt PCI card even though it will plug into a PCIX slot in your mainboard. I did find a European distributor that actually says it is a 3.3/5 volt? PCI interface. Since the Asus DSBV-D server board does not have a 5 volt PCI slot, we are at a standstill and may have to purchase a more expensi've PCIe sound card, most likely not Creative brand.

Creative Sound blaster 5.1 prob

Hi all,
I bought a creative sound blaster 5. sound card yesterday to replace my onboard realtek alc655 soundcard hoping that i can hear a sound? from my edifier m3350 5. speakers but it failed me.
I done the creative diagnostic, all had pass. Then I test the speaker, front left have no sounds but there is sound from the subwoofer (voice: "Front left"); center is perfect i can hear it; front right is the same as front left it is coming from the subwoofer. Rear left and rear right have no sounds at all.
This is also my problem with my onboard realtek alc655, i only have a sound with the center/subwoofer and front that is why i buy a creative sound card.
All are connected in proper way,
Green (soundblaster) Green (speaker) Front
Black (soundblaster) Black (speaker) Rear
orange (soundblaster) orange (speaker) Center/subwoofer
thanks in advance,
pip?

Originally Posted by magg
OS: Windows Vista / 7 / 8 / 8.1 / Vista-64 / 7-64 / 8-64 / 8.1-64
Drivers Version: 1.04.0090A
SB24_PCDRV_LB_1_04_0090a.exe
http://ccfiles.creative.com/manualdn...1_04_0090a.exe
Drivers for sound cards Creative Sound Blaster 5.1 VX (SB1071) Sound Blaster Audigy SE (SB0570) Sound Blaster Audigy SE (SB0571) Sound Blaster Audigy Value (SB0570) Sound Blaster Audigy Value (SB0571) and Sound Blaster Live! 24-bit (SB0410).
News:
- Updated digital certificates.
Hi magg,
Thanks for the update !
Cheers !

Daniel_k we need microphone effects in windows 7 please

Hi please we need new driver support EAX Console & Microphone like Concert Hall effects in windows 7
Karaoke_feature1.jpg
my sound Card is creative Audigy SE SB0570
please if u can just add EAX Console & karaoke .
i try driver SB Audigy Series recompiled Install u made Unofficial When I try to install a window installation says that the card is not supported
i just want EAX console & karaoke & mixer to set what u hear .... please please i wait u

Heya
Im not 100% sure how Daniel is supposed to help you with this.
If he is an employee at Creative it mite be out of his control to add EAX Presets back into the creative control panel.
But speaking of which. I recently upgraded from my X-Fi Xtreme Gamer to a Z and I am extremely annoied that Creative decided to remove EAX presets like Jazz Club etc I really like the EQ but it would be better to have both and be able to use both at the same time.
I am still looking for alteritive software that will allow me to pick or set a effect that will give me the live sound for my music like Jazz Club
If these features your asking for where once there, use the last driver you had that had these features available
Uninstall your drivers this way to unsure that they are completely gone.
DOWNLOAD EVERYTHING FROM CREATIVE THAT YOU MAY NEED FOR YOUR SOUND CARD BEFORE UNINSTALLING, E.G WAVESTUDIO ETC
Close any programs that can make sound, even steam. (A message from a friend will play a unwanted sound when uninstalling the driver, part of the driver component will then be in use and may not be able to be removed) This is a Common cause of errors. Thats why it tells you to ensure every program is closed before installing and uninstalling.
Open Control Panel, Then At the top where its says View By click the small arrow pointing down on the right side of "View By" and select small icons, Then select Programs and Features,
Remove Everything that says Creative starting with Creative Control Panel,
Before Restarting your Pc
Open Control Panel, Then Select Device Manager,
In Device Manager click the arrow pointing right on the left of "Sound Video and Game Controllers"
Then right click your Creative Sound card if its still there after uninstalling everything from the creative uninstaller.
If its still there Right click your sound card and select Uninstall. When the window pops up "TICK" the check box saying "Delete All The Software For This Device" "DO NOT PERFORM THIS STEP FIRST!!!!!!!!!!!!!!!!"
Restart the computer and install the Original latest driver that had the funcions you desire.
I haven't proof read this to check for spelling mistakes so sorry if there is any lol

Sound Blaster able to encode Dolby Digital 5.1 and abo

Hi there.
I recently buy a new motherboard without dolby digital encoding onboard (the older, nForce2 (asus a7n8x deluxe had that capability, the new one, doesnt, it is an asus a8n-sli premium)
I use the coaxial digital out to connect my computer to the home theatre with only one cable (that rules), also, enabling "cloning" allow me to listen using at least 4 speakers, instead of the two front ones.
Someone told me to buying a "cheap" sound blaster will do the trick.
My options are (from cheap to expensi've):
CREATIVE AUDIGY SE SB0570 OEM
CREATIVE AUDIGY SE SB0570 BOX
CREATIVE AUDIGY2 VALUE
CREATIVE S.BLASTER X-FI PLATINUM
CREATIVE S.BLASTER X-FI XTREME
For me, the best option is the SB0570 BOX. The Audigy2 VALUE have 2.5 times the price of it.
What do you recommend?
Thanks in advance!
Fa

Analog to Digital Conversion is exactly that: It translates the Analog input signal of eg. a microphone into a PCM digital signal, with 24-bit precision. That is essentially the Line-IN and the Microphone input. (Although for the microphone they tend to have lower precision but amplify the signal).
There is a sticky at the top of this forum which you should read to understand the difference between the various digital formats.
To make it clear: The Sound Blasters have an SPDIF output which can send digital signals. However it does not have a Dolby Digital compression engine, so it will either send uncompressed PCM signals if it has processed them before. If you have a source that is already in Dolby Digital then you can redirect it through the SPDIF output and get full surround sound. This ONLY happens on DVDs, because they come precompressed.
Everything that gets processed on the soundcard is outputted as PCM digital: For 6-channel audio there are 3 connections which end up on 3 DACs (Digital to Analog Converter) where the digital signal is then made into analog for the speakers to be able to play it. The SPDIF connection simply bypasses the DACs (the DACs of the receiver are used) but takes only connection, that of the front speakers.
Dolby Digital AC-3 is a compression mechanism, which compresses sound (much like mp3), so that it can fit in only one connection, where uncompressed only a stereo signal would pass. (In doing so, it also lowers quality!)
So: If you want to use a 7. speaker system with a Sound Blaster you have to go analog, which also means 3 cables (because they have 3 wires for the channels + ground). And I don't think Dolby or DTS supports more than 5. channels for the time being, so not even with Dolby Encoding onboard could you do it with one cable.

Confused about updating dri

I'd like to update, or at least search for an update to my soundcard, but I'm just not real sure what it is. running a directx diagnostic tool on my computer, it says its a SB Audigy Audio [B400]
I don't see that listed anywhere. Any feedback and help is much appreciated, and I apologize in advance if this has been asked before, or is in the wrong area of the forums. This is my first post to these message boards.
thanks

Hmmm.... Glad you had the older drivers that work to fall back on. I did notice that I had to remove the sound drivers thru the Device manager then manually clean up all the leftover files and folders that the "Add/Remove Programs" did not clear off my machine before installing the updated files manually.
?In my manual installation of the "drivers only" ( because I didn't need all the other media stuff ) for the audigy se SB0570 card there was a check box in the lower left corner of the install window that if checcked it will overwrite all the creative files. If you have that, then I would check it to overwrite so that there is not a mixture of old and new files for the update. There may be some leftovers in the registry, but I rather not play with registry files unless?I really really have to. If you have no problems with the older drivers, I would personally stick with themunless you would wnat to try a real clean install as? suggested above. In any case, make a new CD with the original drivers and the missing file so that you will have everything in one place when you need to reinstall again. That's about all I can suggest for now.... bcnu ?P.S. This must be your card: Sound Blaster Audigy 2 Value SB0400??The latest driver for XP is 02.09.006 dated 9 Oct 06?Message Edited by NbrSix on 0-23-200802: PM
Message Edited by NbrSix on 0-23-200802:36 PM

Sound blaster audigy ca0106 waltf sb0570

Hi there could anyone help me to find driver for sound blaster audigy ca006 waltf sb0570 ... could not find it on internet .. if anyone have some direct link to download it please send it to my mail [email protected] thx a million ..

,Re: sound blaster audigy ca006 waltf sb0570/Hi coolhandLuke...
I Think it may be Creative Sound Blaster Audigy Se/Value Card.... Search Daniel_k Pack in Sound Blaster forums for Latest Modded driver Current build "P7 Support Pack 2.7"..... It Supports Xp,Vista and Windows 7.... If u want Creative Default Drivers Here is the link...
http://support.creative.com/Products...VARSET=prodfaq:PRODFAQ_4257,VARSET=CategoryID:

Creative Soundblaster Audigy SB0570

Hi friends, start by apologizing for possible misspellings. Creative Soundblaster Audigy I have problems with SB0570. Since I bought this motherboard sound I had only 4 speakers sound without subwoofer and center. When I give test everything works properly. Maybe not something I set myself right in "Creative Audio Control Panel" or Winamp, I run Windows 7 and the latest drivers audio system Genius SW-5.1 3000 5.1 What should I do to work all satellites including subwoofer. I am attaching some photos with my settings. My hardware:
AMD Athlon II X3 455, 3300 MHz
ASRock 880G Pro3
1 x 4 GB DDR3 1333 Team Elite 1333
Western Digital 500GB SATA-III 7200rpm 16MB Caviar Blue KX
SAPPHIRE Radeon HD 6850 1GB GDDR5
Attached Images
1.JPG
(32.6 KB, 4 views)
2.JPG
(38.9 KB, 3 views)
3.JPG
(34.5 KB, 5 views)
4.JPG
(37.1 KB, 2 views)
5.JPG
(35.6 KB, 2 views)

Part. 2
Attached Images
6.JPG
(42.3 KB, 4 views)
7.JPG
(34.4 KB, 4 views)
8.JPG
(33.3 KB, 3 views)
Capture1.JPG
(40.0 KB, 3 views)
Capture.JPG
(45.5 KB, 3 views)

Audigy se sb0570 win_7 32_bit

Similar Messages

Maybe you are looking for